Assessment of the DIXTAL DX-2710 Automated Oscillometric Device for Blood Pressure Measurement with the Validation Protocols of the British Hypertension Society (BHS) and the Association for the Advancement of Medical Instrumentation (AAMI)

OBJECTIVE: To assess the Dixtal DX2710 automated oscillometric device used for blood pressure measurement according to the protocols of the BHS and the AAMI. METHODS: Three blood pressure measurements were taken in 94 patients (53 females 15 to 80 years). The measurements were taken randomly by 2 observers trained to measure blood pressure with a mercury column device connected with an automated device. The device was classified according to the protocols of the BHS and AAMI. RESULT: The mean of blood pressure levels obtained by the observers was 148±38/93±25 mmHg and that obtained with the device was 148±37/89±26 mmHg. Considering the differences between the measurements obtained by the observer and those obtained with the automated device according to the criteria of the BHS, the following classification was adopted: "A" for systolic pressure (69% of the differences < 5; 90% < 10; and 97% < 15 mmHg); and "B" for diastolic pressure (63% of the differences < 5; 83% < 10; and 93% < 15 mmHg). The mean and standard deviation of the differences were 0±6.27 mmHg for systolic pressure and 3.82±6.21 mmHg for diastolic pressure. CONCLUSION: The Dixtal DX2710 device was approved according to the international recommendations.

Assessment of the techniques of blood pressure measurement by health professionals

OBJECTIVE: To assess blood pressure measurement by health professionals of a public hospital in São Paulo State. METHODS: Semi-structured interviews and direct observation were performed with a verification list according to the criteria reported by Perloff et al. One hundred and five health professionals took part in the study. After measuring blood pressure, the level of concordance between the way the procedure was performed and the recommended one was assessed. RESULTS: Nurses and nurse's aides abided by 40% of the recommended procedures for adequate blood pressure measurement. The other categories of health professionals (nursing and medicine teachers, physicians, residents, and nursing students) abided by approximately 70%. CONCLUSION: Permanent educational activities aiming at standardizing blood pressure measurement should be implemented among the different categories of health professionals.

Avaliação sensoriomotora do complexo articular do ombro : validação de um protocolo

Introdução: São escassas as medidas objetivas, válidas e consistentes da função sensoriomotora do complexo articular do ombro (CAO). Objetivos: desenvolvimento e validação de um protocolo de avaliação sensoriomotora do CAO. Materiais e métodos: 40 Sujeitos (16 atletas e 24 não atletas) completaram 6 momentos de teste, 3 por cada um de 2 investigadores. Em cada momento avaliou-se a NPA pelo Biodex System 3, na elevação do braço no plano da omoplata a 80º e 160º, e na rotação externa (RE) a 45º e 80º , bem como o controlo postural do CAO avaliou-se pela plataforma Rsscan. Resultados/Discussão: Todas as variáveis apresentaram estabilidade temporal, exceto os erros a 80º na RE (p=0,021) e 80º no PO (p=0,006), nos atletas, para o Investigador 1, e as componentes do CP nos não atletas, para o investigador 2. Os ICC’s foram globalmente baixos, apresentando valores moderados no grupo de não atletas, para o Investigador 2, no comprimento (0,862) e velocidade média do CP (0,852). Excluindo a área do CP no grupo de não atletas (p=0,030), não houve diferenças significativas nas médias entre observadores. Verificaram-se correlações fortes entre as componentes do CP, mas não ocorreram correlações fortes entre estas e as da NPA. Conclusões: Os resultados poucos consistentes, não permitem retirar conclusões sólidas, impossibilitando assumir o protocolo como fiável e válido na avaliação sensoriomotora do CAO.

Modelo integrado de cuantificación del nivel de significación y de asignación del error tolerable en procesos de auditoría de estados contables

El objetivo que persigue un proceso de auditoría de estados contables es la comunicación por parte del auditor de una conclusión en relación al grado de razonabilidad con que tales estados reflejan la situación patrimonial, económica y financiera del ente de acuerdo a los criterios plasmados en las normas contables de referencia a ser utilizadas. El hecho que un auditor emita una conclusión errónea como consecuencia de su labor puede implicar la asunción de responsabilidades profesionales, civiles y penales como consecuencia de reclamos de usuarios de los estados contables que pudieran haberse visto perjudicados como consecuencia de la emisión de la conclusión errónea. Las normas contables a nivel nacional e internacional admiten la existencia de errores u omisiones en la información contenida en los estados contables, en la medida que tales desvíos no provoquen en los usuarios interesados en tales estados una decisión distinta a la que tomarían en caso de no existir los errores u omisiones aludidos. De lo expuesto en el párrafo anterior surge la cabal importancia que la determinación del nivel de significación total (nivel de desvíos admitidos por los usuarios de los estados contables en la información por ellos contenida) adquiere en los procesos de auditoría, como así también la asignación de tal nivel entre los distintos componentes de los estados contables (asignación del error tolerable) a los efectos de que los auditores eviten asumir responsabilidades de índole profesional, civil y/o penal. Hasta el momento no se conoce la existencia de modelos matemáticos que respalden de modo objetivo y verificable el cálculo del nivel de significación total y la asignación del error tolerable entre los distintos elementos conformantes de los estados contables. Entendemos que el desarrollo e integración de un modelo de cuantificación del nivel de significación total y de asignación del error tolerable tiene las siguientes repercusiones: 1 – Representaría para el auditor un elemento que respalde el modo de cuantificación del nivel de significación y la asignación del error tolerable entre los componentes de los estados contables. 2 – Permitiría que los auditores reduzcan las posibilidades de asumir responsabilidades de carácter profesional, civil y/o penales como consecuencia de su labor. 3 – Representaría un principio de avance a los efectos de que los organismos emisores de normas de auditoría a nivel nacional e internacional recepten elementos a los efectos de fijar directrices en relación al cálculo del nivel de significación y de asignación del error tolerable. 4 - Eliminaría al cálculo del nivel de significación como una barrera que afecte la comparabilidad de los estados contables.

SMPI model : a stepwise process model to facilitate software measurement process improvement along the measurement paradigms

Software engineering, software measurement, software process engineering, capability, maturity

Theory and measurement of social intelligence as a cognitive performance construct

Social intelligence

Non-classical error bounds in the central limit theorem

The classical central limit theorem states the uniform convergence of the distribution functions of the standardized sums of independent and identically distributed square integrable real-valued random variables to the standard normal distribution function. While first versions of the central limit theorem are already due to Moivre (1730) and Laplace (1812), a systematic study of this topic started at the beginning of the last century with the fundamental work of Lyapunov (1900, 1901). Meanwhile, extensions of the central limit theorem are available for a multitude of settings. This includes, e.g., Banach space valued random variables as well as substantial relaxations of the assumptions of independence and identical distributions. Furthermore, explicit error bounds are established and asymptotic expansions are employed to obtain better approximations. Classical error estimates like the famous bound of Berry and Esseen are stated in terms of absolute moments of the random summands and therefore do not reflect a potential closeness of the distributions of the single random summands to a normal distribution. Non-classical approaches take this issue into account by providing error estimates based on, e.g., pseudomoments. The latter field of investigation was initiated by work of Zolotarev in the 1960's and is still in its infancy compared to the development of the classical theory. For example, non-classical error bounds for asymptotic expansions seem not to be available up to now ...

Framework for a service-oriented measurement infrastructure

Magdeburg, Univ., Fak. für Informatik, Diss., 2009

Framework of quality measurement in CASE tool based software development

Magdeburg, Univ., Fak. für Informatik, Diss., 2010

Disposable, micro-fluidic biosensor array for online analysis of adherent cells activity combining quartz crystal resonators and impedance measurement techniques

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2011

Model-based measurement and control of fluidised bed spray granulation processes

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2012

A comparative analysis of Cobb-Douglas model with additive and multiplicative error

This paper dis cusses the fitting of a Cobb-Doug las response curve Yi = αXβi, with additive error, Yi = αXβi + e i, instead of the usual multiplicative error Yi = αXβi (1 + e i). The estimation of the parameters A and B is discussed. An example is given with use of both types of error.

Stability and error analysis for a numerical scheme to approximate elastic flow

Otto-von-Guericke-Universität Magdeburg, Fakultät für Mathematik, Univ., Dissertation, 2015

Absolute and relative deprivation and the measurement of poverty

This paper develops the link between poverty and inequality by focussing on a class of poverty indices (some of them well-known) which aggregate normative concerns for absolute and relative deprivation. The indices are distinguished by a parameter that captures the ethical sensitivity of poverty measurement to ``exclusion'' or ``relative-deprivation'' aversion. We also show how the indices can be readily used to predict the impact of growth on poverty. An illustration using LIS data finds that he United States show more relative deprivation than Denmark and Belgium whatever the percentiles considered, but that overall deprivation comparisons of the four countries considered will generally necessarily depend on the intensity of the ethical concern for relative deprivation. The impact of growth on poverty is also seen to depend on the presence of and on the attention granted to concerns over relative deprivation. }

Regional income inequalities in Europe: an updated measurement and some decomposition results

In this paper well-known summary inequality indexes are used to explore interregional income inequalities in Europe. In particular, we mainly employ Theils’population-weighted index because of its appealing properties. Two decomposition analysis are applied. First, regional inequalities are decomposed by regional subgroups (countries). Second, intertemporal inequality changes are separated into income and population changes. The main results can be summarized as follows. First, data confirm a reduction in crossregional inequality during 1982-97. Second, this reduction is basically due to real convergence among countries. Third, currently the greater part of European interregional disparities is within-country by nature, which introduce an important challenge for the European policy. Fourth, inequality changes are due mainly to income variations, population changes playing a minor role.