Sensing the environment : a role for the mouse olfactory subsystems

Summary : Four distinct olfactory subsystems compose the mouse olfactory system, the main olfactory epithelium (MOE), the septal organ of Masera (SO), the vomeronasal organ (VNO) and the Grueneberg ganglion (GG). They are implicated in the sensory modalities of the animal and they evolved to analyse and discriminate molecules carrying chemical messages, such as odorants and pheromones. In this thesis, the VNO, principally implicated in pheromonal communications as well as the GG, which had no function attributed until this work, were investigated from their morphology to their physiological functions, using an array of biochemical and physiological methods. First, the roles of a particular protein, the CNGA4 ion channel, were investigated in the VNO. In the MOE, CNGA4 is expressed as a modulatory channel subunit implicated in odour discrimination and adaptation. Interestingly, this calcium channel is the unique member of the cyclic nucleotide-gated (CNG) family to be expressed in the VNO and up to this work its functions remained unknown. Using a combination of transgenic and knockout mice, as well as histological and physiological approaches, we have characterized CNGA4 expression in the VNO. A strong expression in immature neurons was found as well as in the microvilli of mature neurons (putative site of chemodetection). Interestingly and confirming its dual localisation, the genetic invalidation of the CNGA4 channel has, as consequences, a strong impairment in vomeronasal maturation as well as deficit in pheromone sensing. Thus the CNGA4 channel appears to be a multifunctional protein in the mouse VNO playing essential role(s) in this organ. During the second part of the work, the morphology of the most recently described olfactory subsystem, the Grueneberg ganglion, was investigated in detail. Interestingly we found that glial cells and ciliated neurons compose this olfactory ganglion. This particular morphological aspect was similar to the olfactory AWC neurons from C. elegans which was used for further comparisons. Thus as for AWC neurons, we found that GG neurons are sensitive to temperature changes and are able to detect highly volatile molecules. Indeed, the presence of alarm pheromones (APs) secreted by stressed mice, elicit strong cellular responses, as well as a GG dependent behavioural changes. Investigations on the signaling elements present in GG neurons revealed that, as for AWC neurons, or pGC-D expressing neurons from the MOE, proteins participating in a cGMP pathway were found in GG neurons such as pGC-G and CNGA3 channels. These two proteins might be implicated in chemosensing as well as in thermosensing, two apparent properties of this organ. In this thesis, the multisensory modalities of two mouse olfactory subsystems were described and are related to a high degree of complexity required for the animal to sense its environment

Multivariate analyses of genotype x environment interaction of popcorn

The objectives of this work were to evaluate the genotype x environment (GxE) interaction for popcorn and to compare two multivariate analyses methods. Nine popcorn cultivars were sown on four dates one month apart during each of the agricultural years 1998/1999 and 1999/2000. The experiments were carried out using randomized block designs, with four replicates. The cv. Zélia contributed the least to the GxE interaction. The cv. Viçosa performed similarly to cv. Rosa-claro. Optimization of GxE was obtained for cv. CMS 42 for a favorable mega-environment, and for cv. CMS 43 for an unfavorable environment. Multivariate analysis supported the results from the method of Eberhart & Russell. The graphic analysis of the Additive Main effects and Multiplicative Interaction (AMMI) model was simple, allowing conclusions to be made about stability, genotypic performance, genetic divergence between cultivars, and the environments that optimize cultivar performance. The graphic analysis of the Genotype main effects and Genotype x Environment interaction (GGE) method added to AMMI information on environmental stratification, defining mega-environments and the cultivars that optimized performance in those mega-environments. Both methods are adequate to explain the genotype x environment interactions.

Leaf development and growth of selected sugarcane clones in a subtropical environment

The objective of this work was to compare phyllochron and leaf area on individual stalks of selected sugarcane (Saccharum officinarum) clones grown in a subtropical environment. A two-year field experiment was carried out in Santa Maria, RS, Brazil, during the 2007/2008 and 2008/2009 growing seasons. Three sugarcane clones were used: IAC 822045 (early), SP 711406 (median) and CB 4176 (late), in a complete randomized block design, with four replications. Expanded leaf and total leaf (tips) number were determined, and expanded leaf area was measured. The phyllochron (ºC day leaf-1) based on expanded and tip leaf number was estimated, using 10ºC as base temperature. Allometric relationships between individual area and number of expanded leaves were fitted. Phyllochron was analysed as a four-factor experiment: clone, growing season, phyllochron phase, and phyllochron type. The early clone had the greatest potential for growing in a subtropical climate because of higher leaf output and leaf area.

Correlations between Vocal Input and Visual Response Apparently Enhance Presence in a Virtual Environment

This work investigates novel alternative means of interaction in a virtual environment (VE).We analyze whether humans can remap established body functions to learn to interact with digital information in an environment that is cross-sensory by nature and uses vocal utterances in order to influence (abstract) virtual objects. We thus establish a correlation among learning, control of the interface, and the perceived sense of presence in the VE. The application enables intuitive interaction by mapping actions (the prosodic aspects of the human voice) to a certain response (i.e., visualization). A series of single-user and multiuser studies shows that users can gain control of the intuitive interface and learn to adapt to new and previously unseen tasks in VEs. Despite the abstract nature of the presented environment, presence scores were generally very high.

Product costing in SAP environment

Kustannuslaskennan ala on muuttumassa. IT teknologian hämmästyttävän nopea kehitys viime vuosina on luonut kustannuslaskennalle uusia mahdollisuuksia. Toisaalta myös kustannuslaskennalle asetetut vaatimukset ovat muuttuneet. Nykyisin kustannustietoutta tarvitaan erityisesti päätöksenteon tueksi. Kaikesta huolimatta yleisesti käytetyt laskentamenetelmät eivät ole muuttuneet. Työn tavoite on tutkia mahdollisia tapoja tuotekohtaisen kustannuslaskennan toteuttamiseksi SAP toiminnanohjausjärjestelmän avulla. Erityisesti toiminnanohjausjärjestelmien nopea kehitys on mahdollistanut aikaisempaa nopeamman ja tarkemman kustannuslaskennan. On kuitenkin muistettava, että järjestelmät ovat vaintyökaluja. On siis erittäin tärkeää valita tarkoituksenmukainen laskentamenetelmä. Työn perimmäinen tarkoitus onkin valita kyseessä olevaan tilanteeseen sopivin menetelmä.Viime vuosien akateemisessa kirjoittelussa on esitelty useita uusia kustannuslaskentamenetelmiä. Toimintolaskennan uusi versio, Time-Driven Activity-Based Costing, on eräs varteenotettava vaihtoehto tuotekohtaisen kustannuslaskennan toteuttamiseksi SAP-ympäristössä. Toinen hyvin soveltuva menetelmä on Resource Consumption Accounting (RCA), joka soveltuu erityisen hyvin SAP-ympäristöön.Molemmilla menetelmillä on hyvät ja huonot puolet, mutta tässä tapauksessa RCA soveltuu tehtävään paremmin. RCA on joustava ja tarjoaa laaja-alaista tietoa. Tästä syystä Resource Consumption Accounting oli paras vaihtoehto.Työssä rakennettu RCA malli testattiin kolmen erilaisen tuotteen historiallisella datalla. RCA:ntuomia mahdollisuuksia pohdittiin ja ongelmia selvitettiin. RCA on hyvin saman tyyppinen yrityksessä jo käytettävän laskentamenetelmän kanssa. Implementointi ei siis olisi mahdoton tehtävä. RCA kuitenkin tarjoaa mahdollisuuksia, joita nykyisellä menetelmällä ei voida saavuttaa.

Pollination requirements of seeded and seedless mini watermelon varieties cultivated under protected environment

The objective of this work was to evaluate the floral biology and pollination requirements of seeded and seedless mini watermelon varieties, and to determine the best varieties to cultivate under protected environment. Three seedless (HA-5106, HA-5158, and HA-5161) and two seeded (Minipol and Polimore) genotypes were tested. Flowers were monitored from the pre-anthesis stage to senescence, and fruit quality was also evaluated. The evaluated treatments were hand-geitonogamous pollination (MG), cross-pollination with pollen from the Polimore variety (MCP), cross-pollination with pollen from the Minipol variety (MCM), and restricted pollination. All varieties had monoecious plants with diclinous flowers, and the stigmas remained receptive throughout anthesis. Fruit set rates of 84.62% (MG), 61.54% (MCP), 48% (MCM), and 0% (restricted) were obtained for seeded varieties, but of 0% (MG), 76.36% (MCP), 82.69% (MCM), and 0% (restricted) for seedless varieties. Fruits did not differ in quality among treatments within each genotype. Therefore, all the studied varieties require a pollination agent and diploid pollen for fruit set to occur, regardless of the donor variety; and Minipol or Polimore with HA-5106 or HA-5158 are the varieties recommended for cultivation in protected environment.

Correlations between vocal input and visual response apparently enhance presence in a virtual environment

This work investigates novel alternative means of interaction in a virtual environment (VE).We analyze whether humans can remap established body functions to learn to interact with digital information in an environment that is cross-sensory by nature and uses vocal utterances in order to influence (abstract) virtual objects. We thus establish a correlation among learning, control of the interface, and the perceived sense of presence in the VE. The application enables intuitive interaction by mapping actions (the prosodic aspects of the human voice) to a certain response (i.e., visualization). A series of single-user and multiuser studies shows that users can gain control of the intuitive interface and learn to adapt to new and previously unseen tasks in VEs. Despite the abstract nature of the presented environment, presence scores were generally very high.

XML-based information management environment for PE technologies

Printed electronics is an emerging concept in electronics manufacturing and it is in very early development stage. The technology is not stable, design kits are not developed, and flows and Computer Aided Design (CAD) tools are not fixed yet. The European project TDK4PE addresses all this issues and this PFC has been realized on this context. The goal is to develop an XML-based information system for the collection and management of information from the technology and cell libraries developed in TDK4PE. This system will ease the treatment of that information for a later generation of specific Design Kits (DK) and the corresponding documentation. This work proposes a web application to generate technology files and design kits in a formatted way; it also proposes a structure for them and a database implementation for storing the needed information. The application will allow its users to redefine the structure of those files, as well as export and import XML files, between other formats.

Improving distributed simulation in a workstation environment

Technological development brings more and more complex systems to the consumer markets. The time required for bringing a new product to market is crucial for the competitive edge of a company. Simulation is used as a tool to model these products and their operation before actual live systems are built. The complexity of these systems can easily require large amounts of memory and computing power. Distributed simulation can be used to meet these demands. Distributed simulation has its problems. Diworse, a distributed simulation environment, was used in this study to analyze the different factors that affect the time required for the simulation of a system. Examples of these factors are the simulation algorithm, communication protocols, partitioning of the problem, distributionof the problem, capabilities of the computing and communications equipment and the external load. Offices offer vast amounts of unused capabilities in the formof idle workstations. The use of this computing power for distributed simulation requires the simulation to adapt to a changing load situation. This requires all or part of the simulation work to be removed from a workstation when the owner wishes to use the workstation again. If load balancing is not performed, the simulation suffers from the workstation's reduced performance, which also hampers the owner's work. Operation of load balancing in Diworse is studied and it is shown to perform better than no load balancing, as well as which different approaches for load balancing are discussed.

Development of advanced silicon radiation detectors for harsh radiation environment

This thesis describes the development of advanced silicon radiation detectors and their characterization by simulations, used in the work for searching elementary particles in the European Organization for Nuclear Research, CERN. Silicon particle detectors will face extremely harsh radiation in the proposed upgrade of the Large Hadron Collider, the future high-energy physics experiment Super-LHC. The increase in the maximal fluence and the beam luminosity up to 1016 neq / cm2 and 1035 cm-2s-1 will require detectors with a dramatic improvement in radiation hardness, when such a fluence will be far beyond the operational limits of the present silicon detectors. The main goals of detector development concentrate on minimizing the radiation degradation. This study contributes mainly to the device engineering technology for developing more radiation hard particle detectors with better characteristics. Also the defect engineering technology is discussed. In the nearest region of the beam in Super-LHC, the only detector choice is 3D detectors, or alternatively replacing other types of detectors every two years. The interest in the 3D silicon detectors is continuously growing because of their many advantages as compared to conventional planar detectors: the devices can be fully depleted at low bias voltages, the speed of the charge collection is high, and the collection distances are about one order of magnitude less than those of planar technology strip and pixel detectors with electrodes limited to the detector surface. Also the 3D detectors exhibit high radiation tolerance, and thus the ability of the silicon detectors to operate after irradiation is increased. Two parameters, full depletion voltage and electric field distribution, is discussed in more detail in this study. The full depletion of the detector is important because the only depleted area in the detector is active for the particle tracking. Similarly, the high electric field in the detector makes the detector volume sensitive, while low-field areas are non-sensitive to particles. This study shows the simulation results of full depletion voltage and the electric field distribution for the various types of 3D detectors. First, the 3D detector with the n-type substrate and partial-penetrating p-type electrodes are researched. A detector of this type has a low electric field on the pixel side and it suffers from type inversion. Next, the substrate is changed to p-type and the detectors having electrodes with one doping type and the dual doping type are examined. The electric field profile in a dual-column 3D Si detector is more uniform than that in the single-type column 3D detector. The dual-column detectors are the best in radiation hardness because of their low depletion voltages and short drift distances.

Disc Filter External Models in an Integrated Simulation Environment

Työssä tutkittiin kiekkosuodattimeen liittyviä ulkoisia simulointimalleja integroidussa simulointiympäristössä. Työn tarkoituksena oli parantaa olemassa olevaa mekanistista kiekkosuodatinmallia. Malli laadittiin dynaamiseen paperiteollisuuden tarpeisiin tehtyyn simulaattoriin (APMS), jossa olevaan alkuperäiseen mekanistiseen malliin tehtiin ulkoinen lisämalli, joka käyttää hyväkseen kiekkosuodatinvalmistajan mittaustuloksia. Laitetiedon saatavuutta suodattimien käyttäjille parannettiin luomalla Internetissä sijaitsevalle palvelimelle kiekkosuodattimen laitetietomäärittelyt. Suodatinvalmistaja voi palvella asiakkaitaan viemällä laitetiedot palvelimelle ja yhdistämällä laitetiedon simulointimalliin. Tämä on mahdollista Internetin ylitse käytettävän integroidun simulointiympäristön avulla, jonka on tarkoitus kokonaisvaltaisesti yhdistää simulointi ja prosessisuunnittelu. Suunnittelijalle tarjotaan työkalut, joilla dynaaminen simulointi, tasesimulointi ja kaavioiden piirtäminen onnistuu prosessilaitetiedon ollessa saatavilla. Nämä työkalut on tarkoitus toteuttaa projektissa nimeltä Galleria, jossa luodaan prosessimalli- ja laitetietopalvelin Internetiin. Gallerian käyttöliittymän avulla prosessisuunnittelija voi käyttää erilaisia simulointiohjelmistoja ja niihin luotuja valmiita malleja, sekä saada käsiinsä ajan tasalla olevaa laitetietoa. Ulkoinen kiekkosuodatinmalli laskee suodosvirtaamat ja suodosten pitoisuudet likaiselle, kirkkaalle ja superkirkkaalle suodokselle. Mallin syöttöparametrit ovat kiekkojen pyörimisnopeus, sisään tulevan syötön pitoisuus, suotautuvuus (freeness) ja säätöparametri, jolla säädetään likaisen ja kirkkaan suodoksen keskinäinen suhde. Suotautuvuus kertoo mistä massasta on kyse. Mitä suurempi suotautuvuus on, sitä paremmin massa suodattuu ja sitä puhtaampia suodokset yleensä ovat. Mallin parametrit viritettiin regressioanalyysillä ja valmistajan palautetta apuna käyttäen. Käyttäjä voi valita haluaako hän käyttää ulkoista vai alkuperäistä mallia. Alkuperäinen malli täytyy ensin alustaa antamalla sille nominaaliset toimintapisteet virtaamille ja pitoisuuksille tietyllä pyörimisnopeudella. Ulkoisen mallin yhtälöitä voi käyttää alkuperäisen mallin alustamiseen, jos alkuperäinen malli toimii ulkoista paremmin. Ulkoista mallia voi käyttää myös ilman simulointiohjelmaa Galleria-palvelimelta käsin. Käyttäjälle avautuu näin mahdollisuus tarkastella kiekkosuodattimien parametreja ja nähdä suotautumistulokset oman työasemansa ääreltä mistä tahansa, kunhan Internetyhteys on olemassa. Työn tuloksena kiekkosuodattimien laitetiedon saatavuus käyttäjille parani ja alkuperäisen simulointimallin rajoituksia ja puutteita vähennettiin.

Integrating Socket Server to the Workstation Environment of Series 40 Platform

Shortening development times of mobile phones are also accelerating the development times of mobile phone software. New features and software components should be partially implemented and tested before the actual hardware is ready. This brings challenges to software development and testing environments, especially on the user interface side. New features should be able to be tested in an environment, which has a look and feel like a real phone. Simulation environments are used to model real mobile phones. This makes possible to execute software in a mobile phone that does not yet exist. The purpose of this thesis is to integrate Socket Server software component to Series 40 simulation environments on Linux and Windows platforms. Socket Server provides TCP/IP connectivity for applications. All other software and hardware components below Socket Server do not exist in simulation environments. The scope of this work is to clarify how that can be done without connectivity problems, including design, implementation and testing phases.

Sosiaalityö ja maahanmuuttajat. Lastensuojelun ammattilaisten ja asiakkaiden vuorovaikutus ja tulkinnat

Tutkimuksen tavoitteena oli tuottaa tietoa siitä, mitä maahanmuuttajia koskevat erityiskysymykset suomalaisessa lastensuojelun sosiaalityössä ovat ja miten näitä kysymyksiä lastensuojelussa käsitellään. Teoreettismetodologisena viitekehyksenä on sosiaalinen konstruktionismi. Etnisten suhteiden tutkimusperinteessä työ paikantuu keskusteluun, jossa kulttuuri ja etnisyys nähdään sosiaalisesti rakentuvina ja muuntuvina. Analyysissä sovelletaan diskurssianalyyttistä metodologiaa. Tutkimus rakentuu yhteenveto-osiosta ja neljästä artikkelista. Maahanmuuttajasosiaalityötä ja lastensuojelua tarkastellaan sosiaalityöntekijöiden, muiden ammattilaisten ja asiakkaiden kielenkäytön kautta. Aineisto koostuu 11 lastensuojelun asiakaskeskustelusta ja niiden jälkeen keskustelun osapuolille tehdyistä haastatteluista, joita on yhteensä 35. Tutkimuksessa analysoidaan seuraavia kysymyksiä: Miten sosiaalityöntekijät tulkitsevat maahanmuuttajasosiaalityön erityisyyttä oman ammatillisen tehtävänsä näkökulmasta? Minkälaisia ominaisuuksia sosiaalityöntekijät rakentavat maahanmuuttaja-asiakkaille? Miten lastensuojelun keskusteluissa puhutaan monikulttuurisuuteen liittyvistä teemoista, kuten erilaisuudesta ja samanlaisuudesta sekä kulttuuri- ja rasismikysymyksistä? Miten maahanmuuttajalasten ja -nuorten osallisuus lastensuojelun asiakaskeskusteluissa rakentuu aikuisten ja lasten itsensä tuottamana? Mitä ja miten maahanmuuttajalapset ja -nuoret puhuvat kokemuksistaan lastensuojelussa ja suomalaisessa yhteiskunnassa? Maahanmuuttajien erityiskysymyksiä ovat kieleen, kulttuuriin ja valtayhteiskunnan toimintaan liittyvät ymmärtämisvaikeudet, kokemukset arkipäivän rasismista sekä perheen ja yhteisön merkittävä, osin ristiriitainen rooli. Lapsilla ja nuorilla kulttuuri on muuntuvaa ja jatkuvien neuvottelujen kohteena. Aineiston lastensuojelutilanteiden taustalla on usein kouluympäristöön liittyviä vaikeuksia. Haastatteluissa lapset kertovat kokemuksistaan ja toimijuudestaan perheeseen, yhteisöön ja kouluun paikantuvissa tilanteissa. Asiakaskeskusteluissa lasten puhuja-asema on usein heikko, jos aikuiset eivät aktiivisesti vahvista sitä. Jotkut lapset ottavat itse vahvan puhuja-aseman. Asiakaskeskusteluissa maahanmuuttajien erityiskysymyksistä puhutaan harvoin eksplisiittisesti. Haastatteluissa sosiaalityöntekijät enemmän tai vähemmän tietoisesti paikantavat maahanmuuttajasosiaalityötä vieraannuttavaan, sopeuttavaan, tasa-arvoistavaan, kulttuuritietoiseen, rasismitietoiseen ja osallistavaan kehykseen. Kehykset nostavat sosiaalityön tavoitteista, menetelmistä ja asiakkaasta keskeisiksi erilaisia asioita. Tulkinnat ovat muuntuvia, vaikka osoittavat myös tiettyä säännönmukaisuutta. Kulttuuri on keskeinen käsite erilaisuuden ja samanlaisuuden ymmärtämiseksi. Sekä työntekijät että asiakkaat perustelevat toivottavia elämäntapoja "omalla kulttuurillaan" ja selittävät ongelmia ”erilaisella kulttuurilla”. Kulttuurin käsitettä voidaan myös käyttää työvälineenä asiakaskeskusteluissa avattaessa asiakkaan omaa näkökulmaa korostavaa dialogia. Perheen ja kulttuurisen yhteisön merkitys on tärkeää arvioida lapsen ja nuoren hyvinvoinnin ja kulttuurisen identiteetin kehittymisen näkökulmasta. Sosiaalityöntekijöillä on merkittävä välittäjän rooli yhtäältä valtayhteiskunnan ja maahanmuuttaja-asiakkaiden, toisaalta vanhempien, yhteisöjen sekä lasten ja nuorten välillä. Lastensuojelussa haasteena on arkipäivän rasismin tiedostaminen sekä siihen pureutuvien työmenetelmien kehittäminen.

Exploring the path through which career adaptability increases job satisfaction and lowers work stress : the role of affect

The construct of career adaptability, or the ability to successfully manage one's career development and challenges, predicts several important outcomes; however, little is known about the mechanisms contributing to its positive effects. The present study investigated the impact of career adaptability on job satisfaction and work stress, as mediated by individuals' affective states. Using a representative sample of 1671 individuals employed in Switzerland we hypothesized that, over time, career adaptability amplifies job satisfaction and attenuates work stress, through higher positive affect and lower negative affect, respectively. The data resulted from the first three waves of a longitudinal project on professional paths conducted in Switzerland. For each wave, participants completed a survey. Results of the 3-wave cross-lagged longitudinal model show that employees with higher career adaptability at Time 1 indeed experienced at Time 3 higher job satisfaction and lower work stress than those with lower career adaptability. The effect of career adaptability on job satisfaction and work stress was accounted for by negative affect: Individuals higher on career adaptability experienced less negative affect, which led to lower levels of stress and higher levels of job satisfaction, beyond previous levels of job satisfaction and work stress. Overall results support the conception of career adaptability as a self-regulatory resource that may promote a virtuous cycle in which individuals' evaluations of their resources to cope with the environment (i.e., career adaptability) shape their affective states, which in turn influence the evaluations of their job.

Operational Reliability Analysis of a Three-Tiered Thin-Client ERP-system in an International Corporate Environment

Internationalization and the following rapid growth have created the need to concentrate the IT systems of many small-to-medium-sized production companies. Enterprise Resource Planning systems are a common solution for such companies. Deployment of these ERP systems consists of many steps, one of which is the implementation of the same shared system at all international subsidiaries. This is also one of the most important steps in the internationalization strategy of the company from the IT point of view. The mechanical process of creating the required connections for the off-shore sites is the easiest and most well-documented step along the way, but the actual value of the system, once operational, is perceived in its operational reliability. The operational reliability of an ERP system is a combination of many factors. These factors vary from hardware- and connectivity-related issues to administrative tasks and communication between decentralized administrative units and sites. To accurately analyze the operational reliability of such system, one must take into consideration the full functionality of the system. This includes not only the mechanical and systematic processes but also the users and their administration. All operational reliability in an international environment relies heavily on hardware and telecommunication adequacy so it is imperative to have resources dimensioned with regard to planned usage. Still with poorly maintained communication/administration schemes no amount of bandwidth or memory will be enough to maintain a productive level of reliability. This thesis work analyzes the implementation of a shared ERP system to an international subsidiary of a Finnish production company. The system is Microsoft Dynamics Ax, currently being introduced to a Slovakian facility, a subsidiary of Peikko Finland Oy. The primary task is to create a feasible base of analysis against which the operational reliability of the system can be evaluated precisely. With a solid analysis the aim is to give recommendations on how future implementations are to be managed.