Sustainability and research integrated in engineering courses at Dalarna University, Sweden

Högskolepedagogik, högskolepedagogisk utbildning, BHU

Demonstration of Solar Heating and Cooling System using Sorption Integrated Solar Thermal Collectors

Producing cost-competitive small and medium-sized solar cooling systems is currently a significant challenge. Due to system complexity, extensive engineering, design and equipment costs; the installation costs of solar thermal cooling systems are prohibitively high. In efforts to overcome these limitations, a novel sorption heat pump module has been developed and directly integrated into a solar thermal collector. The module comprises a fully encapsulated sorption tube containing hygroscopic salt sorbent and water as a refrigerant, sealed under vacuum with no moving parts. A 5.6m2 aperture area outdoor laboratory-scale system of sorption module integrated solar collectors was installed in Stockholm, Sweden and evaluated under constant re-cooling and chilled fluid return temperatures in order to assess collector performance. Measured average solar cooling COP was 0.19 with average cooling powers between 120 and 200 Wm-2 collector aperture area. It was observed that average collector cooling power is constant at daily insolation levels above 3.6 kWhm-2 with the cooling energy produced being proportional to solar insolation. For full evaluation of an integrated sorption collector solar heating and cooling system, under the umbrella of a European Union project for technological innovation, a 180 m2 large-scale demonstration system has been installed in Karlstad, Sweden. Results from the installation commissioned in summer 2014 with non-optimised control strategies showed average electrical COP of 10.6 and average cooling powers between 140 and 250 Wm-2 collector aperture area. Optimisation of control strategies, heat transfer fluid flows through the collectors and electrical COP will be carried out in autumn 2014.

Steel Sheet Applications and Integrated Heat Management

Increasing energy use has caused many environmental problems including global warming. Energy use is growing rapidly in developing countries and surprisingly a remarkable portion of it is associated with consumed energy to keep the temperature comfortable inside the buildings. Therefore, identifying renewable technologies for cooling and heating is essential. This study introduced applications of steel sheets integrated into the buildings to save energy based on existing technologies. In addition, the proposed application was found to have a considerable chance of market success. Also, satisfying energy needs for space heating and cooling in a single room by using one of the selected applications in different Köppen climate classes was investigated to estimate which climates have a proper potential for benefiting from the application. This study included three independent parts and the results related to each part have been used in the next part. The first part recognizes six different technologies through literature review including Cool Roof, Solar Chimney, Steel Cladding of Building, Night Radiative Cooling, Elastomer Metal Absorber, and Solar Distillation. The second part evaluated the application of different technologies by gathering the experts’ ideas via performing a Delphi method. The results showed that the Solar Chimney has a proper chance for the market. The third part simulated both a solar chimney and a solar chimney with evaporation which were connected to a single well insulated room with a considerable thermal mass. The combination was simulated as a system to estimate the possibility of satisfying cooling needs and heating needs in different climate classes. A Trombe-wall was selected as a sample design for the Solar Chimney and was simulated in different climates. The results implied that the solar chimney had the capability of reducing the cooling needs more than 25% in all of the studied locations and 100% in some locations with dry or temperate climate such as Mashhad, Madrid, and Istanbul. It was also observed that the heating needs were satisfied more than 50% in all of the studied locations, even for the continental climate such as Stockholm and 100% in most locations with a dry climate. Therefore, the Solar Chimney reduces energy use, saves environment resources, and it is a cost effective application. Furthermore, it saves the equipment costs in many locations. All the results mentioned above make the solar chimney a very practical and attractive tool for a wide range of climates.

Manager's task to support integrated autonomy at the workplace : Results from an intervention

A new managerial task arises in today’s working life: to provide conditions for and influence interaction between actors and thus to enable the emergence of organizing structure in tune with a changing environment. We call this the enabling managerial task. The goal of this paper is to study whether training first line managers in the enabling managerial task could lead to changes in the work for the subordinates. This paper presents results from questionnaires answered by the subordinates of the managers before and after the training. The training was organized as a learning network and consisted of eight workshops carried out over a period of one year (September 2009–June 2010), where the managers met with each other and the researchers once a month. Each workshop consisted of three parts, during three and a half hours. The first hour was devoted to joint reflection on a task that had been undertaken since the last workshop; some results were presented from the employee pre-assessments, followed by relevant theory and illuminating practices, finally the managers created new tasks for themselves to undertake during the following month. The subordinates’ answers show positive change in all of the seventeen scales used to assess it. The improvements are significant in scales measuring the relationship between the manager and the employees, as well as in those measuring interaction between employees. It is concluded that the result was a success for all managers that had the possibility of using the training in their management work.

On the EA-style integrated processing of self-contained mathematical texts

A sound and complete first-order goal-oriented sequent-type calculus is developed with ``large-block'' inference rules. In particular, the calculus contains formal analogues of such natural proof-search techniques as handling definitions and applying auxiliary propositions.

Newly Automated System For Integrated Assessment Of The Conditions Of Underwater Gas Pipelines

An underwater gas pipeline is the portion of the pipeline that crosses a river beneath its bottom. Underwater gas pipelines are subject to increasing dangers as time goes by. An accident at an underwater gas pipeline can lead to technological and environmental disaster on the scale of an entire region. Therefore, timely troubleshooting of all underwater gas pipelines in order to prevent any potential accidents will remain a pressing task for the industry. The most important aspect of resolving this challenge is the quality of the automated system in question. Now the industry doesn't have any automated system that fully meets the needs of the experts working in the field maintaining underwater gas pipelines. Principle Aim of this Research: This work aims to develop a new system of automated monitoring which would simplify the process of evaluating the technical condition and decision making on planning and preventive maintenance and repair work on the underwater gas pipeline. Objectives: Creation a shared model for a new, automated system via IDEF3; Development of a new database system which would store all information about underwater gas pipelines; Development a new application that works with database servers, and provides an explanation of the results obtained from the server; Calculation of the values MTBF for specified pipelines based on quantitative data obtained from tests of this system. Conclusion: The new, automated system PodvodGazExpert has been developed for timely and qualitative determination of the physical conditions of underwater gas pipeline; The basis of the mathematical analysis of this new, automated system uses principal component analysis method; The process of determining the physical condition of an underwater gas pipeline with this new, automated system increases the MTBF by a factor of 8.18 above the existing system used today in the industry.

Integrated Marketing and Strategic Resources

As institutions seek in to increase enrollments, they create centralized marketing offices that oversee all institutional branding. This report examines staff and technology resources necessary to support centralized marketing efforts. It also describes advertising spend mixes and the assessment of integrated marketing initiatives.

Proposta de modelo teórico de treinamento e desenvolvimento de colaboradores nas empresas de transformação industrial: cadeias do cliente, fornecedor, valor, extended supply chain, innovation chain, integrated supply chain e supply chain

Trata de propor um modelo teórico de treinamento & desenvolvimento para a efetiva disseminação dos conceitos pertinentes ao integrated supply chain centrado no homem, observando as vertentes científicometodológica, digital, econõnu ca, psicológica, social e técnica e embasado na teoria do impacto, que compreende o ambiente de trabalho, experiência do aprendizado e características individuais. Com base nesse modelo, o autor advoga a necessidade de transformar os modelos de pesquisa, desenvolvimento e difusão, interação social e tomada de decisão e resolução de problemas ~ropostos por Havelock na década de 60, respectivamente, em Disseminação, Facilitação e Inovação.

A Framework supporting collaboration on the distributed design of integrated systems

The work described in this thesis aims to support the distributed design of integrated systems and considers specifically the need for collaborative interaction among designers. Particular emphasis was given to issues which were only marginally considered in previous approaches, such as the abstraction of the distribution of design automation resources over the network, the possibility of both synchronous and asynchronous interaction among designers and the support for extensible design data models. Such issues demand a rather complex software infrastructure, as possible solutions must encompass a wide range of software modules: from user interfaces to middleware to databases. To build such structure, several engineering techniques were employed and some original solutions were devised. The core of the proposed solution is based in the joint application of two homonymic technologies: CAD Frameworks and object-oriented frameworks. The former concept was coined in the late 80's within the electronic design automation community and comprehends a layered software environment which aims to support CAD tool developers, CAD administrators/integrators and designers. The latter, developed during the last decade by the software engineering community, is a software architecture model to build extensible and reusable object-oriented software subsystems. In this work, we proposed to create an object-oriented framework which includes extensible sets of design data primitives and design tool building blocks. Such object-oriented framework is included within a CAD Framework, where it plays important roles on typical CAD Framework services such as design data representation and management, versioning, user interfaces, design management and tool integration. The implemented CAD Framework - named Cave2 - followed the classical layered architecture presented by Barnes, Harrison, Newton and Spickelmier, but the possibilities granted by the use of the object-oriented framework foundations allowed a series of improvements which were not available in previous approaches: - object-oriented frameworks are extensible by design, thus this should be also true regarding the implemented sets of design data primitives and design tool building blocks. This means that both the design representation model and the software modules dealing with it can be upgraded or adapted to a particular design methodology, and that such extensions and adaptations will still inherit the architectural and functional aspects implemented in the object-oriented framework foundation; - the design semantics and the design visualization are both part of the object-oriented framework, but in clearly separated models. This allows for different visualization strategies for a given design data set, which gives collaborating parties the flexibility to choose individual visualization settings; - the control of the consistency between semantics and visualization - a particularly important issue in a design environment with multiple views of a single design - is also included in the foundations of the object-oriented framework. Such mechanism is generic enough to be also used by further extensions of the design data model, as it is based on the inversion of control between view and semantics. The view receives the user input and propagates such event to the semantic model, which evaluates if a state change is possible. If positive, it triggers the change of state of both semantics and view. Our approach took advantage of such inversion of control and included an layer between semantics and view to take into account the possibility of multi-view consistency; - to optimize the consistency control mechanism between views and semantics, we propose an event-based approach that captures each discrete interaction of a designer with his/her respective design views. The information about each interaction is encapsulated inside an event object, which may be propagated to the design semantics - and thus to other possible views - according to the consistency policy which is being used. Furthermore, the use of event pools allows for a late synchronization between view and semantics in case of unavailability of a network connection between them; - the use of proxy objects raised significantly the abstraction of the integration of design automation resources, as either remote or local tools and services are accessed through method calls in a local object. The connection to remote tools and services using a look-up protocol also abstracted completely the network location of such resources, allowing for resource addition and removal during runtime; - the implemented CAD Framework is completely based on Java technology, so it relies on the Java Virtual Machine as the layer which grants the independence between the CAD Framework and the operating system. All such improvements contributed to a higher abstraction on the distribution of design automation resources and also introduced a new paradigm for the remote interaction between designers. The resulting CAD Framework is able to support fine-grained collaboration based on events, so every single design update performed by a designer can be propagated to the rest of the design team regardless of their location in the distributed environment. This can increase the group awareness and allow a richer transfer of experiences among them, improving significantly the collaboration potential when compared to previously proposed file-based or record-based approaches. Three different case studies were conducted to validate the proposed approach, each one focusing one a subset of the contributions of this thesis. The first one uses the proxy-based resource distribution architecture to implement a prototyping platform using reconfigurable hardware modules. The second one extends the foundations of the implemented object-oriented framework to support interface-based design. Such extensions - design representation primitives and tool blocks - are used to implement a design entry tool named IBlaDe, which allows the collaborative creation of functional and structural models of integrated systems. The third case study regards the possibility of integration of multimedia metadata to the design data model. Such possibility is explored in the frame of an online educational and training platform.

Intrinsic and relational perspectives of relationship value: an integrated framework in buyer-supplier relationships

O relacionamento entre firmas vem sendo estudado como um fator que amplia os limites do valor criado pelas firmas individualmente, por meio da construção conjunta de benefícios que não poderia ocorrer caso o relacionamento não se estabelecesse. O valor total criado no nível da díade, que é capturado pelas partes, é o valor do relacionamento. Os benefícios obtidos transcendem as características financeiras da transação, podendo converter-se em outros aspectos da relação entre as firmas, tais como capacitação técnica, oferta de serviços, capacidade de inovação e reputação. Os recursos compartilhados e trocados entre as partes são fontes de criação de valor no relacionamento, mas originam-se de duas perspectivas diferentes. Eles podem pertencer previamente a uma delas, compondo um valor que é intrínseco, ou desenvolverem-se ao longo do relacionamento em si, resultando numa parcela de valor relacional. Neste contexto, este estudo propõe-se a investigar as diferentes características das partes que são fonte de criação de valor em um relacionamento, bem como analisar os aspectos que influenciam sua captura pelas partes. O estudo envolveu três etapas. A primeira, de cunho teórico, visou a explorar as dimensões do valor do relacionamento, no que se refere à sua definição e suas fontes. As duas etapas seguintes objetivaram testar empiricamente o efeito das fontes do valor do relacionamento na criação e captura de valor, por meio de uma survey transversal e um estudo de casos múltiplos. A perspectiva teórica que permeia o estudo é a Visão Baseada em Recursos, uma vez que ela pressupõe que os recursos das firmas produzem valor econômico que transcende os limites delas e é capturado por seus clientes e fornecedores. A abordagem ontológica é a do realismo crítico, a qual permite um melhor entendimento dos acontecimentos empiricamente observados. Os resultados contribuem para um melhor entendimento teórico sobre valor do relacionamento, uma vez que os construtos de valor intrínseco e valor relacional integram diferentes fontes de benefícios que podem advir de relacionamentos. A relação entre esses construtos e sua influência individual na captura de valor também trazem uma contribuição teórica ao estudo de relacionamentos comprador-fornecedor. As principais contribuições gerenciais dizem respeito ao fato de que é possível capturar valor mesmo que o relacionamento não seja colaborativo. Adicionalmente, os resultados enfatizam que as empresas deveriam explorar mais como fazer para extrair mais benefícios da outra parte e do relacionamento em si, em especial de fontes não-financeiras.

A sociometric analysis for the creation of an integrated multicultural work team

This research aimed to apply the sociometric theory and its methodology to create an integrated multicultural work team. The study focused on the application of the sociometry theory, developed by Jacob L. Moreno in 1934, to analyze the small multicultural group. In the beginning, a review of the literature was done to have a better understanding of Sociometric Theory as well as the modern tools and software developed to analyze and map the social networks. After this part of the study, the qualitative study was done, in which 26 students from 12 countries, which studied together in a Corporate International Master (2014-2015), developed by Georgetown University’s McDonough School of Business, Corporate Master of Business Administration from ESADE Business School and FGV/EBAPE, were surveyed and asked them to choose people, among the selected group, who they attracted, rejected or they were neutral towards, in 4 different scenarios: work team, leadership, trip (leisure time) and personal problem. Additionally, there were, two questions asked about how they felt when they answered the survey and which question(s) was/were difficult to answer and why. The focus on these two questions was to understand the emotional state of the respondents when they answered the survey and related this emotional state to the Sociometric Theory. The sociometric matrix, using Microsoft Excel, was created using the answers and the total of the positive, negative and neutral choices were analyzed for each scenario as well as the mutualities and incongruences of the choices. Furthermore, the software Kumu was used to analyze the connections between the people in the selected group using three metrics: size, degree centrality and indegree. Also Kumu was used to draw the social maps or sociometric maps. Using the relationship level analyses of the sociometric matrix and maps, it was possible to create an integrated multicultural work team. In the end, the results obtained suggest that it is possible to apply the sociometric methodology to study the relationships inside companies, project teams and work teams and identify the best work team based on the interrelationship between the people as well as the lack of communication among the team members, project team or inside the company as a whole.

Analysis an development of a prototype based on media wiki and semantic media wiki integrated with a design modeling that allows modeling of organizations based on demo

In a world where organizations are ever more complex the need for the knowledge of the organizational self is a growing necessity. The DEMO methodology sets a goal in achieving the specification of the organizational self capturing the essence of the organization in way independent of its implementation and also coherent, consistent, complete, modular and objective. But having such organization self notion is of little meaning if this notion is not shared by the organization actors. To achieve this goal in a society that has grown attached to technology and where time is of utmost importance, using a tool such as a semantic Wikipedia may be the perfect way of making the information accessible. However, to establish DEMO methodology in such platform there is a need to create bridges between its modeling components and semantic Wikipedia. It’s in that aspect that our thesis focuses, trying to establish and implement, using a study case, the principles of a way of transforming the DEMO methodology diagrams in comprehensive pages on semantic Wikipedia but keeping them as abstract as possible to allow expansibility and generalization to all diagrams without losing any valuable information so that, if that is the wish, those diagrams may be recreated from the semantic pages and make this process a full cycle.

Integrated valorization of Anona Cherimola Mill. seeds

Agricultural and agro-industrial residues are often considered both an environmental and an economical problem. Therefore, a paradigm shift is needed, assuming residues as biorefinery feedstocks. In this work cherimoya (Annona cherimola Mill.) seeds, which are lipid-rich (ca. 30%) and have a significant lignocellulosic fraction, were used as an example of a residue without any current valorization. Firstly, the lipid fraction was obtained by solvent extraction. Extraction yield varied from 13% to 28%, according to the extraction method and time, and solvent purity. This oil was converted into biodiesel (by base-catalyzed transesterification), yielding 76 g FAME/100 g oil. The obtained biodiesel is likely to be incorporated in the commercial chain, according to the EN14214 standard. The remaining lignocellulosic fraction was subjected to two alternative fractionation processes for the selective recovery of hemicellulose, aiming different products. Empirical mathematical models were developed for both processes, aiming future scale-up. Autohydrolysis rendered essentially oligosaccharides (10 gL-1) with properties indicating potential food/feed/pharmacological applications. The remaining solid was enzymatically saccharified, reaching a saccharification yield of 83%. The hydrolyzate obtained by dilute acid hydrolysis contained mostly monosaccharides, mainly xylose (26 gL-1), glucose (10 gL-1) and arabinose (3 gL-1), and had low content of microbial growth inhibitors. This hydrolyzate has proven to be appropriate to be used as culture media for exopolisaccharide production, using bacteria or microbial consortia. The maximum conversion of monosaccharides into xanthan gum was 0.87 g/g and kefiran maximum productivity was 0.07 g.(Lh)-1. This work shows the technical feasibility of using cherimoya seeds, and materials as such, as potential feedstocks, opening new perspectives for upgrading them in the biorefinery framework.