Erratum of initial paper: Postmortem computed tomography angiography vs. conventional autopsy: advantages and inconveniences of each method.

PURPOSE: Postmortem computed tomography angiography (PMCTA) was introduced into forensic investigations a few years ago. It provides reliable images that can be consulted at any time. Conventional autopsy remains the reference standard for defining the cause of death, but provides only limited possibility of a second examination. This study compares these two procedures and discusses findings that can be detected exclusively using each method. MATERIALS AND METHODS: This retrospective study compared radiological reports from PMCTA to reports from conventional autopsy for 50 forensic autopsy cases. Reported findings from autopsy and PMCTA were extracted and compared to each other. PMCTA was performed using a modified heart-lung machine and the oily contrast agent Angiofil® (Fumedica AG, Muri, Switzerland). RESULTS: PMCTA and conventional autopsy would have drawn similar conclusions regarding causes of death. Nearly 60 % of all findings were visualized with both techniques. PMCTA demonstrates a higher sensitivity for identifying skeletal and vascular lesions. However, vascular occlusions due to postmortem blood clots could be falsely assumed to be vascular lesions. In contrast, conventional autopsy does not detect all bone fractures or the exact source of bleeding. Conventional autopsy provides important information about organ morphology and remains the only way to diagnose a vital vascular occlusion with certitude. CONCLUSION: Overall, PMCTA and conventional autopsy provide comparable findings. However, each technique presents advantages and disadvantages for detecting specific findings. To correctly interpret findings and clearly define the indications for PMCTA, these differences must be understood.

Lastaus- ja jakelutoiminnan kehittäminen paperitehtaalla

Stora Enso Oyj:n Anjalan paperitehdas on vuoden 2008 alussa muutosten keskellä; tehtaalla pysäytetään yksi paperikone, ja samalla kahden käyntiin jäävän paperikoneen tuoteportfoliota muutetaan. Näin ollen tehtaalla on tarve päivittää logistista strategiaa ja kehittää tehtaan lähtölogistiikan toimintoja. Tämän diplomityön tavoitteena oli määrittää Anjalan paperitehtaan lastausaseman resurssit tehtaalla toteutettavan rakennemuutoksen jälkeisessä tilanteessa sekä tuoda esille ja pohtia tehtaan lähtölogistiikan toimintojen mahdollisia kehitystoimenpiteitä. Työssä pohdittiin rakennemuutoksen vaikutuksia lastausaseman resursseihin niin auto- kuin junalastauksenkin osalta sekä käsiteltiin mahdollisia logististen järjestelyjen kehitystoimenpiteitä. Lastausaseman resurssit todettiin riittäviksi. Keskeisimmiksi ja tärkeimmiksi kehitystoimenpiteiksi työssä nähtiin tehdas-satama -toimituksissa käytettävien autokuljetusten määrän kasvattaminen, Stora Enson systeemiliikenteen junalastausten kehittäminen sekä Anjalan paperitehtaan ja Inkeroisten kartonkitehtaan yhteisen kuljetussuunnittelijan toimen käynnistäminen.

Dual-Energy CT: Basic Principles, Technical Approaches, and Applications in Musculoskeletal Imaging (Part 1).

In recent years, technological advances have allowed manufacturers to implement dual-energy computed tomography (DECT) on clinical scanners. With its unique ability to differentiate basis materials by their atomic number, DECT has opened new perspectives in imaging. DECT has been used successfully in musculoskeletal imaging with applications ranging from detection, characterization, and quantification of crystal and iron deposits; to simulation of noncalcium (improving the visualization of bone marrow lesions) or noniodine images. Furthermore, the data acquired with DECT can be postprocessed to generate monoenergetic images of varying kiloelectron volts, providing new methods for image contrast optimization as well as metal artifact reduction. The first part of this article reviews the basic principles and technical aspects of DECT including radiation dose considerations. The second part focuses on applications of DECT to musculoskeletal imaging including gout and other crystal-induced arthropathies, virtual noncalcium images for the study of bone marrow lesions, the study of collagenous structures, applications in computed tomography arthrography, as well as the detection of hemosiderin and metal particles.

Dual-Energy CT: Basic Principles, Technical Approaches, and Applications in Musculoskeletal Imaging (Part 2).

In recent years, technological advances have allowed manufacturers to implement dual-energy computed tomography (DECT) on clinical scanners. With its unique ability to differentiate basis materials by their atomic number, DECT has opened new perspectives in imaging. DECT has been successfully used in musculoskeletal imaging with applications ranging from detection, characterization, and quantification of crystal and iron deposits, to simulation of noncalcium (improving the visualization of bone marrow lesions) or noniodine images. Furthermore, the data acquired with DECT can be postprocessed to generate monoenergetic images of varying kiloelectron volts, providing new methods for image contrast optimization as well as metal artifact reduction. The first part of this article reviews the basic principles and technical aspects of DECT including radiation dose considerations. The second part focuses on applications of DECT to musculoskeletal imaging including gout and other crystal-induced arthropathies, virtual noncalcium images for the study of bone marrow lesions, the study of collagenous structures, applications in computed tomography arthrography, as well as the detection of hemosiderin and metal particles.

Comparison of Griffiths-II and Bayley-II tests for the developmental assessment of high-risk infants.

INTRODUCTION: Two important risk factors for abnormal neurodevelopment are preterm birth and neonatal hypoxic ischemic encephalopathy. The new revisions of Griffiths Mental Development Scale (Griffiths-II, [1996]) and the Bayley Scales of Infant Development (BSID-II, [1993]) are two of the most frequently used developmental diagnostics tests. The Griffiths-II is divided into five subscales and a global development quotient (QD), and the BSID-II is divided into two scales, the Mental scale (MDI) and the Psychomotor scale (PDI). The main objective of this research was to establish the extent to which developmental diagnoses obtained using the new revisions of these two tests are comparable for a given child. MATERIAL AND METHODS: Retrospective study of 18-months-old high-risk children examined with both tests in the follow-up Unit of the Clinic of Neonatology of our tertiary care university Hospital between 2011 and 2012. To determine the concurrent validity of the two tests paired t-tests and Pearson product-moment correlation coefficients were computed. Using the BSID-II as a gold standard, the performance of the Griffiths-II was analyzed with receiver operating curves. RESULTS: 61 patients (80.3% preterm, 14.7% neonatal asphyxia) were examined. For the BSID-II the MDI mean was 96.21 (range 67-133) and the PDI mean was 87.72 (range 49-114). For the Griffiths-II, the QD mean was 96.95 (range 60-124), the locomotors subscale mean was 92.57 (range 49-119). The score of the Griffiths locomotors subscale was significantly higher than the PDI (p<0.001). Between the Griffiths-II QD and the BSID-II MDI no significant difference was found, and the area under the curve was 0.93, showing good validity. All correlations were high and significant with a Pearson product-moment correlation coefficient >0.8. CONCLUSIONS: The meaning of the results for a given child was the same for the two tests. Two scores were interchangeable, the Griffiths-II QD and the BSID-II MDI.

Offshore Sourcing in Software Development: Case Studies of Finnish-Russian Cooperation

The study examines international cooperation in product development in software development organisations. The software industry is known for its global nature and knowledge-intensity, which makes it an interesting setting to examine international cooperation in. Software development processes are increasingly distributed worldwide, but for small or even medium-sized enterprises, typical for the software industry, such distribution of operations is often possible only in association with crossing the company’s boundaries. The strategic decision-making of companies is likely to be affected by the characteristics of the industry, and this includes decisions about cooperation or sourcing. The objective of this thesis is to provide a holistic view on factors affecting decisions about offshore sourcing in software development. Offshore sourcing refers to a cooperative mode of offshoring, where a firm does not establish its own presence in a foreign country, but utilises a local supplier. The study examines product development activities that are distributed across organisational and geographical boundaries. The objective can be divided into two subtopics: general reasons for international cooperation in product development and particular reasons for cooperation between Finnish and Russian companies. The focus is on the strategic rationale at the company level, in particular in small and medium-sized enterprises. The theoretical discourse of the study builds upon the literature on international cooperation and networking, with particular focus on cooperation with foreign suppliers and within product development activities. The resource-based view is also discussed, as heterogeneity and interdependency of the resources possessed by different firms are seen as factors motivating international cooperation. Strategically, sourcing can be used to access resources possessed by an industrial network, to enhance the product development of a firm, or to optimise its cost structure. In order to investigate the issues raised by the theoretical review, two empirical studies on international cooperation in software product development have been conducted. The emphasis of the empirical part of the study is on cooperation between Finnish and Russian companies. The data has been gathered through four case studies on Finnish software development organisations and four case studies on Russian offshore suppliers. Based on the material from the case studies, a framework clarifying and grouping the factors that influence offshore sourcing decisions has been built. The findings indicate that decisions regarding offshore sourcing in software development are far more complex than generally assumed. The framework provides a holistic view on factors affecting decisions about offshore sourcing in software development, capturing the multidimensionality of motives for entering offshore cooperation. Four groups of factors emerged from the data: A) strategy-related aspects, B) aspects related to resources and capabilities, C) organisation-related aspects, and D) aspects related to the entrepreneur or management. By developing a holistic framework of decision factors, the research offers in-depth theoreticalunderstanding of offshore sourcing rationale in product development. From the managerial point of view, the proposed framework sums up the issues that a firm should pay attention to when contemplating product development cooperation with foreign suppliers. Understanding different components of sourcing decisions can lead to improved preconditions for strategising and engaging in offshore cooperation. A thorough decisionmaking process should consider all the possible benefits and risks of product development cooperation carefully.

Market Opportunities for Paper Industry in Radio Frequency Identification

The paper industry has been experiencing remarkable structural changes since paper demand growth has ceased and some markets are declining. One reason behind the declined demand is the Internet, which has partially substituted the newspaper as a source of information. Paper products alone can no longer provide livelihood, and the paper industry has to find new business areas. In this research, we studied radio frequency identification (RFID), and the market opportunities it could provide for paper industry. The research combined a quantitative industry analysis and qualitative interviews. RFID is a growing industry in the beginning of its life cycle, in which value chains and technologies still evolve significantly. The industry is going to concentrate on the future, and in the long term RFID-identifiers will probably be printed on paper substrate or directly onto products. Paper industry has the chance to enter the RFID industry, but it has to obtain the required competences, for example through acquisitions. The business potential RFID offers to paper industry is inadequate, and while reviewing new strategic options, the paper industry must consider more options, for example the entire printed intelligence.

Venäläisten yritysten kansainvälistyminen

Tämän kandidaatintyön tavoitteena on selvittää ja analysoida venäläisten yritysten kansainvälistymistä investointien näkökulmasta. Aihetta tutkittiin Venäjältä ulospäin suuntautuneiden investointien valossa. Kansainvälistymistä analysoitiin konkreettisten yritysesimerkkien kautta. Työssä käytettiin lähteinä aikaisempia aiheesta tehtyjä tutkimuksia sekä esimerkkeinä olevien yritysten internetsivuja. Venäläisten yritysten kansainvälistyminen alkoi toden teolla vasta Neuvostoliiton hajoamisen jälkeen. Käytännössä yritysten kansainvälistyminen on lähtenyt kasvuun vasta 2000-luvulla. Viime vuosien aikana Venäjä on ollut yksi suurimmista ulospäin investoijista nousevien markkinatalouksien joukossa. Suurimmat Venäjältä ulospäin investoijat toimivat öljy- ja kaasuteollisuudessa sekä metalli- ja kaivosteollisuudessa. Kyseiset teollisuudenalat ovat riippuvaisia raaka-aineiden maailmanmarkkinahinnoista. Vuoden 2008 lopulla alkanut talouskriisi on alentanut raaka-aineiden hintoja ja näin vaikuttanut yritysten toimintaan. Yritykset ovat joutuneet talousvaikeuksiin, joka on vaikuttanut myös niiden investointeihin ulkomaille. Tällä hetkellä Venäjä on riippuvainen luonnonvaroihin perustuvista teollisuudenaloista, mutta tulevaisuudessa uusilla yrityksillä on mahdollisuuksia nousta kansainvälisien yritysten joukkoon. Raaka-aineiden hintojen kääntyessä jälleen nousuun myös luonnonvaroihin perustuvat yritykset tulevat nousemaan ahdingosta ja jatkamaan kansainvälistymistä.

Design Process of Packaging Laboratory at Lappeenranta University of Technology

The layout design process of the packaging laboratory at Lappeenranta University of Technology is documented in this thesis. Layout planning methods are discussed in general. The systematic layout planning procedure is presented in more detail as it is utilised in the case of layout planning of the packaging laboratory. General demands for research laboratory are discussed both from the machine and product perspectives. The possibilities for commercial food processing in the laboratory are discussed from the point of view of foodstuff processing regulations and hygiene demands. The layout planning process is documented and different layout possibilities are presented. Different layout drafts are evaluated and one layout draft is developed to be the final layout of the packaging laboratory. Guideline for technical planning and implementation based on the final layout is given

Analyzing customer profitability: an empirical study

The purpose of this study was to define the customer profitability of the case company as well as to specify the factors that explain customer profitability. The study was made with a quantitative research method. The research hypotheses were formulated mainly on the grounds of previous research, and were tested with statistical research methods. The research results showed that customer profitability is not equally distributed among the customers of the case company, and the majority of its customers is profitable. The interpreters for absolute customer profitability were sales volume and the customer’s location region. The interpreters for relative customer profitability were the customer’s location region and the product segment into which a customer can be classified on the basis of the products that were sold to this customer.

Electrical machine in a Hybrid Electrical Vehicle

Hybrid electric vehicles (HEV) have attracted very much attention during the latest years. Increasing environmental concern and an increase in fuel prices are key factors for the growing interest towards the HEV. In a hybrid electric vehicle the power train consists of both a mechanical power system and an electric power transmission system. The major subsystems in the mechanical power system are the internal combustion engine which powers the vehicle; electric power transmission including an energy storage, power electronic inverter, hybrid control system; the electric motor drive that runs either in the generating mode or in the motoring mode to process the power flow between the energy storage and the electrical machine. This research includes two advanced electric motors for a parallel hybrid: induction machine and permanent magnets synchronous machine. In the thesis an induction motor and a permanent magnet motor are compared as propulsion motors. Electric energy storages are also studied.

Mikkelin seudun teknologiayritysten kilpailukyvyn parantaminen verkostoitumisen avulla

Diplomityön tavoitteena on parantaa Mikkelin seudun teknologiayritysten kilpailukykyä verkostoitumisen avulla. Lisäksi tavoitteena on toteuttaa konkreettinen verkostoitumisprosessi ja luoda malli verkostoitumishankkeen toteuttamiseksi. Työ koostuu verkostoitumiseen liittyvästä kirjallisuuskatsauksesta ja työn ohessa toteutetuista käytännön toimenpiteistä. Kohderyhmäksi valittuihin puutuoteteollisuuden kone- ja laitevalmistajiin on perehdytty haastattelujen ja arvojärjestelmäanalyysin perusteella. Yrityksiltä on lisäksi haastattelujen yhteydessä kerätty verkostoitumisaloitteita, joiden perusteella on tehty tarvittavia jatkotoimenpiteitä. Työn tuloksena on luotu kuvaus kohdeyritysten arvojärjestelmästä Mikkelin seudulla ja edesautettu kolmen verkostoitumisprosessien käynnistymistä. Lisäksi kokemusten ja havaintojen perusteella on luotu verkostoitumismalli alueellisen kehittäjäorganisaation käyttöön.

Sopimusvalmistajan tarjouslaskentamallin kehittäminen monituoteympäristöön

Työn tavoitteena oli luoda yhtenäinen, tehokas ja helppokäyttöinen tarjouslaskentamalli sopimusvalmistajan käyttöön. Konsernin käytössä oli aiemmin neljä erilaista tarjouslaskentamallia ja niitä oli erittäin vaikea vertailla keskenään, eikä niillä voitu laskea tarjouksia kaikille tehtaille. Työ jakautuu kirjallisuuskatsaukseen ja empiiriseen osaan. Kirjallisuuskatsauksessa käsitellään erilaisia hinnoitteluvaihtoehtoja, kustannuslaskennan roolia ja kustannuslaskentamenetelmiä. Empiirinen osa koostuu tarjouslaskennan nykytilan analysoinnista, uuden tarjouslaskentamallin rakentamisesta sekä kehitetyn tarjouslaskentamallin toimintakuvauksesta. Tarjouslaskentamallin pohjaksi valittiin kustannusperusteinen hinnoittelu, koska sitä oli käytetty aikaisemminkin ja se oli koettu hyväksi. Kustannusperusteisen tarjouslaskentamallin pohjaksi luotiin yhtenäiset työ – ja konetuntihinnat koko konserniin. Konetuntihinnat laskettiin 28 koneelle. Konetuntihintoja analysoitiin ja ryhmiteltiin siten, että päädyttiin 16 konelisän käyttöön. Tarjouslaskentamalli käsittelee vain valmistuksen kustannuksia eikä ota kantaa hallintokustannusten syntyyn. Yhtenäinen tarjouslaskentamalli helpottaa eri myyntimiesten tekemien tarjousten vertailua ja mahdollistaa tuotteiden myynnin useille tehtaille. Tarjouslaskentamalli toteutettiin taulukkolaskentaohjelmalla.

The influence of crystallization conditions on the filtration characteristics of sulphathiazole suspensions

Cooling crystallization is one of the most important purification and separation techniques in the chemical and pharmaceutical industry. The product of the cooling crystallization process is always a suspension that contains both the mother liquor and the product crystals, and therefore the first process step following crystallization is usually solid-liquid separation. The properties of the produced crystals, such as their size and shape, can be affected by modifying the conditions during the crystallization process. The filtration characteristics of solid/liquid suspensions, on the other hand, are strongly influenced by the particle properties, as well as the properties of the liquid phase. It is thus obvious that the effect of the changes made to the crystallization parameters can also be seen in the course of the filtration process. Although the relationship between crystallization and filtration is widely recognized, the number of publications where these unit operations have been considered in the same context seems to be surprisingly small. This thesis explores the influence of different crystallization parameters in an unseeded batch cooling crystallization process on the external appearance of the product crystals and on the pressure filtration characteristics of the obtained product suspensions. Crystallization experiments are performed by crystallizing sulphathiazole (C9H9N3O2S2), which is a wellknown antibiotic agent, from different mixtures of water and n-propanol in an unseeded batch crystallizer. The different crystallization parameters that are studied are the composition of the solvent, the cooling rate during the crystallization experiments carried out by using a constant cooling rate throughout the whole batch, the cooling profile, as well as the mixing intensity during the batch. The obtained crystals are characterized by using an automated image analyzer and the crystals are separated from the solvent through constant pressure batch filtration experiments. Separation characteristics of the suspensions are described by means of average specific cake resistance and average filter cake porosity, and the compressibilities of the cakes are also determined. The results show that fairly large differences can be observed between the size and shape of the crystals, and it is also shown experimentally that the changes in the crystal size and shape have a direct impact on the pressure filtration characteristics of the crystal suspensions. The experimental results are utilized to create a procedure that can be used for estimating the filtration characteristics of solid-liquid suspensions according to the particle size and shape data obtained by image analysis. Multilinear partial least squares regression (N-PLS) models are created between the filtration parameters and the particle size and shape data, and the results presented in this thesis show that relatively obvious correlations can be detected with the obtained models.

Medidas de tensão superficial pelo método de contagem de gotas: descrição do método e experimentos com tensoativos não-iônicos etoxilados

Surface tension knowledge of surfactants aqueous solutions is important during amphiphilic molecule manufacturing and new product development, as feedback information to handle synthesis parameters to target performance. Drop counting method is an interesting simplification of drop weight method for surface tension measurements. A simple laboratory measurement device, with capability for temperature control, was assembled to allow investigation of ethoxylated surfactants. The implementation of the method was preceded by a detailed investigation of two factors that may affect the measured surface tension: drop formation velocity and surfactant ethoxylation degree. The limitations of the method are discussed on this basis.