Industry-government collaboration : Queensland's IT&T Strategy and the Information Industries Board

This paper presents a field study of the Queensland Information Technology and Telecommunications Industry Strategy (QITIS), and of the Information Industries Board (IIB), a joint industry-state government body established in 1992 to oversee the implementation of that strategy for the development of the IT&T Industry in Queensland. The aim of the study was to analyse differing stakeholder perspectives on the strategy and on its implementation by the IIB. The study forms part of a longer-term review which aims to develop methodologies for the selection of appropriate strategies for the IT&T Industry, and for the evaluation of outcomes of strategy.

Geo-economics and considerations on the tourism industry with emphasis on historical cities tourism and ecotourism in Iran

Considering its many potentials in the tourism industry, Iran has constantly been among the leading countries seeking development in this industry. Iran is a country with many attractions in different tourism sections including cultural, urban, and monument tourism, and ancient places as well as ecotourism, and water tourism etc. for tourists. However, Iran has never economically prospered regarding its potentials in this industry as compared to its rivals. Thus, the main objective of this work is to list the main necessities of harnessing economic power and required instruments to fulfill this goal. In addition, the tourism industry is discussed as an important strategy for reaching this power, and the Iranian wildlife is introduced as an intact environment. It is also discussed that what economic benefits are obtained through using this tourism industry. It must be noted that the main emphasis of this work is on urban, monument tourism, ancient places, and ecotourism as a case study in two Iranian provinces. Finally, the required analyses are performed considering the affinity between these two sections and two provinces. Results indicated that while Iran having the highest percent of growth compared to the two other countries active in this area, however this advantage has not significantly affected the GDP in Iran, and Iran has not been able to improve its geo-economic capacity in this area.

Tourism advertisement management and effective tools in tourism industry

The definition of tourism “is the travel for recreational, leisure, family or business purposes, usually of a limited duration. Tourism is commonly associated with trans-national travel, but may also refer to travel to another location within the same country”. Tourism as an industry, in today’s modern language is a means of global communication between nations and travelers of all countries, introducing them to the various cultures and societies abroad, as well there history, ancient, historical sites, and languages. Hence, advertising overall has become a tool of necessity in this ever-growing global industry. Given that, tourism is a part of the infrastructure of any country’s economy the growth and development of tourism is of great importance. Advertising plays a vital and is a crucial tool in developing the countries tourism by attractively presenting the nations points-of-interests, historical and cultural. Advertising has a central role in expanding this industry, generating economic growth in this area, as well as creating direct and indirect employment, but most importantly a creative innovating competition in the national and international travel industry. Importantly, to achieve a successful tourist industry, the Travel Agencies and governmental offices of the Ministry’s of Tourism and Business must work hand-in-hand to attain these goals. This article shows the impact of the various media and advertising methods used in tourism, which assisted in identifying the correct tool for expanding the country’s industry of tourism. The results of this study illustrated that the appropriate tools for promotional strategies to attract domestic and foreign traveler’s, found to be the most effective were, handbook, internet advertising, TV, brochures, newspapers

The Fleet Store : devising a public retail exhibition to promote creative, innovative and sustainable business models for emerging fashion designers

1.Description of the Work The Fleet Store was devised as a creative output to establish an exhibition linked to a fashion business model where emerging designers were encouraged to research new and innovative strategies for creating design-driven and commercial collections for a public consumer. This was a project that was devised to break down the perceptions of emerging fashion designers that designing commercial collections linked to a sustainable business model is a boring and unnecessary process. The focus was to demystify the business of fashion and to link its importance to a design-driven and public outcome that is more familiar to fashion designers. The criterion for participation was that all designers had to be registered as a business with the Australian Taxation Office. Designers were chosen from the Creative Enterprise Australia Fashion Business Incubator, the QUT fashion graduate alumni and current QUT fashion design and double degree (fashion and business) students with existing businesses. The project evolved from a series of collaborative workshops where designers were introduced to new and innovative creative industries’ business models and the processes, costings and timings involved to create a niche, sustainable business for a public exhibition of design-driven commercial collections. All designers initiated their own business infra-structure but were then introduced to the concept of collaboration for successful and profitable exhibition and business outcomes. Collaborative strategies such as crowd funding, crowd sourcing, peer to peer mentoring and manufacturing were all researched, and strategies for the establishment of the retail exhibition were all devised in a collaborative environment. All participants also took on roles outside their ‘designer’ background to create a retail exhibition that was creative but also had critical mass and aesthetic for the consumer. The Fleet Store ‘popped up’ for 2 weeks (10 days), in a heritage-listed building in an inner city location. Passers-by were important, but the main consumer was enlisted by the use of interest and investment from crowd sourcing, crowd funding, ethical marketing, corporate social responsibility projects and collaborative public relations and social media strategies. The research has furthered discussion on innovative strategies for emerging fashion designers to initiate and maintain sustainable businesses and suggests that collaboration combined with a design-driven and business focus can create a sustainable and economically viable retail exhibition. 2. Research Statement Research Background The research field involved developing a new ethical, design-driven, collaborative and sustainable model for fashion design practice and management. The research asked can a public, design-driven, collaborative retail exhibition create a platform for promoting creative, innovative and sustainable business models for emerging fashion designers. The methodology was primarily practice-led as all participants were designers in their own right and the project manager acted as a mentor and curator to guide the process and analyse the potential of the research question. The Fleet Store offers new knowledge in design practice and management; with the creation of a model where design outcomes and business models are inextricably linked to the success of the creative output. Key innovations include extending the commercialisation of emerging fashion businesses by creating a curated retail gallery for collaborative and sustainable strategies to support niche fashion designer labels. This has contributed to a broader conversation on how to nurture and sustain competitive Australian fashion designers/labels. Research Contribution and Significance The Fleet Store has contributed to a growing body of research into innovative and sustainable business models for niche fashion and creative industries’ practitioners. All participants have maintained their business infra-structure and many are currently growing their businesses, using the strategies tested for the Fleet Store. The exhibition space was visited by over 1,000 people and sales of $27,000 were made in 10 days of opening. (Follow up sales of $3,000 has also been reported.) Three of the designers were ‘discovered’ from the exhibition and have received substantial orders from high profile national buyers and retailers for next season delivery. Several participants have since collaborated to create other pop up retail environments and are now mentoring other emerging designers on the significance of a collaborative retail exhibition to consolidate niche business models for emerging fashion designers.

The effect of incentive reforms upon productivity : evidence from the Vietnamese rice industry

In this study we use region-level panel data on rice production in Vietnam to investigate total factor productivity (TFP) growth in the period since reunification in 1975. Two significant reforms were introduced during this period, one in 1981 allowing farmers to keep part of their produce, and another in 1987 providing improved land tenure. We measure TFP growth using two modified forms of the standard Malmquist data envelopment analysis (DEA) method, which we have named the Three-year-window (TYW) and the Full Cumulative (FC) methods. We have developed these methods to deal with degrees of freedom limitations. Our empirical results indicate strong average TFP growth of between 3.3 and 3.5 per cent per annum, with the fastest growth observed in the period following the first reform. Our results support the assertion that incentive related issues have played a large role in the decline and subsequent resurgence of Vietnamese agriculture.

The ceiling to coproduction in university-industry research collaboration

The purpose of this paper is to provide insight into government attempts at bridging the divide between theory and practice through university-industry research collaboration modelled under engaged scholarship. The findings are based on data sourced from interviews with 47 academic and industry project leaders from 23 large scale research projects. The paper demonstrates a ceiling to the coproduction of knowledge arising from the preconceived beliefs of both academics and industry partners regarding project roles and responsibilities. The findings show that coproduction was constrained by academic partners assuming control over much of the research activities and industry partners failing to confront or challenge academic decision-making because both academics and industry partners placed a higher value on academic knowledge compared with applied or practical knowledge. It is argued the theory of engaged scholarship, and consequent initiatives to encourage engaged scholarship, fail to account for the superior status of academic knowledge.

From music student to industry professional: An entrepreneurial learning design

This design-based research project addresses the gap between formal music education curricula and the knowledge and skills necessary to enter the professional music industry. It analyses the work of a teacher/researcher who invited her high school students to start their own business venture, Youth Music Industries (YMI). YMI also functioned as a learning environment informed by the theoretical concepts of communities of practice and social capital. The students staged cycles of events of various scales over a three-year period, as platforms for young artists to engage and develop new, young audiences across Queensland, Australia. The study found that students developed an entrepreneurial mindset through acquisition of specific skills and knowledge. Their learning was captured and distilled into a set of design principles, a pedagogical approach transferrable across the creative industries more broadly.

Robotics for the mining industry

The mining industry is highly suitable for the application of robotics and automation technology since the work is both arduous and dangerous. However, while the industry makes extensive use of mechanisation it has shown a slow uptake of automation. A major cause of this is the complexity of the task, and the limitations of existing automation technology which is predicated on a structured and time invariant working environment. Here we discuss the topic of mining automation from a robotics and computer vision perspective — as a problem in sensor based robot control, an issue which the robotics community has been studying for nearly two decades. We then describe two of our current mining automation projects to demonstrate what is possible for both open-pit and underground mining operations.

Three-dimensional printing in the construction industry: A review

3D printing (3Dp) has long been used in the manufacturing sector as a way to automate, accelerate production and reduce waste materials. It is able to build a wide variety of objects if the necessary specifications are provided to the printer and no problems are presented by the limited range of materials available. With 3Dp becoming cheaper, more reliable and, as a result, more prevalent in the world at large, it may soon make inroads into the construction industry. Little is known however, of 3Dp in current use the construction industry and its potential for the future and this paper seeks to rectify this situation by providing a review of the relevant literature. In doing this, the three main 3Dp methods of contour crafting, concrete printing and D-shape 3Dp are described which, as opposed to the traditional construction method of cutting materials down to size, deliver only what is needed for completion, vastly reducing waste. Also identified is 3Dp’s potential to enable buildings to be constructed many times faster and with significantly reduced labour costs. In addition, it is clear that construction 3Dp can allow the further inclusion of Building Information Modelling into the construction process - streamlining and improving the scheduling requirements of a project. However, current 3Dp processes are known to be costly, unsuited to large-scale products and conventional design approaches, and have a very limited range of materials that can be used. Moreover, the only successful examples of construction in action to date have occurred in controlled laboratory environments and, as real world trials have yet to be completed, it is yet to be seen whether it can be it equally proficient in practical situations. Key Words: 3D Printing; Contour Crafting; Concrete Printing; D-shape; Building Automation.

Industry-school partnerships: An ecological case study to understand operational dynamics

This thesis is an ecological systems case study of an industry-school partnership. It examines a minerals and energy sector partnership with Queensland schools and explains the operational dynamics. In doing so, an original contribution to theory and practice was presented, together with implications for the impact of industry on education.

Economic analyses of Australia's Sydney rock oyster industry

This thesis provides the first comprehensive assessment of the economic viability of Australia's Sydney rock oyster industry and forms the bases for future policy and industry management recommendations. In the four separate studies of the thesis, the socio-economic profile of the industry, the market price formation dynamics within Australia's oyster market, efficiency and productivity levels and the potential impact of climate change and market dynamics on the industry's future revenue were investigated. Findings of this project suggest, for example, that market dynamics may pose a greater thread to the future development of this industry than direct effect from climate change.

Strength properties of composite clay balls containing additives from industry wastes as new filter media in water treatment

Pebble matrix filtration (PMF) is a water treatment technology that can remove suspended solids in highly turbid surface water during heavy storms. PMF typically uses sand and natural pebbles as filter media. Hand-made clay pebbles (balls) can be used as alternatives to natural pebbles in PMF treatment plants, where natural pebbles are not readily available. Since the high turbidity is a seasonal problem that occurs during heavy rains, the use of newly developed composite clay balls instead of pure clay balls have the advantage of removing other pollutants such as natural organic matter (NOM) during other times. Only the strength properties of composite clay balls are described here as the pollutant removal is beyond the scope of this paper. These new composite clay balls must be able to withstand dead and live loads under dry and saturated conditions in a filter assembly. Absence of a standard ball preparation process and expected strength properties of composite clay balls were the main reasons behind the present study. Five different raw materials from industry wastes: Red Mud (RM), Water Treatment Alum Sludge (S), Shredded Paper (SP), Saw Dust (SD), and Sugar Mulch (SM) were added to common clay brick mix (BM) in different proportions. In an effort to minimize costs, in this study clay balls were fired to 1100 0C at a local brick factory together with their bricks. A comprehensive experimental program was performed to evaluate crushing strength of composite hand-made clay balls, using uniaxial compression test to establish the best material combination on the basis of strength properties for designing sustainable filter media for water treatment plants. Performance at both construction and operating stages were considered by analyzing both strength properties under fully dry conditions and strength degradation after saturation in a water bath. The BM-75% as the main component produced optimum combination in terms of workability and strength. With the material combination of BM-75% and additives-25%, the use of Red Mud and water treatment sludge as additives produced the highest and lowest strength of composite clay balls, with a failure load of 5.4 kN and 1.4 kN respectively. However, this lower value of 1.4 kN is much higher than the effective load on each clay ball of 0.04 kN in a typical filter assembly (safety factor of 35), therefore, can still be used as a suitable filter material for enhanced pollutant removal.

The good, the bad, and the efficient: Productivity, efficiency, and technical change in the airline industry, 2004–11

This study models the joint production of desirable and undesirable output production (that is, CO2 emissions) of airlines. The Malmquist–Luenberger productivity index is employed to measure productivity growth when undesirable output production is incorporated into the production model. The results show that pollution abatement activities of airlines lowers productivity growth, which suggests that the traditional approach of measuring productivity growth, which ignores CO2 emissions, overstates ‘true’ productivity growth. The reliability of the results is also tested and verified using confidence intervals based on bootstrapping.

Submission to Communications Alliance Industry Code: Copyright Notice Scheme

In making this submission, we suggest that Australia learn from the experiences of other jurisdictions, and avoid some of the mistakes that have been made. In particular, this involves: * Ensuring that adequate information is available to evaluate the success of the scheme * Ensuring that notices sent to consumers provide full and accurate information that helps them understand their rights and options * Limiting the potential abuse of the system, and particularly attempts to intimidate consumers into paying unfair penalties through ‘speculative invoicing’ * Avoiding the potential for actual or perceived bias in the scheme’s oversight body

Remaining useful life prediction of rotating equipment using covariate-based hazard models : industry applications

The ability to estimate the expected Remaining Useful Life (RUL) is critical to reduce maintenance costs, operational downtime and safety hazards. In most industries, reliability analysis is based on the Reliability Centred Maintenance (RCM) and lifetime distribution models. In these models, the lifetime of an asset is estimated using failure time data; however, statistically sufficient failure time data are often difficult to attain in practice due to the fixed time-based replacement and the small population of identical assets. When condition indicator data are available in addition to failure time data, one of the alternate approaches to the traditional reliability models is the Condition-Based Maintenance (CBM). The covariate-based hazard modelling is one of CBM approaches. There are a number of covariate-based hazard models; however, little study has been conducted to evaluate the performance of these models in asset life prediction using various condition indicators and data availability. This paper reviews two covariate-based hazard models, Proportional Hazard Model (PHM) and Proportional Covariate Model (PCM). To assess these models’ performance, the expected RUL is compared to the actual RUL. Outcomes demonstrate that both models achieve convincingly good results in RUL prediction; however, PCM has smaller absolute prediction error. In addition, PHM shows over-smoothing tendency compared to PCM in sudden changes of condition data. Moreover, the case studies show PCM is not being biased in the case of small sample size.