G+: Enhanced Traffic Grooming in WDM Mesh Networks using Lighttours

In this article, a new technique for grooming low-speed traffic demands into high-speed optical routes is proposed. This enhancement allows a transparent wavelength-routing switch (WRS) to aggregate traffic en route over existing optical routes without incurring expensive optical-electrical-optical (OEO) conversions. This implies that: a) an optical route may be considered as having more than one ingress node (all inline) and, b) traffic demands can partially use optical routes to reach their destination. The proposed optical routes are named "lighttours" since the traffic originating from different sources can be forwarded together in a single optical route, i.e., as taking a "tour" over different sources towards the same destination. The possibility of creating lighttours is the consequence of a novel WRS architecture proposed in this article, named "enhanced grooming" (G+). The ability to groom more traffic in the middle of a lighttour is achieved with the support of a simple optical device named lambda-monitor (previously introduced in the RingO project). In this article, we present the new WRS architecture and its advantages. To compare the advantages of lighttours with respect to classical lightpaths, an integer linear programming (ILP) model is proposed for the well-known multilayer problem: traffic grooming, routing and wavelength assignment The ILP model may be used for several objectives. However, this article focuses on two objectives: maximizing the network throughput, and minimizing the number of optical-electro-optical conversions used. Experiments show that G+ can route all the traffic using only half of the total OEO conversions needed by classical grooming. An heuristic is also proposed, aiming at achieving near optimal results in polynomial time

Identificación de factores de riesgo asociados a fatiga en personal de enfermería en una clínica del sector privado de la ciudad de Bogotá, Colombia

La fatiga asociada a la carga de trabajo impuesta en trabajadores del sector salud es un factor directamente relacionado con el nivel de desempeño del trabajador y por lo tanto de la seguridad del paciente. El objetivo del presente estudio es realizar una evaluación multidimensional de la fatiga laboral percibida del personal de enfermería de una Institución Prestadora de Servicios de Salud (IPS) de IV nivel la ciudad de Bogotá. Para la valoración de fatiga se aplicó la versión en español del Inventario Sueco de Fatiga Ocupacional (SOFI-S) acompañado de preguntas abstraídas de la batería de riesgo psicosocial del Ministerio de la Protección Social y un cuestionario demográfico. Se encuestaron 60 enfermeras (3,3% hombres, 96,7% mujeres). Los principales factores asociados a la generación de fatiga son las horas de sueño, el turno y las actividades del hogar. La agrupación factorial genera 4 dimensiones de fatiga y no 5 como comúnmente se agrupa el cuestionario SOFI.

Identificación y descripción de las características de un líder global

El liderazgo ha sido definido de diferentes maneras por cientos de autores debido al contexto en el que estudian este concepto. Ninguna de estas definiciones es errónea pero algunas han tomado mayor importancia debido a los diferentes factores que enfrenta la sociedad. Desde hace unos años los países se han abierto a diferentes mercados lo cual les ha permitido eliminar las barreras políticas, económicas y culturales existentes. Esto ha llevado a que los líderes deban evaluar la nueva forma de dirigir y direccionar las organizaciones. Este es tan solo uno de los ejemplos que han llevado a modificar el concepto de liderazgo, añadiendo los nuevos retos a los que se ven enfrentados los líderes. En este trabajo de grado se estudia el que se considera uno de los mayores retos de los siglos XX y XXI: la globalización. Este fenómeno ha acercado al mundo a través del intercambio de información, de bienes, de servicios, de conocimientos y sobre todo de cultura. Esto se ha logrado a través de nuevas tecnologías, nuevos servicios de comunicación y transporte, de la ciencia y los avances de la industria. El nuevo líder debe romper la barrera nacional y abrirse a mercados extranjeros, para esto debe contar con ciertas características que le permitirán entender los diferentes mercados y a las personas que se encuentran en este. En este trabajo se identifican las que se consideran las principales características de un líder global; estas son el resultado de la investigación de diferentes autores y estudios.

Análisis de la relación entre la accidentalidad y el incremento de trabajo en un proyecto de la construcción en Colombia durante los años 2012 y 2013

La construcción es una de las industrias que mayores accidentes laborales genera, en esta investigación se realizó un análisis retrospectivo para determinar si existe alguna relación entre la ocurrencia de accidentes y la fecha de entrega de una meta, debido al incremento en la cantidad de trabajo expresado por la cantidad de días y horas extras trabajados, se cuenta con información de la accidentalidad de cinco empresas constructoras de un gran proyecto vial en Colombia en los años de 2012 y 2013. Se analizó la información correspondiente a la nómina de las mismas empresas, con el valor de la nómina mensual, el valor de las incapacidades mensuales y la cantidad de trabajadores por cada empresa en cada periodo. El manejo de los datos se hizo con EXCEL y el análisis estadístico con STATA 11.1, se usó la correlación de Spearman para encontrar la relación entre la cantidad de accidentes acumulados y: la cantidad acumulada de días trabajados en cada mes, la cantidad acumulada de horas extras trabajadas mensualmente y el costo acumulado en porcentaje de la nómina mensual, encontrándose en todos los casos una relación lineal. Por otra parte, se realizó una prueba binomial para establecer la relación de la fecha de entrega de la meta con la accidentalidad 30 días antes y después, encontrando que la accidentalidad aumenta en la proximidad previa a la entrega de la meta

A Monte Carlo method for accelerating the computation of animated radiosity sequences

Realistic rendering animation is known to be an expensive processing task when physically-based global illumination methods are used in order to improve illumination details. This paper presents an acceleration technique to compute animations in radiosity environments. The technique is based on an interpolated approach that exploits temporal coherence in radiosity. A fast global Monte Carlo pre-processing step is introduced to the whole computation of the animated sequence to select important frames. These are fully computed and used as a base for the interpolation of all the sequence. The approach is completely view-independent. Once the illumination is computed, it can be visualized by any animated camera. Results present significant high speed-ups showing that the technique could be an interesting alternative to deterministic methods for computing non-interactive radiosity animations for moderately complex scenarios

Stability lobes diagram identification and surface roughness monitoring in milling processes

La millora de la productivitat i la qualitat són indubtablement dues de les principals exigències del sector productiu modern i factors clau per la competitivitat i la supervivència. Dins aquest sector,la fabricació per arrancada de material juga encara avui en dia un paper protagonista tot i l'aparició de noves tècniques de conformat per addició.Indústries com l'aeronàutica, l'automobilística,la del motlle o l'energètica, depenen en bona part de les prestacions de les màquines-eina. Aquesta Tesi aborda dos aspectes rellevants quan es tracta de millorar de la productivitat i la qualitat del sector productiu: el problema del fimbrament, més conegut per la denominació anglosaxona chatter,i la monitorització de la rugositat superficial en el mecanitzat a alta velocitat.

Les grans infrastructures de transport i el desenvolupament de la ciutat mitjana. El Tren d'Alta Velocitat a les ciutats de Lleida, Avinyó i Novara

L'objectiu central de la tesi és estudiar els processos que permeten aconseguir un desenvolupament local a llarg termini de les ciutats mitjanes a partir de la implantació d'una gran infrastructura com el Tren d'Alta Velocitat (TAV). Es parteix de la hipòtesi que el desenvolupament local urbà a partir del TAV depèn de factors objectius i de factors subjectius (dels subjectes), uns factors que prenen una forma particular en el desenvolupament de les ciutats mitjanes. La tesi es divideix en una primera part teòrica i segona de més aplicada. Diversos autors han arribat a la conclusió que la relació tradicional que s'ha donat entre les infrastructures de transport i territori parteix d'uns paradigmes deterministes, que s'exemplifiquen amb una relació de "causa-efecte". Per aquest motiu, s'han criticat els estudis sobre els efectes socioeconòmics de les infrastructures de transport, així com el mateix concepte d'"efecte". Aquesta crítica es repeteix els estudis sobre el TAV i les ciutats mitjanes, que arriben a la conclusió que el desenvolupament econòmic no és un fet automàtic i que no es poden predir les conseqüències a mig i llarg termini del TAV. El desenvolupament local a partir del TAV, doncs, estaria relacionat amb tres elements principals. En primer lloc, entendre que la ciutat -i el territori- és un fenomen complex i, com a tal, cal abordar-lo des de la teoria dels sistemes complexos. En segon lloc, la gran infrastructura ha de convertir-se en un recurs endogen (interconnexió amb la xarxa local d'actors i territorialització en el milieu de la ciutat) per a que pugui contribuir al desenvolupament. En tercer lloc, la dinàmica de governance dels actors és primordial, i es divideix en la gestió interna de la xarxa local (projecte local) i la gestió multinivell de les administracions. En base als referents teòrics, es construeix una metodologia per avaluar el grau de desenvolupament local que ha comportat el TAV en tres ciutats mitjanes de l'arc mediterrani europeu, Lleida, Avinyó i Novara, situades respectivament a Espanya, França i Itàlia. La metodologia preveu l'estudi d'aspectes tècnics de la ciutat com els de transport (Posició territorial de la ciutat a partir del TAV, Característiques de l'estació TAV), urbanístics (Model urbanístic a escala municipal/urbana, Model urbanístic a escala de l'estació) i econòmics (Diferents projectes econòmics de la ciutat relacionats amb el TAV). També preveu l'estudi d'aspectes organitzatius externs (Els agents supralocals i els seus projectes, Grau de conflictivitat i cooperació en les relacions dels agents locals i supralocals) i interns (Capacitat de creació d'un projecte de ciutat a partir del TAV, Agents que participen en el projecte local i la seva dinàmica, Àmbit territorial dels projectes). Finalment s'efectua una avaluació del procés i dels resultats del desenvolupament local. Com a conclusió es demostra que el procés de desenvolupament local a partir de les grans infrastructures de transport depèn, en bon part, de la capacitat de governance. Depèn, per un cantó, de la capacitat dels agents locals d'elaborar un projecte de desenvolupament i liderar unes estratègies d'aprofitament i, de l'altre, de la capacitat dels agents del territori (estatals, regionals, locals) de crear aliances i cooperació per planificar la infrastructura de transport. Finalment es presenten un seguit de recomanacions a les ciutats que volen planificar l'arribada del TAV per a que contribueixi a un desenvolupament amb les característiques d'eficàcia, sostenibilitat, productivitat i equitat.

Emotion recognition in multiple sclerosis

The effect of multiple sclerosis (MS) on the ability to identify emotional expressions in faces was investigated, and possible associations with patients’ characteristics were explored. 56 non-demented MS patients and 56 healthy subjects (HS) with similar demographic characteristics performed an emotion recognition task (ERT), the Benton Facial Recognition Test (BFRT), and answered the Hospital Anxiety and Depression Scale (HADS). Additionally, MS patients underwent a neurological examination and a comprehensive neuropsychological evaluation. The ERT consisted of 42 pictures of faces (depicting anger, disgust, fear, happiness, sadness, surprise and neutral expressions) from the NimStim set. An iViewX high-speed eye tracker was used to record eye movements during ERT. The fixation times were calculated for two regions of interest (i.e., eyes and rest of the face). No significant differences were found between MS and HC on ERT’s behavioral and oculomotor measures. Bivariate and multiple regression analyses revealed significant associations between ERT’s behavioral performance and demographic, clinical, psychopathological, and cognitive measures.

Time-multiplexed Laguerre-Gaussian holographic optical tweezers for biological applications

A ferroelectric liquid crystal spatial light modulator is used to generate up to 24 independently controllable traps in a holographic optical tweezers system using time-multiplexed Fresnel zone plates. For use in biological applications, helical zone plates are used to generate Laguerre-Gaussian laser modes. The high speed switching of the ferroelectric device together with recent advances in computer technology enable fast, smooth movement of traps that can be independently controlled in real time. This is demonstrated by the trapping and manipulation of yeast cells and fungal spores. (c) 2006 Optical Society of America.

MALDI MS

Matrix-assisted laser desorption/ionization (MALDI) is a key technique in mass spectrometry (MS)-based proteomics. MALDI MS is extremely sensitive, easy-to-apply, and relatively tolerant to contaminants. Its high-speed data acquisition and large-scale, off-line sample preparation has made it once again the focus for high-throughput proteomic analyses. These and other unique properties of MALDI offer new possibilities in applications such as rapid molecular profiling and imaging by MS. Proteomics and its employment in Systems Biology and other areas that require sensitive and high-throughput bioanalytical techniques greatly depend on these methodologies. This chapter provides a basic introduction to the MALDI methodology and its general application in proteomic research. It describes the basic MALDI sample preparation steps and two easy-to-follow examples for protein identification including extensive notes on these topics with practical tips that are often not available in the Subheadings 2 and 3 of research articles.

Determination of digesta flow entering the omasal canal of dairy cows using different marker systems

Four studies were conducted to compare the effect of four indigestible markers (LiCoEDTA, Yb-acetate, Cr-mordanted straw and indigestible neutral-detergent fibre (INDF)) and three marker systems on the flow of digesta entering the omasal canal of lactating dairy cows. Samples of digesta aspirated from the omasal canal were pooled and separated using filtration and high-speed centrifugation into three fractions defined as the liquid phase, small particulate and large particulate matter. Co was primarily associated with the liquid phase, Yb was concentrated in small particulate matter, whilst Cr and INDF were associated with large particles. Digesta flow was calculated based on single markers or using the reconstitution system based on combinations of two (Co + Yb, Co + Cr and Co + INDF) or three markers (Co + Yb + Cr and Co + Yb + INDF). Use of single markers resulted in large differences between estimates of organic matter (OM) flow entering the omasal canal suggesting that samples were not representative of true digesta. Digesta appeared to consist of at least three phases that tended to separate during sampling. OM was concentrated in particulate matter, whilst the liquid phase consisted mainly of volatile fatty acids and inorganic matter. Yb was intimately associated with nitrogenous compounds, whereas Cr and INDF were concentrated in fibrous material. Current data indicated that marker systems based on Yb in combination with Cr or INDF are required for the accurate determination of OM, N and neutral-detergent fibre flow. In cases where the flow of water-soluble nutrients entering the omasal canal is also required, the marker system should also include Co.

Fractal quantization

A Fractal Quantizer is proposed that replaces the expensive division operation for the computation of scalar quantization by more modest and available multiplication, addition and shift operations. Although the proposed method is iterative in nature, simulations prove a virtually undetectable distortion to the naked eve for JPEG compressed images using a single iteration. The method requires a change to the usual tables used in JPEG algorithins but of similar size. For practical purposes, performing quantization is reduced to a multiplication plus addition operation easily programmed in either low-end embedded processors and suitable for efficient and very high speed implementation in ASIC or FPGA hardware. FPGA hardware implementation shows up to x15 area-time savingscompared to standars solutions for devices with dedicated multipliers. The method can be also immediately extended to perform adaptive quantization(1).

Efficient FPGA-based regular expression pattern matching

An approach to the automatic generation of efficient Field Programmable Gate Arrays (FPGAs) circuits for the Regular Expression-based (RegEx) Pattern Matching problems is presented. Using a novel design strategy, as proposed, circuits that are highly area-and-time-efficient can be automatically generated for arbitrary sets of regular expressions. This makes the technique suitable for applications that must handle very large sets of patterns at high speed, such as in the network security and intrusion detection application domains. We have combined several existing techniques to optimise our solution for such domains and proposed the way the whole process of dynamic generation of FPGAs for RegEX pattern matching could be automated efficiently.

A modular head/eye platform for real-time reactive vision

This paper describes the design, implementation and testing of a high speed controlled stereo “head/eye” platform which facilitates the rapid redirection of gaze in response to visual input. It details the mechanical device, which is based around geared DC motors, and describes hardware aspects of the controller and vision system, which are implemented on a reconfigurable network of general purpose parallel processors. The servo-controller is described in detail and higher level gaze and vision constructs outlined. The paper gives performance figures gained both from mechanical tests on the platform alone, and from closed loop tests on the entire system using visual feedback from a feature detector.

The distribution of solar wind speeds during solar minimum: calibration for numerical solar wind modeling constraints on the source of the slow solar wind

It took the solar polar passage of Ulysses in the early 1990s to establish the global structure of the solar wind speed during solar minimum. However, it remains unclear if the solar wind is composed of two distinct populations of solar wind from different sources (e.g., closed loops which open up to produce the slow solar wind) or if the fast and slow solar wind rely on the superradial expansion of the magnetic field to account for the observed solar wind speed variation. We investigate the solar wind in the inner corona using the Wang-Sheeley-Arge (WSA) coronal model incorporating a new empirical magnetic topology–velocity relationship calibrated for use at 0.1 AU. In this study the empirical solar wind speed relationship was determined by using Helios perihelion observations, along with results from Riley et al. (2003) and Schwadron et al. (2005) as constraints. The new relationship was tested by using it to drive the ENLIL 3-D MHD solar wind model and obtain solar wind parameters at Earth (1.0 AU) and Ulysses (1.4 AU). The improvements in speed, its variability, and the occurrence of high-speed enhancements provide confidence that the new velocity relationship better determines the solar wind speed in the outer corona (0.1 AU). An analysis of this improved velocity field within the WSA model suggests the existence of two distinct mechanisms of the solar wind generation, one for fast and one for slow solar wind, implying that a combination of present theories may be necessary to explain solar wind observations.