928 resultados para 1H-and 13C-NMR


Relevância:

100.00% 100.00%

Publicador:

Resumo:

A new series of chiral ferrosalen ligands was designed and synthesized. The special feature of the ferrosalen ligands is that the chirality originated from the planar chiral ferrocenyl structure. For most known salen ligands, chirality comes from central and axial chiral centers. The key building block for the construction of these ferrosalen ligands was synthesized stereoselectively by a chiral auxiliary approach. This approach does not consume any chiral material, and does not require chiral HPLC resolution. Using this method, nine ligands were prepared using ferrocene as the starting material. In addition, the steric hindrance was modulated by changing the cyclopentadienyl group to the more bulky pentamethylcyclopentadienyl- and pentaphenylcyclopentadienyl- groups. The structure of these ligands was established by 1H and 13C NMR. The structure of a ferrosalen-Cu (II) complex was determined by single crystal X-ray diffraction analysis. All the chiral ferrosalen ligands were tested in catalytic asymmetric reactions including enantioselective carbonyl-ene reaction, enantioselective Strecker-type reaction and enantioselective silylcyanation. For the carbonyl-ene reaction, up to 99% yield and 29% enantiomeric excess (ee) were obtained using ligand-Co (III) as the catalysts; For the Strecker-type reaction, a maximum of 20% ee was obtained using ligand-AlCl as the catalyst; For the silylcyanation reaction, up to 99% yield and 26% ee were obtained using ligand-AlCl as the catalyst.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

To avoid the undesired deprotonation during the addition of organolithium and organomagnesium reagents to ketones, the thioiminium salts, easily prepared from lactams and amides are converted into 2,2-disubstituted and 2-monosubstituted amines by reaction with simple nucleophiles such as organocerium and organocopper reagents. The reaction of thioiminium iodides with organocerium reagents derived by transmetalation of corresponding lithium reagents with anhydrous cerium(III) chloride has been investigated. These thioiminium iodides act as good electrophiles and accept alkylceriums towards bisaddition. The newly synthesized amines have been characterized by 1H and 13C NMR, IR and mass spectra. The amines have been converted into their hydrochlorides and characterized by COSY. These hydrochlorides have been subjected to antimicrobial screening with clinically isolated microorganisms, Staphylococcus aureus, Klebsiella pneumoniae, Pseudomonas aeruginosa, Salmonella typhi and Candida albicans. The hydrochlorides show quite good activity against these bacteria and fungus.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Chromatographic fractionation of the cytotoxic n-hexane extract of Hopea odorata Roxb. leaves led to the isolation of eight lupane triterpenes, which constitutes the first report of lupane-type triterpenes from this plant source. Furthermore, 3,30-dioxolup-20(29)-en-28-oic acid (6) was isolated for the first time from a natural source. Their structures were determined on the basis of spectroscopic methods, including 2D NMR analysis, and by comparison of their spectral data with literature values. Complete NMR assignments of the 1H and 13C NMR data were achieved for all compounds. Finally, the cytotoxic activities of the isolated compounds against four human cell lines (PC3, MDA-MB-231, HT-29 and HCT116) was also reported.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The research described in this thesis explored the synthesis tlnd characteristltion of biocompatible and biodegradable polymers of lactide through non-toxic titanium alkoxide nitiators. The research objectives focused on the preparation of polylactides in both solvent and solventless media, to produce materials with a wide range of molecular weights. The polylactides were fully characterised using gel permeation chromatography and 1H and 13C NMR spectroscopy. NMR spectroscopy was carried out in the study the reaction mechanisms. Kinetic studies of the ring opening polymerisation of lactide with titanium alkoxide initiators were also conducted using NMR spectroscopy. The objectives of this research were also focused on the enhancement of the flexibility of the polymer chains by synthesising random and block copolymers of lactide and ε-caprolactone using Ti(0-i-Pr)4 as an initiator, This work involved extensive characterisalion of the synthesised copolymers using gel permeation chromatography and 1H and 13C NMR spectroscopic analysis. Kinetic studies of the ring opening polymerisation of ε-caplrolactone and of the copolymerisation of lactide and ε-caprolactone with Ti(O-i-Pr)4 as an initiator were also carried out. The last section of this work involved the synthesis of block and star-shaped copolymers of lactide and poly(ethylene glycol) [PEG]. The preparation of lactide/PEG block copolymers was carried out by ring opening polymerisation of L-Iactide using Ti(O-i-Pr)4 as an initiator and hydroxyl-terminated PEG's with different numbers of hydroxyl groups as co-initiators both in solution and solventless media. These all-in-one polymersations yielded the synthesis of both lactide homopolymer and lactide/PEG block copolymer. In order to selectively synthesise copolymers of lactide and PEG, the experiment was carried out in two steps. The first step consisted of the synthesis of a titanium macro-initiator by exchanging the iso-propoxide ligands by PEG with different numbers of hydroxyl groups. The second step involved the ring opening polymerisation of lactide using the titanium macrocatalyst that was prepared as an initiator. The polymerisations were carried out in a solventless media. The synthesis of lactide/PEG copolymers using polyethylene glycol with amino terminal groups was also discussed. Extensive characterisation of the lactide block copolymers and macroinitiators was carried out using techniques such as, gel permeation chromatography (GPC), NMR spectroscopy and differential scanning calorimeter (DeS).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

By reacting 2- and 3-aminobenzoic acids (HL1 and HL2, respectively), as well as 2-, 3- and 4-((E)-2-[4-(dimethylamino)phenyl]diazenyl)benzoic acids (HL3, HL4 and HL5, in this order) with a n-butyltin(IV) source [ n BuSn(O)OH or n Bu2SnO], the drum-type butylstannoxane complexes of general composition [ n Bu6Sn6O6(L n )6] [L n =L1 (1), L2 (2) and L3 (3)] and the ladder-type compounds [ n Bu8Sn4O2(L n )4] [L n =L3 (5), L4 (6) and L5 (7)] were obtained and fully characterized. By reacting 1 with 2-((E)-[4-(dimethylamino)benzylidene]amino)benzoic acid (HL6), a co-crystal (4) was achieved which comprises the metal complex aggregate found in 1 and the neutral HL6 molecule. The solution properties of the compounds were assessed from 1H and 13C NMR studies and, for the metal complexes, also from 119Sn NMR. The molecular structures of 1, 2, 4-7 were confirmed by single-crystal X-ray diffraction. Compounds 1-3 and the complex moiety of 4 display hexameric Sn6O6 clusters with drum-like structures, but 5-7 reveal Sn4O2 cores with ladder-type structural motifs. Besides the observed relationship between the ligand N-functional group and obtained (drum- or ladder-type) assemblies, the relative position of the carboxylate group in the ligand itself influences its coplanarity.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Monopropiophenone thiocarbonohydrazone has been isolated in both linear and cyclic isomeric forms. Each form has been shown to isomerize and exist in equilibrium with the other in DMSO-d6 solution by 1H and 13C NMR spectroscopy. The kinetics of this transformation show attainment of equilibrium in approximately 6 h, with a linear to cyclic configuration ratio of 40:60.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The possible conformations of sialic acid were analysed using semi-empirical potential functions. The solid state conformation has approx. 0.2 kcal/mol higher energy than the minimum energy conformation. These studies suggest that in solution sialic acid may exist preponderantly in two different conformations which differ in the orientation of the terminal hydroxymethyl group of glycerol side-chain. The present model is consistent with 1H- and 13C-NMR data, but differs from the earlier models.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The autoxidation of conjugated linoleic acid (CLA) is poorly understood in spite of increasing interest in the beneficial biological properties of CLA and growing consumption of CLA-rich foods. In this thesis, the autoxidation reactions of the two major CLA isomers, 9-cis,11-trans-octadecadienoic acid and 10-trans,12-cis-octadecadienoic acid, are investigated. The results contribute to an understanding of the early stages of the autoxidation of CLA methyl ester, and provide for the first time a means of producing and separating intact CLA methyl ester hydroperoxides as well as basic knowledge on lipid hydroperoxides and their hydroxy derivatives. Conjugated diene allylic monohydroperoxides were discovered as primary autoxidation products formed during autoxidation of CLA methyl esters in the presence and absence of α-tocopherol. This established that one of the autoxidation pathways of CLA methyl ester is the hydroperoxide pathway. Hydroperoxides were produced from the two major CLA methyl esters by taking advantage of the effect of α-tocopherol to promote hydroperoxide formation. The hydroperoxides were analysed and separated first as methyl hydroxyoctadecadienoates and then as intact hydroperoxides by HPLC. The isolated products were characterized by UV, GC-MS, and NMR techniques. In the presence of a high amount of α-tocopherol, the autoxidation of CLA methyl ester yields six kinetically-controlled conjugated diene monohydroperoxides and is diastereoselective in favour of one particular geometric isomer as a pair of enantiomers. The primary autoxidation products produced from the two major CLA isomers include new positional isomers of conjugated diene monohydroperoxides, the 8-, 10-, 12-, and 14-hydroperoxyoctadecadienoates. Furthermore, two of these new positional isomers have an unusual structure for a cis,trans lipid hydroperoxide where the allylic methine carbon is adjacent to the cis instead of the usual trans double bond. The 1H and 13C NMR spectra of nine isomeric methyl hydroxyoctadecadienoates and of ten isomeric methyl hydroperoxyoctadecadienoates including the unusual cis,trans hydroperoxides, i.e. Me 8-OOH-9c,11t and Me 14-OOH-10t,12c, were fully assigned with the aid of 2D NMR spectroscopy. The assigned NMR data enabled determination of the effects of the hydroxyl and hydroperoxyl groups on the carbon chemical shifts of CLA isomers, identification of diagnostic signals, and determination of chemical shift differences of the olefinic resonances that may help with the assignment of structure to as yet unknown lipid hydroperoxides either as hydroxy derivatives or as intact hydroperoxides. A mechanism for the hydroperoxide pathway of CLA autoxidation in the presence of a high amount of α-tocopherol was proposed based on the characterized primary products, their relative distribution, and theoretical calculations. This is an important step forward in CLA research, where exact mechanisms for the autoxidation of CLA have not been presented before. Knowledge of these hydroperoxide formation steps is of crucial importance for understanding the subsequent steps and the different pathways of the autoxidation of CLA. Moreover, a deeper understanding of the autoxidation mechanisms is required for ensuring the safety of CLA-rich foods. Knowledge of CLA oxidation and how it differs from the oxidation of nonconjugated polyunsaturated fatty acids may also be the key to understanding the biological mechanisms of CLA activity.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The interaction of benzo-15-crown-5, dibenzo-18-crown-6 and dibenzo-24-crown-8 with 2-dicyanoethylene 1,3-indane dione in CH2Cl2 has been described in terms of the formation of 1 : 1 molecular complexes. The magnitude of association constants and thermodynamic parameters indicate cooperative interactions of oxygens with the acceptors. The 1H and 13C NMR spectra of the complexes show that gyama-gyama interactions are a major source of ground state stabilization in these complexes.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A new bis-indolyl-based colorimetric probe has been synthesized. This allows a Michael-type adduct formation for the detection of cyanide ions. The probe shows a remarkable color change from red to colorless upon addition of the cyanide ions in pure water. The cyanide ion reacts with the probe and removes the conjugation of the bis-indolyl moiety of the probe with that of the 4-substituted aromatic ring. This renders the probe colorless. The mechanism of the reaction of the probe with the cyanide ion was established by using 1H and 13C NMR spectroscopy, mass spectrometry, and kinetic studies.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fucoidan fractions from the brown seaweed Chorda filum were studied using solvolytic desulfation.Methylation analysis and NMR spectroscopy were applied for native and desulfated polysaccharides.Homefucan sulfate from C.filum was shown to contain poly-a-(1-3)-fucopyranoside backbone with a high degree of branching,mainly of a-(1-2)-linked single units.Some fucopyranose residues are sulfated at O-4(mainly) and O-2 positions.Some a-(1-3)-linked fucose residues were shown by NMR to be 2-O-acetylated.The 1H and 13C NMR spectra of desulfated,deaceylated fucan were complerely assigned.THe spectral data obtained correspond to a quasiregular polysaccharide structure with a branched hexasaccharide repeating unit.Other fucoidan frations from C.filum have more complex carbohydrate composition and give rather complex methvlation patterns.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

As 4-quinolonas e as acridonas são duas importantes famílias de compostos heterocíclicos azotados naturais que apresentam uma variedade de importantes aplicações biológicas. As 4-quinolonas têm sido objecto de extensos estudos devido às suas potenciais aplicações como fortes agentes citotóxicos, antimitóticos e anti-plaquetários e como protectores cardiovasculares, mas o seu uso é principalmente como antibióticos de largo espectro. As acridonas são conhecidas por apresentarem importante actividade antiviral, antiparasitária, contra a leishmania e a malária, e anticancerígena. A variedade de importantes aplicações biológicas das 4-quinolonas e das acridonas e a contínua procura pela comunidade científica de novas substâncias com actividades biológicas atractivas destaca estes compostos como alvos interessantes para a preparação de novos derivados e/ou para o desenvolvimento de novos métodos de síntese destas duas famílias de compostos. No primeiro capítulo desta dissertação descreve-se a síntese dos compostos de partida que tiveram de ser previamente preparados para o desenvolvimento das novas rotas de síntese apresentadas nos capítulos seguintes. A 4-cloro-3- formilquinolina foi obtida através da reacção de Vilsmeier-Haack da 2’-aminoacetofenona enquanto que a 3-formilquinolin-4(1H)-ona foi facilmente preparada por hidrólise ácida da anterior. Foi necessário proteger o grupo amina da quinolin-4(1H)-ona para evitar reacções secundárias e foram descritas as reacções de protecção com o grupo metilo, etoxicarbonilo e ptoluenossulfonilo. Os 2,2-dióxidos de 1,3-di-hidrobenzo[c]tiofeno, necessários para o estudo das reacções de Diels-Alder, não se encontram disponíveis comercialmente e a sua síntese é também descrita. No segundo capítulo reporta-se uma nova e eficiente rota de síntese de (Z)- e (E)-3-estirilquinolin-4(1H)-onas a partir da reacção de Wittig da 4-cloro-3- formilquinolina e de 3-formilquinolin-4(1H)-onas com benzilidenotrifenilfosforanos. As (Z)-3-estirilquinolin-4(1H)-onas foram obtidas com elevada diastereoselectividade a partir da reacção das 3-formilquinolin- 4(1H)-onas N-protegidas enquanto que as (E)-3-estirilquinolin-4(1H)-onas foram preparadas através da reacção de Wittig da 4-cloro-3-formilquinolina seguida da hidrólise ácida das respectivas (Z)- e (E)-4-cloro-3-estirilquinolinas obtidas. Ambas as rotas sintéticas são eficientes, independentemente dos substituintes dos benzilidenotrifenilfosforanos. No terceiro capítulo, descreve-se um novo método de síntese de novas benzo[b]acridonas a partir da reacção de Diels-Alder de 3-formilquinolin-4(1H)- onas N-protegidas, que actuam como dienófilos, com dienos altamente reactivos, os orto-benzoquinodimetanos, preparados in situ através da extrusão térmica do dióxido de enxofre dos respectivos 2,2-dióxidos de 1,3-dihidrobenzo[ c]tiofeno. A reacção de cicloadição das 3-formilquinolin-4(1H)-onas N-protegidas com orto-benzoquinodimetanos origina as benzo[b]-1,6,6a,12atetra- hidroacridin-12(7H)-onas esperadas, que são o resultado da referida cicloadição seguida de desformilação in situ, e mostrou ser eficiente apenas quando o grupo amina está derivatizado com um grupo sacador de electrões. A desidrogenação destas benzo[b]-1,6,6a,12a-tetra-hidroacridin-12(7H)-onas em dimetilsulfóxido utilizando uma quantidade catalítica de iodo foi também descrita e originou como produto principal as benzo[b]acridin-12(7H)-onas N-desprotegidas. Todos os compostos novos sintetizados foram caracterizados por diversas técnicas analíticas, especialmente por estudos espectroscópicos de ressonância magnética nuclear (RMN), incluindo espectros de 1H e 13C, bidimensionais de correlação espectroscópica homonuclear e heteronuclear e de efeito nuclear de Overhauser (NOESY). Foram também efectuados, sempre que possível, espectros de massa (EM) e análises elementares ou espectros de massa de alta resolução (EMAR) para todos os compostos novos sintetizados. O tautomerismo da 3-formil- e 3-estirilquinolin-4(1H)-onas e as isomerizações (E) (Z) e rotacional das 3-estirilquinolin-4(1H)-onas e das 4-cloro-3-estirilquinolinas foram estudados através de ressonância magnética nuclear experimental (RMN 1H e 13C) e teórica [B3LYP/6-311++G(d,p)].

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química e Biológica