Efeitos do freio magnético sobre a distribuição da rotação estelar

The pioneering work proposed by Skumanich (1972) has shown that the projected mean rotational velocity < v sini > for solar type stars follows a rotation law decreases with the time given by t −1/2 , where t is the stellar age. This relationship is consistent with the theories of the angular momentum loss through the ionized stellar wind, which in turn is coupled to the star through its magnetic field. Several authors (e.g.: Silva et al. 2013 and de Freitas et al. 2014) have analyzed the possible matches between the rotational decay and the profile of the velocity distribution. These authors came to a simple heuristic relationship, but did not build a direct path between the exponent of the rotational decay (j) and the exponent of the distribution of the rotational velocity (q). The whole theoretical scenario has been proposed using an efficient and strong statistical mechanics well known as non-extensive statistical mechanics. The present dissertation proposes effectively to close this issue by elaborating a theoretical way to modify the q-Maxwellians’ distributions into q-Maxwellians with physics links extracted from the theory of magnetic braking. In order to test our distributions we have used the GenevaCapenhagen Survey data with approximately 6000 F and G field stars limited by age. As a result, we obtained that the exponents of the decay law and distribution follow a similar relationship to that proposed by Silva et al. (2013).

Regulador eletromagnético de frequência aplicado no controle de velocidade de geradores eólicos

The constant necessity for new sources of renewable energy is increasingly promoting the increase of investments in this area. Among other sources, the wind power has been becoming prominent. It is important to promote the search for the improvement of the technologies involved in the topologies of the wind turbines, seeking for alternatives which enhance the gotten performance, despite the irregularity of the wind speed. This study presents a new system for speed control, in this case applied to the wind turbines - the Electromagnetic Frequency Regulator (EFR). One of the most used devices in some topologies is the mechanical gearboxes which, along with a short service life, often represent sources of noise and defects. The EFR does not need these transmission boxes, representing a technological advancement, using for that an adapted induction machine, in which the stator becomes mobile, supportive to the axis of the turbine. In the topology used in this study, the EFR also allows us to leave out the usage of the eletronic converters to establish the coupling between the generator and the electrical grid. It also the reason why it provides the possibility of obtaining the generation in alternating current, with constant voltage and frequency, where there is no electrical grid. Responsable for the mechanical speed control of the generator, the EFR can be useful in other transmission systems in which the mechanical speed control output is the objective. In addition, the EFR operates through the combination of two inputs, a mechanical and other electrical. It multiplies the possibilities of application because it is able to synergistic coupling between different arrays of energy, and, for such reasons, it enables the various sources of energy involved to be uncoupled from the network, being the synchronous generator responsible for the system connection with the electrical grid, simplifying the control strategies on the power injected in it. Experimental and simulation results are presented through this study, about a wind turbine, validating the proposal related to the efficience in the speed control of the system for different wind conditions.

Proposta de válvula bypass para controle de velocidade de PIGs instrumentados: protótipo e simulação em bancada

In the Oil industry, oil and gas pipelines are commonly utilized to perform the transportation of production fluids to longer distances. The maintenance of the pipelines passes through the analysis of several tools, in which the most currently used are the pipelines inspection cells, popularly knowing as PIG. Among the variants existing in the market, the instrumented PIG has a significant relevance; acknowledging that through the numerous sensors existing in the equipment, it can detect faults or potential failure along the inspected line. Despite its versatility, the instrumented PIG suffers from speed variations, impairing the reading of sensors embedded in it. Considering that PIG moves depending on the speed of the production fluid, a way to control his speed is to control the flow of the fluid through the pressure control, reducing the flow rate of the produced flow, resulting in reduction of overall production the fluid in the ducts own or with the use of a restrictive element (valve) installed on it. The characteristic of the flow rate/pressure drop from restrictive elements of the orifice plate is deducted usually from the ideal energy equation (Bernoulli’s equation) and later, the losses are corrected normally through experimental tests. Thus, with the objective of controlling the fluids flow passing through the PIG, a valve shutter actuated by solenoid has been developed. This configuration allows an ease control and stabilization of the flow adjustment, with a consequent response in the pressure drops between upstream and downstream of the restriction. It was assembled a test bench for better definition of flow coefficients; composed by a duct with intern diameter of four inches, one set of shutters arranged in a plate and pressure gauges for checking the pressure drop in the test. The line was pressurized and based on the pressure drop it was possible to draw a curve able to characterize the flow coefficient of the control valve prototype and simulate in mockup the functioning, resulting in PIG speed reduction of approximately 68%.

Protótipo de rastreador solar de um eixo baseado em microcontrolador

The increase in the efficiency of photo-voltaic systems has been the object of various studies the past few years. One possible way to increase the power extracted by a photovoltaic panel is the solar tracking, performing its movement in order to follow the sun’s path. One way to activate the tracking system is using an electric induction motor, which should have sufficient torque and low speed, ensuring tracking accuracy. With the use of voltage source inverters and logic devices that generate the appropriate switching is possible to obtain the torque and speed required for the system to operate. This paper proposes the implementation of a angular position sensor and a driver to be applied in solar tracker built at a Power Electronics and Renewable Energies Laboratory, located in UFRN. The speed variation of the motor is performed via a voltage source inverter whose PWM command to actuate their keys will be implemented in an FPGA (Field Programmable Gate Array) device and a TM4C microcontroller. A platform test with an AC induction machine of 1.5 CV was assembled for the comparative testing. The angular position sensor of the panel is implemented in a ATMega328 microcontroller coupled to an accelerometer, commanded by an Arduino prototyping board. The solar position is also calculated by the microcontroller from the geographic coordinates of the site where it was placed, and the local time and date obtained from an RTC (Real-Time Clock) device. A prototype of a solar tracker polar axis moved by a DC motor was assembled to certify the operation of the sensor and to check the tracking efficiency.

Angular momentum of S0 galaxies

The aim of this thesis is to study the angular momentum of a sample of S0 galaxies. In the quest to understand whether the formation of S0 galaxies is more closely linked to that of ellipticals or that of spirals, our goal is to compare the amount of their specific angular momentum as a function of stellar mass with respect to spirals. Through kinematic comparison between these different classes of galaxies we aim to understand if a scenario of passive evolution, in which the galaxy’s gas is consumed and the star formation is quenched, can be considered as plausible mechanism to explain the transformation from spirals to S0s. In order to derive the structural and photometric parameters of galaxy sub-components we performed a bulge-disc decomposition of optical images using GALFIT. The stellar kinematic of the galaxies was measured using integral field spectroscopic data from CALIFA survey. The development of new original software, based on a Monte Carlo Markov Chain algorithm, allowed us to obtain the values of the line of sight velocity and velocity dispersion of disc and bulge components. The result that we obtained is that S0 discs have a distribution of stellar specific angular momentum that is in full agreement with that of spiral discs, so the mechanism of simple fading can be considered as one of the most important for transformation from spirals to S0s.

Análise da variabilidade da marcha de indivíduos com comprometimento articular unilateral do quadril por meio de sensores inerciais

Data variability analysis has been the focus of a number of studies seeking to capture differences of patterns generated by biological systems. Although several studies related to gait employ the analysis of variability in their observations, we noticed a lack of such information for subjects with unilateral coxarthrosis undergoing total hip arthroplasty (THA). To tackle this deficiency of information, we conducted a study of the gait on a treadmill with10 healthy subjects (30.7 ± 6.75 years old) from G1 and 24 subjects (65 ± 8.5 years old) with unilateral THA from G2. Thus, by means of two inertial measurement units (IMUs) positioned in the pelvis, we have developed a detection method of the step and stride for calculating these intervals and extract the signal characteristics. The variability analysis (coefficient of variation) was performed, taking into consideration the extracted features and the step and stride times. The average and the 95% confidence interval estimate for the average of the step and stride times to each group were in agreement with literature. The mean coefficient of variation for the step and stride times was calculated and compared among groups by the Kruskal-Wallis test with 95% confidence interval. Each component X, Y and Z of the two IMUs (accelerometer, magnetometer and gyroscope) corresponded to a variable. The resultants of each sensor, the linear velocity (accelerometers) and the instantaneous angular displacement (gyroscopes) completed the set of variables. The characteristics were extracted from the signals of these variables to check the variability in the G1 and G2 groups . There were significant differences (p <0.05) between G1 and G2 for the average of the step and stride times. The variability of the step and stride, as well as the variability of all other evaluated characteristics were higher for the group G2 (p <0.05). The method proposed in this study proved to be suitable for the measuring of variability of biomechanical parameters related to the extracted features. All the extracted features categorized the groups. The G2 group showed greater variability, so it is possible that the age and the pathological condition of the hip both contributed to this result.

Efeitos da internacionalização no desvio da estrutura de capital alvo e na velocidade de ajuste

This dissertation investigates the effects of internationalization in two gaps related to the capital structure that have not been discussed by the Brazilian literature yet. To this, were developed two independent sections. The first examined what the effects of internationalization on the deviation from the target capital structure. The second examined what the effects of internationalization on speed of adjustment (SOA) of the capital structure. It used data from Brazil, multinational and domestic companies, from 2006 to 2014. The results of the first analysis indicate that internationalization helps reduce the difference between the target and the current debt. That is, to the extent that the level of internationalization increases; whether only export or a combination of export, assets and employees abroad, the gap between the current structure and the target structure decreases. This reduction is given as a function of internationalization as a consequence of the upstream effect of the upstream-downstream hypothesis. Thus, as the Market Timing theory, it can be seen as an opportunity for adjustment of the capital structure, and with the reduction of deviation, there is also a reduction in the cost of capital of the firm. The result of the second analysis indicates that internationalization is able to significantly increase the speed adjustment, ensuring for the multinational a faster adjustment of its capital structure. Exports increase the SOA in 9 to 23%. And when also kept active assets and employees abroad the increase is 8 to 20%. In terms of time, while domestic company takes more than three years to reduce half of the deviation that has, while multinacional companies take on average one and a half year to reduce the same proportion of the deviation. The validity of the upstream-downstream hypothesis for the effect of internationalization in SOA was confirmed by comparing the results for US companies. Thus, the phenomenon of internationalization increases SOA when companies are from less stable markets, such as Brazil; and it has a less significcative effect when companies are derived from more stable markets, because they already have a high speed of adjustmennt. In addition, the adequacy analysis of the estimators also showed the model pooled OLS (Ordinary Least Squares) presents the highest quality in predicting the SOA than the system GMM (Generalized Method of Moments). For future studies it is suggested to analyze the effect of international event, by itself, and to validate the hypothesis using samples of different markets and the use of other estimators.

O PLANEJAMENTO DA COMUNICAÇÃO ON-LINE: Como a velocidade no fluxo da informação altera a forma de planejar

O advento da internet causou uma revolução na forma como a sociedade se relaciona. A consolidação das mídias sociais na ambiência digital acentuou o poder das mudanças e forçou a comunicação a rever paradigmas. O imediatismo e a velocidade com que a informação se propaga num processo simétrico de mão dupla – emissor e receptor – mudou a forma de trabalhar, pensar e planejar. O presente trabalho traz uma pesquisa com profissionais de comunicação e analisa como o fator prazo tem impactado no processo do planejamento de longo prazo – tradicionalmente anual – das ações voltadas para o ambiente digital. A pesquisa baseou-se em amplo referencial teórico das áreas de comunicação, marketing, redes e mídias sociais, tecnologia, administração, além de institutos de pesquisas e empresas. A fim de descrever as experiências vividas pelos profissionais, empreendemos ainda uma pesquisa qualitativa com entrevistas em profundidade, com amostra não probabilística, com foco nas disciplinas de marketing e propaganda e relações públicas. Os resultados apontam para um aprendizado ainda sendo conquistado, dia após dia, a partir de tentativas e erros, onde a preocupação dos profissionais fica dividida entre o prazo de antecedência com que é feito um planejamento e a obrigatoriedade de sua revisão contínua.

React vs Angular : Slaget om användarupplevelsen

Lately, various programming frameworks has been developed for developing web applications. These frameworks focus on increasing the user experience by performance improvements such as faster render times and response times. One of these frameworks are React, which has introduced a completely new architectural pattern for both managing the state and data flow of an application. React also offers support for native application development and makes server-side rendering possible. Something that is difficult to accomplish with an application developed with Angular 1.5, which is used by the company Dewire today. The aim of this thesis was to compare React with an existing Angular project, in order to determine whether React could be a potential replacement for Angular. To gain knowledge about the subject, a theoretical study of web- based sources has been made. While the practical part has been to rebuild a web application with React together with the architecture Flux, which is based on a view from the Angular project. The implementation process was repeated until the view was completed and a desired data flow, as in the Angular application, was reached. The resulting React application was later compared with the Angular application developed by the company, where the outcome of the comparison showed that the React performed better than Angular in all tests. In conclusion, due to the timeframe of the project, only the most important parts of the Angular project were implemented in order to carry out the measurements that were of interest to the company. By recreating most of the functionality, or the entire Angular application, more interesting comparisons could have been done.

Design and modeling of optical fibers for spatial division multiplexing using the orbital angular momentum of light

Les besoins toujours croissants en terme de transfert de données numériques poussent au développement de nouvelles technologies pour accroître la capacité des réseaux, notamment en ce qui concerne les réseaux de fibre optique. Parmi ces nouvelles technologies, le multiplexage spatial permet de multiplier la capacité des liens optiques actuels. Nous nous intéressons particulièrement à une forme de multiplexage spatial utilisant le moment cinétique orbital de la lumière comme base orthogonale pour séparer un certain nombre de canaux. Nous présentons d’abord les notions d’électromagnétisme et de physique nécessaires à la compréhension des développements ultérieurs. Les équations de Maxwell sont dérivées afin d’expliquer les modes scalaires et vectoriels de la fibre optique. Nous présentons également d’autres propriétés modales, soit la coupure des modes, et les indices de groupe et de dispersion. La notion de moment cinétique orbital est ensuite introduite, avec plus particulièrement ses applications dans le domaine des télécommunications. Dans une seconde partie, nous proposons la carte modale comme un outil pour aider au design des fibres optiques à quelques modes. Nous développons la solution vectorielle des équations de coupure des modes pour les fibres en anneau, puis nous généralisons ces équations pour tous les profils de fibres à trois couches. Enfin, nous donnons quelques exemples d’application de la carte modale. Dans la troisième partie, nous présentons des designs de fibres pour la transmission des modes avec un moment cinétique orbital. Les outils développés dans la seconde partie sont utilisés pour effectuer ces designs. Un premier design de fibre, caractérisé par un centre creux, est étudié et démontré. Puis un second design, une famille de fibres avec un profil en anneau, est étudié. Des mesures d’indice effectif et d’indice de groupe sont effectuées sur ces fibres. Les outils et les fibres développés auront permis une meilleure compréhension de la transmission dans la fibre optique des modes ayant un moment cinétique orbital. Nous espérons que ces avancements aideront à développer prochainement des systèmes de communications performants utilisant le multiplexage spatial.

Qual a contribuição das características antropométricas na velocidade de corrida de curta distância ?

v. 19, n. 2, abr./jun. 2016.