Practical Quality Control: Comparision of Methods on the Quantification of Stationary Phases in Paper and Thin-Layer Chromatographic Systems

Introduction: Paper and thin layer chromatography methods are frequently used in Classic Nuclear Medicine for the determination of radiochemical purity (RCP) on radiopharmaceutical preparations. An aliquot of the radiopharmaceutical to be tested is spotted at the origin of a chromatographic strip (stationary phase), which in turn is placed in a chromatographic chamber in order to separate and quantify radiochemical species present in the radiopharmaceutical preparation. There are several methods for the RCP measurement, based on the use of equipment as dose calibrators, well scintillation counters, radiochromatografic scanners and gamma cameras. The purpose of this study was to compare these quantification methods for the determination of RCP. Material and Methods: 99mTc-Tetrofosmin and 99mTc-HDP are the radiopharmaceuticals chosen to serve as the basis for this study. For the determination of RCP of 99mTc-Tetrofosmin we used ITLC-SG (2.5 x 10 cm) and 2-butanone (99mTc-tetrofosmin Rf = 0.55, 99mTcO4- Rf = 1.0, other labeled impurities 99mTc-RH RF = 0.0). For the determination of RCP of 99mTc-HDP, Whatman 31ET and acetone was used (99mTc-HDP Rf = 0.0, 99mTcO4- Rf = 1.0, other labeled impurities RF = 0.0). After the development of the solvent front, the strips were allowed to dry and then imaged on the gamma camera (256x256 matrix; zoom 2; LEHR parallel-hole collimator; 5-minute image) and on the radiochromatogram scanner. Then, strips were cut in Rf 0.8 in the case of 99mTc-tetrofosmin and Rf 0.5 in the case of 99mTc-HDP. The resultant pieces were smashed in an assay tube (to minimize the effect of counting geometry) and counted in the dose calibrator and in the well scintillation counter (during 1 minute). The RCP was calculated using the formula: % 99mTc-Complex = [(99mTc-Complex) / (Total amount of 99mTc-labeled species)] x 100. Statistical analysis was done using the test of hypotheses for the difference between means in independent samples. Results:The gamma camera based method demonstrated higher operator-dependency (especially concerning the drawing of the ROIs) and the measures obtained using the dose calibrator are very sensitive to the amount of activity spotted in the chromatographic strip, so the use of a minimum of 3.7 MBq activity is essential to minimize quantification errors. Radiochromatographic scanner and well scintillation counter showed concordant results and demonstrated the higher level of precision. Conclusions: Radiochromatographic scanners and well scintillation counters based methods demonstrate to be the most accurate and less operator-dependant methods.

Water quality issues in rivers, lakes and reservoirs in Asian countries: an approach to the problems and the methodologies

Water covers over 70% of the Earth's surface, and is vital for all known forms of life. But only 3% of the Earth's water is fresh water, and less than 0.3% of all freshwater is in rivers, lakes, reservoirs and the atmosphere. However, rivers and lakes are an important part of fresh surface water, amounting to about 89%. In this Master Thesis dissertation, the focus is on three types of water bodies – rivers, lakes and reservoirs, and their water quality issues in Asian countries. The surface water quality in a region is largely determined both by the natural processes such as climate or geographic conditions, and the anthropogenic influences such as industrial and agricultural activities or land use conversion. The quality of the water can be affected by pollutants discharge from a specific point through a sewer pipe and also by extensive drainage from agriculture/urban areas and within basin. Hence, water pollutant sources can be divided into two categories: Point source pollution and Non-point source (NPS) pollution. Seasonal variations in precipitation and surface run-off have a strong effect on river discharge and the concentration of pollutants in water bodies. For example, in the rainy season, heavy and persistent rain wash off the ground, the runoff flow increases and may contain various kinds of pollutants and, eventually, enters the water bodies. In some cases, especially in confined water bodies, the quality may be positive related with rainfall in the wet season, because this confined type of fresh water systems allows high dilution of pollutants, decreasing their possible impacts. During the dry season, the quality of water is largely related to industrialization and urbanization pollution. The aim of this study is to identify the most common water quality problems in Asian countries and to enumerate and analyze the methodologies used for assessment of water quality conditions of both rivers and confined water bodies (lakes and reservoirs). Based on the evaluation of a sample of 57 papers, dated between 2000 and 2012, it was found that over the past decade, the water quality of rivers, lakes, and reservoirs in developing countries is being degraded. Water pollution and destruction of aquatic ecosystems have caused massive damage to the functions and integrity of water resources. The most widespread NPS in Asian countries and those which have the greatest spatial impacts are urban runoff and agriculture. Locally, mine waste runoff and rice paddy are serious NPS problems. The most relevant point pollution sources are the effluents from factories, sewage treatment plant, and public or household facilities. It was found that the most used methodology was unquestionably the monitoring activity, used in 49 of analyzed studies, accounting for 86%. Sometimes, data from historical databases were used as well. It can be seen that taking samples from the water body and then carry on laboratory work (chemical analyses) is important because it can give an understanding of the water quality. 6 papers (11%) used a method that combined monitoring data and modeling. 6 papers (11%) just applied a model to estimate the quality of water. Modeling is a useful resource when there is limited budget since some models are of free download and use. In particular, several of used models come from the U.S.A, but they have their own purposes and features, meaning that a careful application of the models to other countries and a critical discussion of the results are crucial. 5 papers (9%) focus on a method combining monitoring data and statistical analysis. When there is a huge data matrix, the researchers need an efficient way of interpretation of the information which is provided by statistics. 3 papers (5%) used a method combining monitoring data, statistical analysis and modeling. These different methods are all valuable to evaluate the water quality. It was also found that the evaluation of water quality was made as well by using other types of sampling different than water itself, and they also provide useful information to understand the condition of the water body. These additional monitoring activities are: Air sampling, sediment sampling, phytoplankton sampling and aquatic animal tissues sampling. Despite considerable progress in developing and applying control regulations to point and NPS pollution, the pollution status of rivers, lakes, and reservoirs in Asian countries is not improving. In fact, this reflects the slow pace of investment in new infrastructure for pollution control and growing population pressures. Water laws or regulations and public involvement in enforcement can play a constructive and indispensable role in environmental protection. In the near future, in order to protect water from further contamination, rapid action is highly needed to control the various kinds of effluents in one region. Environmental remediation and treatment of industrial effluent and municipal wastewaters is essential. It is also important to prevent the direct input of agricultural and mine site runoff. Finally, stricter environmental regulation for water quality is required to support protection and management strategies. It would have been possible to get further information based in the 57 sample of papers. For instance, it would have been interesting to compare the level of concentrations of some pollutants in the diferente Asian countries. However the limit of three months duration for this study prevented further work to take place. In spite of this, the study objectives were achieved: the work provided an overview of the most relevant water quality problems in rivers, lakes and reservoirs in Asian countries, and also listed and analyzed the most common methodologies.

Psychosocial factors as predictors of quality of life in chronic portuguese patients

Background - Chronic illnesses are diseases of long duration and generally of slow progression. They cause significant quality of life impairment. The aim of this study was to analyse psychosocial predictors of quality of life and of subjective well-being in chronic Portuguese patients. Methods - Chronic disease patients (n = 774) were recruited from central Portuguese Hospitals. Participants completed self-reported questionnaires assessing socio-demographic, clinical, psychosocial and outcome variables: quality of life (HRQL) and subjective well-being (SWB). MANCOVA analyses were used to test psychosocial factors as determinants of HRQL and SWB. Results - After controlling for socio-demographic and clinical variables, results showed that dispositional optimism, positive affect, spirituality, social support and treatment adherence are significant predictors of HRQL and SWB. Similar predictors of quality of life, such as positive affect, treatment adherence and spirituality, were found for subgroups of disease classified by medical condition. Conclusions - The work identifies psychosocial factors associated with quality of life. The predictors for the entire group of different chronic diseases are similar to the ones found in different chronic disease subgroups: positive affect, social support, treatment adherence and spirituality. Patients with more positive affect, additional social support, an adequate treatment adherence and a feel-good spirituality, felt better with the disease conditions and consequently had a better quality of life. This study contributes to understanding and improving the processes associated with quality of life, which is relevant for health care providers and chronic diseases support.

Sustentabilidade em escolas - um caso de estudo

Devido à actual conjuntura sócio económica e às crescentes preocupações ambientais e sociais houve a necessidade de construir e desenvolver indicadores de sustentabilidade que registassem e avaliassem o desempenho, ano após ano, da comunidade escolar, de modo a melhorá-lo, pois as escolas devem ser elas próprias, modelos de sustentabilidade. Os indicadores formulados e desenvolvidos são ferramentas de gestão pois facultam a identificação de prioridades, o estabelecimento de metas e a tomada de decisões além de possibilitarem a elaboração de um historial que pode ajudar a melhorar o desempenho económico, ambiental e social das escolas, de acordo com os três pilares do desenvolvimento sustentável. Foram aplicados, ao caso de estudo, os indicadores considerados mais relevantes, tendo em conta a globalidade da sua aplicação, a sua clareza, mensurabilidade, compreensibilidade e reprodutibilidade. Obtiveram-se 185 indicadores de eficiência distribuídos pelas áreas ambiental (46), social (85), económica (18) e ensino / aprendizagem (36) e 63 indicadores descritivos distribuídos pelas áreas social (39), económica (9) e ensino / aprendizagem (15). Através de um inquérito realizado para avaliar as expectativas globais da comunidade escolar e dos dados disponibilizados pelo gabinete de qualidade e pela administração da escola, que serviu de caso de estudo, conseguiram-se calcular 71% dos indicadores de eficiência e 70% dos indicadores descritivos propostos.

Quality assurance and quality control in mammography: a review of available guidance worldwide

Objectives - Review available guidance for quality assurance (QA) in mammography and discuss its contribution to harmonise practices worldwide. Methods - Literature search was performed on different sources to identify guidance documents for QA in mammography available worldwide in international bodies, healthcare providers, professional/scientific associations. The guidance documents identified were reviewed and a selection was compared for type of guidance (clinical/technical), technology and proposed QA methodologies focusing on dose and image quality (IQ) performance assessment. Results - Fourteen protocols (targeted at conventional and digital mammography) were reviewed. All included recommendations for testing acquisition, processing and display systems associated with mammographic equipment. All guidance reviewed highlighted the importance of dose assessment and testing the Automatic Exposure Control (AEC) system. Recommended tests for assessment of IQ showed variations in the proposed methodologies. Recommended testing focused on assessment of low-contrast detection, spatial resolution and noise. QC of image display is recommended following the American Association of Physicists in Medicine guidelines. Conclusions - The existing QA guidance for mammography is derived from key documents (American College of Radiology and European Union guidelines) and proposes similar tests despite the variations in detail and methodologies. Studies reported on QA data should provide detail on experimental technique to allow robust data comparison. Countries aiming to implement a mammography/QA program may select/prioritise the tests depending on available technology and resources.

Modeling Movement of Tourists : Tools and Application in São Miguel Island, Portugal

Tourism contributes to the development of many regions. Different factors affect the movement of tourists within a destination. Those factors are related to the tourist characteristics, like the time budgets, preferences or destination knowledge, and to the destination features, like the attraction characteristics or accessibility level. Tourist decisions aren’t always done in a rational way. Emotions add further complexity to the human decision process. The use of footpaths can play an important role in the satisfaction of tourists, helping them discover the territory and giving them access to different types of attractions. The existence of a mathematical model that integrates the main factors related to the movement of independent tourists within a destination, in a dynamic way, will make possible the creation of an adaptable software tool. This tool will meet the specific needs of tourists, allowing the use of the network in an optimal way by the different tourist profiles, and the needs of the regional government and business, permitting better decisions and the offer of relevant tourism products. This article identifies the main tourists’ mobility criteria in the São Miguel island territory, Azores, Portugal, recognizes the necessary modelling process and identifies the basis for the construction of the mathematical model that explains the movement of tourists within the destination.

Aplicação da metodologia Kaizen aos processos de produção e logística da Polisport

A metodologia Kaizen, originária do Japão, tem como significado “melhorar continuamente” e ao longo da sua existência tem sido aplicada com grande sucesso em várias empresas, existindo três aspectos fundamentais para sua aplicabilidade: um melhor serviço ao cliente, uma melhor qualidade dos seus produtos e na redução dos custos pela via da eliminação dos desperdícios. Neste sentido, a dissertação propõe a aplicação da metodologia e ferramentas Kaizen ao contexto real da empresa Polisport. Esta empresa integra o Grupo Polisport e tem como seu núcleo principal a obtenção de materiais, montagem e comercialização de artigos finais para bicicleta, moto e automóvel. Neste contexto, o presente trabalho reflecte o estudo de técnicas de criação de valor interno, tendo em vista o aumento da produtividade dos seus processos produtivos. É realçado ainda a complementaridade da metodologia Kaizen com o estudo dos tempos e métodos, distinguindo o balanceamento e a ergonomia de postos de trabalho directamente relacionado com a eficiência do operário.

Simulação da aplicação da metodologia Balanced Scorecard numa PME: O estudo do caso PME-T.H.

Mestrado em Contabilidade

Factors associated to quality of life in active elderly

OBJECTIVE: To analyze whether quality of life in active, healthy elderly individuals is influenced by functional status and sociodemographic characteristics, as well as psychological parameters. METHODS: Study conducted in a sample of 120 active elderly subjects recruited from two open universities of the third age in the cities of São Paulo and São José dos Campos (Southeastern Brazil) between May 2005 and April 2006. Quality of life was measured using the abbreviated Brazilian version of the World Health Organization Quality of Live (WHOQOL-bref) questionnaire. Sociodemographic, clinical and functional variables were measured through crossculturally validated assessments by the Mini Mental State Examination, Geriatric Depression Scale, Functional Reach, One-Leg Balance Test, Timed Up and Go Test, Six-Minute Walk Test, Human Activity Profile and a complementary questionnaire. Simple descriptive analyses, Pearson's correlation coefficient, Student's t-test for non-related samples, analyses of variance, linear regression analyses and variance inflation factor were performed. The significance level for all statistical tests was set at 0.05. RESULTS: Linear regression analysis showed an independent correlation without colinearity between depressive symptoms measured by the Geriatric Depression Scale and four domains of the WHOQOL-bref. Not having a conjugal life implied greater perception in the social domain; developing leisure activities and having an income over five minimum wages implied greater perception in the environment domain. CONCLUSIONS: Functional status had no influence on the Quality of Life variable in the analysis models in active elderly. In contrast, psychological factors, as assessed by the Geriatric Depression Scale, and sociodemographic characteristics, such as marital status, income and leisure activities, had an impact on quality of life.

Happiness, hope, and affection as predictors of quality of life and functionality of individuals with heart failure at three-month follow-up

The scientific evidence supporting the management of the chronically ill in a positive psychological perspective in opposition to traditional pathological approach is scarce. This study examines issues associated with recovery of health status in heart failure, in particular hope, affection, and happiness. We use a longitudinal study of 128 symptomatic patients who after medical intervention reported improved quality of life and function at 3-month follow-up. We evaluated the contribution of happiness, hope and affection, individually and as a whole, in the quality of life and functionality of individuals with heart failure. Happiness (Subjective Happiness Scale), Hope (HOPE Scale), and affection (PANAS (positive and negative affect schedule)) were determined before medical intervention. Individually, we found that happiness is correlated with the quality of life and functionality, hope to self-efficacy dimension of the quality of life scale, positive affect to functionality and negative affect with symptoms dimension, quality of life dimension, and overall sum of the quality of life scale. Overall, we found that happiness has a unique contribution to the quality of life, except in self-efficacy dimension where hope takes this contribution and positive affect has a unique contribution to the functionality in this short-term follow-up. The results highlight the importance of positive variables to health outcomes for people with heart failure and should be considered in intervention programs for this syndrome.

Implementação de um sistema seguro, robusto e redundante

Um dos temas mais debatidos na sociedade actual é a segurança. Os níveis de segurança e as ferramentas para os alcançar entram em contraponto com os métodos usados para os quebrar. Como no passado, a razão qualidade/serviço mantém-se hoje, e manter-se-á no futuro, assegurando maior segurança àqueles que melhor se protejam. Problemas simples da vida real como furtos ou uso de falsa identidade assumem no meio informático uma forma rápida e por vezes indetectável de crime organizado. Neste estudo são investigados métodos sociais e aplicações informáticas comuns para quebrar a segurança de um sistema informático genérico. Desta forma, e havendo um entendimento sobre o Modus Operandi das entidades mal-intencionadas, poderá comprovar-se a instabilidade e insegurança de um sistema informático, e, posteriormente, actuar sobre o mesmo de tal forma que fique colocado numa posição da segurança que, podendo não ser infalível, poderá estar muito melhorada. Um dos objectivos fulcrais deste trabalho é conseguir implementar e configurar um sistema completo através de um estudo de soluções de mercado, gratuitas ou comerciais, a nível da implementação de um sistema em rede com todos os serviços comuns instalados, i.e., um pacote “chave na mão” com serviços de máquinas, sistema operativo, aplicações, funcionamento em rede com serviços de correio electrónico, gestão empresarial, anti-vírus, firewall, entre outros. Será possível então evidenciar uma instância de um sistema funcional, seguro e com os serviços necessários a um sistema actual, sem recurso a terceiros, e sujeito a um conjunto de testes que contribuem para o reforço da segurança.

Visualização e manipulação de informação em ambientes 3D imersivos

Ainda antes da invenção da escrita, o desenho foi utilizado para descrever a realidade, tendo evoluído ao longo dos tempos, ganhando mais qualidade e pormenor e recorrendo a suportes cada vez mais evoluídos que permitissem a perpetuação dessa imagem: dessa informação. Desde as pinturas rupestres, nas paredes de grutas paleolíticas, passando pelos hieróglifos, nos templos egípcios, nas gravuras das escrituras antigas e nos quadros sobre tela, a intenção sempre foi a de transmitir a informação da forma mais directa e perceptível por qualquer indivíduo. Nos dias de hoje as novas tecnologias permitem aceder à informação com uma facilidade nunca antes vista ou imaginada, estando certamente ainda por descobrir outras formas de registar e perpetuar a informação para as gerações vindouras. A fotografia está na origem das grandes evoluções da imagem, permitindo capturar o momento, tornando-o “eterno”. Hoje em dia, na era da imagem digital, além de se mostrar a realidade, é possível incorporar na imagem informação adicional, de modo a enriquecer a experiência de visualização e a maximizar a aquisição do conhecimento. As possibilidades da visualização em três dimensões (3D) vieram dar o realismo que faltava ao formato de fotografia original. O 3D permite a imersão do espectador no ambiente que, a própria imagem retrata, à qual se pode ainda adicionar informação escrita ou até sensorial como, por exemplo, o som. Esta imersão num ambiente tridimensional permite ao utilizador interagir com a própria imagem através da navegação e exploração de detalhes, usando ferramentas como o zoom ou ligações incorporados na imagem. A internet é o local onde, hoje em dia, já se disponibilizam estes ambientes imersivos, tornando esta experiência muita mais acessível a qualquer pessoa. Há poucos anos ainda, esta prática só era possível mediante o recurso a dispositivos especificamente construídos para o efeito e que, por isso, apenas estavam disponíveis a grupos restritos de utilizadores. Esta dissertação visa identificar as características de um ambiente 3D imersivo e as técnicas existentes e possíveis de serem usadas para maximizar a experiência de visualização. Apresentar-se-ão algumas aplicações destes ambientes e sua utilidade no nosso dia-a-dia, antevendo as tendências futuras de evolução nesta área. Serão apresentados exemplos de ferramentas para a composição e produção destes ambientes e serão construídos alguns modelos ilustrativos destas técnicas, como forma de avaliar o esforço de desenvolvimento e o resultado obtido, comparativamente com formas mais convencionais de transmitir e armazenar a informação. Para uma avaliação mais objectiva, submeteram-se os modelos produzidos à apreciação de diversos utilizadores, a partir da qual foram elaboradas as conclusões finais deste trabalho relativamente às potencialidades de utilização de ambientes 3D imersivos e suas mais diversas aplicações.

10 kVp rule – An anthropomorphic pelvis phantom imaging study using a CR system: impact on image quality and effective dose using AEC and manual mode

Purpose - This study aims to investigate the influence of tube potential (kVp) variation in relation to perceptual image quality and effective dose (E) for pelvis using automatic exposure control (AEC) and non-AEC in a Computed Radiography (CR) system. Methods and materials - To determine the effects of using AEC and non-AEC by applying the 10 kVp rule in two experiments using an anthropomorphic pelvis phantom. Images were acquired using 10 kVp increments (60–120 kVp) for both experiments. The first experiment, based on seven AEC combinations, produced 49 images. The mean mAs from each kVp increment were used as a baseline for the second experiment producing 35 images. A total of 84 images were produced and a panel of 5 experienced observers participated for the image scoring using the two alternative forced choice (2AFC) visual grading software. PCXMC software was used to estimate E. Results - A decrease in perceptual image quality as the kVp increases was observed both in non-AEC and AEC experiments, however no significant statistical differences (p > 0.05) were found. Image quality scores from all observers at 10 kVp increments for all mAs values using non-AEC mode demonstrates a better score up to 90 kVp. E results show a statistically significant decrease (p = 0.000) on the 75th quartile from 0.37 mSv at 60 kVp to 0.13 mSv at 120 kVp when applying the 10 kVp rule in non-AEC mode. Conclusion - Using the 10 kVp rule, no significant reduction in perceptual image quality is observed when increasing kVp whilst a marked and significant E reduction is observed.

Aplicação de metodologias lean na manutenção da simoldes aços

O trabalho presente nesta dissertação incidiu sobre a aplicação das metodologias Lean no âmbito da manutenção de uma empresa metalomecânica de produção de Moldes – Simoldes Aços. No atual enquadramento, com os mercados nacionais e internacionais debaixo de feroz competição, as empresas são obrigadas a estudar métodos e técnicas que permitam eliminar desperdícios, reduzir custos e tempos de produção, ao mesmo tempo que são exigidos maiores níveis de qualidade dos produtos fabricados com vista ao aumento da competitividade. Sendo a Manutenção uma área funcional com um impacto elevado no desempenho da produção, é percebido que o desempenho desta, tem influência direta no comportamento do fluxo produtivo e nos respetivos níveis de eficácia e eficiência. No decorrer do trabalho desta dissertação de mestrado foi realizada uma análise abrangente do estado atual do sector de atividade de manutenção na empresa SIMOLDES SA, o que permitiu identificar as áreas e os pontos a intervir e desenhar as soluções de melhoria na atividade de manutenção. Na fase concludente do trabalho foram implementadas algumas dessas propostas de melhoria, ao passo que outras ficaram agendadas para futura implementação. Na base do trabalho desenvolvido esteve a metodologia Lean, que apresenta um papel relevante na implementação de uma abordagem integrada da função manutenção na manutenção dos objetivos da produção. O presente projeto baseou a sua estratégia de implementação na aplicação da ferramenta do 5S’ em paralelo com o TPM (Total Productive Maintenance). Ambas as ferramentas visam a redução de desperdícios e o aumento da fiabilidade dos processos, pelo aumento da disponibilidade dos equipamentos, da melhoria do desempenho dos processos e da plena integração de todos os colaboradores no processo de fabrico. Com a implementação das melhorias propostas, foram observados melhorias significativas no fluxo das atividades da manutenção, assim como uma maior visibilidade das mesmas em todo o processo produtivo.