Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

FAM-MDR: a flexible family-based multifactor dimensionality reduction technique to detect epistasis using related individuals

We propose a novel multifactor dimensionality reduction method for epistasis detection in small or extended pedigrees, FAM-MDR. It combines features of the Genome-wide Rapid Association using Mixed Model And Regression approach (GRAMMAR) with Model-Based MDR (MB-MDR). We focus on continuous traits, although the method is general and can be used for outcomes of any type, including binary and censored traits. When comparing FAM-MDR with Pedigree-based Generalized MDR (PGMDR), which is a generalization of Multifactor Dimensionality Reduction (MDR) to continuous traits and related individuals, FAM-MDR was found to outperform PGMDR in terms of power, in most of the considered simulated scenarios. Additional simulations revealed that PGMDR does not appropriately deal with multiple testing and consequently gives rise to overly optimistic results. FAM-MDR adequately deals with multiple testing in epistasis screens and is in contrast rather conservative, by construction. Furthermore, simulations show that correcting for lower order (main) effects is of utmost importance when claiming epistasis. As Type 2 Diabetes Mellitus (T2DM) is a complex phenotype likely influenced by gene-gene interactions, we applied FAM-MDR to examine data on glucose area-under-the-curve (GAUC), an endophenotype of T2DM for which multiple independent genetic associations have been observed, in the Amish Family Diabetes Study (AFDS). This application reveals that FAM-MDR makes more efficient use of the available data than PGMDR and can deal with multi-generational pedigrees more easily. In conclusion, we have validated FAM-MDR and compared it to PGMDR, the current state-of-the-art MDR method for family data, using both simulations and a practical dataset. FAM-MDR is found to outperform PGMDR in that it handles the multiple testing issue more correctly, has increased power, and efficiently uses all available information.

Insights into the Design and Characteristics of the Sedimentation Process at Multi-Barrel Culverts in Iowa, TR-596, 2010

The present study is an integral part of a broader study focused on the design and implementation of self-cleaning culverts, i.e., configurations that prevent the formation of sediment deposits after culvert construction or cleaning. Sediment deposition at culverts is influenced by many factors, including the size and characteristics of material of which the channel is composed, the hydraulic characteristics generated under different hydrology events, the culvert geometry design, channel transition design, and the vegetation around the channel. The multitude of combinations produced by this set of variables makes the investigation of practical situations a complex undertaking. In addition to the considerations above, the field and analytical observations have revealed flow complexities affecting the flow and sediment transport through culverts that further increase the dimensions of the investigation. The flow complexities investigated in this study entail: flow non-uniformity in the areas of transition to and from the culvert, flow unsteadiness due to the flood wave propagation through the channel, and the asynchronous correlation between the flow and sediment hydrographs resulting from storm events. To date, the literature contains no systematic studies on sediment transport through multi-box culverts or investigations on the adverse effects of sediment deposition at culverts. Moreover, there is limited knowledge about the non-uniform, unsteady sediment transport in channels of variable geometry. Furthermore, there are few readily useable (inexpensive and practical) numerical models that can reliably simulate flow and sediment transport in such complex situations. Given the current state of knowledge, the main goal of the present study is to investigate the above flow complexities in order to provide the needed insights for a series of ongoing culvert studies. The research was phased so that field observations were conducted first to understand the culvert behavior in Iowa landscape. Modeling through complementary hydraulic model and numerical experiments was subsequently carried out to gain the practical knowledge for the development of the self-cleaning culvert designs.

GeoTools-Android: eines geogràfiques per Android

Aquest treball tracta de l'estat actual de les aplicacions sobre sistemes d'informació geogràfica per Android.

Seguiment de la diagnosi socioambiental del Camí de Cavalls: sector nord-est

El Camí de Cavalls és un element característic amb una importància històrica, cultural i recreativa considerable a Menorca. Aquesta illa va ser declarada Reserva de la Biosfera per l UNESCO l’any 1993; com a conseqüència, a l’any 2000 es va implantar el Pla Especial del Camí de Cavalls amb diversos objectius: definir les característiques del Camí i els seus instruments de gestió i aplicació; implantar mecanismes i normes que permetin l’ús públic que garanteixin la seva protecció i conservació; i finalment definir polítiques de sostenibilitat i conscienciació ambiental. Al llarg dels anys, la seva gestió ha permès que el Camí presenti una millora del seu estat de conservació i fer-ne un ús favorable a nivell socioambiental. L’any 2008 es va realitzar una diagnosi del Sector nord-est de la illa, aplicant-ne diversos indicadors per tal de determinar l’estat del Cam,í coincidint amb l’aplicació dels criteris plantejats pel Pla Especial del 2000 (Diagnosi Socioambiental del Camí de Cavalls de Menorca 2008). En aquest document s’explica la realització de la segona diagnosi, a partir del protocol dissenyat cinc anys abans, per tal de valorar l’estat actual del Camí i observar i definir les variacions que s’han produït en aquest període de temps. Els resultats mostren una tendència global positiva de millora del Camí, tal i com es planteja en la hipòtesis del projecte, tot i presentar-se una sèrie d’inconvenients a l’hora d’aplicar i valorar qualitativament els indicadors utilitzats. L’estudi s’ha realitzat amb la col·laboració dels centres de estudis ambientals de l’ICTA (Institut de Ciència i Tecnologia Ambientals) amb seu a la UAB (Universitat Autònoma de Barcelona), i l’OBSAM (Observatori Socioambiental de Menorca) amb seu a l’IME (Institut Menorquí d’Estudis).

Communicating Highway Safety: What Works, 2002

Few topics in transportation are of greater significance, now and in the future, than making today’s roads safe for those who use them. This study aims to assist the formulation of policy by examining the empirical evidence currently available on the ability of several forms of communication efforts and activities to increase knowledge about and affect attitudes and behavior toward highway safety practices. The objective of this effort is to provide a comparative synthesis of what works and what does not in highway safety campaigns across a large number of topical areas that have a mass media component. This was accomplished by conducting an extensive literature review to determine the current state of knowledge concerning what works and what has significant potential for wide use in future highway safety campaigns. An analytic framework for investigating highway safety campaigns was created. The framework includes (1) the types of media components, (2) the types of collaborations, (3) the context in which the campaign is intended to have impact, (4) the structure or procedural steps into which campaigns are organized, (5) the principles for what works in a campaign, and (6) the desired impact of a campaign on its target audience. The report reveals 25 characteristics of successful communication campaigns, strategies that stand a chance of achieving changes in knowledge, attitude, and behavior. The actual impact of mass communication remains unproven because of a perceived lag in the development of adequate evaluation techniques. Education by itself has not generally resulted in significant changes in the behaviors targeted, but education of the public and advocacy groups has often helped enact necessary legislation, transmit knowledge about the provisions and penalties of laws in ways that increase their deterrent effect, and generate public support for law enforcement programs. Even in such cases, however, when enforcement is inconsistent, public compliance frequently decreases with time. Approaches to traffic safety that emphasize the need for long-term individual- and community-based measures are found to be especially crucial for addressing complex problems like drinking and driving that are determined by a myriad of lifestyle and psychosocial factors.

Early detection of lung cancer: a statement from an expert panel of the Swiss university hospitals on lung cancer screening.

The discussion about setting up a program for lung cancer screening was launched with the publication of the results of the National Lung Screening Trial, which suggested reduced mortality in high-risk subjects undergoing CT screening. However, important questions about the benefit-harm balance and the details of a screening program and its cost-effectiveness remain unanswered. A panel of specialists in chest radiology, respiratory medicine, epidemiology, and thoracic surgery representing all Swiss university hospitals prepared this joint statement following several meetings. The panel argues that premature and uncontrolled introduction of a lung cancer screening program may cause substantial harm that may remain undetected without rigorous quality control. This position paper focuses on the requirements of running such a program with the objective of harmonizing efforts across the involved specialties and institutions and defining quality standards. The underlying statement includes information on current evidence for a reduction in mortality with lung cancer screening and the potential epidemiologic implications of such a program in Switzerland. Furthermore, requirements for lung cancer screening centers are defined, and recommendations for both the CT technique and the algorithm for lung nodule assessment are provided. In addition, related issues such as patient management, registry, and funding are addressed. Based on the current state of the knowledge, the panel concludes that lung cancer screening in Switzerland should be undertaken exclusively within a national observational study in order to provide answers to several critical questions before considering broad population-based screening for lung cancer.

Hindmilk: a head start in preterm nutrition.

BACKGROUND: During the neonatal period, nutrition has a crucial impact on preterm infants' survival, growth and development. Current nutritional practices for preterm infants often fail to meet their nutritional needs and thus have potential adverse consequences for their growth and development. Hindmilk represents a promising avenue to manage this nutritional challenge. METHOD: The scientific literature was reviewed to determine the current state of knowledge about hindmilk and its effects on the growth and development of preterm infants. RESULTS: Four studies evaluating the effects of hindmilk on the growth of preterm infants were found and included in this review. These studies report contradictory findings and present serious methodological shortcomings, limiting the evidence on the potential benefits of hindmilk in preterm infants. CONCLUSIONS: A body of knowledge on the effects of hindmilk on the growth and development of preterm infants is accumulating but there is still a striking need for further investigation.

The electricity distribution network in Saint-Petersburg area and benchmark between Saint-Petersburg and City of Stockholm related distribution companies' performance

The main objective of the Thesis is the description of the electricity distribution networks in Saint-Petersburg area and Stockholm as well. Main similarity and differences in the construction and technicalperformance are presented in the study. Present and future development and investment into the electricity distribution network of OJSC Lenenergo are viewed. The Thesis presents the overview of the power industry reform in Russia. The current state of the electricity distribution sector is described. The study views the participation of the foreign investor "Fortum Power and Heat Oy" inthe development and management of the OJSC Lenenergo. Benchmark comparison of the prices and tangible assets of the main electricity distribution companies in Saint-Petersburg and Stockholm areas is done.

Service Management for Service Desk

Palvelunhallinnan kehittäminen Service Desk ympäristöön johtaa parempaan työnkulun hallintaan. Service Deskin päätehtävänä on toimia ainoana yhteyspisteenä asiakkaalta tietohallinto-osastolle. Jokainen yhteydenottopitää kirjata ja se pitäisi olla jäljitettävissä. Tapahtumien eli insidenttien kirjaaminen tapahtuu pääasiassa Service Desk -funktiossa, joka omistaa niistä jokaisen. Tapahtumien hallintaprosessin tehtävänä on etsiä loppukäyttäjän tai IT-infrastruktuurin monitorointityökalun ilmoittamalle insidentille mahdollisimman nopea ratkaisu. Insidentit saattavat johtaa ongelmiin, jotka käsitellään erillisessä prosessissa. Ongelmien hallintaprosessi yrittää etsiä vikatilanteen pohjimmaisen syyn. Kun pohjimmaisin syy on löytynyt, prosessi lähettää muutospyynnön muutosten hallintaprosessille. Jotta päästään mahdollisimman hyvään tehokkuuteen, pitää määrittää asiakasrajapinta sekä mittarit. ITIL-malli tarjoaa prosessit IT-palvelunhallinnan kehittämiselle. Kansainvälisesti tunnettuna 'de factO' standardina sitä voidaan soveltaa globaaleissa yrityksissä. Tässä työssä keskitytään erään lääkkeiden jakelussa toimivan yrityksen tietohallinto-osaston Help Deskin nykytilan määrittämiseen. Työssä myös kuvataan tietohallinto-osaston tavoitetila, jossa keskitytään Service Deskin IT palvelunhallinnan kehittämiseen. Muut prosessit ja mittarit on kuvattu niiltä osin, jotka tulee huomioida Service Deskin seuraamisen ja ohjaamisen kannalta.

Liiketoimintaympäristön muutosten tuomat mahdollisuudet verkko-operaattoriliiketoiminnassa

Tutkimuksen tavoitteena oli selvittää millaisetmuutosvoimat muokkaavat verkko-operaattorin liiketoimintaympäristöä, millaisia skenaarioita voidaan muodostaa tulevaisuuden liiketoimintaympäristöstä ja millaisia mahdollisuuksia verkko-operaattorille tulevaisuudessa avautuu. Tarkasteluun on otettu mukaan sekä kiinteän että matkaviestinverkon liiketoiminta ja tutkimuson rajattu koskemaan vain Suomen markkinoita. Tarkastelu tehdään verkko-operaattorin näkökulmasta ja se ulottuu viiden vuoden päähän. Operaattoriliiketoiminnan ja toimintaympäristön nykytilaa ja kehitystä tarkasteltiin uutisten, aiempien julkaisujen ja tutkimusten pohjalta. Tämän ja skenaariotyöryhmän mielipiteiden avulla tunnistettiin ne muuttujat, joiden katsottiin muokkaavan liiketoimintaympäristöä. Muuttujien avulla luotiin kolme skenaarioluonnosta, joita täydennettiin työryhmän toimesta. Lopullisten skenaarioiden teemat ovat "Oman palveluoperaattorin ehdoilla", "Kaksintaistelu" ja "Markkinoiden ehdoilla". Lopullisten skenaarioiden jälkeen pyrittiin tunnistamaan liiketoimintamahdollisuuksia, joita tulevaisuudessa avautuu.

Hitsausmenetelmät ja niiden kehittämismahdollisuudet painelaitteiden valmistuksessa

Työn tavoitteena oli painelaitteiden hitsaustuotannon kehittäminen. Keinoina olivat käytössä olevien hitsausprosessienkehittäminen tai niiden käytön tehostaminen ja mahdollisesti muiden hitsausprosessien, kuten plasma-, laser- tai hybridihitsauksen, käyttöönotto. Työn teoriaosassa käsiteltiin painelaitteiden valmistuksessa käytettävät hitsausprosessit ja niiden kehittämiskeinot, hitsauskustannuksen muodostuminen sekä miten näihin kustannuksiin voidaan vaikuttaa. Lisäksi tarkasteltiin painelaitteiden valmistuksessa käytettävien materiaalien hitsattavuutta ja laadunvarmistusta. Tutkimusosuudessa käytiin läpi valmistuksen nykytila ja tehtiin tuotannon analysointi kehittämiskohteeksi valitulle lämmönsiirtimelle. Kehitysehdotuksenatuotannon tehostamiseksi ehdotettiin MAG-täytelanka- ja jauhekaarihitsauksen käytön lisäämistä. Lisäksi ehdotettiin juurituen käyttöä ja hitsauksen mekanisoinnin lisäämistä. Plasma- tai hybridihitsauksen käytöllä todettiin pystyttävän lyhentämään läpimenoaikoja. Ennen laitteistohankintojen tekoa täytyy tehdä lisäselvityksiä soveltuvuuden ja kannattavuuden varmistamiseksi.

Virtuaalitilan suunnitteluja toteutus nuorisotyön tueksi

Tämän diplomityön tarkoituksena on suunnitella ja toteuttaa nuorisotyön tarpeisiin soveltuva virtuaalitila, jossanuoret voivat keskustella ongelmistaan oikean nuorisotyöntekijän kanssa. Ensin tutkitaan olemassa olevien virtuaalimaailmojen nykyistä tilaa, sekä luodaan katsaus virtuaalisuuteen ja mallintamiseen liittyviin perustekniikoihin. Olemassa olevien virtuaalimaailmojen ja niiden ominaisuuksien pohjalta suunnitellaan uusi, täysin nuorten auttamiseen tarkoitettu virtuaalitila. Tämän työn tarkoituksena ei ole tutkia nuorten auttamisen sosiaalista problematiikkaa, vaan tekniikoita, joilla auttaminen tehdään mahdolliseksi. Työn käytännöllisenä osuutena toteutettiin suunniteltu monen käyttäjän virtuaalitila, jossa käyttäjät voivat kommunikoida keskenään, keskustella nuorisotyöntekijän kanssa tai pelata ajanvietteeksi tarkoitettua junapeliä. Virtuaalitilan toteutuksessa käytettiin hyödyksi kolmiulotteista mallinnusta, Lingo-skriptikieltä, sekä Macromedian tarjoamaa monen käyttäjän palvelinta. Kaikki toteutetut osat koottiin yhdeksi sovellukseksi, joka julkaistiin Shockwave-elokuvana www-sivustolla.

Business Intelligence -järjestelmä päätöksentekijöiden tukena asiantuntijayrityksessä

Työn tarkoituksena oli kartoittaa ja tehdä esiselvitys Business Intelligencen(BI) mahdollisuuksista tiedon hallinnassa. Tavoitteena oli selvittää, kuinka yritys voi tietotekniikan avulla paremmin hyödyntää operatiivisten järjestelmien tuottamia tietoja päätöksenteon tukena. Työssä sovellettiin konstruktiivista tutkimusotetta. Business Intelligence -teknologiaan tutustuttiin aluksi kirjallisuuden avulla. Ongelmaa lähestyttiin selvittämällä kohdeyrityksen tiedonhallinnan nykytila ja siihen liittyvät ongelmat. Käyttäjävaatimukset selvitettiin strukturoidulla kyselytutkimuksella. Lisäksi työn empiriaosuudessa tutustuttiin kahteen Business Intelligence -toteutukseen ja arvioitiin teknologian kypsyyttä suhteessa asiakasvaatimuksiin. Tiedonhallinnalta toivottiin joustavuutta ja helppokäyttöisyyttä.Erityisesti tutkimuksessa esiin nousi se, että tiedon jakeluun tarvitaan monipuolisempia vaihtoehtoja. Käyttäjät olivat valmiita hyödyntämään uusia BI-ominaisuuksia varsin laajalti. Haastavinta tutkimuksessa oli liiketoiminnan ymmärtäminen. Suurimmat BI-teknologian puutteet havaittiin loppukäyttäjän sovelluksissa. Tietovarastointiprosessiin liittyvä teknologia todettiin toimivaksi.

Myymäläketjun hankintatoiminnan mittarit, Case Tiimari Oyj

Työn tavoitteena oli kehittää yritykselle selkeä ja toimiva hankintatoiminnan suorituskykymittaristo, jonka avulla tietojärjestelmien tuottama tietosaadaan hyötykäyttöön. Tavoitteena oli myös selvittää yrityksen hankintatoiminnan nykytila. Selvitys auttoi sopivien mittareiden valinnassa. Teoriaosassa käsiteltiin suorituskyvyn mittaamista hankintatoiminnassa, mittariston suunnittelua ja käyttöönoton vaiheita sekä erilaisia malliratkaisuja hankintatoiminnan suorituskyvyn mittaamiselle. Empiirisessä osassa perehdyttiin yrityksen hankintatoiminnan nykytilaan sekä rakennettiin teorian, nykytila-analyysin ja hankintahenkilökunnan näkemysten pohjalta suorituskykymittaristo yrityksen osto-osastolle. Hankintatoiminnan nykytilanteen arvioinnissa korostuivat parhaillaan tapahtuvat suuret muutokset. Suorituskykymittaristo laadittiin siten, että se kattaa tärkeimmät osa-alueet myymäläketjun hankintatoiminnassa. Työn tuloksena kehitetty mittaristo koostuu toimittaja-, valikoima-, materiaalivirta- sekä varastomittareista.