PBL and B-Learning for Civil Engineering Students in a Transportation Course

The results of a pedagogical strategy implemented at the University of Sao Paulo at Sao Carlos are presented and discussed. The initiative was conducted in a transportation course offered to Civil Engineering students. The approach is a combination of problem-based learning and project-based learning (PBL) and blended-learning (B-learning). Starting in 2006, a different problem was introduced every year. From 2009 on, however, the problem-based learning concept was expanded to project-based learning. The performance of the students was analyzed using the following elements: (1) grades in course activities; (2) answers from a questionnaire designed for course evaluation; and (3) cognitive maps made to assess the effects of PBL through the comparison of the responses provided by the students involved and those not involved in the experiment. The results showed positive aspects of the method, such as a strong involvement of several students with the subject. A gradual increase in the average scores obtained by the students in the project activities (from 6.77 in 2006 to 8.24 in 2009) was concomitant with a better evaluation of these activities and of the course as a whole (90 and 97% of options "Good" or "Very good" in 2009, respectively). A growing interest in the field of transportation engineering as an alternative for further studies was also noticed. DOI: 10.1061/(ASCE)EI.1943-5541.0000115. (C) 2012 American Society of Civil Engineers.

Pore size regulates cell and tissue interactions with PLGA-CaP scaffolds used for bone engineering

A common subject in bone tissue engineering is the need for porous scaffolds to support cell and tissue interactions aiming at repairing bone tissue. As poly(lactide-co-glycolide)calcium phosphate (PLGACaP) scaffolds can be manufactured with different pore sizes, the aim of this study was to evaluate the effect of pore diameter on osteoblastic cell responses and bone tissue formation. Scaffolds were prepared with 85% porosity, with pore diameters in the ranges 470590, 590850 and 8501200 mu m. Rat bone marrow stem cells differentiated into osteoblasts were cultured on the scaffolds for up to 10 days to evaluate cell growth, alkaline phosphatase (ALP) activity and the gene expression of the osteoblast markers RUNX2, OSX, COL, MSX2, ALP, OC and BSP by real-time PCR. Scaffolds were implanted in critical size rat calvarial defects for 2, 4, and 8 weeks for histomorphometric analysis. Cell growth and ALP activity were not affected by the pore size; however, there was an increase in the gene expression of osteoblastic markers with the increase in the pore sizes. At 2 weeks all scaffolds displayed a similar amount of bone and blood vessels formation. At 4 and 8 weeks much more bone formation and an increased number of blood vessels were observed in scaffolds with pores of 470590 mu m. These results show that PLGACaP is a promising biomaterial for bone engineering. However, ideally, combinations of larger (similar to 1000 mu m) and smaller (similar to 500 mu m) pores in a single scaffold would optimize cellular and tissue responses during bone healing. Copyright (C) 2011 John Wiley & Sons, Ltd.

The Dependence of Retention Time on Gate Length in UTBOX FBRAM With Different Source/Drain Junction Engineering

The floating-body-RAM sense margin and retention-time dependence on the gate length is investigated in UTBOX devices using BJT programming combined with a positive back bias (so-called V th feedback). It is shown that the sense margin and the retention time can be kept constant versus the gate length by using a positive back bias. Nevertheless, below a critical L, there is no room for optimization, and the memory performances suddenly drop. The mechanism behind this degradation is attributed to GIDL current amplification by the lateral bipolar transistor with a narrow base. The gate length can be further scaled using underlap junctions.

The use of participant-observation protocol in an industrial engineering research

Based on literature, this article aims to present the "participant-observation" research protocol, and its practical application in the industrial engineering field, more specifically within the area of design development, and in the case shown by this article, of interiors' design. The main target is to identify the concept of the method, i.e., from its characteristics to structure a general sense about the subject, so that the protocol can be used in different areas of knowledge, especially those ones which are committed with the scientific research involving the expertise from researchers, and subjective feelings and opinions of the users of an engineering product, and how this knowledge can be benefic for product design, contributing since the earliest stage of design.

Metabolic engineering of beta-oxidation in Penicillium chrysogenum for improved semi-synthetic cephalosporin biosynthesis

Industrial production of semi-synthetic cephalosporins by Penicillium chrysogenum requires supplementation of the growth media with the side-chain precursor adipic acid. In glucose-limited chemostat cultures of P. chrysogenum, up to 88% of the consumed adipic acid was not recovered in cephalosporinrelated products, but used as an additional carbon and energy source for growth. This low efficiency of side-chain precursor incorporation provides an economic incentive for studying and engineering the metabolism of adipic acid in P. cluysogenum. Chemostat-based transcriptome analysis in the presence and absence of adipic acid confirmed that adipic acid metabolism in this fungus occurs via beta-oxidation. A set of 52 adipate-responsive genes included six putative genes for acyl-CoA oxidases and dehydrogenases, enzymes responsible for the first step of beta-oxidation. Subcellular localization of the differentially expressed acyl-CoA oxidases and dehydrogenases revealed that the oxidases were exclusively targeted to peroxisomes, while the dehydrogenases were found either in peroxisomes or in mitochondria. Deletion of the genes encoding the peroxisomal acyl-CoA oxidase Pc20g01800 and the mitochondrial acyl-CoA dehydrogenase Pc20g07920 resulted in a 1.6- and 3.7-fold increase in the production of the semi-synthetic cephalosporin intermediate adipoyl-6-APA, respectively. The deletion strains also showed reduced adipate consumption compared to the reference strain, indicating that engineering of the first step of beta-oxidation successfully redirected a larger fraction of adipic acid towards cephalosporin biosynthesis. (C) 2012 Elsevier Inc. All rights reserved.

Engineering Active Pharmaceutical Ingredients by Spray Drying: Effects on Physical Properties and In Vitro Dissolution

Active pharmaceutical ingredients have very strict quality requirements; minor changes in the physical and chemical properties of pharmaceuticals can adversely affect the dissolution rate and therefore the bioavailability of a given drug. Accordingly, the aim of the present study was to investigate the effect of spray drying on the physical and in vitro dissolution properties of four different active pharmaceutical ingredients, namely carbamazepine, indomethacin, piroxicam, and nifedipine. Each drug was dispersed in a solution of ethanol and water (70:30) and subjected to single-step spray drying using similar operational conditions. A complete characterization of the spray-dried drugs was performed via differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X-ray powder diffraction (XRPD), particle size distribution analysis, solubility analysis, and an in vitro dissolution study. The results from the thermal analysis and X-ray diffraction showed that, except for carbamazepine, no chemical modifications occurred as a result of spray drying. Moreover, the particle size distribution of all the spray-dried drugs significantly decreased. In addition, SEM images showed that most of the particles had an irregular shape. There was no significant improvement in the solubility of the spray-dried drugs compared with the unprocessed compounds; however, in general, the dissolution rates of the spray-dried drugs showed a remarkable improvement over their non-spray-dried counterparts. Therefore, the results from this study demonstrate that a single spray-drying step may lead to changes in the physical properties and dissolution characteristics of drugs and thus improve their therapeutic action.

Bacterial cellulose-collagen nanocomposite for bone tissue engineering

A nanocomposite based on bacterial cellulose (BC) and type I collagen (COL) was evaluated for in vitro bone regeneration. BC membranes were modified by glycine esterification followed by cross-linking of type I collagen employing 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide. Collagen incorporation was studied by spectroscopy analysis. X-Ray diffraction showed changes in the BC crystallinity after collagen incorporation. The elastic modulus and tensile strength for BC-COL decreased, while the strain at failure showed a slight increase, even after sterilization, as compared to pristine BC. Swelling tests and contact angle measurements were also performed. Cell culture experiments performed with osteogenic cells were obtained by enzymatic digestion of newborn rat calvarium revealed similar features of cell morphology for cultures grown on both membranes. Cell viability/proliferation was not different between BC and BC-COL membranes at day 10 and 14. The high total protein content and ALP activity at day 17 in cells cultured on BC-COL indicate that this composite allowed the development of the osteoblastic phenotype in vitro. Thus, BC-COL should be considered as alternative biomaterial for bone tissue engineering.

Multiobjective engineering design optimization problems: a sensitivity analysis approach

This paper proposes two new approaches for the sensitivity analysis of multiobjective design optimization problems whose performance functions are highly susceptible to small variations in the design variables and/or design environment parameters. In both methods, the less sensitive design alternatives are preferred over others during the multiobjective optimization process. While taking the first approach, the designer chooses the design variable and/or parameter that causes uncertainties. The designer then associates a robustness index with each design alternative and adds each index as an objective function in the optimization problem. For the second approach, the designer must know, a priori, the interval of variation in the design variables or in the design environment parameters, because the designer will be accepting the interval of variation in the objective functions. The second method does not require any law of probability distribution of uncontrollable variations. Finally, the authors give two illustrative examples to highlight the contributions of the paper.

Engineering knowledge-based variance-reduction simulation and G-dominance for structural frame robust optimization

[EN] This paper proposes the incorporation of engineering knowledge through both (a) advanced state-of-the-art preference handling decision-making tools integrated in multiobjective evolutionary algorithms and (b) engineering knowledge-based variance reduction simulation as enhancing tools for the robust optimum design of structural frames taking uncertainties into consideration in the design variables.The simultaneous minimization of the constrained weight (adding structuralweight and average distribution of constraint violations) on the one hand and the standard deviation of the distribution of constraint violation on the other are handled with multiobjective optimization-based evolutionary computation in two different multiobjective algorithms. The optimum design values of the deterministic structural problem in question are proposed as a reference point (the aspiration level) in reference-point-based evolutionary multiobjective algorithms (here g-dominance is used). Results including

A methodological research on software engineering applied to design of smart grids using a complex system approach

[ES] El reto de conseguir una red eléctrica más eficiente pasa por la introducción masiva de energías renovables en la red eléctrica, disminuyendo así las emisiones de CO2. Por ello, se propone no sólo controlar la producción, como se ha hecho hasta ahora, sino que también se propone controlar la demanda. Por ello, en esta investigación se evalúa el uso de la Ingeniería Dirigida por Modelos para gestionar la complejidad en el modelado de redes eléctricas, la Inteligencia de Negocio para analizar la gran cantidad de datos de simulaciones y la Inteligencia Colectiva para optimizar el reparto de energía entre los millones de dispositivos que se encuentran en el lado de la demanda.

Modellazione bidimensionale della propagazione nell'entroterra della inondazione da mare negli scenari dei previsti cambiamenti climatici

Le ricerche di carattere eustatico, mareografico, climatico, archeologico e geocronologico, sviluppatesi soprattutto nell’ultimo ventennio, hanno messo in evidenza che gran parte delle piane costiere italiane risulta soggetta al rischio di allagamento per ingressione marina dovuta alla risalita relativa del livello medio del mare. Tale rischio è la conseguenza dell’interazione tra la presenza di elementi antropici e fenomeni di diversa natura, spesso difficilmente discriminabili e quantificabili, caratterizzati da magnitudo e velocità molto diverse tra loro. Tra le cause preponderanti che determinano l’ingressione marina possono essere individuati alcuni fenomeni naturali, climatici e geologici, i quali risultano fortemente influenzati dalle attività umane soprattutto a partire dal XX secolo. Tra questi si individuano: - la risalita del livello del mare, principalmente come conseguenza del superamento dell’ultimo acme glaciale e dello scioglimento delle grandi calotte continentali; - la subsidenza. Vaste porzioni delle piane costiere italiane risultano soggette a fenomeni di subsidenza. In certe zone questa assume proporzioni notevoli: per la fascia costiera emiliano-romagnola si registrano ratei compresi tra 1 e 3 cm/anno. Tale subsidenza è spesso il risultato della sovrapposizione tra fenomeni naturali (neotettonica, costipamento di sedimenti, ecc.) e fenomeni indotti dall’uomo (emungimenti delle falde idriche, sfruttamento di giacimenti metaniferi, escavazione di materiali per l’edilizia, ecc.); - terreni ad elevato contenuto organico: la presenza di depositi fortemente costipabili può causare la depressione del piano di campagna come conseguenza di abbassamenti del livello della falda superficiale (per drenaggi, opere di bonifica, emungimenti), dello sviluppo dei processi di ossidazione e decomposizione nei terreni stessi, del costipamento di questi sotto il proprio peso, della carenza di nuovi apporti solidi conseguente alla diminuita frequenza delle esondazioni dei corsi d’acqua; - morfologia: tra i fattori di rischio rientra l’assetto morfologico della piana e, in particolare il tipo di costa (lidi, spiagge, cordoni dunari in smantellamento, ecc. ), la presenza di aree depresse o comunque vicine al livello del mare (fino a 1-2 m s.l.m.), le caratteristiche dei fondali antistanti (batimetria, profilo trasversale, granulometria dei sedimenti, barre sommerse, assenza di barriere biologiche, ecc.); - stato della linea di costa in termini di processi erosivi dovuti ad attività umane (urbanizzazione del litorale, prelievo inerti, costruzione di barriere, ecc.) o alle dinamiche idro-sedimentarie naturali cui risulta soggetta (correnti litoranee, apporti di materiale, ecc. ). Scopo del presente studio è quello di valutare la probabilità di ingressione del mare nel tratto costiero emiliano-romagnolo del Lido delle Nazioni, la velocità di propagazione del fronte d’onda, facendo riferimento allo schema idraulico del crollo di una diga su letto asciutto (problema di Riemann) basato sul metodo delle caratteristiche, e di modellare la propagazione dell’inondazione nell’entroterra, conseguente all’innalzamento del medio mare . Per simulare tale processo è stato utilizzato il complesso codice di calcolo bidimensionale Mike 21. La fase iniziale di tale lavoro ha comportato la raccolta ed elaborazione mediante sistema Arcgis dei dati LIDAR ed idrografici multibeam , grazie ai quali si è provveduto a ricostruire la topo-batimetria di dettaglio della zona esaminata. Nel primo capitolo è stato sviluppato il problema del cambiamento climatico globale in atto e della conseguente variazione del livello marino che, secondo quanto riportato dall’IPCC nel rapporto del 2007, dovrebbe aumentare al 2100 mediamente tra i 28 ed i 43 cm. Nel secondo e terzo capitolo è stata effettuata un’analisi bibliografica delle metodologie per la modellazione della propagazione delle onde a fronte ripido con particolare attenzione ai fenomeni di breaching delle difese rigide ed ambientali. Sono state studiate le fenomenologie che possono inficiare la stabilità dei rilevati arginali, realizzati sia in corrispondenza dei corsi d’acqua, sia in corrispondenza del mare, a discapito della protezione idraulica del territorio ovvero dell’incolumità fisica dell’uomo e dei territori in cui esso vive e produce. In un rilevato arginale, quale che sia la causa innescante la formazione di breccia, la generazione di un’onda di piena conseguente la rottura è sempre determinata da un’azione erosiva (seepage o overtopping) esercitata dall’acqua sui materiali sciolti costituenti il corpo del rilevato. Perciò gran parte dello studio in materia di brecce arginali è incentrato sulla ricostruzione di siffatti eventi di rottura. Nel quarto capitolo è stata calcolata la probabilità, in 5 anni, di avere un allagamento nella zona di interesse e la velocità di propagazione del fronte d’onda. Inoltre è stata effettuata un’analisi delle condizioni meteo marine attuali (clima ondoso, livelli del mare e correnti) al largo della costa emiliano-romagnola, le cui problematiche e linee di intervento per la difesa sono descritte nel quinto capitolo, con particolare riferimento alla costa ferrarese, oggetto negli ultimi anni di continui interventi antropici. Introdotto il sistema Gis e le sue caratteristiche, si è passati a descrivere le varie fasi che hanno permesso di avere in output il file delle coordinate x, y, z dei punti significativi della costa, indispensabili al fine della simulazione Mike 21, le cui proprietà sono sviluppate nel sesto capitolo.

Studio di biomateriali usati come scaffold per Tissue Engineering e loro caratterizzazione con tecniche spettroscopiche vibrazionali e di analisi termica

This research investigated someone of the main problems connected to the application of Tissue Engineering in the prosthetic field, in particular about the characterization of the scaffolding materials and biomimetic strategies adopted in order to promote the implant integration. The spectroscopic and thermal analysis techniques were usefully applied to characterize the chemico-physical properties of the materials such as – crystallinity; – relative composition in case of composite materials; – Structure and conformation of polymeric and peptidic chains; – mechanism and degradation rate; – Intramolecular and intermolecular interactions (hydrogen bonds, aliphatic interactions). This kind of information are of great importance in the comprehension of the interactions that scaffold undergoes when it is in contact with biological tissues; this information are fundamental to predict biodegradation mechanisms and to understand how chemico-physical properties change during the degradation process. In order to fully characterize biomaterials, this findings must be integrated by information relative to mechanical aspects and in vitro and in vivo behavior thanks to collaborations with biomedical engineers and biologists. This study was focussed on three different systems that correspond to three different strategies adopted in Tissue Engineering: biomimetic replica of fibrous 3-D structure of extracellular matrix (PCL-PLLA), incorporation of an apatitic phase similar to bone inorganic phase to promote biomineralization (PCL-HA), surface modification with synthetic oligopeptides that elicit the interaction with osteoblasts. The characterization of the PCL-PLLA composite underlined that the degradation started along PLLA fibres, which are more hydrophylic, and they serve as a guide for tissue regeneration. Moreover it was found that some cellular lines are more active in the colonization of the scaffold. In the PCL-HA composite, the weight ratio between the polymeric and the inorganic phase plays an essential role both in the degradation process and in the biomineralization of the material. The study of self-assembling peptides allowed to clarify the influence of primary structure on intermolecular and intermolecular interactions, that lead to the formation of the secondary structure and it was possible to find a new class of oligopeptides useful to functionalize materials surface. Among the analytical techniques used in this study, Raman vibrational spectroscopy played a major role, being non-destructive and non-invasive, two properties that make it suitable to degradation studies and to morphological characterization. Also micro-IR spectroscopy was useful in the comprehension of peptide structure on oxidized titanium: up to date this study was one of the first to employ this relatively new technique in the biomedical field.

Ottimizzazione di un Sistema di Key Performance Indicators per la Divisione Engineering aziendale. Il caso INTERTABA S.p.A.

Il seguente elaborato è la diretta conseguenza di un periodo di stage, pari a cinque mesi, svolto presso l’azienda INTERTABA S.p.A., a Zola Predosa (BO). Il Dipartimento presso cui è stato svolto il tirocinio è l’Engineering. In particolare è stata compiuta un’analisi dei KPIs presenti e sono state proposte delle azioni migliorative. Il lavoro si è sviluppato in tre fasi. Nella prima fase è stata fatta un’analisi dei KPIs attuali per ciascuna funzione appartenente all’Engineering: Engineering Support, Project Engineering, Plant & Utilities Maintenance, Technical Warehouse e General Services. Nella seconda fase sono state descritte, per ciascuna funzione, alcune proposte migliorative per i KPIs presenti. Infine, per alcune funzioni, sono state proposte alcune iniziative in merito all’implementazione di nuovi KPIs.