Multicointegration, polynomial cointegration and I(2) cointegration with structural breaks. An application to the sustainability of the US external deficit

In this paper we model the multicointegration relation, allowing for one structural break. Since multicointegration is a particular case of polynomial or I(2) cointegration, our proposal can also be applied in these cases. The paper proposes the use of a residualbased Dickey-Fuller class of statistic that accounts for one known or unknown structural break. Finite sample performance of the proposed statistic is investigated by using Monte Carlo simulations, which reveals that the statistic shows good properties in terms of empirical size and power. We complete the study with an empirical application of the sustainability of the US external deficit. Contrary to existing evidence, the consideration of one structural break leads to conclude in favour of the sustainability of the US external deficit.

Estimation of Water Circulation in a Mediterranean Salt Marsh and its Relationship with Flooding Causes

Variations in water volume in small depressions in Mediterranean salt marshes in Girona (Spain) are described and the potential causes for these variations analysed. Although the basins appear to be endorrheic, groundwater circulation is intense, as estimated from the difference between water volume observed and that expected from the balance precipitation / evaporation. The rate of variation in volume (VR = AV / VAt) may be used to estimate groundwater supply ('circulation'), since direct measurements of this parameter are impossible. Volume.conductivity figures can also be used to estimate the quantity of circulation, and to investigate the origin of water supplied to the system. The relationships between variations in the volume of water in the basins and the main causes of flooding are also analysed. Sea storms, rainfall levels and strong, dry northerly winds are suggested as the main causes of the variations in the volumes of basins. The relative importance assigned to these factors has changed, following the recent regulation of freshwater flows entering the system

Yrityksen strategiaprosessi : Näkökulmia strategisen johtamisen kehitämiseksi konserniorganisaatiossa

Tämän tutkimuksen tavoitteena oli määritellä strategiaprosessiin liittyvät kriittiset alueet, konsernijohdon tehtävät strategiaprosessissa sekä edellisten pohjalta kehittää konsernityyppiselle yritykselle normatiivinen strategiaprosessin malli kriittisten alueiden hallitsemiseksi. Tavoitteena oli myös lisätä strategisen ajattelun ja strategiaprosessien ymmärtämistä selittämällä niiden historiallista kehittymistä sekä niiden käsitteistöä ja käsitteiden sisältöä. Probleemaa lähestyttiin sekä doktriinin kautta että tulkitsemalla strategiaprosessissa ilmeneviä ongelmia ja analysoimalla niiden syy ja seuraussuhteita. Käsillä oleva teoreettis praktinen tutkimus toteutettiin osittain toiminta-analyyttisella tutkimusotteella, osittain toiminta analyyttisella tutkimusotteella case tutkimuksen ja komparatiivisen analyysin tukemana sekä osittain päätöksentekometodologisella tutkimusotteella. Työn teoreettinen osa tehtiin kirjallisuustutkimuksena. Siinä luotiin strategiaprosessin ja konsernijohtamisen käsitteellinen perusta ja tutkimuksen viitekehys. Konsernijohtaminen laajennettiin tutkimuksessa tulosten osalta yleistäen koskemaan muitakin hajautettuja yritysorganisaatioita kuin pelkän juridiikan pohjalta muodostuneita konserneja. Tutkimuksen aluksi tarkasteltiin strategisen ajattelun koulukuntia eri näkemyksineen sekä toisaalta strategia-ajattelun kehittymistrendeja 1950 luvulta nykyhetkeen. Samoin tarkasteltiin sitä, kuinka strategiaprosessit oval kehittyneet samara ajanjaksona. Huomion painopisteen todettiin siirtyneen strategisen johtamisen inhimilliseen puoleen strategisem johtajuuden samalla korostuessa ja strategisen ajattelun laajentuessa Empiirinen osuus toteutettiin case tutkimuksena. Sen kuluessa kartoitettiin strategiaprosessin keskeiset ongelma alueet ja analysoitiin niiden takana olevat syyt, jotta voidin määritellä strategiapmsessin kehittämisen suunnat ja painopisteaiueet. Teoreettisen ja empiirisen osan penisteella määriteltiin strategiaprosessin kriittiset alueet yleisellä tasolla. Kriittisellä alueella tarkoitetaan asiakokonaisuutta tai asiaa, jonka on oltava kunaossa, jotta strategiaprosessit toimisivat. Nämä alueet liittyvat itse strategiaprosessiin suoraan tai välillisesti muun johtamistyön kautta. Strategiaprosessin kriittisten alueiden määrittelyn yhteydessä asetettiin doktriiniin tukeutuen strategiaprosessin kehittämissuunnat konsernijohdon nakäkökulmasta tarkasteltuna. Näihin kehittämissuuntiin ja edelleen doktriiniin tukeutuen määriteltiin konsernijohdon strategiaprosessin substanssitehtävät, prosessia tukevat tehtävät sekä prosessin toteuttamis- ja kehittämistehtävtä. Konsernijohdon strategiaprosessin tehtävät eivät muodosta sekventiaalista ja hierarkista järjestelmää vaan ovat joukko aktiviteetteja, joita toteutetaan tarpeen mukaan. Konsernijohdon strategiaprosessi määriteltiin ja kuvattiin tutkimuksessa johdon työskentelyprosessiksi sellaisten toimeenpanokelpoisten strategioiden tuottamiseksi ja toimeenpanemiseksi, jotka lisäävät yrityksen (konsernin) arvoa omistajan näkökulmasta mutta huomioivat myös muiden keskeisten sidosryhmien vaatimukset, tavoitteet ja rajoitteet. Konsernijohdon strategiaprosessi nähdään tässä jatkuvana konsernitasoisena päämäärä- ja keinopuolen tarkasteluna. Siinä konsernijohto tiedostaa konsernin ulkoisesta ja sisäisestä ymparistostä tulevat signaalit sekä pitää yllä näkemystä konsernin strategisesta asemasta. Tiedon massan näkemyksen saavutettua kriittisen rajansa se pakottaa konsernijohdon aivioimaan aiempia ratkaisuja uudessa valossa. Tämä validointi perustuu jatkuvasti esitettyihin neljään kysymykseen: onko ympäristö , premissi ja toimeenpanoseurannasta kertyneen tietämyksen perusteella nähtävissä vaikutuksia välittömiin toimenpiteisiin, vaikutuksia toimintasuunnitelmiin tai kriittisiin seurannan kohteisiin, vaikutuksia suunnanvalintoihin tai vaikutuksia perususkomuksiin? Konsernijohdon strategiaprosessi etenee jatkuvana prosessina päätösten ja ajan virrassa.

A Novel Missense Mutation, I890T, in the Pore Region of Cardiac Sodium Channel Causes Brugada Syndrome

Brugada syndrome (BrS) is a life-threatening, inherited arrhythmogenic syndrome associated with autosomal dominant mutations in SCN5A, the gene encoding the cardiac Na₊ channel alpha subunit (Naᵥ1.5). The aim of this work was to characterize the functional alterations caused by a novel SCN5A mutation, I890T, and thus establish whether this mutation is associated with BrS. The mutation was identified by direct sequencing of SCN5A from the proband’s DNA. Wild-type (WT) or I890T Naᵥ1.5 channels were heterologously expressed in human embryonic kidney cells. Sodium currents were studied using standard whole cell patch-clamp protocols and immunodetection experiments were performed using an antibody against human Naᵥ1.5 channel. A marked decrease in current density was observed in cells expressing the I890T channel (from -52.0 ± 6.5 pA/pF, n=15 to 35.9 ± 3.4 pA/pF, n = 22, at -20 mV, WT and I890T, respectively). Moreover, a positive shift of the activation curve was identified (V½ =-32.0 ± 0.3 mV, n = 18, and -27.3 ± 0.3 mV, n = 22, WT and I890T, respectively). No changes between WT and I890T currents were observed in steady-state inactivation, time course of inactivation, slow inactivation or recovery from inactivation parameters. Cell surface protein biotinylation analyses confirmed that Nav1.5 channel membrane expression levels were similar in WT and I890T cells. In summary, our data reveal that the I890T mutation, located within the pore of Nav1.5, causes an evident loss-of-function of the channel. Thus, the BrS phenotype observed in the proband is most likely due to this mutation

Internal standard versus external standard calibration: an uncertainty case study of a liquid chromatography analysis

Traditionally, in the cigarettes industry, the determination of ammonium ion in the mainstream smoke is performed by ion chromatography. This work studies this determination and compares the results of this technique with the use of external and internal standard calibration. A reference cigarette sample presented measurement uncertainty of 2.0 μg/cigarette and 1.5 μg/cigarette, with external and internal standard, respectively. It is observed that the greatest source of uncertainty is the bias correction factor and that it is even more significant when using external standard, confirming thus the importance of internal standardization for this correction.

Receptores A3 da adenosina: uma nova abordagem terapêutica no câncer

Cancer is a multi-factorial disease linked with different initiating causes, cofactors and promoters, and several types of cellular damage. Advancing knowledge on the cellular and molecular biology of the processes that regulate cell proliferation, cell differentiation and cellular responses to external signals, has provided a wealth of information about the cancer cell and how it differs from a normal one. These findings make available a number of potential targets for new therapeutic approaches. The Medicinal Chemistry artwork performed so far in the development of selective and potent adenosine receptor A3 ligands, a current cancer target, will be highlighted in this work.

Powdery mildew of Ruta graveolens in Brazil caused by Oidiopsis haplophylli

Oidiopsis haplophylli is described causing powdery mildew on Ruta graveolens for the first time in Brazil (Viçosa, MG). The fungus causes yellowing of infected leaves accompanied by the presence of a whitish mycelial colony abaxially. The following combination of characters typical of this species was observed on the specimens collected in Viçosa: mycelium hypophyllous, hemiendophytic (partly external and partly internal), entering the leaves through the stomata; conidiophores hypophyllous, produced from the internal mycelium emerging through the stomata, cylindrical, hyaline, smooth; conidia, isolate, dimorphic - primary conidia lanceolate, 66.5-91.5 x 11.0-20.0 mm l/w ratio 3.5-6.2, secondary conidia cylindrical with rounded ends, 57.0-81.5 x 13.5-20.0 mm, l/w ratio 3.1 - 5.3, aseptate, hyaline, smooth.

Carbon footprint as part of a company’s external environmental communication

The aim of this thesis was to find out how the carbon footprint calculations can be utilized in the company’s external environmental communication, what is the demand for carbon footprint from the market, and how the other actors in the forest industry have approached the issue. The aim was to recognize the best practises to communicate carbon footprints and to find possibilities to extend the UPM-Kymmene Wood Oy’s mill specific carbon footprints. This research included a literature review, an inquiry to the UPM-Kymmene Wood Oy’s sales offices, and Internet survey concerning the external environmental communication in the forest industry and three small case studies based on mill specific parameters. The inquiry to the sales offices showed that the carbon footprint is not yet a common demand from the customers in the wood product sector. In addition, the Internet survey showed that generally in the forest industry, not much has been done concerning carbon footprint communication so far. The biggest challenge in carbon footprint communication is the variation in the knowledge level of the receivers. In addition btob and btoc communication situations demand a different approach to the issue. Carbon profile brochures developed in the company can be seen as suitable for btob communication situations. Case studies have shown that the contribution of final product transport to the overall carbon footprint was significant. It was recommended to include post mill transport in the carbon footprint information supplied to the btob customers. When discussing environmental communication on a general level it can be stated that a good external environmental communication is based on facts, is open and proactive and takes into account the needs of the receiver. However, the openness and the quality of external environmental communication are essentially strategic decisions. The significance of internal communication as well as the knowhow in the communication and marketing networks play a major role in achieving success in external environmental communication. Carbon footprints are only one part of good balanced external environmental communication. One specific environmental feature like carbon footprint should not be over emphasized to the detriment of other important environmental aspects.

External knowledge transfer mechanisms in service business acquisition

In knowledge-intensive economy an effective knowledge transfer is a part of the firm’s strategy to achieve a competitive advantage in the market. Knowledge transfer related to a variety of mechanisms depends on the nature of knowledge and context. The topic is, however, very little empirical studied and there is a research gap in scientific literature. This study examined and analyzed external knowledge transfer mechanisms in service business and especially in the context of acquisitions. The aim was to find out what kind of mechanisms was used when the buyer began to transfer data e.g. their own agendas and practices to the purchased units. Another major research goal was to identify the critical factors which contributed to knowledge transfer through different mechanisms. The study was conducted as a multiple-case study in a consultative service business company, in its four business units acquired by acquisition, in various parts of the country. The empirical part of the study was carried out as focus group interviews in each unit, and the data were analyzed using qualitative methods. The main findings of this study were firstly the nine different knowledge transfer mechanisms in service business acquisition: acquisition management team as an initiator, unit manager as a translator, formal training, self-directed learning, rooming-in, IT systems implementation, customer relationship management, codified database and ecommunication. The used mechanisms brought up several aspects as giving the face to changing, security of receiving right knowledge and correctly interpreted we-ness atmosphere, and orientation to use more consultative touch with customers. The study pointed out seven critical factors contributed to different mechanisms: absorption, motivation, organizational learning, social interaction, trust, interpretation and time resource. The two last mentioned were new findings compared to previous studies. Each of the mechanisms and the related critical factors contributed in different ways to the activity in different units after the acquisition. The role of knowledge management strategy was the most significant managerial contribution of the study. Phenomenon is not recognized enough although it is strongly linked in knowledge based companies. The recognition would help to develop a better understanding of the business through acquisitions, especially in situations such as where two different knowledge strategies combines in new common company.

Elemental analysis of wood materials by external millibeam thick target PIXE

PIXE (Particle Induce X-ray Emission spectrometry) was used for analysing stem bark and stem wood of Scots pine, Norway spruce and Silver birch. Thick samples were irradiated, in laboratory atmosphere, with 3 MeV protons and the beam current was measured indirectly using a photo multiplicator (PM) tube. Both point scans and bulk analyses were performed with the 1 mm diameter proton beam. In bulk analyses, whole bark and sectors of discs of the stem wood were dry ashed at 550 ˚C. The ashes were homogenised by shaking and prepared to target pellets for PIXE analyses. This procedure generated representative samples to be analysed, but the enrichment also enabled quantification of some additional trace elements. The ash contents obtained as a product of the sample preparation procedure also showed to be of great importance in the evaluation of results in environmental studies. Spot scans from the pith of pine wood outwards, showed clearly highest concentrations of manganese, calcium and zinc in the first spot irradiated, or 2-3 times higher than in the surrounding wood. For stem wood from the crown part of a pine this higher concentration level was found in the first four spots/mms, including the pith and the two following growth rings. Zinc showed increasing concentrations outwards in sapwood of the pine stem, with the over-all lowest concentrations in the inner half of the sapwood. This could indicate emigration of this element from sapwood being under transformation to heartwood. Point scans across sapwood of pine and spruce showed more distinct variations in concentrations relative to hearth wood. Higher concentrations of e.g. zinc, calcium and manganese were found in earlywood than in denser latewood. Very high concentrations of iron and copper were also seen for some earlywood increments. The ash content of stem bark is up to and order higher than for the stem wood. However, when the elemental concentration in ashes of bark and wood of the same disc were compared, these are very similar – this when trees are growing at spots with no anthropogenic contamination from the atmosphere. The largest difference was obtained for calcium which appeared at two times high concentrations in ashes of bark than in ashes of the wood (ratio of 2). Pine bark is often used in monitoring of atmospheric pollution, where concentrations in bark samples are compared. Here an alternative approach is suggested: Bark and the underlying stem wood of a pine trees are dry ashed and analysed. The elemental concentration in the bark ash is then compared to the concentration of the same element in the wood ash. Comparing bark to wood includes a normalisation for the varying availability of an element from the soil at different sites. When this comparison is done for the ashes of the materials, a normalisation is also obtained for the general and locally different enrichment of inorganic elements from wood to bark. Already a ratio >2 between the concentration in the bark ash and the concentration in the wood ash could indicate atmospheric pollution. For monitoring where bark is used, this way of “inwards” comparison is suggested - instead of comparing to results from analyses of bark from other trees (read reference areas), growing at sites with different soil and, locally, different climate conditions. This approach also enables evaluation of atmospheric pollution from sampling of only relative few individual trees –preferable during forest felling.

Methods and Models for Accelerating Dynamic Simulation of Fluid Power Circuits

The objective of this dissertation is to improve the dynamic simulation of fluid power circuits. A fluid power circuit is a typical way to implement power transmission in mobile working machines, e.g. cranes, excavators etc. Dynamic simulation is an essential tool in developing controllability and energy-efficient solutions for mobile machines. Efficient dynamic simulation is the basic requirement for the real-time simulation. In the real-time simulation of fluid power circuits there exist numerical problems due to the software and methods used for modelling and integration. A simulation model of a fluid power circuit is typically created using differential and algebraic equations. Efficient numerical methods are required since differential equations must be solved in real time. Unfortunately, simulation software packages offer only a limited selection of numerical solvers. Numerical problems cause noise to the results, which in many cases leads the simulation run to fail. Mathematically the fluid power circuit models are stiff systems of ordinary differential equations. Numerical solution of the stiff systems can be improved by two alternative approaches. The first is to develop numerical solvers suitable for solving stiff systems. The second is to decrease the model stiffness itself by introducing models and algorithms that either decrease the highest eigenvalues or neglect them by introducing steady-state solutions of the stiff parts of the models. The thesis proposes novel methods using the latter approach. The study aims to develop practical methods usable in dynamic simulation of fluid power circuits using explicit fixed-step integration algorithms. In this thesis, twomechanisms whichmake the systemstiff are studied. These are the pressure drop approaching zero in the turbulent orifice model and the volume approaching zero in the equation of pressure build-up. These are the critical areas to which alternative methods for modelling and numerical simulation are proposed. Generally, in hydraulic power transmission systems the orifice flow is clearly in the turbulent area. The flow becomes laminar as the pressure drop over the orifice approaches zero only in rare situations. These are e.g. when a valve is closed, or an actuator is driven against an end stopper, or external force makes actuator to switch its direction during operation. This means that in terms of accuracy, the description of laminar flow is not necessary. But, unfortunately, when a purely turbulent description of the orifice is used, numerical problems occur when the pressure drop comes close to zero since the first derivative of flow with respect to the pressure drop approaches infinity when the pressure drop approaches zero. Furthermore, the second derivative becomes discontinuous, which causes numerical noise and an infinitely small integration step when a variable step integrator is used. A numerically efficient model for the orifice flow is proposed using a cubic spline function to describe the flow in the laminar and transition areas. Parameters for the cubic spline function are selected such that its first derivative is equal to the first derivative of the pure turbulent orifice flow model in the boundary condition. In the dynamic simulation of fluid power circuits, a tradeoff exists between accuracy and calculation speed. This investigation is made for the two-regime flow orifice model. Especially inside of many types of valves, as well as between them, there exist very small volumes. The integration of pressures in small fluid volumes causes numerical problems in fluid power circuit simulation. Particularly in realtime simulation, these numerical problems are a great weakness. The system stiffness approaches infinity as the fluid volume approaches zero. If fixed step explicit algorithms for solving ordinary differential equations (ODE) are used, the system stability would easily be lost when integrating pressures in small volumes. To solve the problem caused by small fluid volumes, a pseudo-dynamic solver is proposed. Instead of integration of the pressure in a small volume, the pressure is solved as a steady-state pressure created in a separate cascade loop by numerical integration. The hydraulic capacitance V/Be of the parts of the circuit whose pressures are solved by the pseudo-dynamic method should be orders of magnitude smaller than that of those partswhose pressures are integrated. The key advantage of this novel method is that the numerical problems caused by the small volumes are completely avoided. Also, the method is freely applicable regardless of the integration routine applied. The superiority of both above-mentioned methods is that they are suited for use together with the semi-empirical modelling method which necessarily does not require any geometrical data of the valves and actuators to be modelled. In this modelling method, most of the needed component information can be taken from the manufacturer’s nominal graphs. This thesis introduces the methods and shows several numerical examples to demonstrate how the proposed methods improve the dynamic simulation of various hydraulic circuits.

Theorica Pantegni . Facsimile and Transcription of the Helsinki manuscript (Codex EÖ.II.14)

The Theorica Pantegni is a medieval medical textbook written in Latin. The author was Constantine the African (Constantinus Africanus), a monk of Tunisian origin. He compiled the work in the latter half of the eleventh century at the Benedictine monastery of Monte Cassino in Italy. - Manuscript Eö.II.14, containing the Theorica Pantegni published here, belongs today to the National Library of Finland. It can be dated to the third quarter of the twelfth century, which makes it one of the earliest surviving exemplars of the Theorica Pantegni: over seventy manuscripts of the work survive, of which about fifteen can be dated to the twelfth century. Manuscript Eö.II.14 is written in black ink on 210 parchment leaves (recto and verso), amounting to 420 pages, in pre-Gothic script. - The present text is a transcription of Ms Eö.II.14. The goal is to provide the reader with an accessible text that is faithful to the original.