Road traffic information platform for energy and emissions savings

Apesar das recentes inovações tecnológicas, o setor dos transportes continua a exercer impactes significativos sobre a economia e o ambiente. Com efeito, o sucesso na redução das emissões neste setor tem sido inferior ao desejável. Isto deve-se a diferentes fatores como a dispersão urbana e a existência de diversos obstáculos à penetração no mercado de tecnologias mais limpas. Consequentemente, a estratégia “Europa 2020” evidencia a necessidade de melhorar a eficiência no uso das atuais infraestruturas rodoviárias. Neste contexto, surge como principal objetivo deste trabalho, a melhoria da compreensão de como uma escolha de rota adequada pode contribuir para a redução de emissões sob diferentes circunstâncias espaciais e temporais. Simultaneamente, pretende-se avaliar diferentes estratégias de gestão de tráfego, nomeadamente o seu potencial ao nível do desempenho e da eficiência energética e ambiental. A integração de métodos empíricos e analíticos para avaliação do impacto de diferentes estratégias de otimização de tráfego nas emissões de CO2 e de poluentes locais constitui uma das principais contribuições deste trabalho. Esta tese divide-se em duas componentes principais. A primeira, predominantemente empírica, baseou-se na utilização de veículos equipados com um dispositivo GPS data logger para recolha de dados de dinâmica de circulação necessários ao cálculo de emissões. Foram percorridos aproximadamente 13200 km em várias rotas com escalas e características distintas: área urbana (Aveiro), área metropolitana (Hampton Roads, VA) e um corredor interurbano (Porto-Aveiro). A segunda parte, predominantemente analítica, baseou-se na aplicação de uma plataforma integrada de simulação de tráfego e emissões. Com base nesta plataforma, foram desenvolvidas funções de desempenho associadas a vários segmentos das redes estudadas, que por sua vez foram aplicadas em modelos de alocação de tráfego. Os resultados de ambas as perspetivas demonstraram que o consumo de combustível e emissões podem ser significativamente minimizados através de escolhas apropriadas de rota e sistemas avançados de gestão de tráfego. Empiricamente demonstrou-se que a seleção de uma rota adequada pode contribuir para uma redução significativa de emissões. Foram identificadas reduções potenciais de emissões de CO2 até 25% e de poluentes locais até 60%. Através da aplicação de modelos de tráfego demonstrou-se que é possível reduzir significativamente os custos ambientais relacionados com o tráfego (até 30%), através da alteração da distribuição dos fluxos ao longo de um corredor com quatro rotas alternativas. Contudo, apesar dos resultados positivos relativamente ao potencial para a redução de emissões com base em seleções de rotas adequadas, foram identificadas algumas situações de compromisso e/ou condicionantes que devem ser consideradas em futuros sistemas de eco navegação. Entre essas condicionantes importa salientar que: i) a minimização de diferentes poluentes pode implicar diferentes estratégias de navegação, ii) a minimização da emissão de poluentes, frequentemente envolve a escolha de rotas urbanas (em áreas densamente povoadas), iii) para níveis mais elevados de penetração de dispositivos de eco-navegação, os impactos ambientais em todo o sistema podem ser maiores do que se os condutores fossem orientados por dispositivos tradicionais focados na minimização do tempo de viagem. Com este trabalho demonstrou-se que as estratégias de gestão de tráfego com o intuito da minimização das emissões de CO2 são compatíveis com a minimização do tempo de viagem. Por outro lado, a minimização de poluentes locais pode levar a um aumento considerável do tempo de viagem. No entanto, dada a tendência de redução nos fatores de emissão dos poluentes locais, é expectável que estes objetivos contraditórios tendam a ser minimizados a médio prazo. Afigura-se um elevado potencial de aplicação da metodologia desenvolvida, seja através da utilização de dispositivos móveis, sistemas de comunicação entre infraestruturas e veículos e outros sistemas avançados de gestão de tráfego.

A creative approach to isometries integrating Geogebra and Italc with ‘paper and pencil’ environments

Creativity is recognized nowadays as a basic skill. However, the educational system fails in promoting their development. On the other hand, a growing acknowledgement of the importance of geometry emerges. Conceptual renewal, namely on isometries, requires new approaches based on mathematically significant tasks. The digital revolution has brought powerful tools but demands changes in the educational process. The use of Dynamic Geometry Environments (DGE), complementing ‘paper and pencil’, can contribute to provide rich learning environments, enhanced by Classroom Management Systems (CMS) such as iTALC. Indeed, the qualitative case study we carried out suggests that: the creation of an "atmosphere" of cooperation, collaboration and sharing seems to increase creativity dimensions; the use of DGE can facilitate the emergence of more creative productions; development of knowledge and geometrical capabilities seems to benefit from a complementary approach that combines DGE and ‘paper and pencil’ environments. Different approaches, with a more technological and exploratory nature seem to promote more favourable attitudes towards mathematics in general, and geometry, in particular.

Novel hardware and software combination for automotive motorsport vehicles based on direct processing of graphical functions

The main motivation for the work presented here began with previously conducted experiments with a programming concept at the time named "Macro". These experiments led to the conviction that it would be possible to build a system of engine control from scratch, which could eliminate many of the current problems of engine management systems in a direct and intrinsic way. It was also hoped that it would minimize the full range of software and hardware needed to make a final and fully functional system. Initially, this paper proposes to make a comprehensive survey of the state of the art in the specific area of software and corresponding hardware of automotive tools and automotive ECUs. Problems arising from such software will be identified, and it will be clear that practically all of these problems stem directly or indirectly from the fact that we continue to make comprehensive use of extremely long and complex "tool chains". Similarly, in the hardware, it will be argued that the problems stem from the extreme complexity and inter-dependency inside processor architectures. The conclusions are presented through an extensive list of "pitfalls" which will be thoroughly enumerated, identified and characterized. Solutions will also be proposed for the various current issues and for the implementation of these same solutions. All this final work will be part of a "proof-of-concept" system called "ECU2010". The central element of this system is the before mentioned "Macro" concept, which is an graphical block representing one of many operations required in a automotive system having arithmetic, logic, filtering, integration, multiplexing functions among others. The end result of the proposed work is a single tool, fully integrated, enabling the development and management of the entire system in one simple visual interface. Part of the presented result relies on a hardware platform fully adapted to the software, as well as enabling high flexibility and scalability in addition to using exactly the same technology for ECU, data logger and peripherals alike. Current systems rely on a mostly evolutionary path, only allowing online calibration of parameters, but never the online alteration of their own automotive functionality algorithms. By contrast, the system developed and described in this thesis had the advantage of following a "clean-slate" approach, whereby everything could be rethought globally. In the end, out of all the system characteristics, "LIVE-Prototyping" is the most relevant feature, allowing the adjustment of automotive algorithms (eg. Injection, ignition, lambda control, etc.) 100% online, keeping the engine constantly working, without ever having to stop or reboot to make such changes. This consequently eliminates any "turnaround delay" typically present in current automotive systems, thereby enhancing the efficiency and handling of such systems.

Object categorisations using templates constructed from multi-scale line and edge representations

Object categorisation is linked to detection, segregation and recognition. In the visual system, these processes are achieved in the ventral \what"and dorsal \where"pathways [3], with bottom-up feature extractions in areas V1, V2, V4 and IT (what) in parallel with top-down attention from PP via MT to V2 and V1 (where). The latter is steered by object templates in memory, i.e. in prefrontal cortex with a what component in PF46v and a where component in PF46d.

Tourism planning informatization

The Tourism activity, due to its own characteristics, causes high environmental impact and its development should be influenced by the environmental characteristics of each region. The Information Systems, mainly those which represent the geographical information, will permit the development of a design, allowing the Decision-Maker the consult, the management and the presentation of decision schemes based on the defined measures of the Tourism Planning of a region. As the information associated with this design should be real and update, the Internet should be used as a means of access to the information of the region. The design presents the schemes associated to each decision, offering competitive advantages to the Decision-Makers involved in the decision process, since it is possible to evaluate, foresee and control the future environmental impacts of Tourism.

GIS on tourism planning: preventing the impacts caused by the developing tourism activity in a specific site

The environment is one of the greatest concerns of humankind. Nowadays, the activities which improve or destroy it must be assessed and controlled by efficient means which should permit the control of environmental impact caused by the development of these activities. This document presents an information system implementation, as a Decision Support system, allowing the Decision Maker to evaluate, foresee and control the future environmental impact of Tourism through consultation, the management and the presentation of decision schemes based on defined measures of a regional tourism planning.

Implementation of a quality system in joint master programmes

Joint master programmes are systems which by default demand a proper quality system in order to sustain and improve. Objective of this thesis is analysing and proposing solutions to difficulties associated with the implementation of a quality management system to joint master programmes, with the focus on international joint master programmes. The application of the analysis to the Erasmus Mundus joint master programme European Master in Quality in Analytical Laboratories (EMQAL) is discussed. QA systems implementation in HEIs in Europe is an ongoing process, and implementation of such systems in JPs is one step further to enhancing quality in higher education in Europe. The issue closely discussed in this thesis is: should QMS be developed independently from the institutions, or should the institutions, when developing their quality management systems, take into account the (future) development of joint courses and prepare their quality procedures accordingly? A quality management system is normally developed for one organization, and different aspects of cooperation are considered within. A joint master programme is a result of successful cooperation of two or more organizations; therefore a development of its quality management system must be approached in a different manner. This thesis proposes a QMS with emphasis both on the HEI and the consortium. Different processes in the QMS can be managed independently at the level of the HEI or at the level of the consortium. Most processes in joint master programmes should be designed in programmes’ and institutions’ QMSs. Quality of a joint master programme cannot be analyzed separately from the higher education institutions which are organizing it. Comparative analysis of organization of one Erasmus Mundus Master programme to the solutions proposed in discussion showed that from all of the aspects considered, processes in EMQAL are organized in harmony with the proposed delegation of processes of the QMS for a joint master programme. The solutions proposed in the discussion are based on theoretical application of the quality principles and concepts. Comparison to the quality processes and procedures in an existing EM programme showed that analysis is applicable in practice.

Evaluation of the human factor in the scheduling of smart appliances in smart grids

Recently there has been an increase of interest in implementing a new set of home appliances, known as Smart Appliances that integrate Information Technologies, the Internet of Things and the ability of communicating with other devices. While Smart Appliances are characterized as an important milestone on the path to the Smart Grid, by being able to automatically schedule their loads according to a tariff or reflecting the power that is generated using renewable sources, there is not a clear understanding on the impact that the behavior of such devices will have in the comfort levels of users, when they shift their working periods to earlier, or later than, a preset time. Given these considerations, in this work we analyse the results of an assessment survey carried out to a group of Home Appliance users regarding their habits when dealing with these machines and the subjective impact in quality caused by either finishing its programs before or after the time limit set by the user. The results of this work are expected to be used as input for the evaluation of load scheduling algorithms running in energy management systems. © 2014 Springer International Publishing.

Aprendizagem baseada em projetos na consolidação de conceitos de programação de linguagens SCRIPT

Relatório da prática de ensino supervisionada, Mestrado em Ensino de Informática, Universidade de Lisboa, 2014

Towards Supplier Maturity Evaluation in Terms of PLM Collaboration

The product lifecycle management (PLM) system has a significant role to support the collaboration and manage the partnership between OEM and supplier to enable the success of supplier integration. Today great rates of cooperation as suppliers have been dedicated to SMEs. Since one of the PLM task is to control the collaboration between OEM and suppliers, this paper provide supplier (SMEs) a framework to find their level of relationship with OEM and the steps that they can improve it. To respond to this trend, we defined a methodology based on collaborative matrix maturity levels and four PLM axes of strategic, organization, process and tools levels. Finally, according to this matrix, we proposed a structure of a proper questionnaire and example that shows suppliers how to evaluate their positions in terms of collaboration in PLM.

An exploratory study of how a Korean chaebol’s learning culture facilitates customer service

This paper explains how the organizational learning concept is used by managers in a global Korean company to promote group work, information sharing and an open communication style in order to produce a high level of customer service. Previously collected data from a set of in-depth personal interviews undertaken with three senior managers in a Korean electronics company were analyzed and interpreted using the grounded theory approach, and a number of propositions are put forward. The research findings show that managers in a chaebol deploy organizational learning to identify skilled and knowledgeable staff, and improve the organization’s capability by placing emphasis on developing harmonious, mutually oriented relationships that permeate throughout the organization. Top management demand that staff identify with government economic objectives and align the organization’s strategy accordingly so that the products produced are marketable. To achieve this, the organization fosters continual interaction among managers throughout the organization’s hierarchy. The chaebol’s organizational learning model encapsulates a “corollary” (continual communication) and “tools” (cultural influence and relationship management), and manifests in a unique strategy that allows management systems to evolve naturally.

Responsabilidade ambiental: análise das divulgações ambientais das empresas do PSI-20 comparativamente com empresas não cotadas

Orientador: Mestre, António Pinto Marques

Enquadramento das instituições particulares de solidariedade social no actual sistema normativo: a importância do relato financeiro: caso “Santa Casa da Misericórdia de Vila Flor”

Dissertação para obtenção do Grau de Mestre em Contabilidade e Finanças Orientador: Mestre Armindo Fernando Sousa Lima

Análise de eficiência energética de transportes rodoviários

Projecto para obtenção do grau de Mestre em Engenharia Informática e de computadores

BabeLO : an extensible converter of programming exercises formats

In the last two decades, there was a proliferation of programming exercise formats that hinders interoperability in automatic assessment. In the lack of a widely accepted standard, a pragmatic solution is to convert content among the existing formats. BabeLO is a programming exercise converter providing services to a network of heterogeneous e-learning systems such as contest management systems, programming exercise authoring tools, evaluation engines and repositories of learning objects. Its main feature is the use of a pivotal format to achieve greater extensibility. This approach simplifies the extension to other formats, just requiring the conversion to and from the pivotal format. This paper starts with an analysis of programming exercise formats representative of the existing diversity. This analysis sets the context for the proposed approach to exercise conversion and to the description of the pivotal data format. The abstract service definition is the basis for the design of BabeLO, its components and web service interface. This paper includes a report on the use of BabeLO in two concrete scenarios: to relocate exercises to a different repository, and to use an evaluation engine in a network of heterogeneous systems.