960 resultados para door automatics
Resumo:
La storiografia statunitense, a partire dagli anni Cinquanta, vide l’affermarsi di una nuova interpretazione della politica estera americana. Archiviata la storia diplomatica come storia dei trattati o storia delle interazioni delle élites dominanti, abbandonata una visione incentrata sull’equilibrio di potenza, il dibattito storiografico si arricchì della cosiddetta interpretazione «revisionista», antitetica rispetto a quella che, fino a quel momento, aveva predominato. Soggetto di analisi storica restava sempre lo Stato ma l’enfasi maggiore era posta sui fattori economici che ne influenzavano l’azione: si metteva in rilievo l’interazione tra l’interesse privato e il soggetto statale. Capofila di questa nuova scuola fu William Appleman Williams. Questa ricerca si pone l’obiettivo di delineare il contesto storiografico dal quale emersero gli studi di Williams e di cui egli ne roviesciò alcuni assunti fondamentali. Si intende tracciare il suo percorso intellettuale – storiografico e pubblico – al fine di restituire la complessità di un personaggio che divenne un vero e proprio «intellettuale pubblico». I quesiti, a cui questa ricerca vuole dar risposta riguardano l’evoluzione del percorso intellettuale di Williams tanto in ambito storiografico quanto, più in generale, in quello pubblico; il contributo alla ridefinizione dell’identità statunitense e del suo ruolo internazionale; il lascito della sua riflessione nella storiografia. Prendendo le mosse dall’idea di frontiera proposta da Turner, Williams sostenne che la fine dell’espansione territoriale «interna» aveva obbligato gli Stati Uniti a cercare nuovi mercati per il proprio surplus. Era stata tale necessità a catalizzare la Open Door Diplomacy, guidata da ragioni economiche, che presto identificarono l’interesse nazionale per trasformarsi in una vera e propria ideologia nel XX secolo.L’esito di tale politica estera fu la creazione di un impero non più territoriale ma frutto dell’espansione economica. E proprio questa riflessione sull’impero influenzò, negli anni Sessanta, la protesta studentesca che chiese un ripensamento del ruolo internazionale degli Stati Uniti.
Resumo:
Come si evince dal titolo della tesi, la ricerca effettuata dal presente candidato nel corso del dottorato di ricerca ha avuto ad oggetto lo studio della materia relativa ai trasporti nell’ambito di diversi sistemi giuridici europei, con particolare attenzione ai risvolti di carattere pratico che l’interpretazione delle normative uniformi poteva produrre nell’ambito delle diverse giurisdizioni nonché alle diverse impostazioni e alla variegata gamma di soluzioni interpretative che nell’ambito di problemi simili possono essere adottate a seconda che una stessa questione venga discussa in un ordinamento piuttosto che in un altro. Dall’avvento del trasporto marittimo di containers alla necessità di disciplinare l’intera materia attraverso una normativa multimodale il passo è estremamente breve, posto che, proprio in considerazione delle caratteristiche proprie del trasporto containerizzato, gli aventi diritto al carico sono principalmente interessati al completamente del trasferimento door-to-door inteso nella sua globalità, piuttosto che al buon esito del trasporto sulla singola tratta marittima. Il progetto di revisione delle Regole dell’Aja-Visby adottato dall’United Nations Commission on International Trade Law (Uncitral) e il Comité Maritime International (CMI) costituisce per definizione un progetto limitato ad un trasporto multimodale comprendente necessariamente una tratta marittima, ma rappresenta comunque un interessante banco di prova per valutare la funzionalità di strumenti di recente impiego, come ad esempio i cosiddetti e-documents, concetto peraltro già inserito nel progetto UNCITRAL, anche se con scarsi elementi di reale novità rispetto alla tradizionale disciplina relativa ai documenti cartacei. Proprio la parte relativa ai documenti e titoli di viaggio merita particolare attenzione soprattutto in riferimento alle problematiche connesse al traffico containerizzato, con particolare riferimento al concetto di transhipment, e alla conseguente necessità che la polizza garantisca al legittimo portatore una copertura completa sull’intero viaggio della merce, oltre a dargli la possibilità di individuare agevolmente la propria controparte contrattuale, e cioè il vettore.
Resumo:
Im Zentrum der vorliegenden Untersuchung steht die Nutzung von Medizinalpflanzen vor dem Hintergrund einer zurückgehenden Phytodiversität in Nordbenin. Die Dissertation ba-siert auf ethnologischen Forschungen, die in das interdisziplinäre Forschungsprojekt BIOTA (Biodiversity Monitoring Transect Analysis in Africa) eingebunden sind. Das BIOTA-Projekt untersucht die Wirkung menschlichen Handelns (insbesondere Nutzung) auf die Biodiversi-tät und versucht aus diesen Erkenntnissen Maßnahmen zum Erhalt der biologischen Vielfalt abzuleiten. Die vorliegende Studie basiert auf einem 13-monatigen Feldforschungsaufenthalt im Zeitraum von April 2004 bis August 2006 in der nordbeninischen Gemeinde Ouassa-Pehunco. Meine Informanten sind überwiegend traditionelle Heiler, mit denen ich standardi-sierte und offene Interviews durchführte, deren Behandlungsverfahren und Heilzeremonien ich teilnehmend beobachtete sowie dokumentierte und auf deren Initiative hin ich mich bei dem Aufbau eines Medizinalpflanzengartens einbrachte (cf. Kap. 1). In diesem Forschungsfeld situiere ich mich mit der Frage nach dem Einfluss einer verän-derten Pflanzenvielfalt auf die traditionelle medizinische Versorgung der Baatombu Nordbe-nins. Die Beantwortung dieser Frage erfolgt in mehreren Schritten. 1. Die Phytodiversität nimmt, wie von naturwissenschaftlicher Seite bestätigt, in der Region ab. 2. Lokale Heilkun-dige nehmen diesen Rückgang an verfügbaren Heilpflanzen ebenso wahr. 3. Die Abnahme der Pflanzenbestände führen die Heiler vor allem auf den Baumwollanbau und die demogra-fischen Entwicklungen der Region zurück - dies entspricht ebenfalls den Auffassungen von Naturwissenschaftlern, die eine Verdichtung der landwirtschaftlichen Bodennutzung fest-stellten. 4. Heilkundige und Heilpflanzenverkäuferinnen vermerken eine zunehmende Nach-frage nach lokaler Pflanzenmedizin aufgrund der steigenden Bevölkerungszahlen. 5. Die pflanzenbasierte Gesundheitsversorgung der lokalen Bevölkerung ist jedoch relativ gesi-chert, da die Heiler sich alternativ wirkender Medizinalpflanzen bedienen, ihre Therapiefor-men der veränderten Lage anpassen (z.B. geringere Dosierungen) und sie regelmäßig genutz-te Pflanzen im Medizinalpflanzengarten Guson wieder anpflanzen. Ein wichtiger Aspekt der Arbeit ist, dass die Heilpraktiken der Baatombu nicht allein auf naturheilkundlichem Erfahrungswissen beruhen, sondern in magisch-religiöse Vorstellungen eingebettet sind (cf. Kap. 2). Demzufolge untersuche ich die lokalen Krankheits- und Ge-sundheitsvorstellungen und die symbolischen Klassifikationen von Heilpflanzen und Krank-heiten (cf. Kap. 3). Ich stellte fest, dass nach Auffassung von Heilkundigen soziokulturelle Faktoren wie der Zeitpunkt und der Ort einer Sammlung sowie entsprechende Ernte-Rituale die medizinische Wirksamkeit von Pflanzen maßgeblich bedingen (cf. Kap. 5). Die Umwelt-klassifikation der Heiler (Landschafts- und Vegetationstypen) richtet sich demzufolge nach dem medizinischen Wert, den sie einer Heilpflanze zuschreiben (cf. Kap.4). Basierend auf diesen Erkenntnissen wurde von einigen engagierten Heilern und mit Un-terstützung von BIOTA, der GTZ und der Deutschen Botschaft der Medizinalpflanzengarten Guson eingerichtet, der eine Antwort auf die regionale Ressourcenverknappung darstellt und in seiner Anlage dem lokalen ökologischen und heilkundlichen Wissen der Heiler entspricht (cf. Kap. 6). Den Anwendungsbezug der Forschung nutzten die Heiler, um sich als Interes-sensgemeinschaft für den Erhalt der benötigten pflanzlichen Ressourcen einzusetzen.
Resumo:
Materials that can mold the flow of elastic waves of certain energy in certain directions are called phononic materials. The present thesis deals essentially with such phononic systems, which are structured in the mesoscale (<1 µm), and with their individual components. Such systems show interesting phononic properties in the hypersonic region, i.e., at frequencies in the GHz range. It is shown that colloidal systems are excellent model systems for the realization of such phononic materials. Therefore, different structures and particle architectures are investigated by Brillouin light scattering, the inelastic scattering of light by phonons.rnThe experimental part of this work is divided into three chapters: Chapter 4 is concerned with the localized mechanical waves in the individual spherical colloidal particles, i.e., with their resonance- or eigenvibrations. The investigation of these vibrations with regard to the environment of the particles, their chemical composition, and the influence of temperature on nanoscopically structured colloids allows novel insights into the physical properties of colloids at small length scales. Furthermore, some general questions concerning light scattering on such systems, in dispute so far, are convincingly addressed.rnChapter 5 is a study of the traveling of mechanical waves in colloidal systems, consisting of ordered and disordered colloids in liquid or elastic matrix. Such systems show acoustic band gaps, which can be explained geometrically (Bragg gap) or by the interaction of the acoustic band with the eigenvibrations of the individual spheres (hybridization gap).rnWhile the latter has no analogue in photonics, the presence of strong phonon scatterers, when a large elastic mismatch between the composite components exists, can largely impact phonon propagation in analogy to strong multiple light scattering systems. The former is exemplified in silica based phononic structures that opens the door to new ways of sound propagation manipulation.rnChapter 6 describes the first measurement of the elastic moduli in newly fabricated by physical vapor deposition so-called ‘stable organic glasses’. rnIn brief, this thesis explores novel phenomena in colloid-based hypersonic phononic structures, utilizing a versatile microfabrication technique along with different colloid architectures provided by material science, and applying a non-destructive optical experimental tool to record dispersion diagrams.rn
Resumo:
Die Kombination magnetischer Nanopartikel (NP) mit temperatursensitiven Polymeren führt zur Bildung neuer Komposit-Materialien mit interessanten Eigenschaften, die auf vielfältige Weise genutzt werden können. Mögliche Anwendungsgebiete liegen in der magnetischen Trennung, der selektiven Freisetzung von Medikamenten, dem Aufbau von Sensoren und Aktuatoren. Als Polymerkomponente können z.B. Hydrogele dienen. Die Geschwindigkeit der Quellgradänderung mittels externer Stimuli kann durch eine Reduzierung des Hydrogelvolumens erhöht werden, da das Quellen ein diffusionskontrollierter Prozess ist. rnIm Rahmen dieser Arbeit wurde ein durch ultraviolettes Licht vernetzbares Hydrogel aus N-isopropylacrylamid, Methacrylsäure und dem Vernetzer 4-Benzoylphenylmethacrylat hergestellt (PNIPAAm-Hydrogel) und mit magnetischen Nanopartikeln aus Magnetit (Fe3O4) kombiniert. Dabei wurde die Temperatur- und die pH-Abhängigkeit des Quellgrades im Hinblick auf die Verwendung als nanomechanische Cantilever Sensoren (NCS) untersucht. Desweiteren erfolgte eine Charakterisierung durch Oberflächenplasmonen- und optischer Wellenleitermoden-Resonanz Spektroskopie (SPR/OWS). Die daraus erhaltenen Werte für den pKa-Wert und die lower critical solution Temperatur (LCST) stimmten mit den bekannten Literaturwerten überein. Es konnte gezeigt werden, dass eine stärkere Vernetzung zu einer geringeren LCST führt. Die Ergebnisse mittels NCS wiesen zudem auf einen skin-effect während des Heizens von höher vernetzten Polymeren hin.rnDie Magnetit Nanopartikel wurden ausgehend von Eisen(II)acetylacetonat über eine Hochtemperaturreaktion synthetisiert. Durch Variation der Reaktionstemperatur konnte die Größe der hergestellten Nanopartikel zwischen 3.5 und 20 nm mit einer Größenverteilung von 0.5-2.5 nm eingestellt werden. Durch geeignete Oberflächenfunktionalisierung konnten diese in Wasser stabilisiert werden. Dazu wurde nach zwei Strategien verfahren: Zum einen wurden die Nanopartikel mittels einer Silika-Schale funktionalisiert und zum anderen Zitronensäure als Tensid eingesetzt. Wasserstabilität ist vor allem für biologische Anwendungen wünschenswert. Die magnetischen Partikel wurden mit Hilfe von Transmissionselektronenmikroskopie (TEM), und superconductive quantum interference device (SQUID) charakterisiert. Dabei wurde eine Größenabhängigkeit der magnetischen Eigenschaften sowie superparamagnetisches Verhalten beobachtet. Außerdem wurde die Wärmeerzeugung der magnetischen Nanopartikel in einem AC Magnetfeld untersucht. rnDie Kombination beider Komponenten in Form eines Ferrogels wurde durch Mischen Benzophenon funktionalisierter magnetischer Nanopartikel mit Polymer erreicht. Durch Aufschleudern (Spin-Coaten) wurden dünne Filme erzeugt und diese im Hinblick auf ihr Verhalten in einem Magnetfeld untersucht. Dabei wurde eine geringes Plastikverhalten beobachtet. Die experimentellen Ergebnisse wurden anschließend mit theoretisch berechneten Erwartungswerten verglichen und mit den unterschiedlichen Werten für dreidimensionale Ferrogele in Zusammenhang gestellt. rn
Resumo:
During the last few decades an unprecedented technological growth has been at the center of the embedded systems design paramount, with Moore’s Law being the leading factor of this trend. Today in fact an ever increasing number of cores can be integrated on the same die, marking the transition from state-of-the-art multi-core chips to the new many-core design paradigm. Despite the extraordinarily high computing power, the complexity of many-core chips opens the door to several challenges. As a result of the increased silicon density of modern Systems-on-a-Chip (SoC), the design space exploration needed to find the best design has exploded and hardware designers are in fact facing the problem of a huge design space. Virtual Platforms have always been used to enable hardware-software co-design, but today they are facing with the huge complexity of both hardware and software systems. In this thesis two different research works on Virtual Platforms are presented: the first one is intended for the hardware developer, to easily allow complex cycle accurate simulations of many-core SoCs. The second work exploits the parallel computing power of off-the-shelf General Purpose Graphics Processing Units (GPGPUs), with the goal of an increased simulation speed. The term Virtualization can be used in the context of many-core systems not only to refer to the aforementioned hardware emulation tools (Virtual Platforms), but also for two other main purposes: 1) to help the programmer to achieve the maximum possible performance of an application, by hiding the complexity of the underlying hardware. 2) to efficiently exploit the high parallel hardware of many-core chips in environments with multiple active Virtual Machines. This thesis is focused on virtualization techniques with the goal to mitigate, and overtake when possible, some of the challenges introduced by the many-core design paradigm.
Resumo:
In un sistema radar è fondamentale rilevare, riconoscere e cercare di seguire il percorso di un eventuale intruso presente in un’area di osservazione al fine ultimo della sicurezza, sia che si consideri l’ambito militare, che anche quello civile. A questo proposito sono stati fatti passi avanti notevoli nella creazione e sviluppo di sistemi di localizzazione passiva che possano rilevare un target (il quale ha come unica proprietà quella di riflettere un segnale inviato dal trasmettitore), in modo che esso sia nettamente distinto rispetto al caso di assenza dell’intruso stesso dall’area di sorveglianza. In particolare l’ultilizzo di Radar Multistatico (ossia un trasmettitore e più ricevitori) permette una maggior precisione nel controllo dell’area d’osservazione. Tra le migliori tecnologie a supporto di questa analisi vi è l’UWB (Ultra Wide-Band), che permette di sfruttare una banda molto grande con il riscontro di una precisione che può arrivare anche al centimetro per scenari in-door. L’UWB utilizza segnali ad impulso molto brevi, a banda larga e che quindi permettono una risoluzione elevata, tanto da consentire, in alcune applicazioni, di superare i muri, rimuovendo facilmente gli elementi presenti nell’ambiente, ossia il clutter. Quindi è fondamentale conoscere algoritmi che permettano la detection ed il tracking del percorso compiuto dal target nell’area. In particolare in questa tesi vengono elaborati nuovi algoritmi di Clustering del segnale ricevuto dalla riflessione sull’intruso, utilizzati al fine di migliorare la visualizzazione dello stesso in post-processing. Infine questi algoritmi sono stati anche implementati su misure sperimentali attuate tramite nodi PulsOn 410 Time Domain, al fine ultimo della rilevazione della presenza di un target nell’area di osservazione dei nodi.
Resumo:
The main objective of this study is to reveal the housing patterns in Cairo as one of the most rapidly urbanizing city in the developing world. The study outlines the evolution of the housing problem and its influencing factors in Egypt generally and in Cairo specifically. The study takes into account the political transition from the national state economy to the open door policy, the neo-liberal period and finally to the housing situation after the January 2011 Revolution. The resulting housing patterns in Cairo Governorate were identified as (1) squatter settlements, (2) semi-informal settlements, (3) deteriorated inner pockets, and (4) formal settlements. rnThe study concluded that the housing patterns in Cairo are reflecting a multifaceted problem resulting in: (1) the imbalance between the high demand for affordable housing units for low-income families and the oversupply of upper-income housing, (2) the vast expansion of informal areas both on agricultural and desert lands, (3) the deterioration of the old parts of Cairo without upgrading or appropriate replacement of the housing structure, and (4) the high vacancy rate of newly constructed apartmentsrnThe evolution and development of the current housing problem were attributed to a number of factors. These factors are demographic factors represented in the rapid growth of the population associated with urbanization under the dictates of poverty, and the progressive increase of the prices of both buildable land and building materials. The study underlined that the current pattern of population density in Cairo Governorate is a direct result of the current housing problems. Around the depopulation core of the city, a ring of relatively stable areas in terms of population density has developed. Population densification, at the expense of the depopulation core, is characterizing the peripheries of the city. The population density in relation to the built-up area was examined using Landsat-7 ETM+ image (176/039). The image was acquired on 24 August 2006 and considered as an ideal source for land cover classification in Cairo since it is compatible with the population census 2006.rnConsidering that the socio-economic setting is a driving force of change of housing demand and that it is an outcome of the accumulated housing problems, the socio-economic deprivations of the inhabitants of Cairo Governorate are analyzed. Small administrative units in Cairo are categorized into four classes based on the Socio-Economic Opportunity Index (SEOI). This index is developed by using multiple domains focusing on the economic, educational and health situation of the residential population. The results show four levels of deprivation which are consistent with the existing housing patterns. Informal areas on state owned land are included in the first category, namely, the “severely deprived” level. Ex-formal areas or deteriorated inner pockets are characterized as “deprived” urban quarters. Semi-informal areas on agricultural land concentrate in the third category of “medium deprived” settlements. Formal or planned areas are included mostly in the fourth category of the “less deprived” parts of Cairo Governorate. rnFor a better understanding of the differences and similarities among the various housing patterns, four areas based on the smallest administrative units of shiakhat were selected for a detailed study. These areas are: (1) El-Ma’desa is representing a severely deprived squatter settlement, (2) Ain el-Sira is an example for an ex-formal deprived area, (3) El-Marg el-Qibliya was selected as a typical semi-informal and medium deprived settlement, and (4) El-Nozha is representing a formal and less deprived area.rnThe analysis at shiakhat level reveals how the socio-economic characteristics and the unregulated urban growth are greatly reflected in the morphological characteristics of the housing patterns in terms of street network and types of residential buildings as well as types of housing tenure. It is also reflected in the functional characteristics in terms of land use mix and its degree of compatibility. It is concluded that the provision and accessibility to public services represents a performance measure of the dysfunctional structure dominating squatter and semi-informal settlements on one hand and ample public services and accessibility in formal areas on the other hand.rn
Resumo:
Bacteria, yeasts, and viruses are rapidly killed on metallic copper surfaces, and the term "contact killing" has been coined for this process. While the phenomenon was already known in ancient times, it is currently receiving renewed attention. This is due to the potential use of copper as an antibacterial material in health care settings. Contact killing was observed to take place at a rate of at least 7 to 8 logs per hour, and no live microorganisms were generally recovered from copper surfaces after prolonged incubation. The antimicrobial activity of copper and copper alloys is now well established, and copper has recently been registered at the U.S. Environmental Protection Agency as the first solid antimicrobial material. In several clinical studies, copper has been evaluated for use on touch surfaces, such as door handles, bathroom fixtures, or bed rails, in attempts to curb nosocomial infections. In connection to these new applications of copper, it is important to understand the mechanism of contact killing since it may bear on central issues, such as the possibility of the emergence and spread of resistant organisms, cleaning procedures, and questions of material and object engineering. Recent work has shed light on mechanistic aspects of contact killing. These findings will be reviewed here and juxtaposed with the toxicity mechanisms of ionic copper. The merit of copper as a hygienic material in hospitals and related settings will also be discussed.
Resumo:
I am truly honored to have been given the amazing opportunity to create this original piece, this powerful journey through memory and emotive exploration of the loss of childhood. How do we feel about the loss of our child-self? Could we ever get them back? How long, how deep would one have to dig in the graveyards, the playgrounds of memory, to uncover what was buried there... to un-erase what waserased? shading silhouettes of smaller ones will ultimately encourage a reconnection with the Inner Child hidden inside all of us, as well as an intimate awareness of the adult version of the self by looking back to the smaller ones. The main inspiration for this piece is then of course, Inner Child Work. Most people may not be familiar with this therapeutic exploration of childhood... It wasimportant to me then, to present this concept in an imaginative, theatrical way, as a gift to you - a comprehensive and intensely moving gift. Speaking from experience, working on my Inner Child - my little Bianca - has been the most painful, frightening, yetrewarding and powerful experience within my personal life. Some people spend their entire lives trying to love themselves, to prove themselves, or be accepted. Some are too afraid to look back to where it all began. The characters within this piece will face thatfear... in a regression from the complexities of adulthood to the confusion of adolescence, all the way back to the wonder and bliss of childhood. They will reveal memories, of both joy and pain, love and abandonment, journeying backwards through time - through memory - through a playground - back to the beginning... We will enter a world where a push of a merry-go-round spins us to games of Truth or Dare after a high school dance at 16 - or the slam of a metal fence reminds us of the door Dad slammed in our face at 9 - where the sound of chain links swings us back to scrapping our knee by the sandbox at 5 This piece will attempt to connect everyone, both cast and audience, through a universal understanding and discussion of what it means to grow up, as well as a discovery of WHY we are the way we are - how experiences or relationships from our childhood have shaped our adult lives. We will attempt to challenge your honesty and nerve by inviting you to ask questions of yourselves, your past - to remember what it's like to have the innocence and hope of a child, to engage with and discover your Inner Child, to realize when or why you left them behind, and if you want to this magical part of yourself. It is my hope that you will join us in a collective journey - gather the courage to dig up the little kid you buried so long ago...* The creation, design, choreography, and direction for shading silhouettes of smaller ones mark the culminating experience of a year-long independent study in Theatre.
Resumo:
INTRODUCTION: Guidelines for the treatment of patients in severe hypothermia and mainly in hypothermic cardiac arrest recommend the rewarming using the extracorporeal circulation (ECC). However,guidelines for the further in-hospital diagnostic and therapeutic approach of these patients, who often suffer from additional injuries—especially in avalanche casualties, are lacking. Lack of such algorithms may relevantly delay treatment and put patients at further risk. Together with a multidisciplinary team, the Emergency Department at the University Hospital in Bern, a level I trauma centre, created an algorithm for the in-hospital treatment of patients with hypothermic cardiac arrest. This algorithm primarily focuses on the decision-making process for the administration of ECC. THE BERNESE HYPOTHERMIA ALGORITHM: The major difference between the traditional approach, where all hypothermic patients are primarily admitted to the emergency centre, and our new algorithm is that hypothermic cardiac arrest patients without obvious signs of severe trauma are taken to the operating theatre without delay. Subsequently, the interdisciplinary team decides whether to rewarm the patient using ECC based on a standard clinical trauma assessment, serum potassium levels, core body temperature, sonographic examinations of the abdomen, pleural space, and pericardium, as well as a pelvic X-ray, if needed. During ECC, sonography is repeated and haemodynamic function as well as haemoglobin levels are regularly monitored. Standard radiological investigations according to the local multiple trauma protocol are performed only after ECC. Transfer to the intensive care unit, where mild therapeutic hypothermia is maintained for another 12 h, should not be delayed by additional X-rays for minor injuries. DISCUSSION: The presented algorithm is intended to facilitate in-hospital decision-making and shorten the door-to-reperfusion time for patients with hypothermic cardiac arrest. It was the result of intensive collaboration between different specialties and highlights the importance of high-quality teamwork for rare cases of severe accidental hypothermia. Information derived from the new International Hypothermia Registry will help to answer open questions and further optimize the algorithm.
Resumo:
In this days for ever, the Rwandan youth are more active in the development of music industry, the recording studio are created every day, and the number of musician is increasing from one day to another day, it is too early to get the statistic; some of the youth are dropped out their studies to develop their career of music; the question was how many of them are developing their career to become the Professional? WHY IN THESE DAYS, RWANDAN YOUTH ARE WORKING HARDLY IN THE DEVELOPMENT OF MUSIC INDUSTRY?” it was not easy for me to get the accurate answers; some questions remains in my mind like -Are they working for money-music as a job (professional)? -Are they willing to become célèbre-stars? -Is it for the entertainment/Relaxing? -Is it because they love music? -Are they escaping the problems-Music as an escape domain? -Are they exploring their free time? -Are they using the music as the way of expressing their views? Those questions require analysing each question deeply, and getting the answers from the singers and listeners of music or DJ, in order to confirm the causes of being more active in music industry for the Rwandan youth. I am not interesting to make a deep research but to analyze and I hope this article will help the students and many researchers to develop and find out the exact causes. As my aim is to open the door for the researchers, briefly let us analyze all those above questions one to one based on the main causes as the motivation of forcing the Rwandan youth to be in the industry music.
Resumo:
Determining the formation temperature of minerals using fluid inclusions is a crucial step in understanding rock-forming scenarios. Unfortunately, fluid inclusions in minerals formed at low temperature, such as gypsum, are commonly in a metastable monophase liquid state. To overcome this problem, ultra-short laser pulses can be used to induce vapor bubble nucleation, thus creating a stable two-phase fluid inclusion appropriate for subsequent measurements of the liquid-vapor homogenization temperature, T-h. In this study we evaluate the applicability of T-h data to accurately determine gypsum formation temperatures. We used fluid inclusions in synthetic gypsum crystals grown in the laboratory at different temperatures between 40 degrees C and 80 degrees C under atmospheric pressure conditions. We found an asymmetric distribution of the T-h values, which are systematically lower than the actual crystal growth temperatures, T-g; this is due to (1) the effect of surface tension on liquid-vapor homogenization, and (2) plastic deformation of the inclusion walls due to internal tensile stress occurring in the metastable state of the inclusions. Based on this understanding, we have determined growth temperatures of natural giant gypsum crystals from Naica (Mexico), yielding 47 +/- 1.5 degrees C for crystals grown in the Cave of Swords (120 m below surface) and 54.5 +/- 2 degrees C for giant crystals grown in the Cave of Crystals (290 m below surface). These results support the earlier hypothesis that the population and the size of the Naica crystals were controlled by temperature. In addition, this experimental method opens a door to determining the growth temperature of minerals forming in low-temperature environments.
Resumo:
Recent advances in tissue-engineered cartilage open the door to new clinical treatments of joint lesions. Common to all therapies with in-vitro-engineered autografts is the need for optimal fit of the construct to allow screwless implantation and optimal integration into the live joint. Computer-assisted surgery (CAS) techniques are prime candidates to ensure the required accuracy, while at the same time simplifying the procedure. A pilot study has been conducted aiming at assembling a new set of methods to support ankle joint arthroplasty using bioengineered autografts. Computer assistance allows planning of the implant shape on a computed tomography (CT) image, manufacturing the construct according to the plan, and interoperatively navigating the surgical tools for implantation. A rotational symmetric model of the joint surface was used to avoid segmentation of the CT image; new software was developed to determine the joint axis and make the implant shape parameterizable. A complete cycle of treatment from planning to operation was conducted on a human cadaveric foot, thus proving the feasibility of computer-assisted arthroplasty using bioengineered autografts
Resumo:
AIM: To investigate the outcome of primary percutaneous coronary interventions (PCI) in elderly patients (>/=>/=75 years) with ST-elevation myocardial infarction (STEMI). METHODS AND RESULTS: Between 1995 and 2003, a total of 319 consecutive patients with acute ST-elevation myocardial infarction presenting within 6-12 hr after onset of symptoms were prospectively enrolled in a registry. Of 296 patients undergoing primary PCI, 40 patients were >/=>/=75 years old (group A) and 256 patients younger than 75 years (group B). Elderly patients presented with a lower ejection fraction (49 +/- 14% vs. 53 +/- 13%, P = 0.046) and a higher number of cardiovascular risk factors. PCI success was achieved in 80% (group A) and 91% (group B, P = 0.031), respectively with comparable door-to-balloon times (87 +/- 49 and 95 +/- 79 min, P = ns). Periprocedural complications in both groups were low and major adverse cardiac events (death, myocardial infarction, target vessel revascularization and cardiac rehospitalization) after 6 months amounted to 23% (group A) and 20% (group B, P = ns), respectively. CONCLUSIONS: Clinical outcome of elderly patients (>/=>/=75 years) with acute STEMI is favorable and comparable with the middle-aged population. However, procedural success was significantly lower in elderly (80%) compared to younger patients (90%). Acute percutaneous coronary intervention appears to be safe and not associated with higher periprocedural complications, in elderly patients.