Development, design and validation of solid reference samples.

We developed a method of sample preparation using epoxy compound, which was validated in two steps. First, we studied the homogeneity within samples by scanning tubes filled with radioactive epoxy. We found within-sample homogeneity better than 2%. Then, we studied the homogeneity between samples during a 4.5 h dispensing time. The homogeneity between samples was found to be better than 2%. This study demonstrates that we have a validated method, which assures the traceability of epoxy samples.

Temporal variability of soil water content under different surface conditions in the semiarid region of the Pernambuco state

Rainfall in the semiarid region of Pernambuco is characterized by irregular distribution in time and space, which significantly hinders the rainfed agriculture in the region. This work aims to evaluate the temporal profile of soil moisture in the semiarid region of the Pernambuco State (Brazil) and the effect of different soil surface conditions on soil water content variation and the yield of rainfed beans. To monitor soil water content, five plots 4.5 m wide by 11 m long were installed in a Yellow Argisol (Ultisol). The following treatments were adopted in the experimental plots: natural vegetation, bean intercropped with cactus, beans planted down the slope, beans planted along contour lines with mulch and rock barriers, and bare soil. In each plot, eight PVC access tubes were installed for monitoring the soil water content profile at depths of 0.20 and 0.40 m using a neutron probe device. The surface condition significantly influenced the soil water content variation, both in the dry and rainy seasons. The use of mulch, associated with rock barriers, provided higher soil water content levels than the other treatments and increased the rainfed beans production.

Polymer-induced tubulation in lipid vesicles

A mechanism of extraction of tubular membranes from a lipid vesicle is presented. A concentration gradient of anchoring amphiphilic polymers generates tubes from budlike vesicle protrusions. We explain this mechanism in the framework of the Canham-Helfrich model. The energy profile is analytically calculated and a tube with a fixed length, corresponding to an energy minimum, is obtained in a certain regime of parameters. Further, using a phase-field model, we corroborate these results numerically. We obtain the growth of tubes when a polymer source is added, and the budlike shape after removal of the polymer source, in accordance with recent experimental results.

Comparison of the methane oxidation rate in four media

Landfill gas emissions are one of the main sources of anthropogenic methane (CH4), a major greenhouse gas. In this paper, an economically attractive alternative to minimize greenhouse gas emissions from municipal solid waste landfills was sought. This alternative consists in special biofilters as landfill covers with oxidative capacity in the presence of CH4. To improve the quality/cost ratio of the project, compost was chosen as one of the cover substrates and soil (Typic red yellow-silt-clay Podzolic) as the other. The performance of four substrates was studied in laboratory experiments: municipal solid waste (MSW) compost, soil, and two soil-compost at different proportions. This study aimed to evaluate the suitability and environmental compatibility as a means of CH4 oxidation in biofilters. Four biofilters were constructed in 60 cm PVC tubes with an internal diameter of 10 cm. Each filter contained 2.3 L of oxidizing substrate at the beginning of the experiment. The gas used was a mixture of CH4 and air introduced at the bottom of each biofilter, at a flow of 150 mL min-1, by a flow meter. One hundred days after the beginning of the experiment, the best biofilter was the MSW compost with an oxidation rate of 990 g m-3 day-1 , corresponding to an efficiency of 44 %. It can be concluded that the four substrates studied have satisfactory oxidative capacity, and the substrates can be used advantageously as cover substrate of MSW landfills.

Parity violation in Aharonov-Bohm systems: The spontaneous Hall effect

We show how macroscopic manifestations of P (and T) symmetry breaking can arise in a simple system subject to Aharonov-Bohm interactions. Specifically, we study the conductivity of a gas of charged particles moving through a dilute array of flux tubes. The interaction of the electrons with the flux tubes is taken to be of a purely Aharonov-Bohm type. We find that the system exhibits a nonzero transverse conductivity, i.e., a spontaneous Hall effect. This is in contrast to the fact that the cross sections for both scattering and bremsstrahlung (soft-photon emission) of a single electron from a flux tube are invariant under reflections. We argue that the asymmetry in the conductivity coefficients arises from many-body effects. On the other hand, the transverse conductivity has the same dependence on universal constants that appears in the quantum Hall effect, a result that we relate to the validity of the mean-field approximation.

Cost limitation through constrained oviposition site in a plant-pollinator/seed predator mutualism

Mutualism often involves reciprocal exploitation due to individual selection for increased benefits even at the expense of the partner. Therefore, stability and outcomes of such interactions crucially depend on cost limitation mechanisms. In the plant, pollinator /seed predator interaction between Silene latifolia (Caryophyllaceae) and Hadena bicruris (Lepidoptera: Noctuidae), moths generate pollination benefits as adults but impose seed predation costs as larvae. We examined whether floral morphology limits over-exploitation by constraining oviposition site. Oviposition site varies naturally inside vs. outside the corolla tube, but neither its determinants nor its effect on the interaction have been investigated. In a common garden with plants originating from eight populations, corolla tube length predicted oviposition site, but not egg presence or pollination efficiency, suggesting that long corolla tubes constrain the moth to lay eggs on petals. Egg position was also predicted by the combined effect of corolla tube and moth ovipositor lengths, with shorter ovipositor than corolla tube resulting in higher probability for eggs outside. Egg position on a given plant was repeatable over different exposure nights. When egg position was experimentally manipulated, eggs placed on the petal resulted in significantly fewer successful fruit attacks compared with eggs placed inside the corolla tube, suggesting differences in egg/larval mortality. Egg position also differently affected larval mass, fruit mass and fruit development. Our results indicate that constraining oviposition site through a long corolla tube reduces seed predation costs suffered by the plant without negatively affecting pollination efficiency and, hence may act to limit over-exploitation. However, the net effects of corolla tube depth variation on this interaction may fluctuate with extrinsic factors affecting egg mortality, and with patterns of gene flow affecting trait matching between the interacting species. The intermediate fitness costs incurred by both plant and insect associated with the different egg positions may reduce selective pressures for this interaction to evolve towards antagonism, favouring instead a mutualistic outcome. While a role for oviposition site variation in cost limitation is a novel finding in this system, it may apply more generally also to other mutualisms involving pollinating seed predators.

Rat insulin turnover in vivo

Zucker lean and obese rats were injected under pentobarbital anesthesia with 125I-labeled insulin; at timed intervals from 30 to 120 sec, blood samples were extracted and used for the estimation of insulin levels by RIA. A group of rats from each series was maintained under a constant infusion of noradrenaline. For each insulin determination, a duplicate blood sample containing the same amount of insulin as that used in the RIA, but without the radioactive label, was used as a blank for insulin measurement. The radioactivity in these tubes was then used for the measurement of insulin label per ml blood. From plasma label decay curves and insulin concentrations, the insulin pool size, half-life, and rate of degradation were calculated. Obese rats had higher insulin levels (2.43 nM) and showed less effect of noradrenaline than their lean counterparts, in which insulin distribution volume shrank with noradrenaline treatment. The half-life of plasma insulin was similar in all groups (range, 226-314 sec). Pool size and overall degradation rates were higher in obese (198 femtokatals) than in lean rats (28 femtokatals). It is postulated that obese rats synthesize and cleave much more insulin than lean controls despite their higher circulating levels of insulin.

Plasma leptin turnover rates in lean and obese Zucker rats

Conscious female adult lean and obese Zucker rats were injected through the jugular vein with radioactive iodine-labeled murine leptin; in the ensuing 8 min, four blood samples were sequentially extracted from the carotid artery. The samples were used in a modified RIA for leptin, in which paired tubes received the same amount of either labeled or unlabeled leptin, thus allowing us to estimate both leptin levels and specific radioactivity. The data were used to determine the decay curve parameters from which the half-life of leptin (5.46 ± 0.23 min for lean rats and 6.99 ± 0.75 min for obese rats) as well as the size of its circulating pool (32 pmol/kg for lean rats and 267 pmol/kg for obese rats) and the overall degradation rate (96 fkat/kg for lean rats and 645 fkat/kg for obese rats) were estimated. These values are consistent with the hormonal role of leptin and the need for speedy changes in its levels in response to metabolic challenge.

Mechanisms involved in the maintenance of inbreeding depression in gynodioecious "Silene vulgaris" (Caryophyllaceae): an experimental investigation

Summary Gynodioecy, the joint occurrence of females and hermaphrodites within natural populations, is a widely studied mating system ever since Darwin (1877). It is an exceptional mating system because continuous selection is necessary to maintain it. Since females only reproduce through ovules whereas hermaphrodites transmit genes through ovules and pollen, larger female fitness, in terms of seed output, is required to allow their maintenance. Two non-exclusive mechanisms can account for the maintenance of females. First, as females do not produce pollen they can reallocate their resources towards a higher ovule production. Second, hermaphrodites can self- and cross-fertilize whereas females are obligate outcrossers. Thus hermaphrodites should partly suffer from inbreeding depression (i.e.: the fitness decline of inbred relative to outbred individuals) and thereby produce less fit progeny than females. This thesis investigated the effects of self- and cross-fertilization of heimaphrodites over two consecutive generations. Inbreeding depression increased across the successive stages of the life- cycle (i.e.: from "seed traits" to "reproductive traits") displaying large inbreeding depression estimates (up to 0.76). This investigation not only detected large inbreeding depression estimates but also detected mechanisms involved in the maintenance of inbreeding depression. For instance cryptic self-incompatibility which is here a larger in vivo pollen performance of distant pollen compared to self-pollen; the expression of inbreeding depression especially in late life-cycle stages, and the appearance of females in the progeny of selfed hermaphrodites. The female biased sex ratio in the progeny of selfed hermaphrodites was a surprising result and could either come from the sex determining mechanisms (complex nucleo-cytoplasmic interaction(s)) and/or from inbreeding depression. Indeed, we not only got females and hermaphrodites but also partial male-sterile (PMS) individuals (i.e.: individuals with differing number of viable stamens). We detected that inbred pollen bearing plants (excluding females) have less viable stamens per flower than outbred plants. A positive correlation was detected between inbreeding depression for the number of viable stamens per flower and the difference in sex ratio between inbred and outbred individuals. A positive relationship was also detected between inbreeding depression for pollen viability and inbreeding depression for number of viable stamens per flower. Each correlation can either account for pleiotropic effects (a major gene acting on the two considered traits) or linkage disequilibrium between genes controlling each of the two related traits. If we hypothesize that these correlations are due to a major gene with pleiotropic effects, the positive relationship between inbreeding depression for number of viable stamens per flower and inbreeding depression for pollen viability showed that deleterious alleles present on a major gene coding for pollen production and viability depressed male fitness within inbred plants. The positive relationship between sex ratio difference between inbred and outbred individuals and inbreeding depression for number of viable stamens per flower indicates that (1) either number of viable stamens per flower is, in addition to inbreeding, also affected by the loci coding for sex determinism or, (2) the presence of females within the progeny of selfed hermaphrodites is a consequence of large inbreeding depression inhibiting pollen production, or (3) sex is here determined by a combination of loci coding for sex expression and inbreeding depression for male reproductive traits. In conclusion, Silene vulgaris has been shown to be a good model for understanding the evolution of mating systems that promote outbreeding. Résumé La gynodïoécie est définie comme étant la présence simultanée d'hermaphrodites et de femelles au sein de populations naturelles d'une même espèce. Ce système de reproduction a toujours fasciné le monde scientifique depuis Darwin, comme en témoigne ses écrits (1876, 1877) sur les systèmes de reproduction chez les plantes. Les femelles ne transmettent leurs gènes qu'à travers leurs ovules alors que les hermaphrodites transmettent leurs gènes à la fois par la voie mâle (le pollen) et la voie femelle (les ovules). La condition pour que la gynodïoécie se maintienne nécessite donc une fitness de la fonction femelle plus élevée chez les femelles que chez les hermaphrodites. Deux mécanismes mutuellement non exclusifs peuvent expliquer le maintien des femelles au sein de ces populations gynodioïques. D'une part, les femelles peuvent réallouer les ressources non utilisées pour la production de pollen et peuvent par conséquent produire plus d'ovules. D'autre part, la reproduction des femelles ne peut se faire que par allo-fécondation alors que les hermaphrodites, peuvent se reproduire à la fois par auto- et allo-fécondation. L'autofécondation s'accompagne en général d'une diminution de fitness de la descendance relativement à la progéniture issue d'allo-fécondation ; ce phénomène est connu sous le nom de dépression de consanguinité. Cette thèse avait pour but de mettre en évidence une éventuelle dépression de consanguinité chez Silene vulgaris, une espèce gynodioïque. Des hermaphrodites, issus de trois vallées alpines, ont été auto- et allo¬fécondés sur deux générations successives. La dépression de consanguinité pouvant s'exprimer à tous les stades de vie d'un individu, plusieurs traits de fitness, allant du nombre de graines par fruit à la production de gamètes ont été mesurés sur différents stades de vie successifs. L'estimation de la dépression de consanguinité totale atteignait des valeurs allant de 0.52 à 0.76 selon la vallée considérée, ce qui indiquerait que les hermaphrodites ont tout intérêt à limiter l'autofécondation et que les femelles ne devraient pas avoir de peine à subsister dans les vallées étudiées. Par la même occasion des mécanismes diminuant la purge potentielle du fardeau génétique, et permettant ainsi le maintien du « niveau » de dépression de consanguinité et par conséquence le maintien de la gynodïoécie ont été mis en évidence. En effet, nos résultats montrent que la dépression de consanguinité s'exprimait tard dans le cycle de vie permettant ainsi à un certain nombre individus consanguins de transmettre leurs allèles délétères à la génération suivante. D'autre part, la croissance in vivo des tubes polliniques d'auto-pollen était plus lente que celle de l'allo-pollen et donc en situation de compétition directe, les ovules devraient plutôt être issus d'allo-fécondation, diminuant ainsi les chances de purges d'allèles délétères. Enfin, l'apparition de femelles dans la progéniture d'hermaphrodites autofécondés diminue aussi les chances de purge d'allèles délétères. Il nous a été impossible de déterminer si l'apparition de femelles dans la descendance d'hermaphrodites autofécondés était due au déterminisme génétique du sexe ou si la différence de sexe ratio entre la descendance auto- et allo-fécondée était due à une éventuelle dépression de consanguinité inhibant la production de pollen. Nous avons observé que S. vulgaris ne présentaient pas uniquement des hermaphrodites et des femelles mais aussi toute sorte d'individus intermédiaires avec un nombre variable d'étamines viables. Nous avons pu mettre' en évidence des corrélations positives entre (1) la différence de sexe ratio (la proportion d'individus produisant du pollen) entre individus consanguins et non consanguins et une estimation de la dépression de consanguinité pour le nombre d'étamines viables d'individus produisant du pollen, ainsi qu'entre (2) la dépression de consanguinité pour le nombre d'étamines viables et celle estimée pour la viabilité du pollen. Chaque corrélation indique soit l'effet d'un (ou plusieurs) gène(s) pléiotropique(s), soit un déséquilibre de liaison entre les gènes. En considérant que ces corrélations sont le résultat d'effet pléiotropiques, la relation entre le nombre d'étamines viables par fleur et la viabilité du pollen, indiquerait un effet négatif de la consanguinité sur la production et la viabilité du pollen due partiellement à un gène majeur. La seconde corrélation indiquerait soit que les gènes responsables de la détermination du sexe agissent aussi sur l'expression de la fonction mâle soit que l'expression du sexe est sujette à la dépression de consanguinité, ou encore un mélange des deux. Aux regards de ces résultats, Silene vulgaris s'est avéré être un bon modèle de compréhension de l'évolution des systèmes de reproduction vers la séparation des sexes.

New magnetotelluric data trough the boundary between the Ossa Morena and Centroiberian Zones

The south-western part of the Iberian Peninsula, including the southern branch of the Iberian Massif, has recently been the subject of several magnetotelluric (MT) studies. This area is made up of three different tectonic terranes: the South Portuguese Zone (SPZ), the Ossa Morena Zone (OMZ) and the Central Iberian Zone (CIZ). The boundaries between these zones are considered to be sutures, which appear as high electrical conductivity anomalies in the MT surveys. The OMZ is characterised by a conductive layer at middle-lower crustal levels. To investigate the continuity of this conductive layer into the CIZ, a new MT profile was carried out. This 75-km long ENE profile goes through the boundary between the OMZ and the CIZ. The results of a two-dimensional magnetotelluric inversion revealed a high-conductivity anomaly in the transition OMZ/CIZ (the so-called Central Unit), which is interpreted as due to interconnected graphite along shear planes. High-conductivity anomalies appeared in the middle crust of the CIZ, whose geometry and location are consistent with the conductive layer previously found in the OMZ, thus confirming the prolongation of the conductive layer into the CIZ. The top of this layer correlated spatially with a broad reflector detected by a seismic profile previously acquired in the same area. This, together with other geological and petrological evidence, points to a common origin for both features.

Schwann cell strip for peripheral nerve repair.

Many strategies have been investigated to provide an ideal substitute to treat a nerve gap injury. Initially, silicone conduits were used and more recently conduits fabricated from natural materials such as poly-3-hydroxybutyrate (PHB) showed good results but still have their limitations. Surgically, a new concept optimising harvested autologous nerve graft has been introduced as the single fascicle method. It has been shown that a single fascicle repair of nerve grafting is successful. We investigated a new approach using a PHB strip seeded with Schwann cells to mimic a small nerve fascicle. Schwann cells were attached to the PHB strip using diluted fibrin glue and used to bridge a 10-mm sciatic nerve gap in rats. Comparison was made with a group using conventional PHB conduit tubes filled with Schwann cells and fibrin glue. After 2 weeks, the nerve samples were harvested and investigated for axonal and Schwann cell markers. PGP9.5 immunohistochemistry showed a superior nerve regeneration distance in the PHB strip group versus the PHB tube group (> 10 mm, crossed versus 3.17+/- 0.32 mm respectively, P<0.05) as well as superior Schwann cell intrusion (S100 staining) from proximal (> 10 mm, crossed versus 3.40+/- 0.36 mm, P<0.01) and distal (> 10 mm, crossed versus 2.91+/- 0.31 mm, P<0.001) ends. These findings suggest a significant advantage of a strip in rapidly connecting a nerve gap lesion and imply that single fascicle nerve grafting is advantageous for nerve repair in rats.

Visualization of aqueous shunt position and patency using anterior segment optical coherence tomography.

PURPOSE: To describe the use of anterior segment optical coherence tomography (AS-OCT) to clarify the position and patency of aqueous shunt devices in the anterior chamber of eyes where corneal edema or tube position does not permit a satisfactory view. DESIGN: Noncomparative observational case series. METHODS: Four cases are reported in which aqueous shunt malposition or obstruction was suspected but the shunt could not be seen on clinical examination. The patients underwent AS-OCT to identify the position and patency of the shunt tip. RESULTS: In each case, AS-OCT provided data regarding tube position and/or patency that could not be obtained by slit-lamp examination or by gonioscopy that influenced management. CONCLUSIONS: AS-OCT can be used to visualize anterior chamber tubes in the presence of corneal edema that precludes an adequate view or in cases where the tube is retracted into the cornea. In such cases, AS-OCT is useful in identifying shunt patency and position, which helps guide clinical decision making.

FiltekTM Silorane and FiltekTM Supreme XT resins: tissue reaction after subcutaneous implantation in isogenic mice

The aim of this study was to evaluate the tissue compatibility of a silorane-based resin system (FiltekTM Silorane) and a methacrylatebased nanoparticle resin (FiltekTM Supreme XT) after implantation in the subcutaneous connective tissue of isogenic mice. One hundred and thirty five male isogenic BALB/c mice were randomly assigned to 12 experimental and 3 control groups, according to the implanted material and the experimental period of 7, 21 and 63 days. At the end of each period, the animals were killed and the tubes with the surrounding tissues were removed and processed for microscopic analysis. Samples were subjected to a descriptive and a semi-quantitative analyses using a 4-point scoring system (0-3) to evaluate the collagen fiber formation and inflammatory infiltrate. Data were statistically analyzed using the Kruskal Wallis test (a=0.05). The results showed that there was no significant difference between the experimental and control groups considering the three evaluation periods (p>0.05). The silorane-based and the methacrylate-based nanoparticle resins presented similar tissue response to that of the empty tube (control group) after subcutaneous implantation in isogenic mice.

Pavement Instrumentation, HR-293, 1988

The report documents the development and installation of an instrumented pavement on I-80 in Iowa for the purposes of demonstration and answering current pavement questions. Its two primary objectives include documentation of the installation and verification of existing design procedures through monitoring of the continuous traffic stream reactions in the pavement. Some 120 instruments were installed in a forty foot segment of reconstructed pavement. The instruments included concrete strain gages, weldable strain gages on dowels, LVDT-deflection gages and temperature sensors in the concrete and base material. Five tubes were placed under three joints and two midslabs to measure the relative moisture and density at the interface between the pavement and base with atomic equipment. The instruments were placed ahead of the paving and over 92% of the instruments responded after paving. Planning requirements, problems encountered and costs of installation are presented. The site will use piezoelectric cables in a weigh-in-motion arrangement to trigger the data collection, a microcomputer controlled data acquisition system to analyze multiple sensors simultaneously, and telemetry to monitor the site remotely. Details provide the first time user of instrumentation with valuable information on the planning, problems, costs and coordination required to establish and operate such a site.

The making of frozen-hydrated, vitreous lamellas from cells for cryo-electron microscopy.

There has been a long standing desire to produce thick (up to 500 nm) cryo-sections of fully hydrated cells and tissue for high-resolution analysis in their natural state by cryo-transmission electron microscopy. Here, we present a method that can successfully produce sections (lamellas in FIB-SEM terminology) of fully hydrated, unstained cells from high-pressure frozen samples by focused ion beam (FIB) milling. The samples are therefore placed in thin copper tubes and vitrified by high-pressure freezing. For transfer, handling and subsequent milling, the tubes are placed in a novel connective device (ferrule) that protects the sample from devitrification and contamination and passes through all operation steps. A piezo driven sample positioning stage (cryo-nano-bench, CNB) with three degrees of freedom was additionally developed to enable accurate milling of frozen-hydrated lamellas. With the CNB, high-pressure frozen samples can be milled to produce either thin lamellas (<100 nm), for direct imaging by high-resolution cryo-TEM or thicker lamellas (300-500 nm) for cryo-electron tomography. The sample remains vitreous throughout the process by using the presented tools and methods. The results are an important step towards investigating larger cells and even tissue in there natural state which in the end will enable us to gain better insights into cellular processes.