947 resultados para MONO-N-DEALKYLDISOPYRAMIDE
Resumo:
The conversion of plant biomass-derived carbohydrates (preferably non-edible) into added-value products is envisaged to be at the core of the future biorefineries. Carbohydrates are the most abundant natural organic polymers on Earth. This work deals with the chemical valorisation of plant biomass, focusing on the acid-catalysed conversion of carbohydrates (mono and polysaccharides) to furanic aldehydes, namely 2-furaldehyde (Fur) and 5-hydroxymethyl-2-furaldehyde (Hmf), which are valuable platform chemicals that have the potential to replace a variety of oil derived chemicals and materials. The investigated reaction systems can be divided into two types depending on the solvent used to dissolve the carbohydrates in the reaction medium: water or ionic liquid-based systems. The reaction temperatures were greater than 150 ºC when the solvent was water, and lower than 150 º C in the cases of the ionic liquid-based catalytic systems. As alternatives to liquid acids (typically used in the industrial production of Fur), solid acid catalysts were investigated in these reaction systems. Aiming at the identification of (soluble and insoluble) reaction products, complementary characterisation techniques were used namely, FT-IR spectroscopy, liquid and solid state NMR spectroscopy, TGA, DSC and GC´GC-ToFMS analyses. Complex mixtures of soluble reaction products were obtained and different types of side reactions may occur. The requirements to be put on the catalysts for these reaction systems partly depend on the type of carbohydrates to be converted and the reaction conditions used. The thermal stability is important due to the fact that formation of humins and catalyst coking phenomena are characteristically inherent to these types of reactions systems leading to the need to regenerate the catalyst which can be effectively accomplished by calcination. Special attention was given to fully inorganic nanoporous solid acids, amorphous or crystalline, and consisting of nano to micro-size particles. The investigated catalysts were silicoaluminophosphates, aluminosilicates and zirconium-tungsten mixed oxides which are versatile catalysts in that their physicochemical properties can be fine-tuned to improve the catalytic performances in the conversion of different substrates (e.g. introduction of mesoporosity and modification of the acid properties). The catalytic systems consisting of aluminosilicates as solid acids and water as solvent seem to be more effective in converting pentoses and related polysaccharides into Fur, than hexoses and related polysaccharides into Hmf. The investigated solid acids exhibited fairly good hydrothermal stabilities. On the other hand, ionic liquid-based catalytic systems can allow reaching simultaneously high Fur and Hmf yields, particularly when Hmf is obtained from D-fructose and related polysaccharides; however, catalyst deactivation occurs and the catalytic reactions take place in homogeneous phase. As pointed out in a review of the state of the art on this topic, the development of truly heterogeneous ionic liquid-based catalytic systems for producing Fur and Hmf in high yields remains a challenge.
Resumo:
Compostos do tipo pirazol e 1,2,3-triazol encontram-se presentes em inúmeras moléculas biologicamente ativas. Muitos fármacos atualmente comercializados ou em fase de estudos clínicos contêm na sua estrutura base núcleos de pirazol ou 1,2,3-triazol. Por isso, estes compostos têm sido alvo de intensa pesquisa na procura de novas moléculas com potenciais aplicações medicinais e agroquímicas. Nesta dissertação são descritas novas vias de síntese de novos compostos do tipo pirazol e 1,2,3-triazol. No primeiro capítulo apresenta-se uma breve revisão bibliográfica sobre a atividade biológica, ocorrência natural e métodos de síntese de pirazóis e seus derivados. O segundo capítulo foca-se na síntese de (E)-2-estiril-3-halo-4H-cromen-4-onas e sua transformação em 3(5)-aril-5(3)-[2-(2-hidroxifenil)-2-oxoetil-1H-pirazóis. Em primeiro lugar faz-se uma revisão bibliográfica sobre as (E)-2-estiril-4H-cromen-4-onas e a sua semelhança estrutural com as flavonas, a sua importância e ocorrência natural e métodos de síntese. São ainda abordadas as metodologias mais utilizadas para a síntese de derivados halogenados de (E)-2-estiril-4H-cromen-4-onas. Seguidamente são apresentados e discutidos os resultados da síntese de (E)-3-bromo-2-estiril-4H-cromen-4-onas através da reação de 5-aril-3-hidroxi-1-(2-hidroxifenil)penta-2,4-dien-1-onas com NBS, sob irradiação com micro-ondas, tendo sido estabelecida uma nova metodologia mais eficiente, rápida e regiosseletiva para a síntese de (E)-3-bromo-2-estiril-4H-cromen-4-onas, na ausência de solvente. São igualmente apresentados os resultados da síntese regiosseletiva de (E)-2-estiril-3-iodo-4H-cromen-4-onas através da reação de 5-aril-3-hidroxi-1-(2-hidroxifenil)penta-2,4-dien-1-onas com NIS e TFA/TFAA/NaOAc. Em ambos os métodos de halogenação desenvolvidos, obtiveram-se como produtos secundários as (E)-2-estiril-4H-cromen-4-onas correspondentes. Seguidamente é apresentado o estudo da reação de (E)-2-estiril-3-halo-4H-cromen-4-onas com hidrato de hidrazina. Ao contrário do esperado, obtiveram-se os 3(5)-aril-5(3)-[2-(2-hidroxifenil)-2-oxoetil-1H-pirazóis através de uma reação de adição conjugada 1,6-, de hidrazina à posição C- da cromona com consequente abertura do anel, seguida de uma adição conjugada 1,4- intramolecular. Estes resultados demonstraram que esta reação segue um mecanismo diferente daquele que está reportado na literatura para a reação de (E)-2-estiril-4H-cromen-4-onas não halogenadas em C-3 com hidrato de hidrazina. No terceiro capítulo apresenta-se uma breve revisão bibliográfica sobre as propriedades, aplicações e metodologias de síntese de 1,2,3-triazóis, dando mais relevância às reações de cicloadição 1,3-dipolar e de “click-chemistry”. Seguidamente descrevem-se os resultados obtidos na reação de (E)-5(3)-estiril-3(5)-(2-hidroxifenil)-1H-pirazóis com a azida de sódio para obtenção de díades pirazol-1,2,3-triazol. No entanto esta reação deu origem a novos 5(3)-(2-aril-2-azidoetil)-3(5)-(2-hidroxifenil)-1H-pirazóis e não às díades pirazol-1,2,3-triazol pretendidas. Como o resultado não foi o esperado, desenvolveu-se outra metodologia de síntese, que envolve, num primeiro, a reação de (E)-2-estiril-4H-cromen-4-onas com azida de sódio, dando origem a 5(4)-aril-4(5)-(cromon-2-il)-1H-1,2,3-triazóis. No passo seguinte, efetuou-se a reação destes compostos com hidrato de hidrazina tendo ocorrido a formação das diades 5(4)-aril-4(5)-[3(5)-(2-hidroxifenil)-1H-pirazol-5(3)-il]-1H-1,2,3-triazol pretendidas. No quarto capítulo, estudou-se a reatividade de (E)-5(3)-estiril-3(5)-(2-hidroxifenil)-1H-pirazóis em reações de iodação com vista à obtenção de 4-iodo-1H-pirazóis. Apresenta-se uma breve revisão bibliográfica sobre os diferentes métodos descritos na literatura para a iodação de compostos heterocíclicos aromáticos, nomeadamente para a obtenção de 4-iodo-1H-pirazóis. Dos vários sistemas de iodação testados, o sistema oxidativo I2/CAN foi o que deu melhores resultados na iodação dos (E)-5(3)-estiril-3(5)-(2-hidroxifenil)-1H-pirazóis. Este método permitiu iodar a posição C-4 do núcleo de pirazol apenas para os derivados que possuem o grupo nitro ou o átomo de cloro no anel do grupo estirilo, obtendo-se o 3(5)-(2-hidroxifenil)-4-iodo-5(3)-(4-nitrofenil)vinil-1H-pirazol e o 5(3)-(4-clorofenil)vinil)-3(5)-(2-hidroxi-5-iodofenil)-4-iodo-1H-pirazol; no entanto, para os restantes derivados, verificou-se apenas a iodação nas posições ativadas do anel fenólico. Todos os novos compostos sintetizados foram caraterizados estruturalmente recorrendo a estudos de espetroscopia de ressonância magnética nuclear (RMN) mono e bidimensionais. Sempre que possível, para uma caraterização estrutural mais completa, foram efetuados espetros de massa (EM) e análises elementares ou espetros de massa de alta resolução (EMAR) para todos os novos compostos sintetizados. Finalmente são apresentadas as conclusões gerais deste trabalho e perspetivas futuras.
Resumo:
In the present work multilayered micro/nanocrystalline (MCD/NCD) diamond coatings were developed by Hot Filament Chemical Vapour Deposition (HFCVD). The aim was to minimize the surface roughness with a top NCD layer, to maximize adhesion onto the Si3N4 ceramic substrates with a starting MCD coating and to improve the mechanical resistance by the presence of MCD/NCD interfaces in these composite coatings. This set of features assures high wear resistance and low friction coefficients which, combined to diamond biocompatibility, set this material as ideal for biotribological applications. The deposition parameters of MCD were optimized using the Taguchi method, and two varieties of NCD were used: NCD-1, grown in a methane rich gas phase, and NCD-2 where a third gas, Argon, was added to the gas mixture. The best combination of surface pre-treatments in the Si3N4 substrates is obtained by polishing the substrates with a 15 μm diamond slurry, further dry etching with CF4 plasma for 10 minutes and final ultrasonic seeding in a diamond powder suspension in ethanol for 1 hour. The interfaces of the multilayered CVD diamond films were characterized with high detail using HRTEM, STEM-EDX and EELS. The results show that at the transition from MCD to NCD a thin precursor graphitic film is formed. On the contrary, the transition of the NCD to MCD grade is free of carbon structures other than diamond, as a result of the richer atomic hydrogen content and of the higher substrate temperature for MCD deposition. At those transitions, WC nanoparticles were found due to contamination from the filament, being also present at the first interface of the MCD layer with the silicon nitride substrate. In order to study the adhesion and mechanical resistance of the diamond coatings, indentation and particle jet blasting tests were conducted, as well as tribological experiments with homologous pairs. Indentation tests proved the superior behaviour of the multilayered coatings that attained a load of 800 N without delamination, when compared to the mono and bilayered ones. The multilayered diamond coatings also reveal the best solid particle erosion resistance, due to the MCD/NCD interfaces that act as crack deflectors. These results were confirmed by an analytical model on the stress field distribution based on the von Mises criterion. Regarding the tribological testing under dry sliding, multilayered coatings also exhibit the highest critical load values (200N for Multilayers with NCD-2). Low friction coefficient values in the range μ=0.02- 0.09 and wear coefficient values in the order of ~10-7 mm3 N-1 m-1 were obtained for the ball and flat specimens indicating a mild wear regime. Under lubrication with physiological fluids (HBSS e FBS), lower wear coefficient values ~10-9-10-8 mm3 N-1 m-1) were achieved, governed by the initial surface roughness and the effective contact pressure.
Resumo:
K0.5Na0.5NbO3 (KNN), is the most promising lead free material for substituting lead zirconate titanate (PZT) which is still the market leader used for sensors and actuators. To make KNN a real competitor, it is necessary to understand and to improve its properties. This goal is pursued in the present work via different approaches aiming to study KNN intrinsic properties and then to identify appropriate strategies like doping and texturing for designing better KNN materials for an intended application. Hence, polycrystalline KNN ceramics (undoped, non-stoichiometric; NST and doped), high-quality KNN single crystals and textured KNN based ceramics were successfully synthesized and characterized in this work. Polycrystalline undoped, non-stoichiometric (NST) and Mn doped KNN ceramics were prepared by conventional ceramic processing. Structure, microstructure and electrical properties were measured. It was observed that the window for mono-phasic compositions was very narrow for both NST ceramics and Mn doped ceramics. For NST ceramics the variation of A/B ratio influenced the polarization (P-E) hysteresis loop and better piezoelectric and dielectric responses could be found for small stoichiometry deviations (A/B = 0.97). Regarding Mn doping, as compared to undoped KNN which showed leaky polarization (P-E) hysteresis loops, B-site Mn doped ceramics showed a well saturated, less-leaky hysteresis loop and a significant properties improvement. Impedance spectroscopy was used to assess the role of Mn and a relation between charge transport – defects and ferroelectric response in K0.5Na0.5NbO3 (KNN) and Mn doped KNN ceramics could be established. At room temperature the conduction in KNN which is associated with holes transport is suppressed by Mn doping. Hence Mn addition increases the resistivity of the ceramic, which proved to be very helpful for improving the saturation of the P-E loop. At high temperatures the conduction is dominated by the motion of ionized oxygen vacancies whose concentration increases with Mn doping. Single crystals of potassium sodium niobate (KNN) were grown by a modified high temperature flux method. A boron-modified flux was used to obtain the crystals at a relatively low temperature. XRD, EDS and ICP analysis proved the chemical and crystallographic quality of the crystals. The grown KNN crystals exhibit higher dielectric permittivity (29,100) at the tetragonal-to-cubic phase transition temperature, higher remnant polarization (19.4 μC/cm2) and piezoelectric coefficient (160 pC/N) when compared with the standard KNN ceramics. KNN single crystals domain structure was characterized for the first time by piezoforce response microscopy. It could be observed that <001> - oriented potassium sodium niobate (KNN) single crystals reveal a long range ordered domain pattern of parallel 180° domains with zig-zag 90° domains. From the comparison of KNN Single crystals to ceramics, It is argued that the presence in KNN single crystal (and absence in KNN ceramics) of such a long range order specific domain pattern that is its fingerprint accounts for the improved properties of single crystals. These results have broad implications for the expanded use of KNN materials, by establishing a relation between the domain patterns and the dielectric and ferroelectric response of single crystals and ceramics and by indicating ways of achieving maximised properties in KNN materials. Polarized Raman analysis of ferroelectric potassium sodium niobate (K0.5Na0.5)NbO3 (KNN) single crystals was performed. For the first time, an evidence is provided that supports the assignment of KNN single crystals structure to the monoclinic symmetry at room temperature. Intensities of A′, A″ and mixed A′+A″ phonons have been theoretically calculated and compared with the experimental data in dependence of crystal rotation, which allowed the precise determination of the Raman tensor coefficients for (non-leaking) modes in monoclinic KNN. In relation to the previous literature, this study clarifies that assigning monoclinic phase is more suitable than the orthorhombic one. In addition, this study is the basis for non-destructive assessments of domain distribution by Raman spectroscopy in KNN-based lead-free ferroelectrics with complex structures. Searching a deeper understanding of the electrical behaviour of both KNN single crystal and polycrystalline materials for the sake of designing optimized KNN materials, a comparative study at the level of charge transport and point defects was carried out by impedance spectroscopy. KNN single crystals showed lower conductivity than polycrystals from room temperature up to 200 ºC, but above this temperature polycrystalline KNN displays lower conductivity. The low temperature (T < 200 ºC) behaviour reflects the different processing conditions of both ceramics and single crystals, which account for less defects prone to charge transport in the case of single crystals. As temperature increases (T > 200 ºC) single crystals become more conductive than polycrystalline samples, in which grain boundaries act as barriers to charge transport. For even higher temperatures the conductivity difference between both is increased due to the contribution of ionic conduction in single crystals. Indeed the values of activation energy calculated to the high temperature range (T > 300 ºC) were 1.60 and 0.97 eV, confirming the charge transport due to ionic conduction and ionized oxygen vacancies in single crystals and polycrystalline KNN, respectively. It is suggested that single crystals with low defects content and improved electromechanical properties could be a better choice for room temperature applications, though at high temperatures less conductive ceramics may be the choice, depending on the targeted use. Aiming at engineering the properties of KNN polycrystals towards the performance of single crystals, the preparation and properties study of (001) – oriented (K0.5Na0.5)0.98Li0.02NbO3 (KNNL) ceramics obtained by templated grain growth (TGG) using KNN single crystals as templates was undertaken. The choice of KNN single crystals templates is related with their better properties and to their unique domain structure which were envisaged as a tool for templating better properties in KNN ceramics too. X-ray diffraction analysis revealed for the templated ceramics a monoclinic structure at room temperature and a Lotgering factor (f) of 40% which confirmed texture development. These textured ceramics exhibit a long range ordered domain pattern consisting of 90º and 180º domains, similar to the one observed in the single crystals. Enhanced dielectric (13017 at TC), ferroelectric (2Pr = 42.8 μC/cm2) and piezoelectric (d33 = 280 pC/N) properties are observed for textured KNNL ceramics as compared to the randomly oriented ones. This behaviour is suggested to be due to the long range ordered domain patterns observed in the textured ceramics. The obtained results as compared with the data previously reported on texture KNN based ceramics confirm that superior properties were found due to ordered repeated domain pattern. This study provides an useful approach towards properties improvement of KNN-based piezoelectric ceramics. Overall, the present results bring a significant contribution to the pool of knowledge on the properties of sodium potassium niobate materials: a relation between the domain patterns and di-, ferro-, and piezo-electric response of single crystals and ceramics was demonstrated and ways of engineering maximised properties in KNN materials, for example by texturing were established. This contribution is envisaged to have broad implications for the expanded use of KNN over the alternative lead-based materials.
Resumo:
Niobium oxides have been pointed as an alternative to tantalum in the production of solid electrolytic capacitors, with advantages regarding the dielectric constant, density and price. In this work, it is intended to create a new family of niobium oxides based capacitors, adapting the technology and production line currently used with tantalum. Despite the known potentialities of niobium oxides, and many types of niobates, in several technological applications, the understanding of these oxide systems is still noticeably insufficient. Hence, a careful bibliographic review is shown, which evidences the complexity of these materials, the difficulty in identifying of their different phases and polymorphs, as well as in the interpretation of their properties. In this context, several fundamental studies on niobium oxides are presented, namely structural, microstructural, optical and electrical characterizations, which allow not only to contribute in an important way for the general knowledge of the physical properties of these materials, but also to advance to a sustained development of the niobium oxides based solid electrolytic capacitors. Several processing parameters were studied, clearing the way towards the creation of a prototype. It was also decided to perform a preliminary study on the synthesis and characterization of other oxide systems based in niobium, namely rare-earth orthoniobates (RENbO4), which interest has been related to their optical properties and protonic conductivity. Hence, single and polycrystalline samples of RENbO4 were synthesized and characterized structural, optical and electrically, leaving open an interesting future work.
Resumo:
Phosphatidylserine (PS) is a member of the class of phospholipids, and is distributed among all cells of mammalians, playing important roles in diverse biological processes, including blood clotting and apoptosis. When externalized, PS is a ligand that is recognized on apoptotic cells. It has been considered that before externalization PS is oxidized and oxPS enhance the recognition by macrophages receptors, however the knowledge about oxidation of PS is still limited. PS, like others phospholipids, has two fatty acyl chains and one polar head group, in this case is the amino acid serine. The modifications in PS structure can occur by oxidation of the unsaturated fatty acyl chains and by glycation of the polar head group, due to free amine group, thus increasing the susceptibility to oxidative events. The main goal of this work was to characterize and identify oxidized and glycoxidized PS, contributing to the knowledge of the biological role of oxidation products of PS, as well as of glycated PS, in immune and inflammatory processes. To achieve this goal, PS standards (1-palmitoyl-2-oleoyl-sn-glycero-3-phospho- L-serine (POPS), 1,2-dipalmitoyl-sn-glycero-3-phospho-L-serine (DPPS), 1- palmitoyl-2-linoleoyl-sn-glycero-3-phospho-L-serine (PLPS) and 1-palmitoyl-2- arachidonoyl-sn-glycero-3-phospho-L-serine (PAPS)) and glycated PS (PAPS and POPS) were induced to oxidize in model systems, using different oxidant reagents: HO• and 2,2'-azobis-2-methyl-propanimidamide dihydrochloride (AAPH) . The detailed structural characterization of the oxidative products was performed by ESI-MS and MS/MS coupled to separation techniques such as off line TLC-MS and on line LC-MS, in order to obtained better characterization of the larger number of PS and glycated PS oxidation products. The results obtained in this work allowed to identify several oxidation products of PS and glycated PS with modifications in unsaturated fatty acyl chain. Also, oxidation products formed due to structural changes in the serine polar head with formation of terminal acetamide, terminal hydroperoxyacetaldehyde.and terminal acetic acid (glycerophosphacetic acid, GPAA) were identified. The mass spectrometric specific fragmentation pathway of each type of oxidation product was determined using different mass spectrometry approaches. Based on the identified fragmentation pathways, targeted lipidomic analysis was performed to detect oxidation products modified in serine polar head in HaCaT cell line treated with AAPH. The GPAA was detected in HaCaT cells treated with AAPH to induce oxidative stress, thus confirming that modifications in PS polar head is possible to occur in biological systems. Furthermore, it was found that glycated PS species are more prone to oxidative modifications when compared with non glycated PS. During oxidation of glycated PS, besides the oxidation in acyl chains, new oxidation products due to oxidation of the glucose moiety were identified, including PS advanced glycation end products (PSAGES). To investigate if UVA oxidative stress exerted changes in the lipidome of melanoma cell lines, particularly in PS profile, a lipidomic analysis was performed. The lipid profile was obtained using HILIC-LC-MS and GC-MS analysis of the total lipid extracts obtained from human melanoma cell line (SKMEL- 28) after UVA irradiation at 0, 2 and 24 hours. The results did not showed significant differences in PS content. At molecular level, only PS (18:0:18:1) decreased at the moment of irradiation. The most significant changes in phospholipids content occurred in phosphatidylcholines (PC) and phosphatidylinositol (PI) classes, with an increase of mono-unsaturated fatty acid (MUFA), similarly as observed for the fatty acid analysis. Overall, these data indicate that the observed membrane lipid changes associated with lipogenesis after UVA exposure may be correlated with malignant transformations associated with cancer development and progression. Despite of UVA radiation is associated with oxidative damage, in this work was not possible observe oxidation phospholipids. The anti/pro-inflammatory properties of the oxidized PLPS (oxPLPS) versus non-oxidized PLPS were tested on LPS stimulated RAW 264.7 macrophages. The modulation of intracellular signaling pathways such as NF-kB and MAPK cascades by oxPLPS and PS was also examined in this study. The results obtained from evaluation of anti/pro-inflammatory properties showed that neither PLPS or oxPLPS species activated the macrophages. Moreover only oxidized PLS were found to significantly inhibit NO production and iNOS and il1β gene transcription induced by LPS. The analysis at molecular level showed that this was the result of the attenuation of LPS-induced c-Jun-N-terminal kinase (JNK) and p65 NF-kB nuclear translocation. Overall these data suggest that oxPLPS, but not native PLPS, mitigates pro-inflammatory signaling in macrophages, contributing to containment of inflammation during apoptotic cell engulfment. The results obtained in this work provides new information on the modifications of PS, facilitating the identification of oxidized species in complex samples, namely under physiopathologic conditions and also contributes to a better understanding of the role of oxPS and PS in the inflammatory response, in the apoptotic process and other biological functions.
Resumo:
A 16mm moving image work and expanded cinema performance co-commissioned by Tate Modern and Arnolfini. Shot at the post-production facilities of Pinewood studios, London, the close-up sequences feature abstract patterns of optical sound encoded as light, printed onto the soundtrack area of the filmstrip. The film features the quivering light of a 16mm mono and a 35mm stereo optical sound camera, providing a seismic glimpse at a sound-wave in formation, on occasions flashing like a stroboscopic Rorschach inkblot. Performances: Tate Modern Oil Tanks (London 2012); Arnfolini (Bristol 2012); Kunstnernes Hus, (Oslo 2013). Exhibitions: Two-person exhibition at Castlefield Gallery, (Manchester 2013). Screenings: Mini-retrospective screening and in conversation with Lis Rhodes, Tate Britain (London 2014); Mini-retrospective screening, DIM Cinema, The Cinematheque (Vancouver 2015); Mini-retrospective at Whitechapel Gallery (London 2016); Mini-retrospective screening, Gertrude Contemporary (Melbourne 2016).
Resumo:
Dissertação de Mestrado, Engenharia Eléctrica e Electrónica, Ramo de Tecnologias de Informação e Telecomunicações, Instituto Superior de Engenharia, Universidade do Algarve, 2009
Resumo:
Com o presente estudo pretendeu-se conhecer as relações entre o estilo parental a saúde e o bem-estar nos adolescentes Cabo-verdianos. Trata-se de um estudo de natureza observacional, descritivo e transversal. Foi utilizada uma amostra, não probabilística, constituída por 236 adolescentes de ambos os sexos, com idades compreendidas entre os 14 e os 18 anos. Como instrumento de recolha de dados utilizou-se o KIDSCREEN 52 para aferir a auto-percepção do nível de bem-estar e saúde dos adolescentes Cabo-verdianos e a Escala de Estilos de Socializaçión Parental en la Adolescencia (ESPA29) para conhecer o estilo parental adoptado pelos pais segundo a perspectiva dos filhos. O estudo permitiu concluir que os filhos de famílias biparentais não referem, de um modo geral, melhor qualidade de vida, do que os filhos de famílias monoparentais. O que mais influencia a percepção de Qualidade de Vida Relacionada com a Saúde (QVRS) dos adolescentes Cabo-verdianos é a situação profissional do pai e da mãe: estar empregado. Os estilos parentais do pai e da mãe são percepcionados como semelhantes e são independentes do facto da família ser mono ou biparental. A percepção da QVRS dos adolescentes está relacionada com o estilo “Aceitação / Implicação” no caso do pai e, no que se refere à mãe relacionada tanto com estilo “Aceitação / Implicação” como com o estilo “Coerção / Imposição”.
Resumo:
The Mediterranean Diet concept was formulated during the sixties, in association with the food consumption pattern of Mediterranean areas that produced olive oil and shared common health styles. These areas, besides their own cultural and religious differences, share common food habits, such as: - The use of olive oil (supplier of monounsaturated fatty acids and antioxidants); - The abundant use of cereals, mainly under the form of excellent quality bread, flour and pasta (providing fibre and energy); - Large and variegate consumption of fruit (fresh and dried), nuts and vegetables (colourful, rich in fibre, antioxidants and other protective materials); - Abundant use of herbs and spices (rich in antioxidants and other protective materials); - Simple culinary methods, using short cooking times and low temperatures (which enhance the preservation of food nutritional and sensorial characteristics). The Mediterranean Diet reflects a set of characteristics that make it internationally recognized as a health promoter eating pattern, where the relation between monounsaturated and saturated fatty acids is highly advantageous for the former, fibre, vitamins and natural antioxidants intake is high, together with a low consumption of animal protein and salt. The obtained results show contents in protein, lipid and carbohydrates very adequate to the “DRI”; The relation between mono and saturated fatty acids (40:9) should be emphasised, together with the high fibre content. Protective nutrients show remarkable results, with a wide variety of vitamins and minerals, in particular Vitamin A, complex B vitamins, biotin, vit. E, folic acid, iron, manganese and selenium, that are widely recognised as important antioxidants and responsible for the good function of the immune system. In conclusion, tomato soup, consumed traditionally as a poor meal, shows to be a health promoter nutritionally complete recipe.
Resumo:
A good practice guide to creating and sustaining mixed income communities in Scotland. This guide explores how to create attractive and well-managed places that meet the needs of all sections of the community. Drawing on the latest research, and featuring 11 case studies from Scotland and England, it offers a comprehensive guide to the issues that need to be planned for and addressed. The book includes detailed guidance on: -Developing a strategy and negotiating the planning process; -Good practice in masterplanning, design, layout and long-term financial viability; -How stakeholders can collaborate effectively and ensure that local residents are fully involved at all stages; -How barriers to the development of sustainable communities might be overcome. The guide explores all types of mixed income communities, from the diversification of mono-tenure estates in inner city areas to greenfield development on the urban fringe.
Resumo:
Cappadocian Greek is reported to display agglutinative inflection in its nominal system, namely, mono-exponential formatives for the marking of case and number, and NOM.SG-looking forms as the morphemic units to which inflection applies. Previous scholarship has interpreted these developments as indicating a shift in morphological type from fusion to agglutination, brought about by contact with Turkish. This study takes issue with these conclusions. By casting a wider net over the inflectional system of the language, it shows that, of the two types of agglutinative formations identified, only one evidences a radical departure from the inherited structural properties of Cappadocian noun inflection. The other, on the contrary, represents a typologically more conservative innovation. The study presents evidence that a combination of system-internal and -external motivations triggered the development of both types, it describes the mechanisms through which the innovation was implemented, and discusses the factors that favoured change.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)