Mobile Platforms and monetising the Second Screen.

Discussion paper commissioned by the RSE for its official working group on BBC Charter Renewal. The paper sought to investigate evolving mobile digital platforms and audience habits. Beyond this the research was intended to highlight areas where the BBC might develop a more commercial strategy in the new charter period. The paper fed into the discussions around the RSE response to the government consultation on BBC Charter renewal. The paper is significant to measure the impact of research around interactive Second Screen activity in the media landscape.

Television and the Second Screen.

This book examines an emerging and fast evolving phenomena: that a growing number of people engage with two screens whilst watching television. It seems a simple concept – until we discover the important implications. In doing this, this book will move way beyond the study of online and multimedia content. It will go past the impact of mobile and multi-platform technology on the media. Instead it will examine how this new concept of second screen interactivity changes the way we watch, produce, commission and monetise television programmes in the UK.

Sherlock Holmes: from paper to screen

A adaptação relaciona-se com as produções cinematográficas e televisivas quase desde o princípio da história destes meios. Os primeiros filmes exibidos eram frequentemente baseados em obras literárias históricas ou ficcionais, sendo um importante factor na evolução e desenvolvimento da produção cinematográfica como a conhecemos. Neste estudo, será analisada, segundo o ponto de vista dos estudos da tradução intersemiótica, a obra The Hound of The Baskervilles, de Sir Arthur Conan Doyle, sendo esta uma das obras mais populares do género literário criminal. Esta análise pretende servir de “ponte” para estabelecer a relação entre o processo de tradução e o da adaptação, comparando as suas semelhanças e diferenças, além de exemplificar um processo para a análise crítica de adaptações que não se baseie meramente na perspectiva dos estudos literários acerca deste tipo de trabalhos.

Improving CEGEP Students’ ESL Accuracy through L1/L2 Synchronous Text-based Screen-Sharing Tasks

Abstract : CEGEPs are now reaping the ‘first fruits’ of the last Educational Reform in Quebec and as a result, ‘English as Second Language’ (ESL) teachers are noticing an improvement in fluency and a seemingly lower level of inhibition when it comes to production skills. However, this output is accompanied by a noticeable lack of accuracy. Keeping in mind that the purpose of language is communication, we need to find a way to reduce the number of basic common errors made by CEGEP ESL students, while maintaining a natural and motivating learning environment. Thanks to recent advances in computer-mediated communication (CMC), we now have the necessary tools to access peer native speakers throughout the world. Although this technology can be used for other language courses, this study explored the potential value of collaboration with native English speakers through the use of synchronous screen-sharing technology, in order to improve CEGEP ESL students’ accuracy in writing. The instrumentation used consisted of a questionnaire, tests, plus documents of collaborative tasks, using the ‘Google for Education’ screen-sharing tool. Fourteen Intermediate/Advanced ESL CEGEP students participated in this study. Despite the positive tendencies revealed, only a prolonged use of the innovative method yielded a significant positive impact. Moreover, a mixed linear regression for the group with more L1 intervention revealed a significant correlation between the number of errors in the task documents and the number of tasks accomplished. Thus, it could be inferred that ESL accuracy improves in proportion to the number of synchronous text-based screen-sharing tasks done with L1 collaboration.

Extracting reusable document components for variable data printing

Variable Data Printing (VDP) has brought new flexibility and dynamism to the printed page. Each printed instance of a specific class of document can now have different degrees of customized content within the document template. This flexibility comes at a cost. If every printed page is potentially different from all others it must be rasterized separately, which is a time-consuming process. Technologies such as PPML (Personalized Print Markup Language) attempt to address this problem by dividing the bitmapped page into components that can be cached at the raster level, thereby speeding up the generation of page instances. A large number of documents are stored in Page Description Languages at a higher level of abstraction than the bitmapped page. Much of this content could be reused within a VDP environment provided that separable document components can be identified and extracted. These components then need to be individually rasterisable so that each high-level component can be related to its low-level (bitmap) equivalent. Unfortunately, the unstructured nature of most Page Description Languages makes it difficult to extract content easily. This paper outlines the problems encountered in extracting component-based content from existing page description formats, such as PostScript, PDF and SVG, and how the differences between the formats affects the ease with which content can be extracted. The techniques are illustrated with reference to a tool called COG Extractor, which extracts content from PDF and SVG and prepares it for reuse.

Eighteenth-century type in the roal printing office

Tese apresentada na Faculdade de Arquitetura da Universidade de Lisboa, para obtenção do grau de Doutor em Design

Electrical characterization of electronic circuits produced by inkjet printing

Dissertação de Mestrado, Engenharia Electrónica e Telecomunicações, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Adapting Victorian Gypsies for the Screen: Ethnicity, Otherness and (In)visibility in Neo-Victorian Popular Film

This paper aims at analysing the presence of gypsy characters in two neo-Victorian popular films, namely Joe Johnston’s The Wolfman (2010) and Guy Ritchie’s Sherlock Holmes: Game of Shadows (2011). The cultural construction of nineteenth-century gypsies, those “Others within Europe” (Boyarin 433) whose presence in Victorian fiction was peripheral, spectral and at times invisible (Nord 3-4), is simultaneously exploited and contested by these two neo-Victorian screen narratives to raise issues of otherness and invisibility on the screen. Setting off from the premise that screen texts, just like print texts, can also be participant in the neo-Victorian project of reimagining the underside of Victorian culture for contemporary audiences (Whelehan 273), this paper traces how the adaptation of Victorian gypsies for the screen, true to the palimpsestuous potential inherent to the process of adaptation (Hutcheon 6) and sharing the double drive between past and present which characterises the neo-Victorian genre (Arias and Pulham xiii; Shiller 539), hybridises our cultural memory of the Victorian Age on the screen while concurrently raises concerns over the persistent liminal status of gypsies in contemporary European culture. In particular, this paper illustrates how the tropes prototypically associated to gypsies (namely their nomadic lifestyle, mysticism, alienated existence or their perceived association to criminality) which can be traced back to Victorian culture are deployed on the neo-Victorian popular screen (with varyingly succesful outcomes) to comment on their (in)visibility in the European popular imagination.

A MARKET-BASED APPROACH TO 3D PRINTING FOR ECONOMIC DEVELOPMENT IN GHANA

The purpose of this report is to create the foundation for further study of a market-based approach to 3D printing as an instrument for economic development in Ghana. The delivery of improved products and services to the most underserved markets is needed to spur economic activity and improve standards of living. The relationship between economic development and the advancement of technology is considered within the context of Ghana. An opportunity for market entry exists within both the bottom of the economic pyramid and the mid-segment market. 3D printing (additive manufacturing) has proven to be a disruptive technology that has demonstrated an ability to expedite the speed of innovations and create products that were previously not possible. An investigation of how 3D printers can be used to create improved products for the most underserved markets within Ghana is presented. Questions are asked to elucidate how and when adoption of 3D printers and 3D printed products may occur in the future. Based upon the existing barriers to adoption, 3D printing technology must improve before widespread adoption will occur in Ghana.

Using induced pluripotent stem cells (IPSCS) as a replacement for in vivo models to screen novel therapies in chronic myeloid leukaemia (CML)

Tyrpsine kinase inhibitors (TKIs) effectively target progenitors and mature leukaemic cells but prove less effective at eliminating leukaemic stem cells (LSCs) in patients with chronic myeloid leukaemia (CML). Several reports indicate that the TGFβ superfamily pathway is important for LSC survival and quiescence. We conducted extensive microarray analyses to compare expression patterns in normal haemopoietic stem cells (HSC) and progenitors with CML LSC and progenitor populations in chronic phase (CP), accelerated phase (AP) and blast crisis (BC) CML. The BMP/SMAD pathway and downstream signalling molecules were identified as significantly deregulated in all three phases of CML. The changes observed could potentiate altered autocrine signalling, as BMP2, BMP4 (p<0.05), and ACTIVIN A (p<0.001) were all down regulated, whereas BMP7, BMP10 and TGFβ (p<0.05) were up regulated in CP. This was accompanied by up regulation of BMPRI (p<0.05) and downstream SMADs (p<0.005). Interestingly, as CML progressed, the profile altered, with BC patients showing significant over-expression of ACTIVIN A and its receptor ACVR1C. To further characterise the BMP pathway and identify potential candidate biomarkers within a larger cohort, expression analysis of 42 genes in 60 newly diagnosed CP CML patient samples, enrolled on a phase III clinical trial (www.spirit-cml.org) with greater than 12 months follow-up data on their response to TKI was performed. Analysis revealed that the pathway was highly deregulated, with no clear distinction when patients were stratified into good, intermediate and poor response to treatment. One of the major issues in developing new treatments to target LSCs is the ability to test small molecule inhibitors effectively as it is difficult to obtain sufficient LSCs from primary patient material. Using reprogramming technologies, we generated induced pluripotent stem cells (iPSCs) from CP CML patients and normal donors. CML- and normal-derived iPSCs were differentiated along the mesodermal axis to generate haemopoietic and endothelial precursors (haemangioblasts). IPSC-derived haemangioblasts exhibited sensitivity to TKI treatment with increased apoptosis and reduction in the phosphorylation of downstream target proteins. 4 Dual inhibition studies were performed using BMP pathway inhibitors in combination with TKI on CML cell lines, primary cells and patient derived iPSCs. Results indicate that they act synergistically to target CML cells both in the presence and absence of BMP4 ligand. Inhibition resulted in decreased proliferation, irreversible cell cycle arrest, increased apoptosis, reduced haemopoietic colony formation, altered gene expression pattern, reduction in self-renewal and a significant reduction in the phosphorylation of downstream target proteins. These changes offer a therapeutic window in CML, with intervention using BMP inhibitors in combination with TKI having the potential to prevent LSC self-renewal and improve outcome for patients. By successfully developing and validating iPSCs for CML drug screening we hope to substantially reduce the reliance on animal models for early preclinical drug screening in leukaemia.

Temporary teams learning and performance: the case of 3D printing technology in orthopaedic surgery

This dissertation contributes to the scholarly debate on temporary teams by exploring team interactions and boundaries.The fundamental challenge in temporary teams originates from temporary participation in the teams. First, as participants join the team for a short period of time, there is not enough time to build trust, share understanding, and have effective interactions. Consequently, team outputs and practices built on team interactions become vulnerable. Secondly, as team participants move on and off the teams, teams’ boundaries become blurred over time. It leads to uncertainty among team participants and leaders about who is/is not identified as a team member causing collective disagreement within the team. Focusing on the above mentioned challenges, we conducted this research in healthcare organisations since the use of temporary teams in healthcare and hospital setting is prevalent. In particular, we focused on orthopaedic teams that provide personalised treatments for patients using 3D printing technology. Qualitative and quantitative data were collected using interviews, observations, questionnaires and archival data at Rizzoli Orthopaedic Institute, Bologna, Italy. This study provides the following research outputs. The first is a conceptual study that explores temporary teams’ literature using bibliometric analysis and systematic literature review to highlight research gaps. The second paper qualitatively studies temporary relationships within the teams by collecting data using group interviews and observations. The results highlighted the role of short-term dyadic relationships as a ground to share and transfer knowledge at the team level. Moreover, hierarchical structure of the teams facilitates knowledge sharing by supporting dyadic relationships within and beyond the team meetings. The third paper investigates impact of blurred boundaries on temporary teams’ performance. Using quantitative data collected through questionnaires and archival data, we concluded that boundary blurring in terms of fluidity, overlap and dispersion differently impacts team performance at high and low levels of task complexity.

3D Printing and bioprinting of osteomimetic materials for 3D in vitro models and tissue repair applications

Bone disorders have severe impact on body functions and quality life, and no satisfying therapies exist yet. The current models for bone disease study are scarcely predictive and the options existing for therapy fail for complex systems. To mimic and/or restore bone, 3D printing/bioprinting allows the creation of 3D structures with different materials compositions, properties, and designs. In this study, 3D printing/bioprinting has been explored for (i) 3D in vitro tumor models and (ii) regenerative medicine. Tumor models have been developed by investigating different bioinks (i.e., alginate, modified gelatin) enriched by hydroxyapatite nanoparticles to increase printing fidelity and increase biomimicry level, thus mimicking the organic and inorganic phase of bone. High Saos-2 cell viability was obtained, and the promotion of spheroids clusters as occurring in vivo was observed. To develop new syntethic bone grafts, two approaches have been explored. In the first, novel magnesium-phosphate scaffolds have been investigated by extrusion-based 3D printing for spinal fusion. 3D printing process and parameters have been optimized to obtain custom-shaped structures, with competent mechanical properties. The 3D printed structures have been combined to alginate porous structures created by a novel ice-templating technique, to be loaded by antibiotic drug to address infection prevention. Promising results in terms of planktonic growth inhibition was obtained. In the second strategy, marine waste precursors have been considered for the conversion in biogenic HA by using a mild-wet conversion method with different parameters. The HA/carbonate ratio conversion efficacy was analysed for each precursor (by FTIR and SEM), and the best conditions were combined to alginate to develop a composite structure. The composite paste was successfully employed in custom-modified 3D printer for the obtainment of 3D printed stable scaffolds. In conclusion, the osteomimetic materials developed in this study for bone models and synthetic grafts are promising in bone field.

Direct And Non-destructive Proof Of Authenticity For The 2nd Generation Of Brazilian Real Banknotes Via Easy Ambient Sonic Spray Ionization Mass Spectrometry.

Using a desorption/ionization technique, easy ambient sonic-spray ionization coupled to mass spectrometry (EASI-MS), documents related to the 2nd generation of Brazilian Real currency (R$) were screened in the positive ion mode for authenticity based on chemical profiles obtained directly from the banknote surface. Characteristic profiles were observed for authentic, seized suspect counterfeit and counterfeited homemade banknotes from inkjet and laserjet printers. The chemicals in the authentic banknotes' surface were detected via a few minor sets of ions, namely from the plasticizers bis(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP), most likely related to the official offset printing process, and other common quaternary ammonium cations, presenting a similar chemical profile to 1st-generation R$. The seized suspect counterfeit banknotes, however, displayed abundant diagnostic ions in the m/z 400-800 range due to the presence of oligomers. High-accuracy FT-ICR MS analysis enabled molecular formula assignment for each ion. The ions were separated by 44 m/z, which enabled their characterization as Surfynol® 4XX (S4XX, XX=40, 65, and 85), wherein increasing XX values indicate increasing amounts of ethoxylation on a backbone of 2,4,7,9-tetramethyl-5-decyne-4,7-diol (Surfynol® 104). Sodiated triethylene glycol monobutyl ether (TBG) of m/z 229 (C10H22O4Na) was also identified in the seized counterfeit banknotes via EASI(+) FT-ICR MS. Surfynol® and TBG are constituents of inks used for inkjet printing.

Ankhd1 Silencing Inhibits Stathmin 1 Activity, Cell Proliferation And Migration Of Leukemia Cells.

ANKHD1 is highly expressed in human acute leukemia cells and potentially regulates multiple cellular functions through its ankyrin-repeat domains. In order to identify interaction partners of the ANKHD1 protein and its role in leukemia cells, we performed a yeast two-hybrid system screen and identified SIVA, a cellular protein known to be involved in proapoptotic signaling pathways. The interaction between ANKHD1 and SIVA was confirmed by co-imunoprecipitation assays. Using human leukemia cell models and lentivirus-mediated shRNA approaches, we showed that ANKHD1 and SIVA proteins have opposing effects. While it is known that SIVA silencing promotes Stathmin 1 activation, increased cell migration and xenograft tumor growth, we showed that ANKHD1 silencing leads to Stathmin 1 inactivation, reduced cell migration and xenograft tumor growth, likely through the inhibition of SIVA/Stathmin 1 association. In addition, we observed that ANKHD1 knockdown decreases cell proliferation, without modulating apoptosis of leukemia cells, while SIVA has a proapoptotic function in U937 cells, but does not modulate proliferation in vitro. Results indicate that ANKHD1 binds to SIVA and has an important role in inducing leukemia cell proliferation and migration via the Stathmin 1 pathway. ANKHD1 may be an oncogene and participate in the leukemia cell phenotype.