Characterization and Identification of Proteolytic Bacteria From the Gut of the Velvetbean Caterpillar (Lepidoptera: Noctuidae)

The characterization and identification of proteolytic bacteria from the gut of the velvetbean caterpillar (Anticarsia gemmatalis) were the objectives of this study. Twelve aerobic and anaerobic isolates of proteolytic bacteria were obtained from the caterpillar gut in calcium caseinate agar. The number of colony forming units (CFUs) of proteolytic bacteria was higher when the bacteria were extracted from caterpillars reared on artificial diet rather than on soybean leaves (1.73 +/- 0.35 X 10(3) and 0.55 +/- 0.22 X 10(3) CFU/mg gut, respectively). The isolated bacteria were divided into five distinct groups, according to their polymerase chain reaction restriction fragment-length polymorphism profiles. After molecular analysis, biochemical tests and fatty acid profile determination, the bacteria were identified as Bacillus subtilis, Bacillus cereus, Enterococcus gallinarum, Enterococcus mundtii, and Staphylococcus xylosus. Bacterial proteolytic activity was assessed through in vitro colorimetric assays for (general) proteases, serine proteases, and cysteine proteases. The isolated bacteria were able of hydrolyzing all tested substrates, except Staphylococcus xylosus, which did not exhibit serine protease activity. This study provides support for the hypothesis that gut proteases from velvetbean caterpillar are not exclusively secreted by the insect cells but also by their symbiotic gut bacteria. The proteolytic activity from gut symbionts of the velvetbean caterpillar is suggestive of their potential role minimizing the potentially harmful consequences of protease inhibitors from some of this insect host plants, such as soybean, with implications for the management of this insect pest species.

A New Indirect Electroanalytical Method to Monitor the Contamination of Natural Waters with 4-Nitrophenol Using Multiwall Carbon Nanotubes

The electrochemical detection of the hazardous pollutant 4-nitrophenol (4-NP) at low potentials, in order to avoid matrix interferences, is an important research challenge. This study describes the development, electrochemical characterization and utilization of a multiwall carbon nanotube (MWCNT) film electrode for the quantitative determination of 4-NP in natural water. Electrochemical impedence spectroscopy measurements showed that the modified surface exhibits a decrease of ca. 13 times in the charge transfer resistance when compared with a bare glassy carbon (GC) surface. Voltammetric experiments showed the possibility to oxidize a hydroxylamine layer (produced by the electrochemical reduction of 4-NP on the GC/MWNCT surface) in a potential region which is approximately 700 mV less positive than that needed to oxidize 4-NP, thus minimizing the interference of matrix components. The limit of detection for 4-NP obtained using square-wave voltammetry (0.12 mu mol L(-1)) was lower than the value advised by EPA. A natural water sample from a dam located in Sao Carlos (Brazil) was spiked with 4-NP and analyzed by the standard addition method using thee GC/MWCNT electrode, without any further purification step. the recovery procedure yielded a value of 96.5% for such sample, thus confirming the suitability of the developed method to determine 4-NP in natural water samples. The electrochemical determination was compared with that obtained by HPLC with UV-vis detection.

Using ant colonies for solve the multiprocessor task graph scheduling

The problem of scheduling a parallel program presented by a weighted directed acyclic graph (DAG) to the set of homogeneous processors for minimizing the completion time of the program has been extensively studied as academic optimization problem which occurs in optimizing the execution time of parallel algorithm with parallel computer.In this paper, we propose an application of the Ant Colony Optimization (ACO) to a multiprocessor scheduling problem (MPSP). In the MPSP, no preemption is allowed and each operation demands a setup time on the machines. The problem seeks to compose a schedule that minimizes the total completion time.We therefore rely on heuristics to find solutions since solution methods are not feasible for most problems as such. This novel heuristic searching approach to the multiprocessor based on the ACO algorithm a collection of agents cooperate to effectively explore the search space.A computational experiment is conducted on a suit of benchmark application. By comparing our algorithm result obtained to that of previous heuristic algorithm, it is evince that the ACO algorithm exhibits competitive performance with small error ratio.

Biolinguistics or Physicolinguistics? Is The Third Factor Helpful Or Harmful In Explaining Language?

Noam Chomsky (2005) proposed that a ‘third factor’, consisting of general principles and natural laws, may explain core properties of language in a principled manner, minimizing the need for either genetic endowment or experience. But the focus on third-factor patterns in much recent bio-linguistic work is misguided for several reasons: First, ‘the’ third factor is a vague and disparate collection of unrelated components, useless as an analytical tool. Second, the vagueness of the third factor, together with the desire for principled explanations, too often leads to sweeping claims, such as syntax “coming for free, directly from physics”, that are unwarranted without a case-by-case causal analysis. Third, attention is diverted away from a proper causal analysis of language as a biological feature. The point with biolinguistics is to acknowledge the language faculty as a biological feature. The best way forward towards an understanding of language is to take the biology connection seriously, instead of dabbling with physics.

Electrical Evaluation of a Low Concentrating PVT Collector Based on Performance Ratio

Photovoltaic Thermal/Hybrid collectors are an emerging technology that combines PV and solar thermal collectors by producing heat and electricity simultaneously. In this paper, the electrical performance evaluation of a low concentrating PVT collector was done through two testing parts: power comparison and performance ratio testing. For the performance ratio testing, it is required to identify and measure the factors affecting the performance ratio on a low concentrating PVT collector. Factors such as PV cell configuration, collector acceptance angle, flow rate, tracking the sun, temperature dependence and diffuse to irradiance ratio. Solarus low concentrating PVT collector V12 was tested at Dalarna University in Sweden using the electrical equipment at the solar laboratory. The PV testing has showed differences between the two receivers. Back2 was producing 1.8 energy output more than Back1 throughout the day. Front1 and Front2 were almost the same output performance. Performance tests showed that the cell configuration for Receiver2 with cells grouping (6- 32-32-6) has proved to have a better performance ratio when to it comes to minimizing the shading effect leading to more output power throughout the day because of lowering the mismatch losses. Different factors were measured and presented in this thesis in chapter 5. With the current design, it has been obtained a peak power at STC of 107W per receiver. The solar cells have an electrical efficiency of approximately 19% while the maximum measured electrical efficiency for the collector was approximately 18 % per active cell area, in addition to a temperature coefficient of -0.53%/ ˚C. Finally a recommendation was done to help Solarus AB to know how much the electrical performance is affected during variable ambient condition and be able to use the results for analyzing and introducing new modification if needed.

Essays on firm dynamics in the Swedish wholesale trade sector

This thesis consists of a summary and five self-contained papers addressing dynamics of firms in the Swedish wholesale trade sector. Paper [1] focuses upon determinants of new firm formation in the Swedish wholesale trade sector, using two definitions of firms’ relevant markets, markets defined as administrative areas, and markets based on a cost minimizing behavior of retailers. The paper shows that new entering firms tend to avoid regions with already high concentration of other firms in the same branch of wholesaling, while right-of-the-center local government and quality of the infrastructure have positive impacts upon entry of new firms. The signs of the estimated coefficients remain the same regardless which definition of relevant market is used, while the size of the coefficients is generally higher once relevant markets delineated on the cost-minimizing assumption of retailers are used. Paper [2] analyses determinant of firm relocation, distinguishing between the role of the factors in in-migration municipalities and out-migration municipalities. The results of the analysis indicate that firm-specific factors, such as profits, age and size of the firm are negatively related to the firm’s decision to relocate. Furthermore, firms seems to be avoiding municipalities with already high concentration of firms operating in the same industrial branch of wholesaling and also to be more reluctant to leave municipalities governed by right-of-the- center parties. Lastly, firms seem to avoid moving to municipalities characterized with high population density. Paper [3] addresses determinants of firm growth, adopting OLS and a quantile regression technique. The results of this paper indicate that very little of the firm growth can be explained by the firm-, industry- and region-specific factors, controlled for in the estimated models. Instead, the firm growth seems to be driven by internal characteristics of firms, factors difficult to capture in conventional statistics. This result supports Penrose’s (1959) suggestion that internal resources such as firm culture, brand loyalty, entrepreneurial skills, and so on, are important determinants of firm growth rates. Paper [4] formulates a forecasting model for firm entry into local markets and tests this model using data from the Swedish wholesale industry. The empirical analysis is based on directly estimating the profit function of wholesale firms and identification of low- and high-return local markets. The results indicate that 19 of 30 estimated models have more net entry in high-return municipalities, but the estimated parameters is only statistically significant at conventional level in one of our estimated models, and then with unexpected negative sign. Paper [5] studies effects of firm relocation on firm profits of relocating firms, employing a difference-in-difference propensity score matching. Using propensity score matching, the pre-relocalization differences between relocating and non-relocating firms are balanced, while the difference-in-difference estimator controls for all time-invariant unobserved heterogeneity among firms. The results suggest that firms that relocate increase their profits significantly, in comparison to what the profits would be had the firms not relocated. This effect is estimated to vary between 3 to 11 percentage points, depending on the length of the analyzed period. 

How do different densities in a network affect the optimal location of service centers?

The p-median problem is often used to locate p service centers by minimizing their distances to a geographically distributed demand (n). The optimal locations are sensitive to geographical context such as road network and demand points especially when they are asymmetrically distributed in the plane. Most studies focus on evaluating performances of the p-median model when p and n vary. To our knowledge this is not a very well-studied problem when the road network is alternated especially when it is applied in a real world context. The aim in this study is to analyze how the optimal location solutions vary, using the p-median model, when the density in the road network is alternated. The investigation is conducted by the means of a case study in a region in Sweden with an asymmetrically distributed population (15,000 weighted demand points), Dalecarlia. To locate 5 to 50 service centers we use the national transport administrations official road network (NVDB). The road network consists of 1.5 million nodes. To find the optimal location we start with 500 candidate nodes in the network and increase the number of candidate nodes in steps up to 67,000. To find the optimal solution we use a simulated annealing algorithm with adaptive tuning of the temperature. The results show that there is a limited improvement in the optimal solutions when nodes in the road network increase and p is low. When p is high the improvements are larger. The results also show that choice of the best network depends on p. The larger p the larger density of the network is needed. 

Automatic spiral analysis for objective assessment of motor symptoms in Parkinson's disease

Objective: To develop a method for objective quantification of PD motor symptoms related to Off episodes and peak dose dyskinesias, using spiral data gathered by using a touch screen telemetry device. The aim was to objectively characterize predominant motor phenotypes (bradykinesia and dyskinesia), to help in automating the process of visual interpretation of movement anomalies in spirals as rated by movement disorder specialists. Background: A retrospective analysis was conducted on recordings from 65 patients with advanced idiopathic PD from nine different clinics in Sweden, recruited from January 2006 until August 2010. In addition to the patient group, 10 healthy elderly subjects were recruited. Upper limb movement data were collected using a touch screen telemetry device from home environments of the subjects. Measurements with the device were performed four times per day during week-long test periods. On each test occasion, the subjects were asked to trace pre-drawn Archimedean spirals, using the dominant hand. The pre-drawn spiral was shown on the screen of the device. The spiral test was repeated three times per test occasion and they were instructed to complete it within 10 seconds. The device had a sampling rate of 10Hz and measured both position and time-stamps (in milliseconds) of the pen tip. Methods: Four independent raters (FB, DH, AJ and DN) used a web interface that animated the spiral drawings and allowed them to observe different kinematic features during the drawing process and to rate task performance. Initially, a number of kinematic features were assessed including ‘impairment’, ‘speed’, ‘irregularity’ and ‘hesitation’ followed by marking the predominant motor phenotype on a 3-category scale: tremor, bradykinesia and/or choreatic dyskinesia. There were only 2 test occasions for which all the four raters either classified them as tremor or could not identify the motor phenotype. Therefore, the two main motor phenotype categories were bradykinesia and dyskinesia. ‘Impairment’ was rated on a scale from 0 (no impairment) to 10 (extremely severe) whereas ‘speed’, ‘irregularity’ and ‘hesitation’ were rated on a scale from 0 (normal) to 4 (extremely severe). The proposed data-driven method consisted of the following steps. Initially, 28 spatiotemporal features were extracted from the time series signals before being presented to a Multilayer Perceptron (MLP) classifier. The features were based on different kinematic quantities of spirals including radius, angle, speed and velocity with the aim of measuring the severity of involuntary symptoms and discriminate between PD-specific (bradykinesia) and/or treatment-induced symptoms (dyskinesia). A Principal Component Analysis was applied on the features to reduce their dimensions where 4 relevant principal components (PCs) were retained and used as inputs to the MLP classifier. Finally, the MLP classifier mapped these components to the corresponding visually assessed motor phenotype scores for automating the process of scoring the bradykinesia and dyskinesia in PD patients whilst they draw spirals using the touch screen device. For motor phenotype (bradykinesia vs. dyskinesia) classification, the stratified 10-fold cross validation technique was employed. Results: There were good agreements between the four raters when rating the individual kinematic features with intra-class correlation coefficient (ICC) of 0.88 for ‘impairment’, 0.74 for ‘speed’, 0.70 for ‘irregularity’, and moderate agreements when rating ‘hesitation’ with an ICC of 0.49. When assessing the two main motor phenotype categories (bradykinesia or dyskinesia) in animated spirals the agreements between the four raters ranged from fair to moderate. There were good correlations between mean ratings of the four raters on individual kinematic features and computed scores. The MLP classifier classified the motor phenotype that is bradykinesia or dyskinesia with an accuracy of 85% in relation to visual classifications of the four movement disorder specialists. The test-retest reliability of the four PCs across the three spiral test trials was good with Cronbach’s Alpha coefficients of 0.80, 0.82, 0.54 and 0.49, respectively. These results indicate that the computed scores are stable and consistent over time. Significant differences were found between the two groups (patients and healthy elderly subjects) in all the PCs, except for the PC3. Conclusions: The proposed method automatically assessed the severity of unwanted symptoms and could reasonably well discriminate between PD-specific and/or treatment-induced motor symptoms, in relation to visual assessments of movement disorder specialists. The objective assessments could provide a time-effect summary score that could be useful for improving decision-making during symptom evaluation of individualized treatment when the goal is to maximize functional On time for patients while minimizing their Off episodes and troublesome dyskinesias.

Does road network density matter in optimally locating facilities?

Optimal location on the transport infrastructure is the preferable requirement for many decision making processes. Most studies have focused on evaluating performances of optimally locate p facilities by minimizing their distances to a geographically distributed demand (n) when p and n vary. The optimal locations are also sensitive to geographical context such as road network, especially when they are asymmetrically distributed in the plane. The influence of alternating road network density is however not a very well-studied problem especially when it is applied in a real world context. This paper aims to investigate how the density level of the road network affects finding optimal location by solving the specific case of p-median location problem. A denser network is found needed when a higher number of facilities are to locate. The best solution will not always be obtained in the most detailed network but in a middle density level. The solutions do not further improve or improve insignificantly as the density exceeds 12,000 nodes, some solutions even deteriorate. The hierarchy of the different densities of network can be used according to location and transportation purposes and increase the efficiency of heuristic methods. The method in this study can be applied to other location-allocation problem in transportation analysis where the road network density can be differentiated. 

Familjemedlem till person med psykossjukdom : bemötande och utanförskap i psykiatrisk vård

This thesis focused on the situation of family members of persons with psychotic illness, particular on their experience of the approach of the healthcare professionals and of their feelings of alienation regarding the professional care of their family member. A further aim was to explore how siblings who have participated in a support group for siblings experienced their situation. A questionnaire was developed that enabled the aims of this thesis to be investigated (I). Seventy family members from various parts of Sweden participated, and data were collected via the questionnaire developed in study I (II-III). Thirteen siblings who previously had participated in a support group participated in follow-up focus groups interviews (IV). The questionnaire developed was shown to be reliable and valid in these studies (I). In many cases, the participants had experienced an approach from professionals that indicated that they did not experience openness, confirmation and cooperation, and that they felt powerless and socially isolated in relation to the care. There was also found to be a certain degree of association between how the participants experienced the approach and whether they felt alienation (II). The majority of the participants considered openness, confirmation, and cooperation to be important aspects of professional’s approach. The result also identified a low level of agreement between the participants’ experience and what they considered to be significant in the professional’s approach (III). The findings revealed the complexity of being a sibling of an individual with psychotic illness. Participating in a support group for siblings can be of importance in gaining knowledge and minimizing feelings of being alone (IV). Although the psychiatric care services in Sweden have been aware of the importance of cooperating with family members, the results indicated that there is a need for further research in this area.

A produção mais limpa como geradora de inovação e competitividade : o caso da fazenda Cerro do Tigre

Entende-se que no modo de produção atual - tanto primária como industrial - existem pelo menos duas características comuns a ambos. Elas são o desperdício de matérias-primas e de energia. O desejo de minimizar ou eliminar as causas e os efeitos desta situação são os principais objetivos da Produção Mais Limpa (PML). Com a adoção da Produção Mais Limpa ainda podem ocorrer impactos ao meio ambiente. Contudo, estes impactos começam a ser revistos, de forma a serem minimizados ou eliminados. O tema desta pesquisa refere-se à Produção Mais Limpa como geradora de inovação e competitividade, sob a ótica da gestão da tecnologia e tendo em vista as questões ambientais. O problema de pesquisa foi dado pelo seguinte questionamento: Como a adoção da Produção Mais Limpa (PML) pode gerar inovação e competitividade para a empresa que a adota? O objetivo geral da pesquisa foi identificar como a adoção da Produção Mais Limpa (PML) pode gerar inovação e competitividade para a empresa que a adota. Os objetivos específicos buscaram (1) identificar por que a Produção Mais Limpa está sendo adotada; (2) descrever como a Produção Mais Limpa está sendo implementada; (3) identificar os resultados, tangíveis e intangíveis, obtidos com a implementação da Produção Mais Limpa. A parte teórica do estudo permitiu identificar e entender a relação existente entre a adoção da Produção Mais Limpa (PML) e a geração da inovação e da competitividade. Estudou-se, também, a Metodologia Ecoprofit, da UNIDO/UNEP, sendo que parte desta metodologia foi utilizada na pesquisa. Tendo em vista que a empresa pesquisada - Fazenda Cerro do Tigre (FCT) - pertence ao setor do agribusiness, também buscou-se compreender a cadeia produtiva do arroz. Como método de pesquisa, optou-se pelo estudo de caso. O resultado deste estudo indica que a adoção da Produção Mais Limpa (PML) está gerando inovação e competitividade para a empresa. Isto está ocorrendo porque a Fazenda Cerro do Tigre (FCT) consegue realizar a ligação entre as variáveis “Produção Mais Limpa” e “Competitividade” através da variável “Inovação”. A adoção da Produção Mais Limpa (PML) requer, por parte da empresa, a constante realização de melhorias contínuas. Estas melhorias facilitam a geração das inovações. As inovações, por sua vez, facilitam o alcance da competitividade.

Extrativismo em área de reserva da biosfera da Mata Atlântica no Rio Grande do Sul : um estudo etnobiológico em Maquiné

As frondes de Rumohra adiantiformis (G.Forest.) Ching, conhecida como “leatherleaf”, “seven-weeks-fern” ou samambaia-preta, são usadas mundialmente em arranjos florais. Na África do Sul e Brasil o comércio da espécie é baseado no extrativismo. No Brasil a coleta é realizada em áreas de Mata Atlântica, sendo que 50% da produção provém das áreas de capoeira das encostas da Serra Geral no Rio Grande do Sul (RS). Atualmente, cerca de 2.000 famílias de agricultores familiares vivem nestas áreas, tendo no extrativismo sua principal fonte de renda. No entanto no RS a coleta, o comércio e o transporte de plantas ornamentais nativas são proibidos, já que nesta zona de transição da Reserva da Biosfera da Mata Atlântica (Maquiné, RS) há grandes restrições quanto à exploração dos recursos naturais. O êxodo rural e o próprio extrativismo estabelecido a partir da década de 70, permitiram a regeneração da Floresta Ombrófila Densa. Como a espécie é característica de estágios sucessionais iniciais, a regeneração florestal está levando à diminuição dos estoques naturais. Este trabalho se propôs a identificar alternativas econômicas para diversificação da economia de famílias de extrativistas, no intuito de minimizar a tensão associada à diminuição dos estoques naturais de samambaia-preta, às dificuldades no manejo da terra e à legislação ambiental. Junto à comunidade extrativista do distrito de Solidão (Maquiné) foram coletados dados etnobiológicos sobre plantas medicinais e plantas relacionadas ao artesanato. As principais espécies identificadas foram: Bambusa tuldoides (taquareira, colmo), Clytostoma sciuripabulum (cipó-branco, caule), Cyperus prolixus (tiririca, partes aéreas), Musa acuminata (bananeira, palha), Scirpus californicus (junco, partes aéreas), Typha dominguensis (taboa, partes aéreas), sendo que Macfadyena dentata (cipó-unha-de-gato, caule), Roupala brasiliensis (carvalho-brasileiro, folhas) e Tillandsia usneoides (barbade- pau, planta inteira) são as espécies prioritárias para a avaliação da sustentabilidade do extrativismo. Os dados etnobiológicos e ecológicos mostram que é possível estabelecer o manejo sustentável da R. adiantiformis. Os maiores entraves para o estabelecimento do manejo sustentado para as espécies identificadas incluem: a) estabelecer as bases de manejo sustentável destas espécies; b) compatibilizar esta atividade extrativista com o atual Código Florestal Estadual. Plantas medicinais não parecem ser uma alternativa viável a curto prazo, enquanto o artesanato requer a adequação da atividade artesanal no meio rural com os direitos à aposentadoria rural.

Análise da viabilidade do sistema de auditorias de obras públicas do Tribunal de Contas do Estado do Rio de Janeiro à luz do modelo de sistema viável

The Brazilian public administration must act with efficiency, developing its activities with readiness and minimizing the use of resources. However, it has not been being able to work with increasing demand in solve complex problems. Tribunal de Contas do Estado do Rio de Janeiro (TCERJ) is the entity responsible for the operational audit of the public institutions of Rio de Janeiro State and its Municipals districts, except for the Capital. It has detected itself that the society demand is superior to its operational capacity of assistance. This dissertation tries to know if the public works audits system adopted by TCERJ could be considered a viable system. Considering that the systems approaches represents the key to work with a reality more and more complex, the Viable System Modelo (VSM) was adopted as reference, having been developed by Stafford Beer with cybernetics basis. Finally, taking VSM as reference in the normative level, it could be affirmed that the studied system is not a viable system to verify that, the studied system is not a viable system yet.

REPETRO - Regime Aduaneiro Especial de Importação e Exportação de Bens Destinados à Pesquisa e Lavra de Petróleo e Gás: análise dos entraves e propostas de soluções

REPETRO, the special tax regime for importing and exporting goods for the exploration and drilling of oil and gas, aims at bringing foreign assets to Brazil enjoying a suspension or even an exemption of taxes, so that Brazilian industry may profit from about 8 billion American dollars in investments. The creation of normative devices as well as the management of the REPETRO model are under the exclusive responsibility of the Brazilian Internal Revenue Services. REPETRO was created in 1999 and is composed of the following customs treatments: importation of goods with suspension of taxes by use of the drawback special regime, suspension mode for national exporting industry; exportation with fictitious exit for the national industry; temporary admission of goods or assets used in oil exploration and production, attending to the needs of both the national and foreign market. Considering the inability of the Brazilian government in restructuring its foreign trade model so that a strong investment in technology could provide for the sector¿s needs, we must ask how we can change REPETRO to help the various companies in the oil business? The issue is very important for one of our main economic activities, though not enough studied. The energy sector has a strategic importance for the development and the economic independence of any country. The winds of globalization lead Brazil to open its economy in the last decade and the national policy for exploration and drilling (E&D) was altered. The government created a new agency dedicated to market control and energy policies, the National Agency for Oil and Biofuels (ANP). With the opening of the market, Petróleo Brasileiro S.A. - Petrobras, the Brazilian giant, lost the monopoly of the oil business. The P-50 Platform, with a capacity for 180,000 barrels per day, was imported based on REPETRO. When it began operating on April 21st, 2006, Brazil achieved self-sufficiency in oil production. The present work intends to estimate the main variables affecting the importation and exportation of goods and assets for E&D, showing how REPETRO works. We also intend to look at the results yielded by the REPETRO model for the development of the production of oil and gas in Brazil, as well as show proposals for its modernization. It has been established that even though since its implementation the REPETRO model has brought fiscal advantages through the reduction of tax costs relating to foreign commerce operations and the incentive of investments in the E&D area with the increase in the national oil production there remain the following limitations: lack of preparation and of knowledge of the model; lack of adjustement of the model to the reality of actitity of E&D of oil and gas; taxes over the pre-operational stage or investment in oil production stage; non-allowance of full access by the national industry to the supply of goods and products relating to the industrialization of goods allowed by REPETRO; other fiscal and administrative difficulties. We conclude that the REPETRO model is important for the development of the area of E&D of oil and gas, but not completely effective. It is necessary to change it or create a new model based on a new perspective of the customs treatment of the activities of exploration and production, minimizing administrative procedures relating to the operations of exportation and importation.

Estado, sociedade e subsistema de saúde no Brasil

Estado e sociedade brasileiros conviveram em descompasso, nos anos 80. A conseqüência imediata desse fenômeno foi o atendimento insuficiente de necessidades básicas da sociedade, nesse período, com aumento da entropia em vários subsistemas sociais brasileiros, dentre os quais o subsistema de saúde. Nesta tese, trabalhando com dados econômicos, sociais e de saúde, e construindo algumas variáveis-indicadores, confrontou-se, naquele período, necessidades da sociedade com ações do Estado, na área da saúde. Utilizando técnicas estatísticas - análise gráfica, associação estatística dos indicadores selecionados (matriz de correlação de PEARSON), análise em componentes principais, análise de agrupamento e análise de regressão linear múltipla com variáveis logaritímizadas - foi possível visualizar causas e conseqüências dessa alta entropia, caracterizada por desperdício de recursos e várias situações propensas à geração de crises nas organizações, setores e instituições do subsistema de saúde brasileiro. Propõe-se um método de alocação de recursos federais, objetivando minimizar desigualdades entre as Unidades da Federação, a partir de seus desempenhos na área de saúde.