Supernovae and radio transients in M82

We present optical and near-infrared (NIR) photometry and NIR spectroscopy of SN 2004am, the only optically detected supernova (SN) in M82. These demonstrate that SN 2004am was a highly reddened Type II-P SN similar to the low-luminosity Type II-P events such as SNe 1997D and 2005cs. We show that SN 2004am was located coincident with the obscured super star cluster M82-L, and from the cluster age infer a progenitor mass of 12{^{+ 7}_{- 3}} M⊙. In addition to this, we present a high spatial resolution Gemini-North Telescope K-band adaptive optics image of the site of SN 2008iz and a second transient of uncertain nature, both detected so far only at radio wavelengths. Using image subtraction techniques together with archival data from the Hubble Space Telescope, we are able to recover a NIR transient source coincident with both objects. We find the likely extinction towards SN 2008iz to be not more than AV ˜ 10. The nature of the second transient remains elusive and we regard an extremely bright microquasar in M82 as the most plausible scenario.

Neural Network Based Attack on a Masked Implementation of AES

Masked implementations of cryptographic algorithms are often used in commercial embedded cryptographic devices to increase their resistance to side channel attacks. In this work we show how neural networks can be used to both identify the mask value, and to subsequently identify the secret key value with a single attack trace with high probability. We propose the use of a pre-processing step using principal component analysis (PCA) to significantly increase the success of the attack. We have developed a classifier that can correctly identify the mask for each trace, hence removing the security provided by that mask and reducing the attack to being equivalent to an attack against an unprotected implementation. The attack is performed on the freely available differential power analysis (DPA) contest data set to allow our work to be easily reproducible. We show that neural networks allow for a robust and efficient classification in the context of side-channel attacks.

Implication of modified molecular structure of lipid through heat-related process to fatty acids supply in Brassica carinata seed.

This study was conducted to explore the effect of different autoclave heating times (30, 60 and 90 min) on fatty acids supply and molecular stability in Brassica carinata seed. Multivariate spectral analyses and correlation analyses were also carried out in our study. The results showed that autoclaving treatments significantly decreased the total fatty acids content in a linear fashion in B. carinata seed as heating time increased. Reduced concentrations were also observed in C18:3n3, C20:1, C22:1n9, monounsaturated fatty acids (MUFA), polyunsaturated fatty acids (PUFA), omega 3 (ω-3) and 9 (ω-9) fatty acids. Correspondingly, the heated seeds showed dramatic reductions in all the peak intensities within lipid-related spectral regions. Results from agglomerative hierarchical cluster analysis (AHCA) and principal component analysis (PCA) indicated that the raw oilseed had completely different structural make-up from the autoclaved seeds in both CH3 and CH2 asymmetric and symmetric stretching region (ca. 2999–2800 cm−1) and lipid ester Cdouble bond; length as m-dashO carbonyl region (ca. 1787–1706 cm−1). However, the oilseeds heated for 30, 60 and 90 min were not grouped into separate classes or ellipses in all the lipid-related regions, indicating that there still exhibited similarities in lipid biopolymer conformations among autoclaved B. carinata seeds. Moreover, strong correlations between spectral information and fatty acid compositions observed in our study could imply that lipid-related spectral parameters might have a potential to predict some fatty acids content in oilseed samples, i.e. B. carinata. However, more data from large sample size and diverse range would be necessary and helpful to draw up a final conclusion.

Preparation of new materials by heterogeneous modification of cellulose

O presente trabalho teve como principal objectivo estudar a modificação química heterogénea controlada de fibras de celulose com diferentes reagentes de modo a alterar as suas propriedades de superfície, em especial em termos da criação de um carácter hidrofóbico e lipofóbico, preservando, sempre que possível, as suas propriedades mecânicas e, consequentemente, abrindo novas perspectivas de aplicação. O desenvolvimento do trabalho envolveu três abordagens principais, envolvendo, em cada caso, o estudo de diferentes condições reaccionais. Na primeira abordagem foram utilizados como reagentes de modificação compostos perfluorados, nomeadamente o anidrido trifluoroacético (TFAA), o cloreto de 2,3,4,5,6-pentafluorobenzoílo (PFBz) e o cloreto de 3,3,3- trifluoropropanoílo (TFP), para promover a acilação heterogénea da superfície das fibras. A segunda estratégia usada consistiu na preparação de híbridos de celulose do tipo orgânico-inorgânico classe-II, através da modificação das fibras de celulose com o (3-isocianatopropil)trietoxissilano (ICPTEOS), um reagente organossilano bifuncional. A ligação às fibras de celulose foi efectuada através das funções isocianato e, posteriormente, os grupos etoxissilano foram sujeitos a tratamentos de hidrólise ácida, como tal ou na presença de outros siloxanos, nomeadamente o tetraetoxissilano (TEOS) e o 1H,1H,2H,2Hperfluorodeciltrietoxissilano (PFDTEOS). Finalmente, a última abordagem foi baseada na modificação das fibras com triclorometilssilano (TCMS), através de uma reacção gás-sólido, que dispensou assim o uso de solventes orgânicos. A ocorrência de modificação química foi em cada caso confirmada por Espectroscopia de Infravermelho com Transformada de Fourier e Reflectância Total Atenuada (FTIR-ATR), Análise Elementar (EA) e determinação de ângulos de contacto. Adicionalmente, e dependendo de cada caso específico, diversas outras técnicas foram empregues na caracterização aprofundada dos materiais preparados, nomeadamente Ressonância Magnética Nuclear CPMAS no Estado Sólido (RMN), Espectroscopia de Difracção de Raios-X (XRD), Análise Termogravimétrica (TGA), Espectrometria de Massa de Iões Secundários com Análise de Tempo de Vôo (ToF-SIMS), Espectroscopia Fotoelectrónica de Raios-X (XPS) e Microscopia Electrónica de Varrimento (SEM). Relativamente à acilação das fibras de celulose com reagentes perfluorados, o sucesso da reacção foi comprovado por FTIR-ATR, EA, XPS e ToF-SIMS. Neste contexto, obtiveram-se fibras modificadas possuindo graus de substituição (DS) compreendidos entre 0.006 e 0.39. Verificou-se por XRD que, em geral, mesmo para os valores de DS mais elevados, a cristalinidade das fibras não foi afectada, indicando que a modificação foi limitada às camadas mais superficiais das mesmas ou a regiões amorfas das suas camadas mais internas. Adicionalmente, observou-se por ToF-SIMS que a distribuição dos grupos perfluorados à superfície das fibras foi, de facto, bastante heterogénea. Todos os derivados de celulose perfluorados apresentaram elevada hidrofobicidade e lipofobicidade, tendo-se atingido ângulos de contacto com água e diiodometano de 126º e 104º, respectivamente. Um aspecto interessante relativo a estes materiais é que a elevada omnifobicidade foi observada mesmo para valores de DS muito reduzidos, não se mostrando significativamente afectada pelo aumento dos mesmos. Em consonância, verificou-se por XPS que a cobertura da superfície das fibras de celulose com grupos perfluorados aumentou apenas ligeiramente com o aumento do DS, apontando para a esterificação de camadas mais internas das fibras, associada, neste caso, predominantemente aos seus domínios amorfos. No que diz respeito à estabilidade hidrolítica destes derivados, obtiveram-se dois tipos distintos de comportamento. Por um lado, as fibras de celulose trifluoroacetiladas são facilmente hidrolisáveis em meio neutro, e, por outro, as fibras pentafluorobenzoiladas e trifluoropropanoiladas mostram-se bastante resistentes face a condições de hidrólise em meio neutro e ácido (pH 4), podendo, contudo, ser facilmente hidrolisadas em meio alcalino (pH 9 e 12, para derivados do PFBz e do TFP, respectivamente). Na segunda abordagem verificou-se a ocorrência de reacção por FTIR-ATR e EA. Em geral, a modificação química com ICPTEOS ocorre predominantemente nas zonas mais superficiais das fibras de celulose ou em regiões amorfas. Contudo, em condições reaccionais mais severas (maior quantidade de reagente e tempo de reacção), esta atingiu também regiões cristalinas, afectando, consequentemente, a estrutura cristalina das fibras, como verificado por XRD. Por RMN de 29Si observou-se que após reacção com o ICPTEOS já existiam indícios de alguma hidrólise dos grupos etoxissilano, e que a sua subsequente condensação parcial tinha levado à formação de uma película inorgânica em redor das fibras (verificado por SEM), constituída maioritariamente por estruturas lineares, com uma contribuição mais modesta de estruturas “diméricas” e outras mais ramificadas. Consequentemente, este revestimento inorgânico transformou as fibras de celulose em materiais híbridos com elevada hidrofobicidade (ângulos de contacto com água entre 103-129º). A hidrólise ácida dos restantes grupos etoxissilano, como tal ou na presença de TEOS, originou híbridos de celulose com elevada hidrofilicidade, sendo impossível medirem-se os ângulos de contacto com água dos produtos finais, devido à presença maioritária de grupos silanol (Si-OH) e ligações Si-O-Si à superfície, os quais contribuíram para o consequente aumento de energia de superfície. No entanto, quando a hidrólise foi realizada na presença de PFDTEOS, obtiveram-se materiais híbridos com elevada hidrofobicidade e lipofobicidade (ângulos de contacto com água e diiodometano de 140º e 134º, respectivamente), devido à combinação da presença de grupos perfluorados e micro- e nano-rugosidades na superfície das fibras de celulose, conforme confirmado por SEM. Finalmente, a última abordagem permitiu preparar materiais derivados de celulose altamente hidrofóbicos e lipofóbicos (ângulos de contacto com água e diiodometano de 136º e 109º, respectivamente) por um processo simples, envolvendo tempos de tratamento tão curtos como 0.5 min. Este comportamento omnifóbico foi gerado pelo efeito sinergético entre a diminuição de energia de superfície das fibras, devido à presença de grupos metilo dos resíduos de TCMS ligados a estas, e a condensação dos resíduos de TCMS na forma de micro- e nano-partículas inorgânicas, que levou à criação de um revestimento rugoso à superfície das fibras, conforme observado por RMN de 29Si e SEM, respectivamente. A pré-humidificação das fibras de celulose demonstrou desempenhar um importante papel de “acelerador” dos processos de hidrólise e condensação das moléculas de TCMS. Nestas condições, o tempo de tratamento foi um dos parâmetros mais relevantes, pois para tempos de tratamento muito curtos (0.5 min) os materiais resultantes não apresentaram quaisquer diferenças a nível de propriedades físico-químicas em relação ao substrato de partida (a humidade em excesso consumiu todo o TCMS antes que este conseguisse reagir com os grupos hidroxilo das fibras de celulose), possuindo, por exemplo, valores de ângulos de contacto com água idênticos. Para tempos de tratamento mais longos, como 30 min, os materiais finais apresentaram a maior quantidade de componentes inorgânicos, tal como verificado por EA e TGA. Assim, o controlo da humidade das fibras é imperativo para se poder moldar as propriedades finais dos produtos. Esta última abordagem é particularmente promissora uma vez que tem como base um sistema simples e “verde” que pode ser facilmente implementado. Em conclusão, este trabalho permitiu demonstrar que a modificação química heterogénea controlada das fibras de celulose representa uma iniciativa promissora para a preparação de novos materiais obtidos a partir de recursos renováveis, com propriedades interessantes e passíveis de ser potencialmente aplicados em diferentes áreas. Para além do mais, as estratégias de modificação estudadas podem também ser precursoras de novos estudos que possam vir a ser desenvolvidos dentro do mesmo âmbito.

Evaluation of fruit and seed diversity and characterization of carob (Ceratonia siliqua L.) cultivars in Algarve region

The genetic diversity of 15 carob ( Ceratonia siliqua L.) cultivars located in an experimental field from Algarve (Portugal) was evaluated over 7 years using 12 fruit and seed phenotypic characters, in order to characterize carob cultivars. The values of morphological traits obtained by cultiv ar were compared with those from other countries of the Mediterranean basin. Statistically significant differences were found between cultivars for al l characters which were examined, what indicates a high genetic diversity. The relationship among these characters was analyzed by principal component analysis (PCA) resulting in the separation of these cultivars classed in four groups (clusters I–IV) and in four ungrouped cultivars. A three dimension of the model was found to be significant and explained 74.5% of the total variation, in which the first component accounting for 34.6% of the total variation is dominated by fruit characters, while the second component is dominated by seed characters. Cultivars plotted on the left-lower quadrant on the space determined by principal components 1 and 2 are characterized by fruits with high seed yield more appropriated for industrial rentability. The correlation analyses established by cultivar provided a specific understanding about the way how fruit and seed characteristics correlate within each cultivar. This approach can be useful for the development of a breeding programme, aiming to increase the seed yield, seed thickness, individual and total seed weight by fruit, characteristics that are determinant to improve the industrial exploitation of carob.

Fate Hazardous elements in soils surrounding a coal-fired power plant complex

Proceedings of the 13th International UFZ-Deltares Conference on Sustainable Use and Management of Soil, Sediment and Water Resources - 9–12 June 2015 • Copenhagen, Denmark

Fatores de risco auto reportados associados aos acidentes rodoviários : um estudo sobre os condutores portugueses de veículos ligeiros

RESUMO - Objetivos: Anualmente morrem cerca de 1,3 milhões de pessoas, a nível mundial, devido aos acidentes de viação. Também mais de 20 milhões de pessoas sofrem ferimentos ligeiros ou graves devido aos acidentes de viação que resultam em incapacidade temporária ou permanente. Desta forma, consideram-se os acidentes de viação, um grave problema de saúde pública, com custos elevados para as sociedades afetando a saúde das populações e economias de cada país. Este estudo pretendeu descrever e caracterizar os condutores de veículos ligeiros, residentes em Portugal Continental, abrangendo características sociodemográficas, experiência de condução e questões relativas a atitudes, opiniões e comportamentos. Por outro lado procurou-se analisar a associação entre as opiniões, atitudes e comportamentos, auto reportados e a ocorrência de um acidente de viação nos últimos três anos a fim de construir um modelo final preditivo do risco de sofrer um acidente de viação. Método: Foi realizado um estudo observacional analítico transversal baseado num questionário traduzido para a língua portuguesa e com origem no projeto europeu SARTRE 4. A população-alvo foram todos os condutores de veículos ligeiros possuidores de uma licença de condução e residentes em Portugal Continental, baseado numa amostra de igual dimensão à definida no estudo europeu SARTRE 4 (600 condutores de veículos ligeiros). Das 52 perguntas existentes, selecionaram-se pela análise de componentes principais (ACP) variáveis potencialmente independentes e complementares para as componentes opiniões, atitudes e comportamentos. Para além das medidas descritivas usuais, recorreu-se à regressão logística binária para analisar associações e obter um modelo que permitisse estimar a probabilidade de sofrer um acidente rodoviário em função das variáveis selecionadas referentes às opiniões, atitudes e comportamentos auto reportados. Resultados: Dos 612 condutores inquiridos, 62,7% (383) responderam não ter sofrido nenhum acidente de viação nos últimos três anos enquanto 37,3% (228) respondeu ter estado envolvido em pelo menos um acidente de viação com danos materiais ou feridos, no mesmo período. De uma forma geral, o típico condutor que referiu ter sofrido um acidente nos últimos três anos é homem com mais de 65 anos de idade, com o 1º ensino básico, viúvo e sem filhos, não empregado e reside numa área urbana. Os condutores residentes numa área suburbana apresentaram um risco 5,368 mais elevado de sofrer um acidente de viação em relação aos condutores que habitam numa zona rural (IC 95%: 2,344-12,297; p<0,001). Os condutores que foram apenas submetidos uma vez a um controlo de álcool, nos últimos três anos, durante o exercício da condução apresentaram um risco 3,009 superior de sofrer um acidente de viação em relação aos condutores que nunca foram fiscalizados pela polícia (IC 95%: 1,949-4,647, p<0,001). Os condutores que referiram muito frequentemente parar para dormir quando se sentem cansados a conduzir têm uma probabilidade inferior de 81% de sofrer um acidente de viação em relação aos condutores que nunca o fazem (IC 95%: 0,058-0,620; p=0,006). Os condutores que quando cansados raramente bebem um café/bebida energética têm um risco de 4,829 superior de sofrer um acidente de viação do que os condutores que sempre o referiram fazer (IC 95%:1,807-12,903; p=0,002). Conclusões: Os resultados obtidos em relação aos fatores comportamentais vão ao encontro da maioria dos fatores de risco associados aos acidentes de viação referidos na literatura. Ainda assim, foram identificadas novas associações entre o risco de sofrer um acidente e as opiniões e as atitudes auto reportadas que através de estudos de maiores dimensões populacionais poderão vir a ser mais exploradas. Este trabalho vem reforçar a necessidade urgente de novas estratégias de intervenção, principalmente na componente comportamental, direcionadas aos grupos de risco, mantendo as existentes.

Production of polyhydroxyalkanoates from oil-containing substrates

Different oil-containing substrates, namely, used cooking oil (UCO), fatty acids-byproduct from biodiesel production (FAB) and olive oil deodorizer distillate (OODD) were tested as inexpensive carbon sources for the production of polyhydroxyalkanoates (PHA) using twelve bacterial strains, in batch experiments. The OODD and FAB were exploited for the first time as alternative substrates for PHA production. Among the tested bacterial strains, Cupriavidus necator and Pseudomonas resinovorans exhibited the most promising results, producing poly-3-hydroxybutyrate, P(3HB), form UCO and OODD and mcl-PHA mainly composed of 3-hydroxyoctanoate (3HO) and 3-hydroxydecanoate (3HD) monomers from OODD, respectively. Afterwards, these bacterial strains were cultivated in bioreactor. C. necator were cultivated in bioreactor using UCO as carbon source. Different feeding strategies were tested for the bioreactor cultivation of C. necator, namely, batch, exponential feeding and DO-stat mode. The highest overall PHA productivity (12.6±0.78 g L-1 day-1) was obtained using DO-stat mode. Apparently, the different feeding regimes had no impact on polymer thermal properties. However, differences in polymer‟s molecular mass distribution were observed. C. necator was also tested in batch and fed-batch modes using a different type of oil-containing substrate, extracted from spent coffee grounds (SCG) by super critical carbon dioxide (sc-CO2). Under fed-batch mode (DO-stat), the overall PHA productivity were 4.7 g L-1 day-1 with a storage yield of 0.77 g g-1. Results showed that SCG can be a bioresource for production of PHA with interesting properties. Furthermore, P. resinovorans was cultivated using OODD as substrate in bioreactor under fed-batch mode (pulse feeding regime). The polymer was highly amorphous, as shown by its low crystallinity of 6±0.2%, with low melting and glass transition temperatures of 36±1.2 and -16±0.8 ºC, respectively. Due to its sticky behavior at room temperature, adhesiveness and mechanical properties were also studied. Its shear bond strength for wood (67±9.4 kPa) and glass (65±7.3 kPa) suggests it may be used for the development of biobased glues. Bioreactor operation and monitoring with oil-containing substrates is very challenging, since this substrate is water immiscible. Thus, near-infrared spectroscopy (NIR) was implemented for online monitoring of the C. necator cultivation with UCO, using a transflectance probe. Partial least squares (PLS) regression was applied to relate NIR spectra with biomass, UCO and PHA concentrations in the broth. The NIR predictions were compared with values obtained by offline reference methods. Prediction errors to these parameters were 1.18 g L-1, 2.37 g L-1 and 1.58 g L-1 for biomass, UCO and PHA, respectively, which indicates the suitability of the NIR spectroscopy method for online monitoring and as a method to assist bioreactor control. UCO and OODD are low cost substrates with potential to be used in PHA batch and fed-batch production. The use of NIR in this bioprocess also opened an opportunity for optimization and control of PHA production process.

Behavioural, mensural, and ecological correlates of polygyny in the eastern meadowlark (Sturnella magna)

During 1982 and 1983 I studied male attributes and attributes of the territory of male Eastern Meadowlarks (Sturnella magna) in order to determine whether there was a correlation between any of the attributes investigated and the number of females attracted by a male. Seventeen males, nine of which were polygynous and eight monogamous, were studied in 1982 and sixteen males.of which .. seven were polygynous and nine ~onogamous, were studied in 1983. The study was conducted in Short Hills Park, 10 km southwest of St. Catharines, Ontario and was designed to compare two hypotheses: the "sexy son" hypothesis (Weatherhead and Robertson,1977) and the polygyny threshold model (Verner and Willson,1966, Orians, 1969). Male attributes investigated were male size and song behaviour. Six measures of male size were taken: weight, flattened and natural wing chord length, culmen length, bill depth and length of the tarsometatarsus. In 1983 song repertoire size and song versatility measures were investigated. Attributes of the territory studied were: territory size, density of plant stems, percentage plant cover and measures of vegetation structure. In 1983 Arthropods were collected from each territory and sorted according to taxonomic group and size. During 1983, territory attributes were sampled twice, once early and once later in the nesting season. Analysis of data involved univariate comparisons between monogamous and polygynous males using T-tests and multivariate comparisons were made using discriminant function analysis (DFA) and principle components analysis (PCA).No correlations were found between the number of females attracted with, .ny measure of male size or with me, .sures of song versatili or size of song repertoire. Also no correlation was found between terri size and the number of females nesting on a terri . Some attributes of the male's terri id distinguish between monog,mous and po s males of thistudy. Analysis of Arthropod numbers showed that e~ .eran counts were significantly great~r on polygynous territories, a1 the total numb~rs of Arthropods collected showed no s fico .nt differences between territories of monogamous and po males. DFA chose ear teran and Hymenopteran counts as multivariate discriminators; both variables we' e more vegetation revealed that there were no univariate differences between the two groups of males fOT 1982 stem densities, but ~ spp. and Solidago spp. were chosen DFA as multivariate discriminators. The total number of plant stems and of Vicia spp. stems were s ficantly the early 1983 ing on monogamous territories for however DFA found no multivariate discriminators" Variables concerned with the overall aspects of vegetation structure showed significant differences between territories of monogamous and polygynous males. DFA of the 1982 sampling of vegetation structure showed significantly greater mat depth and vegetation height on polygynous territories, a finding which was not supported, however, by peA. For the early 1983 sampling period, plant height was greater on polygynous territories. Multivariate analysis identified greater green cover on polygynous territories, greater ground cover on monogamous territories, and greater depth of mat material on monogamous territories as discriminators between territories of monogamous and polygynous males. A DFA on the major variables of the study showed no significant difference between the territories of monogamous and polygynous male Meadowlarks. Of the correlations found, some were for non-prey Arthr~ods, for cover plants with very small samples sizes, or for variables which were greater for monogamous males during one sampling period and polygynous males during the next. While multivariate discriminators were found, peA showed no grouping of monogamous or polygynous males according to any of the variables investigated. On the basis of the univariate and multivariate analysis of major variables, I concluded that there were no correlations between the number of females attracted with male attributes and no unambiguous correlation with attributes of the territory. My study does not unequivocally support either the "sexy son" or the polygyny threshold hypothesis.

Delineation of within-site terroir effects using soil and vine water measurement. Investigation of Cabernet Franc

. The influence of vine water status was studied in commercial vineyard blocks of Vilis vinifera L. cv. Cabernet Franc in Niagara Peninsula, Ontario from 2005 to 2007. Vine performance, fruit composition and vine size of non-irrigated grapevines were compared within ten vineyard blocks containing different soil and vine water status. Results showed that within each vineyard block water status zones could be identified on GIS-generated maps using leaf water potential and soil moisture measurements. Some yield and fruit composition variables correlated with the intensity of vine water status. Chemical and descriptive sensory analysis was performed on nine (2005) and eight (2006) pairs of experimental wines to illustrate differences between wines made from high and low water status winegrapes at each vineyard block. Twelve trained judges evaluated six aroma and flavor (red fruit, black cherry, black current, black pepper, bell pepper, and green bean), thr~e mouthfeel (astringency, bitterness and acidity) sensory attributes as well as color intensity. Each pair of high and low water status wine was compared using t-test. In 2005, low water status (L WS) wines from Buis, Harbour Estate, Henry of Pelham (HOP), and Vieni had higher color intensity; those form Chateau des Charmes (CDC) had high black cherry flavor; those at RiefEstates were high in red fruit flavor and at those from George site was high in red fruit aroma. In 2006, low water status (L WS) wines from George, Cave Spring and Morrison sites were high in color intensity. L WS wines from CDC, George and Morrison were more intense in black cherry aroma; LWS wines from Hernder site were high in red fruit aroma and flavor. No significant differences were found from one year to the next between the wines produced from the same vineyard, indicating that the attributes of these wines were maintained almost constant despite markedly different conditions in 2005 and 2006 vintages. Partial ii Least Square (PLS) analysis showed that leaf \}' was associated with red fruit aroma and flavor, berry and wine color intensity, total phenols, Brix and anthocyanins while soil moisture was explained with acidity, green bean aroma and flavor as well as bell pepper aroma and flavor. In another study chemical and descriptive sensory analysis was conducted on nine (2005) and eight (2006) medium water status (MWS) experimental wines to illustrate differences that might support the sub-appellation system in Niagara. The judges evaluated the same aroma, flavor, and mouthfeel sensory attributes as well as color intensity. Data were analyzed using analysis of variance (ANOVA), principal component analysis (PCA) and discriminate analysis (DA). ANOV A of sensory data showed regional differences for all sensory attributes. In 2005, wines from CDC, HOP, and Hemder sites showed highest. r ed fruit aroma and flavor. Lakeshore and Niagara River sites (Harbour, Reif, George, and Buis) wines showed higher bell pepper and green bean aroma and flavor due to proximity to the large bodies of water and less heat unit accumulation. In 2006, all sensory attributes except black pepper aroma were different. PCA revealed that wines from HOP and CDC sites were higher in red fruit, black currant and black cherry aroma and flavor as well as black pepper flavor, while wines from Hemder, Morrison and George sites were high in green bean aroma and flavor. ANOV A of chemical data in 2005 indicated that hue, color intensity, and titratable acidity (TA) were different across the sites, while in 2006, hue, color intensity and ethanol were different across the sites. These data indicate that there is the likelihood of substantial chemical and sensory differences between clusters of sub-appellations within the Niagara Peninsula iii

Sir Isaac Brock Facial Reconstruction Project, n.d.

Christian Cardell Corbet, a descendant of Guernsey, Channel Islands, was born in 1966 at Pickering Beach on Lake Ontario. He developed his talents as a landscape artist and at the young age of 14 he began his informal education in commercial signage from his paternal grandfather. He studied at the University of Guelph and McMaster University Anatomy Laboratory. Corbet traveled to England where he began to experiment more in abstraction and non-objective work. In 1995, he presented a portrait of HM Queen Elizabeth the Queen Mother at Clarence House. This brought his career to an international level. He also creates two-dimensional works and has received acclaim for his bronze art medallions. He has gained international recognition as a Forensic Artist working as Artist in Residence for the University of Western Ontario. He does facial reconstructions for special assignments. These original drawings relate to a sculpted medallion of Brock which was authorized by Sir Geoffrey Rowland, Bailiff, Guernsey, Channel Islands and Minister of Education of the States of Guernsey. This is the first time in known recorded history that a forensic analysis and sculpture has been created to accurately depict the facial likeness of Sir Isaac Brock. This project has been established to mark the 2012 anniversary of the death of Brock.

Larval habitat associations with human land uses, roads, rivers, and land cover for Anopheles albimanus, A. pseudopunctipennis, and A. punctimacula (Diptera: Culicidae) in coastal and highland Ecuador

Larval habitat for three highland Anopheles species: Anopheles albimanus Wiedemann, Anopheles pseudopunctipennis Theobald, and Anopheles punctimacula Dyar and Knab was related to human land uses, rivers, roads, and remotely sensed land cover classifications in the western Ecuadorian Andes. Of the five commonly observed human land uses, cattle pasture (n = 30) provided potentially suitable habitat for A. punctimacula and A. albimanus in less than 14% of sites, and was related in a principal components analysis (PCA) to the presence of macrophyte vegetation, greater surface area, clarity, and algae cover. Empty lots (n = 30) were related in the PCA to incident sunlight and provided potential habitat for A. pseudopunctipennis and A. albimanus in less than 14% of sites. The other land uses surveyed (banana, sugarcane, and mixed tree plantations; n = 28, 21, 25, respectively) provided very little standing water that could potentially be used for larval habitat. River edges and eddies (n = 41) were associated with greater clarity, depth, temperature, and algae cover, which provide potentially suitable habitat for A. albimanus in 58% of sites and A. pseudopunctipennis in 29% of sites. Road-associated water bodies (n = 38) provided potential habitat for A. punctimacula in 44% of sites and A. albimanus in 26% of sites surveyed. Species collection localities were compared to land cover classifications using Geographic Information Systems software. All three mosquito species were associated more often with the category “closed/open broadleaved evergreen and/or semi-deciduous forests” than expected (P ≤ 0.01 in all cases), given such a habitat’s abundance. This study provides evidence that specific human land uses create habitat for potential malaria vectors in highland regions of the Andes.

Hyperspectral Mineral Identification using SVM and SOM

Remote sensing techniques involving hyperspectral imagery have applications in a number of sciences that study some aspects of the surface of the planet. The analysis of hyperspectral images is complex because of the large amount of information involved and the noise within that data. Investigating images with regard to identify minerals, rocks, vegetation and other materials is an application of hyperspectral remote sensing in the earth sciences. This thesis evaluates the performance of two classification and clustering techniques on hyperspectral images for mineral identification. Support Vector Machines (SVM) and Self-Organizing Maps (SOM) are applied as classification and clustering techniques, respectively. Principal Component Analysis (PCA) is used to prepare the data to be analyzed. The purpose of using PCA is to reduce the amount of data that needs to be processed by identifying the most important components within the data. A well-studied dataset from Cuprite, Nevada and a dataset of more complex data from Baffin Island were used to assess the performance of these techniques. The main goal of this research study is to evaluate the advantage of training a classifier based on a small amount of data compared to an unsupervised method. Determining the effect of feature extraction on the accuracy of the clustering and classification method is another goal of this research. This thesis concludes that using PCA increases the learning accuracy, and especially so in classification. SVM classifies Cuprite data with a high precision and the SOM challenges SVM on datasets with high level of noise (like Baffin Island).

Towards the identification of a neighbourhood park typology : a conceptual and methodological exploration

Peu d’études ont évalué les caractéristiques des parcs pouvant encourager l’activité physique spécifiquement chez les jeunes. Cette étude vise à estimer la fiabilité d’un outil d’observation des parcs orienté vers les jeunes, à identifier les domaines conceptuels des parcs capturés par cet outil à l’aide d’une opérationnalisation du modèle conceptuel des parcs et de l’activité physique et à identifier différents types de parcs. Un total de 576 parcs ont été évalués en utilisant un outil d’évaluation des parcs. La fiabilité intra-juges et la fiabilité inter-juges de cet outil ont été estimées. Une analyse exploratoire par composantes principales (ACP) a été effectuée en utilisant une rotation orthogonale varimax et les variables étaient retenues si elles saturaient à ≥0.3 sur une composante. Une analyse par grappes (AG) à l’aide de la méthode de Ward a ensuite été réalisée en utilisant les composantes principales et une mesure de l’aire des parcs. L’outil était généralement fiable et l’ACP a permis d'identifier dix composantes principales qui expliquaient 60% de la variance totale. L’AG a donné un résultat de neuf grappes qui expliquaient 40% de la variance totale. Les méthodes de l’ACP et l’AG sont donc faisables avec des données de parcs. Les résultats ont été interprétés en utilisant l’opérationnalisation du modèle conceptuel.

La transformation des enquêtes policières due à l’influence des technologies : perspective d’une unité policière spécialisée en analyse judiciaire informatique

La popularité des technologies de l’information et des communications entraîne l’augmentation de la preuve retrouvée sous forme numérique lors d’enquêtes policières. Les organisations policières doivent innover afin d’analyser, gérer et tirer profit de cette preuve numérique. En réponse, elles ont constitué des unités spécialisées en criminalité technologique et en analyse judiciaire informatique. La présente étude utilise les théories de l’innovation afin de déterminer comment l’évolution des technologies et des tendances en matière de criminalité technologique influencent les enquêtes et les organisations policières. Cette recherche vise à augmenter les connaissances sur ces unités spécialisées en quantifiant et en qualifiant leur travail quotidien. Avec la collaboration d’une unité policière canadienne spécialisée en analyse judiciaire informatique, une analyse détaillée des demandes d’expertise adressées à leur service a été effectuée. Les résultats indiquent une augmentation de la preuve numérique avec la prévalence de certaines formes de criminalité et de certains appareils électroniques. Les facteurs influençant le délai de traitement sont soulignés ainsi que les stratégies mises de l’avant afin de gérer efficacement l’accroissement des demandes de service. Finalement, des entrevues ont été menées avec certains membres de l’équipe afin de mettre en lumière les défis et les enjeux relatifs à l’implantation et au fonctionnement d’une telle unité. Les principaux enjeux soulevés concernent les environnements technologiques et juridiques, la formation du personnel, la gestion des ressources et les priorités organisationnelles.