The performance of four molecular methods for the laboratory diagnosis of congenital toxoplasmosis in amniotic fluid samples

Introduction Toxoplasmosis may be life-threatening in fetuses and in immune-deficient patients. Conventional laboratory diagnosis of toxoplasmosis is based on the presence of IgM and IgG anti-Toxoplasma gondii antibodies; however, molecular techniques have emerged as alternative tools due to their increased sensitivity. The aim of this study was to compare the performance of 4 PCR-based methods for the laboratory diagnosis of toxoplasmosis. One hundred pregnant women who seroconverted during pregnancy were included in the study. The definition of cases was based on a 12-month follow-up of the infants. Methods Amniotic fluid samples were submitted to DNA extraction and amplification by the following 4 Toxoplasma techniques performed with parasite B1 gene primers: conventional PCR, nested-PCR, multiplex-nested-PCR, and real-time PCR. Seven parameters were analyzed, sensitivity (Se), specificity (Sp), positive predictive value (PPV), negative predictive value (NPV), positive likelihood ratio (PLR), negative likelihood ratio (NLR) and efficiency (Ef). Results Fifty-nine of the 100 infants had toxoplasmosis; 42 (71.2%) had IgM antibodies at birth but were asymptomatic, and the remaining 17 cases had non-detectable IgM antibodies but high IgG antibody titers that were associated with retinochoroiditis in 8 (13.5%) cases, abnormal cranial ultrasound in 5 (8.5%) cases, and signs/symptoms suggestive of infection in 4 (6.8%) cases. The conventional PCR assay detected 50 cases (9 false-negatives), nested-PCR detected 58 cases (1 false-negative and 4 false-positives), multiplex-nested-PCR detected 57 cases (2 false-negatives), and real-time-PCR detected 58 cases (1 false-negative). Conclusions The real-time PCR assay was the best-performing technique based on the parameters of Se (98.3%), Sp (100%), PPV (100%), NPV (97.6%), PLR (â^ž), NLR (0.017), and Ef (99%).

Synthesis, multiscale-multiphase characterization and applications of thiophene-based biohybrids

Biohybrid derivatives of π-conjugated materials are emerging as powerful tools to study biological events through the (opto)electronic variations of the π-conjugated moieties, as well as to direct and govern the self-assembly properties of the organic materials through the organization principles of the bio component. So far, very few examples of thiophene-based biohybrids have been reported. The aim of this Ph. D thesis has been the development of oligothiophene-oligonucleotide hybrid derivatives as tools, on one side, to detect DNA hybridisation events and, on the other, as model compounds to investigate thiophene-nucleobase interactions in the solid state. To obtain oligothiophene bioconjugates with the required high level of purity, we first developed new synthetic ecofriendly protocols for the synthesis of thiophene oligomers. Our innovative heterogeneous Suzuki coupling methodology, carried out in EtOH/water or isopropanol under microwave irradiation, allowed us to obtain alkyl substituted oligothiophenes and thiophene based co-oligomers in high yields and very short reaction times, free from residual metals and with improved film forming properties. These methodologies were subsequently applied in the synthesis of oligothiophene-oligonucleotide conjugates. Oligothiophene-5-labeled deoxyuridines were synthesized and incorporated into 19-meric oligonucletide sequences. We showed that the oligothiophene-labeled oligonucletide sequences obtained can be used as probes to detect a single nucleotide polymorphism (SNP) in complementary DNA target sequences. In fact, all the probes showed marked variations in emission intensity upon hybridization with a complementary target sequence. The observed variations in emitted light were comparable or even superior to those reported in similar studies, showing that the biohybrids can potentially be useful to develop biosensors for the detection of DNA mismatches. Finally, water-soluble, photoluminescent and electroactive dinucleotide-hybrid derivatives of quaterthiophene and quinquethiophene were synthesized. By means of a combination of spectroscopy and microscopy techniques, electrical characterizations, microfluidic measurements and theoretical calculations, we were able to demonstrate that the self-assembly modalities of the biohybrids in thin films are driven by the interplay of intra and intermolecular interactions in which the π-stacking between the oligothiophene and nucleotide bases plays a major role.

Intrinsic uncoupling in the ATP synthase of Escherichia coli. Studies on WT and ε-truncated mutants

The H+/ATP ratio in the catalysis of ATP synthase has generally been considered a fixed parameter. However, Melandri and coworkers have recently shown that, in the ATP synthase of the photosynthetic bacterium Rb.capsulatus, this ratio can significantly decrease during ATP hydrolysis when the concentration of either ADP or Pi is maintained at a low level (Turina et al., 2004). The present work has dealt with the ATP synthase of E.coli, looking for evidence of this phenomenon of intrinsic uncoupling in this organism as well. First of all, we have shown that the DCCD-sensitive ATP hydrolysis activity of E.coli internal membranes was strongly inhibited by ADP and Pi, with a half-maximal effect in the submicromolar range for ADP and at 140 µM for Pi. In contrast to this monotonic inhibition, however, the proton pumping activity of the enzyme, as estimated under the same conditions by the fluorescence quenching of the ΔpH-sensitive probe ACMA, showed a clearly biphasic progression, both for Pi, increasing from 0 up to approximately 200 µM, and for ADP, increasing from 0 up to a few µM. We have interpreted these results as indicating that the occupancy of ADP and Pi binding sites shifts the enzyme from a partially uncoupled state to a fully coupled state, and we expect that the ADP- and Pi-modulated intrinsic uncoupling is likely to be a general feature of prokaryotic ATP synthases. Moreover, the biphasicity of the proton pumping data suggested that two Pi binding sites are involved. In order to verify whether the same behaviour could be observed in the isolated enzyme, we have purified the ATP synthase of E.coli and reconstituted it into liposomes. Similarly as observed in the internal membrane preparation, in the isolated and reconstituted enzyme it was possible to observe inhibition of the hydrolytic activity by ADP and Pi (with half-maximal effects at few µM for ADP and at 400 µM for Pi) with a concomitant stimulation of proton pumping. Both the inhibition of ATP hydrolysis and the stimulation of proton pumping as a function of Pi were lost upon ADP removal by an ADP trap. These data have made it possible to conclude that the results obtained in E.coli internal membranes are not due to the artefactual interference of enzymatic activities other than the ones of the ATP synthase. In addition, data obtained with liposomes have allowed a calibration of the ACMA signal by ΔpH transitions of known extent, leading to a quantitative evaluation of the proton pumping data. Finally, we have focused our efforts on searching for a possible structural candidate involved in the phenomenon of intrinsic uncoupling. The ε-subunit of the ATP-synthase is known as an endogenous inhibitor of the hydrolysis activity of the complex and appears to undergo drastic conformational changes between a non-inhibitory form (down-state) and an inhibitory form (up-state)(Rodgers & Wilce, 2000; Gibbons et al., 2000). In addition, the results of Cipriano & Dunn (2006) indicated that the C-terminal domain of this subunit played an important role in the coupling mechanism of the pump, and those of Capaldi et al. (2001), Suzuki et al. (2003) were consistent with the down-state showing a higher hydrolysis-to-synthesis ratio than the up-state. Therefore, we decided to search for modulation of pumping efficiency in a C-terminally truncated ε mutant. A low copy number expression vector has been built, carrying an extra copy of uncC, with the aim of generating an ε-overexpressing E.coli strain in which normal levels of assembly of the mutated ATP-synthase complex would be promoted. We have then compared the ATP hydrolysis and the proton pumping activity in membranes prepared from these ε-overexpressing E.coli strains, which carried either the WT ε subunit or the ε88-stop truncated form. Both strains yielded well energized membranes. Noticeably, they showed a marked difference in the inhibition of hydrolysis by Pi, this effect being largely lost in the truncated mutant. However, pre-incubation of the mutated enzyme with ADP at low nanomolar concentrations (apparent Kd = 0.7nM) restored the hydrolysis inhibition, together with the modulation of intrinsic uncoupling by Pi, indicating that, contrary to wild-type, during membrane preparation the truncated mutant had lost the ADP bound at this high-affinity site, evidently due to a lower affinity (and/or higher release) for ADP of the mutant relative to wild type. Therefore, one of the effects of the C-terminal domain of ε appears to be to modulate the affinity of at least one of the binding sites for ADP. The lack of this domain does not appear so much to influence the modulability of coupling efficiency, but instead the extent of this modulation. At higher preincubated ADP concentrations (apparent Kd = 117nM), the only observed effects were inhibition of both hydrolysis and synthesis, providing a direct proof that two ADP-binding sites on the enzyme are involved in the inhibition of hydrolysis, of which only the one at higher affinity also modulates the coupling efficiency.

Design and development of new green catalytic methodologies for the synthesis of enantiomerically enriched molecules

The following Ph.D work was mainly focused on catalysis, as a key technology, to achieve the objectives of sustainable (green) chemistry. After introducing the concepts of sustainable (green) chemistry and an assessment of new sustainable chemical technologies, the relationship between catalysis and sustainable (green) chemistry was briefly discussed and illustrated via an analysis of some selected and relevant examples. Afterwards, as a continuation of the ongoing interest in Dr. Marco Bandini’s group on organometallic and organocatalytic processes, I addressed my efforts to the design and development of novel catalytic green methodologies for the synthesis of enantiomerically enriched molecules. In the first two projects the attention was focused on the employment of solid supports to carry out reactions that still remain a prerogative of omogeneous catalysis. Firstly, particular emphasis was addressed to the discovery of catalytic enantioselective variants of nitroaldol condensation (commonly termed Henry reaction), using a complex consisting in a polyethylene supported diamino thiopene (DATx) ligands and copper as active species. In the second project, a new class of electrochemically modified surfaces with DATx palladium complexes was presented. The DATx-graphite system proved to be efficient in promoting the Suzuki reaction. Moreover, in collaboration with Prof. Wolf at the University of British Columbia (Vancouver), cyclic voltammetry studies were reported. This study disclosed new opportunities for carbon–carbon forming processes by using heterogeneous, electrodeposited catalyst films. A straightforward metal-free catalysis allowed the exploration around the world of organocatalysis. In fact, three different and novel methodologies, using Cinchona, Guanidine and Phosphine derivatives, were envisioned in the three following projects. An interesting variant of nitroaldol condensation with simple trifluoromethyl ketones and also their application in a non-conventional activation of indolyl cores by Friedel-Crafts-functionalization, led to two novel synthetic protocols. These approaches allowed the preparation of synthetically useful trifluoromethyl derivatives bearing quaternary stereocenters. Lastly, in the sixth project the first γ-alkylation of allenoates with conjugated carbonyl compounds was envisioned. In the last part of this Ph.D thesis bases on an extra-ordinary collaboration with Prof. Balzani and Prof. Gigli, I was involved in the synthesis and characterization of a new type of heteroleptic cyclometaled-Ir(III) complexes, bearing bis-oxazolines (BOXs) as ancillary ligands. The new heteroleptic complexes were fully characterized and in order to examine the electroluminescent properties of FIrBOX(CH2), an Organic Light Emitting Device was realized.

Liquid crystalline oligofluorenes and their derivatives

Homo-oligofluorenes (OFn), polyfluorenes (PF2/6) and oligofluorenes with one fluorenenone group in the center (OFnK) were synthesized. They were used as model compounds to understand of the structure-property relationships of polyfluorenes and the origin of the green emission in the photoluminescence (after photooxidation of the PFs) and the electroluminescence (EL) spectra. The electronic, electrochemical properties, thermal behavior, supramolecular self-assembly, and photophysical properties of OFn, PF2/6 and OFnK were investigated. Oligofluorenes with 2-ethylhexyl side chain (OF2-OF7) from the dimer up to the heptamer were prepared by a series of stepwise transition metal mediated Suzuki and Yamamoto coupling reactions. Polyfluorene was synthesized by Yamamoto coupling of 2,7-dibromo-9,9-bis(2-ethylhexyl)fluorene. Oligofluorenes with one fluorenone group in the center (OF3K, OF5K, OF7K) were prepared by Suzuki coupling between the monoboronic fluorenyl monomer, dimer, trimer and 2, 7-dibromofluorenone. The electrochemical and electronic properties of homo-oligofluorenes (OFn) were systematically studied by several combined techniques such as cyclic voltammetry, differential pulse voltammetry, UV-vis absorption spectroscopy, steady and time-resolved fluorescence spectroscopy. It was found that the oligofluorenes behave like classical conjugated oligomers, i.e., with the increase of the chain-length, the corresponding oxidation potential, the absorption and emission maximum, ionization potential, electron affinity, band gap and the photoluminescence lifetime displayed a very good linear relation with the reciprocal number of the fluorene units (1/n). The extrapolation of these linear relations to infinite chain length predicted the electrochemical and electronic properties of the corresponding polyfluorenes. The thermal behavior, single-crystal structure and supramolecular packing, alignment properties, and molecular dynamics of the homo-oligofluorenes (OFn) up to the polymer were studied using techniques such as TGA, DSC, WAXS, POM and DS. The OFn from tetramer to heptamer show a smectic liquid crystalline phase with clearly defined isotropization temperature. The oligomers do show a glass transition which exhibits n-1 dependence and allows extrapolation to a hypothetical glass transition of the polymer at around 64 °C. A smectic packing and helix-like conformation for the oligofluorenes from tetramer to heptamer was supported by WAXS experiments, simulation, and single-crystal structure of some oligofluorene derivatives. Oligofluorenes were aligned more easily than the corresponding polymer, and the alignability increased with the molecular length from tetramer to heptamer. The molecular dynamics in a series of oligofluorenes up to the polymer was studied using dielectric spectroscopy. The photophysical properties of OFn and PF2/6 were investigated by the steady-state spectra (UV-vis absorption and fluorescence spectra) and time-resolved fluorescence spectra both in solution and thin film. The time-resolved fluorescence spectra of the oligofluorenes were measured by streak camera and gate detection technique. The lifetime of the oligofluorenes decreased with the extension of the chain-length. No green emission was observed in CW, prompt and delayed fluorescence for oligofluorenes in m-THF and film at RT and 77K. Phosphorescence was observed for oligofluorenes in frozen dilute m-THF solution at 77K and its lifetime increased with length of oligofluorenes. A linear relation was obtained for triplet energy and singlet energy as a function of the reciprocal degree of polymerization, and the singlet-triplet energy gap (S1-T1) was found to decrease with the increase of degree of polymerization. Oligofluorenes with one fluorenone unit at the center were used as model compounds to understand the origin of the low-energy (“green”) emission band in the photoluminescence and electroluminescence spectra of polyfluorenes. Their electrochemical properties were investigated by CV, and the ionization potential (Ip) and electron affinity (Ea) were calculated from the onset of oxidation and reduction of OFnK. The photophysical properties of OFnK were studied in dilute solution and thin film by steady-state spectra and time-resolved fluorescence spectra. A strong green emission accompanied with a weak blue emission were obtained in solution and only green emission was observed on film. The strong green emission of OFnK suggested that rapid energy transfer takes place from higher energy sites (fluorene segments) to lower energy sites (fluorenone unit) prior to the radiative decay of the excited species. The fluorescence spectra of OFnK also showed solvatochromism. Monoexponential decay behaviour was observed by time-resolved fluorescence measurements. In addition, the site-selective excitation and concentration dependence of the fluorescence spectra were investigated. The ratio of green and blue emission band intensities increases with the increase of the concentration. The observed strong concentration dependence of the green emission band in solution suggests that increased interchain interactions among the fluorenone-containing oligofluorene chain enhanced the emission from the fluorenone defects at higher concentration. On the other hand, the mono-exponential decay behaviour and power dependence were not influenced significantly by the concentration. We have ruled out the possibility that the green emission band originates from aggregates or excimer formation. Energy transfer was further investigated using a model system of a polyfluorene doped by OFnK. Förster-type energy transfer took place from PF2/6 to OFnK, and the energy transfer efficiency increased with increasing of the concentration of OFnK. Efficient funneling of excitation energy from the high-energy fluorene segments to the low-energy fluorenone defects results from energy migration by hopping of excitations along a single polymer chain until they are trapped on the fluorenone defects on that chain or transferred onto neighbouring chains by Förster-type interchain energy transfer process. These results imply that the red-shifted emission in polyfluorenes can originate from (usually undesirable) keto groups at the bridging carbon atoms-especially if the samples have been subject to photo- or electro-oxidation or if fluorenone units are present due to an improper purification of the monomers prior to polymerization.

Synthesis and application of new ion-tagged ligands and organocatalysts

We report the synthesis and application of some ion-tagged catalysts in organometallic catalysis and organocatalysis. With the installation of an ionic group on the backbone of a known catalyst, two main effects are generally obtained. i) a modification of the solubility of the catalyst: if judicious choice of the ion pair is made, the ion-tag can confer to the catalyst a solubility profile suitable for catalyst recycling. ii) the ionic group can play a non-innocent role in the process considered: if stabilizing interaction between the ionic group and the developing charges in the transition state are established, the reaction can speed up. We describe the use of ion-tagged diphenylprolinol as Zn ligand. The chiral ligand grafted onto an ionic liquid (IL) was recycled 10 times with no loss of reactivity and selectivity, when it was employed in the first example of enantioselective addition of ZnEt2 to aldehydes in ILs. An ammonium-tagged phosphine displayed the capability to stabilize Pd catalysts for the Suzuki reaction in ILs. The ionic phase was recycled 6 times with no detectable loss of activity and very low Pd leaching in the organic phase. This catalytic system was also employed for the functionalization of the challenging substrate 5,11-dibromotetracene. In the field of organocatalysis, we prepared two ion-tagged derivatives of the McMillan imidazolidinone. The results of the asymmetric Diels-Alder reaction between trans-cinnamaldehyde and cyclopentadiene exhibited great dependence on the position and nature of the ionic group. Finally, when O-TMS-diphenylprolinol was tagged with an imidazolium ion, exploiting a silyl ether linker, an efficient catalyst for the asymmetric addition of aldehydes to nitroolefins was achieved. The catalyst displayed enhanced reactivity and the same high level of selectivity of the untagged parent catalyst and it could be employed in a wide range of reaction conditions, included use of water as solvent.

Asymmetrische Synthese von 2-substituierten N-Galactosyl-piperidinderivaten und deren Verwendung zum Aufbau bicyclischer Heterocyclen

Ziel dieser Arbeit war es, ausgehend von auxiliargebundenen Piperidinderivaten, unterschiedliche chirale bi- und tricyclische Verbindungen darzustellen. Dazu wurde das 2,3,4,6-Tetra-O-pivaloyl--D-galactosylamin durch Kondensation mit Aldehyden in die entsprechenden Galactosylaldimine überführt, die in einer Lewissäure-katalysierten hochdiastereoselektiven Tandem-Mannich-Michael-Reaktionssequenz mit Danishefsky-Dien zu 2-substituierten Dehydropiperidinonen umgesetzt wurden. Die auf diese Weise zugänglichen chiralen Heterocyclen wurden diastereoselektiv in trans-konfigurierte 5-Bromverbindungen überführt. In einer Thiazolsynthese nach Hantzsch konnten die -Bromketone mit ambidenten Nukleophilen, wie Thiobenzamiden und unsymmetrischen Thioharnstoffderivaten, in niedrigen Ausbeuten zu bicyclischen Tetrahydro-thiazolo[5,4-c]pyridinen umgesetzt werden. Weitere bicyclische Heterocyclen mit einem Tetrahydro-thieno[2,3-c]pyridin-System konnten durch eine Gewald-Cyclisierung an 2-substituierten N-Galactosyl-piperidinonen erhalten werden. Durch Palladium-katalysierte Kreuzkupplungen an heterocyclischen Enoltriflaten, die ausgehend von den N-Galactosyl-dehydropiperidinonen synthetisiert wurden, gelang die Einführung von Aryl-, Alkinyl- und Alkenylsubstituenten in 4-Position des Piperidinringes. Zur Freisetzung der 2,4-disubstituierten Dehydropiperidinen wurde die N-glycosidische Bindung im sauren Milieu gespalten. Verbindungen mit einer exocyclischen Doppelbindung wurden einer Diels-Alder-Reaktion mit N-Phenylmaleinimid zum Aufbau von Isochinolinderivaten eingesetzt. Des Weiteren gelang die Synthese von 2-benzylsubstituierten N-Galactosyl-dehydropiperidinonen, wobei ortho-halogensubstituierte Phenylacetaldehyde eingesetzt wurden. Die in hohen Diastereomerenüberschüssen gebildeten Dehydropiperidinone wurden in die entsprechenden Enoltriflate überführt und einer Domino-Suzuki-Heck-Reaktion unterworfen. In dieser Kaskadenreaktion konnten tricyclische diastereomerenreine Benzomorphanderivate synthetisiert werden.

Funktionalisierte Polyphenylen-Dendrimere als nanoskopische Bausteine in der Sensorik

Die vorliegende Arbeit beschäftigt sich mit der Synthese funktionalisierter Polyphenylen-Dendrimere für den Einsatz als Nanobausteine in übermolekularen 3-D Aggregaten für potentielle sensorische Anwendungen. Im ersten Teil werden zwei Konzepte zur Synthese von funktionalisierten Cyclopentadienonbausteinen vorgestellt: einer führt zu Bausteinen die zur Synthese von peripher-funktionalisierten Polyphenylen-Dendrimere geeignet sind, und ein zweiter Ansatz zielt auf Cyclopentadienonbausteine, die es erlauben Polyphenylen-Dendrimere im Inneren zu funktionalisieren. Für das erste Ziel erwies sich die Suzuki-Kreuzkupplung von Arylboronsäuren und Arylboronsäurenester mit Arylhalogeniden als ein optimales synthetisches Werkzeug. Demgegenüber wurden für das zweite Ziel -methylesterfunktionalisierten Cyclopentadienonbausteine anhand der Knoevenagel-Kondensation von bereits funktionstragenden-Partnern synthetisiert. Im zweiten Teil der Arbeit werden die Synthesen von funktionalisierten Polyphenylen-Dendrimeren vorgestellt. Hierbei kamen zwei verschiedene synthetische Ansätze zum Einsatz: Einerseits wurden durch die Diels-Alder-Addition der funktionalisierten Cyclopentadienonbausteine an ethinylfunktionalisierten Polyphenylen-Grundkörper unterschiedlicher Generation die verfolgten funktionalisierten Zielverbindungen erhalten. Andererseits wurde in bestimmten Fällen die polymeranaloge Konversion von „Übergangsfunktionen“ in einem a posteriori-Funktionalisierungsschritt angewendet. Dementsprechend wurde die Einführung von funktionellen Gruppen möglich die entweder die alkalischen Bedingungen der Knoevenagel – Kondensation oder die hohen Temperaturen der Diels-Alder-Cycloaddition nicht überstehen. Die synthetischen Werkzeuge, die bei der a posteriori-Funktionalisierung zum Einsatz kamen, mussten die vollständige und nebenreaktionsfreie Konversion der Übergangsfunktionen ermöglichen. Als Reaktionen, die dieser Bedingungen genügen, wurden die Williamson –Ethersynthese und die Esterknüpfung nach der DCC-Methode in Verbindung mit hydroxyfunktionalisierten Polyphenylen-Grundkörper und die basische Esterspaltung an methyleseterfunktionalisierten Dendrimeren angewandt. Die aufgezählten Reaktionen führten zu Endprodukten, die ihre Monodispersität beibehielten und eine definierte Anzahl an Funktionalität aufwiesen. Anhand eingehenden Untersuchungen (der Aufbau von Sensorschichten für flüchtige organische Lösungsmittel, die Untersuchungen an elektrostatisch-wechselwirkenden übermolekularen Aggregaten sowie die Einlagerung von Gastmolekülen) wird es ersichtlich dass die synthetisierten Polyphenylen-Dendrimere vielseitig als Nanobausteine zur Erzeugung von funktionalen Materialien von potenzieller Bedeutung sind.

Die Synthese von Glycopeptiden und Glycopeptid-Protein-Konjugaten mit einer Partialstruktur des tumorassoziierten Mucins MUC1 zur Entwicklung von Tumorvakzinen

„Synthese von Glycopeptiden und Glycopeptid-Protein-Konjugaten mit einer Partialstruktur des tumorassoziierten Mucins MUC1 zur Entwicklung von Tumorvakzinen“ Das Glycoprotein MUC1 ist in Tumorepithelzellen sonderlich stark überexprimiert und wegen der vorzeitig einsetzenden Sialylierung sind die Saccharid-Epitope der O-Glycanketten stark verkürzt (sog. tumorassoziierte Antigene). Dadurch werden auch bisher verborgene Peptidepitope des Glycoprotein-Rückgrates auf der Zelloberfläche der Epithelzellen zugänglich, die als fremd von den Zellen des Immunsystems erkannt werden können. Dies macht das MUC1-Zelloberfächenmolekül zu einem Zielmolekül in der Entwicklung von Tumorvakzinen. Diese beiden strukturellen Besonderheiten wurden in der Synthese von Glycohexadecapeptiden verbunden, indem die veränderten tumorassoziierten Saccharidstrukturen TN-, STN- und T-Antigen als Glycosylaminosäure-Festphasenbausteine synthetisiert wurden und in das Peptidepitop der Wiederholungseinheit des MUC1 durch Glycopeptid-Festphasensynthese eingebaut wurden. Wegen der inhärenten schwachen Immunogenität der kurzen Glycopeptide müssen die synthetisierten Glycopeptidstrukturen an ein Trägerprotein, welches das Immunsystem stimuliert, gebunden werden. Zur Anbindung der Glycopeptide ist ein selektives Kupplungsverfahren nötig, um definierte und strukturell einheitliche Glycopeptid-Protein-Konjugate zu erhalten. Es konnte eine neue Methode entwickelt werden, bei der die Konjugation durch eine radikalische Additionsreaktion von als Allylamide funktionalisierten Glycopeptiden an ein Thiol-modifiziertes Trägerprotein erfolgte. Dazu wurde anhand von synthetisierten, als Allylamide modifizierten Modellaminosäuren untersucht, ob diese Reaktion generell für eine Biokonjugation geeignet ist und etwaige Nebenreaktionen auftreten können. Mit dieser Methode konnten verschiedene MUC1-Glycopeptid-Trägerprotein-Konjugate hergestellt werden, deren immunologische Untersuchung noch bevorsteht. Das tumorassoziierte MUC1 nimmt in der immundominanten Region seiner Wiederholungseinheit eine knaufartige Struktur ein. Für die Entwicklung von selektiven Tumorvakzinen ist es von großer Bedeutung möglichst genau die Struktur der veränderten Zelloberflächenmoleküle nachzubilden. Durch die Synthese von cyclischen (Glyco)Peptiden wurde dieses Strukturelement fixiert. Dazu wurden olefinische Aminosäure Festphasenbausteine hergestellt, die zusammen mit den oben genannten Glycosylaminosäuren mittels einer Glycopeptid-Festphasensynthese in acyclische Glycopeptide eingebaut wurden. Diese wurden dann durch Ringschlussmetathese zyklisiert und im Anschluss reduziert und vollständig deblockiert. In einem dritten Projekt wurde der Syntheseweg zur Herstellung einer C-Glycosylaminosäure mit einer N-Acetylgalactosamin-Einheit entwickelt. Wichtige Schritte bei der von Glucosamin ausgehenden Synthese sind die Keck-Allylierung, eine Epimerisierung, die Herstellung eines Brom-Dehydroalanin-Derivates und eine B-Alkyl-Suzuki-Miyaura-Kreuzkupplung sowie Schutzgruppenoperationen. Der racemische Baustein konnte dann in der Peptid-Festphasensynthese eines komplexen MUC1-Tetanustoxin-Konjugates eingesetzt werden.

Thiophene- Based Materials for Photovoltaic Applications

Thiophene oligomers (OTs) and polymers (PTs) are currently attracting remarkable attention as organic materials showing semiconducting, fluorescent, nonlinear optical and liquid crystalline properties. All these properties can be fine-tuned through minor structural modifications. As a consequence, thiophene oligomers and polymers are among the most investigated compounds for applications in organic electronics, optoelectronics and thin film devices such as field effect transistors (FETs), light emitting diodes (LEDs) and photovoltaic devices (PVDs). Our research aims to explore the self-assembly features and the optical, electrical and photovoltaic properties of a class of thiophene based materials so far scarcely investigated, namely that of oligo- and polythiophenes head-to-head substituted with alkyl or S-alkyl chains. In particular, we synthesized these compounds in short reaction times, high yields, high purity and environmentally friendly procedures taking advantage of ultrasound (US) and microwave (MW) enabling technologies in Suzuki-Miyaura cross-couplings.

Synthesis of hexa-peri-hexabenzocoronenes - from building blocks to functional materials

Discotic hexa-peri-hexabenzocoronene (HBC) derivatives have attracted intensive scientific interest due to their unique optoelectronic properties, which depends, to a large extend, upon the attached functional groups. The presented work covers the synthesis of novel HBC building blocks and new HBC derivatives as functional materials. The traditional preparation of HBC derivatives requires elaborate synthetic techniques and tremendous effort. Especially, more than 10 synthetic steps are usually necessary to approach HBCs with lower symmetries. In order to simplify the synthetic work and reduce the high costs, a novel synthetic strategy involving only four steps was developed based on 2,3,5,6-tetraphenyl-1,4-diiodobenzene intermediates and palladium catalyzed Suzuki cross coupling reactions. In order to introduce various functionalities and expand the diversity of multi-functionalizations, a novel C2v-symmetric dihalo HBC building block 2-47, which contains one iodine and one bromine in para positions, was prepared following the traditional intermolecular [4+2] Diels-Alder reaction route. The outstanding chemical selectivity between iodo and bromo groups in this compound consequently leads to lots of HBC derivatives bearing different functionalities. Directly attached heteroatoms will improve the material properties. According to the application of intramolecular Scholl reaction to a para-dimethoxy HPB, which leads to a meta-dimethoxy HBC, a phenomenon of phenyl group migration was discovered. Thereby, several interesting mechanistic details involving arenium cation intermediates were discussed. With a series of dipole functionalized HBCs, the molecular dynamics of this kind of materials was studied in different phases by DSC, 2D WAXD, solid state NMR and dielectric spectroscopies. High charge carrier mobility is an important parameter for a semiconductive material and depends on the degree of intramolecular order of the discotic molecules in thin films for HBC derivatives. Dipole – dipole interaction and hydrogen bonds were respectively introduced in order to achieve highly ordered supramolecular structure. The self-assembly behavior of these materials were investigated both in solution and solid state. Depending upon the different functionalities, these novel materials show either gelating or non-linear optical properties, which consequently broaden their applications as functional materials. In the field of conceivable electronic devices at a molecular level, HBCs hold high promise. Differently functionalized HBCs have been used as active component in the studies of single-molecular CFET and metal-SAMs-metal junctions. The outstanding properties shown in these materials promise their exciting potential applications in molecular devices.

Synthese und photophysikalische Eigenschaften von Indolocarbazolen und höheren Analoga

Das Ziel dieser Arbeit bestand zum einen in der Entwicklung einer einfachen Synthesestrategie zur Darstellung substituierter symmetrischer Indolo[3,2-b]carbazole sowie in der Erweiterung des -Elektronensystems, um höhere Analoga dieser Substanzklasse zu synthetisieren. Der Zugang sollte dabei durch eine doppelte Cadogan-Ringschlussreaktion als Schlüsselschritt erfolgen. Die doppelte Cadogan-Reaktion erfolgte dabei unter Mikrowellenbedingungen in zufriedenstellenden Ausbeuten. Mittels Röntgenstrukturanalyse sind die verschiedenen Indolo[3,2-b]carbazole und Diindolo[3,2-b;2´,3´-h]carbazole auf ihre Eigenschaften im Festkörper hin untersucht worden. Dabei zeigen sie mit ihren Anordnungen im festen Zustand gute Eigenschaften für deren Verwendung als organische Halbleitermaterialien in Organischen Dünnschichttransistoren oder auch in Organischen Leuchtdioden. Die photophysikalische Charakterisierung erfolgte mittels UV/Vis- und Fluoreszenzspektroskopie sowie durch elektrooptische Absorptionsmessung, die Informationen über die Größe der Dipolmomente im Grundzustand und im angeregten Franck-Condon-Zustand lieferte. Die elektrochemischen Eigenschaften wurden aus cyclovoltammetrischen Messungen durch die Bestimmung der Redoxpotentiale, und damit die Lage der HOMO- bzw. LUMO-Levels, gewonnen. Durch die Synthese und die Bestimmung ihrer photophysikalischen Eigenschaften, mittels UV/Vis- und Fluoreszenzspektroskopie, von auf Naphthalin basierenden Chromophoren wurden zudem Verbindungen dargestellt, die Verwendung in lumineszierenden Lanthanid(III)-Komplexen finden können. Die Darstellung erfolgte mittels einer palladium-katalysierten Arylaminierung gefolgt von einer Suzuki-Kupplung mit 1,4-Dibromnaphthalin als Startmaterial.

1,2-Additionen deprotonierter Alpha-Aminonitrile: Umgepolte Imine als vielseitige Synthesebausteine

Von aromatischen Aldehyden abgeleitete α-Aminonitrile können ohne die Anwendung von Schutzgruppen in α-Position deprotoniert werden, wenn keine lithiumhaltigen Basen verwendet werden. Ziel der vorliegenden Arbeit war es, die Reaktionen deprotonierter α-Aminonitrile mit Elektrophilen zu untersuchen. Die Addition von α-Aminocarbanionen an Imine führt unter intramolekularer Eliminierung von HCN zu Endiaminen, die sich in einer Eintopfsynthese abhängig von der Aufarbeitung in 1,2-Diamine oder 1,2-Diimine umwandeln lassen. Die nach Oxidation durch Luftsauerstoff erhaltenen Diimine können mit dem Reduktionsmittel BH3·THF diastereoselektiv reduziert werden. Es hat sich hier gezeigt, dass durch Zugabe einer katalytischen Menge an NaBH4 hauptsächlich die syn-Diamine erhalten werden, der Zusatz von Phthalsäure wiederum liefert bevorzugt die anti-Produkte. In beiden Fällen wird das Produkt in quantitativer Ausbeute erhalten. So konnte also eine effektive diastereoselektive Reduktionsmethode entwickelt werden, die eine freie Wahl der syn- oder anti-Konfiguration ermöglicht. Um enantiomerenreine 1,2-Diamine zu erhalten, wurden verschiedene Methoden getestet. Sowohl auxiliargesteuerte Synthesen mit einem N-Glycosyl-Aminonitril oder mit chiralen Sulfinyliminen als auch die Reduktion durch chirale Borverbindungen (CBS-Katalysatoren, Triacyloxyborhydrid oder Diisopinocamphenylboran), Transferhydrierungen mit chiralen Difluortitanocen-, Noyori- oder Organophosphat-Katalysatoren sowie enantioselektive Hydrierungen mit chiralen Übergangsmetall-katalysatoren waren jedoch nicht erfolgreich. Die Umsetzung der 1,2-Diimine mit Chlormethylethern oder -estern liefert die entsprechenden unsymmetrischen Imidazoliumsalze. Diese konnten zu N-heterocyclischen Carbenen deprotoniert und erfolgreich als Liganden in Suzuki- und Heck-Reaktionen eingesetzt werden. Durch die 1,2-Addition α-deprotonierter Streckerprodukte und anschließende Reduktion im Eintopfverfahren konnten 1,2-Aminoalkohole in mäßigen bis guten Ausbeuten dargestellt werden. Die Umsetzung von α-Aminocarbanionen mit N-Acyliminen erlaubt zudem die Synthese tetrasubstituierter Imidazole und trisubstituierter Oxazole in drei beziehungsweise vier Stufen: Die zunächst gebildeten α-Amino-α-acylaminopropionitrile können isoliert und in Gegenwart von Base einer Retro-Strecker-Reaktion unterworfen werden. Abhängig vom Substitutionsmuster schließt sich in manchen Fällen nach der Eliminierung von HCN direkt die Cyclisierung zum Imidazol an. Nicht cyclisierte Intermediate lassen sich durch Dehydratisierung mit PCl5 zu Imidazolen umsetzen, aber auch unter sauren Bedingungen zu α-Acylaminoketonen hydrolysieren, welche wiederum durch Einwirkung von PCl5 in Oxazole überführt werden können. Auf diese Weise wurden Imidazole und Oxazole in moderaten bis hohen Gesamtausbeuten hergestellt.

Acidi fosforici atropoisomerici: sintesi, caratterizzazione e catalisi.

Studio, a livello teorico basandosi sulla teoria DFT, del precursore dell’acido fosforico di Brønsted derivato dall’R-BINOL, delineazione delle conformazioni possibili e della loro stabilità come supporto base alla via sperimentale. Ricerca di una via di sintesi ottimizzata, basata sulla reazione di Suzuki-coupling, che permetta di ottenere i precursori ipotizzati in precedenza (si veda la figura 9) con buone rese e successiva separazione degli atropoisomeri mediante HPLC semipreparartiva. Caratterizzazione completa degli isomeri conformazionali utilizzando tecniche spettroscopiche (NMR ed ECD), studio cinetico per ottenere il valore della barriera rotazionale sperimentale (ΔG#) dei gruppi metilnaftalenici attraverso equilibrazione termica e confronto con i dati teorici. Ricerca di una via di sintesi che consenta la funzionalizzazione dei precursori ad acidi fosforici senza alterazione della conformazione atropoisomerica e con assenza di racemizzazione ed equilibrazione. Studio dell’attività catalitica dei vari atropoisomeri in una sintesi asimmetrica nota per osservare sia come varia la reattività in funzione della conformazione molecolare, sia per ottenere confronti con altri organocatalizzatori conosciuti.

Amphiphile Kammpolymere von Poly(2,7-carbazol)

Die vorliegende Dissertation beschreibt die Verschmelzung der Konzepte von konjugierten Polyelektrolyten und amphiphilen Kammpolymeren in Form von konjugierten, Poly(2,7-carbazol)-basierenden Polyelektrolytkammpolymeren mit Poly(L-lysin)seitenketten sowie Alkyl- oder Polyethylenglykolsubstituenten. Die Synthese wurde durch die Suzuki-Polykondensation von monodispersen Makromonomeren erreicht. Hierbei fand die Precursor-Synthesestrategie Anwendung. In diesem Ansatz war die ε-Aminofunktion des Lysins mit einer Benzoyloxycarbonylschutzgruppe geschützt. Der Aufbau der benötigten monodispersen Makromonomere erfolgte durch die Kupplung von Poly(L-lysin)ketten an den Carbazolbaustein mittels eines aktivierten Esters. Eine Besonderheit der hergestellten Kammpolymere lag in den konformativen Eigenschaften seiner einzelnen Komponenten. Dabei konnte die Konformation der Poly(L-lysin)seitenketten infolge ihres Polyelektrolyt- und Peptidcharakters gezielt mit Hilfe des pH-Wertes und der Ionenstärke variiert werden, wohingegen das konjugierte Rückgrat seine steife Konformation beibehielt. Infolge des Polyelektrolytcharakters zeigte sich zudem, dass die Polymere in sauren und neutralen, wässrigen Lösungen zu großen Teilen in Form von Domänenstrukturen auftraten, während im Basischen eine sofortige Aggregation eintrat. Ein weiteres Merkmal der vorgestellten Polyelektrolytkammpolymere war ihr amphiphiler Charakter. Diese Amphiphilie der in dieser Arbeit vorgestellten Polyelektrolytkammpolymere beeinflusste dabei maßgeblich ihre unstrukturierte Anordnung in Lösung, in der festen Phase sowie an Oberflächen.