An investigation of environmental conditions experienced during the life of high-value wood components and products

Australian forest industries have a long history of export trade of a wide range of products from woodchips (for paper manufacturing), sandalwood (essential oils, carving and incense) to high value musical instruments, flooring and outdoor furniture. For the high value group, fluctuating environmental conditions brought on by changes in temperature and relative humidity, can lead to performance problems due to consequential swelling, shrinkage and/or distortion of the wood elements. A survey determined the types of value-added products exported, including species and dimensions packaging used and export markets. Data loggers were installed with shipments to monitor temperature and relative humidity conditions. These data were converted to timber equilibrium moisture content values to provide an indication of the environment that the wood elements would be acclimatising to. The results of the initial survey indicated that primary high value wood export products included guitars, flooring, decking and outdoor furniture. The destination markets were mainly located in the northern hemisphere, particularly the United States of America, China, Hong Kong, Europe (including the United Kingdom), Japan, Korea and the Middle East. Other regions importing Australian-made wooden articles were south-east Asia, New Zealand and South Africa. Different timber species have differing rates of swelling and shrinkage, so the types of timber were also recorded during the survey. Results from this work determined that the major species were ash-type eucalypts from south-eastern Australia (commonly referred to in the market as Tasmanian oak), jarrah from Western Australia, spotted gum, hoop pine, white cypress, black butt, brush box and Sydney blue gum from Queensland and New South Wales. The environmental conditions data indicated that microclimates in shipping containers can fluctuate extensively during shipping. Conditions at the time of manufacturing were usually between 10 and 12% equilibrium moisture content, however conditions during shipping could range from 5 (very dry) to 20% (very humid). The packaging systems incorporated were reported to be efficient at protecting the wooden articles from damage during transit. The research highlighted the potential risk for wood components to ‘move’ in response to periods of drier or more humid conditions than those at the time of manufacturing, and the importance of engineering a packaging system that can account for the environmental conditions experienced in shipping containers. Examples of potential dimensional changes in wooden components were calculated based on published unit shrinkage data for key species and the climatic data returned from the logging equipment. The information highlighted the importance of good design to account for possible timber movement during shipping. A timber movement calculator was developed to allow designers to input component species, dimensions, site of manufacture and destination, to see validate their product design.

Contributo da filosofia Lean na redução do custo de uma peça metálica

Num mercado cada vez mais exigente e competitivo, torna-se imprescindível que as organizações otimizem continuamente os seus sistemas produtivos. Muitas têm visto nas filosofias e práticas Lean e Kaizen as respostas para conseguirem produzir mais sem acrescentar recursos, e de forma mais rápida, mais eficaz e mais eficiente. O envolvimento da empresa numa cultura de melhoria contínua orientada para o cliente permite a criação de valor em todas as etapas, tornando-a mais flexível e competitiva. Essa transformação cultural, aliada à aplicação de ferramentas Lean e Kaizen, permitem melhorar o desempenho global da organização, reduzindo os custos através do combate aos inibidores de performance: os desperdícios, os paradigmas, a inflexibilidade e a variabilidade. No presente trabalho pretende-se mostrar a aplicabilidade de algumas destas ferramentas no processo produtivo de um componente metálico para a indústria mobiliária, assim como os ganhos alcançados com esta abordagem. Ao longo de todo o projeto foram usadas diversas ferramentas Lean Manufacturing como organização do posto de trabalho (5S), Gestão Visual, troca rápida de ferramentas (SMED), mapeamento da cadeia de valor (VSM) e alterações de layouts (com recurso ao software Arena e AutoCad para estudar a alteração mais eficiente que permitisse uma maior produtividade com menor quantidade de recursos). Também se mostra igualmente a importância dos colaboradores no processo de mudança, através das iniciativas Kaizen, do programa de sugestões, dos inquéritos de satisfação e das ações de formação, para que eles se sintam parte integrante da organização.

Sistematics, population genetics, propagation and conservation of Picconia azorica (Tutin) Knobl. (Oleaceae)

Tese de Doutoramento, Biologia (Ecologia Vegetal), 24 de Junho de 2013, Universidade dos Açores.

Rotunda of the Breakers Hotel

The five-story Rotunda of the lobby of the Breakers Hotel provided a place for guests to relax and enjoy the hotel. Wicker furniture was imported from Europe. The Rotunda was also the scene of entertainment including impromptu concerts from Metropolitan Opera stars such as Enrico Caruso, who stopped at Cedar Point on their way to Chicago for the Met's summer season.

Children exposure to indoor ultrafine particles in urban and rural school environments

Extended exposure to ultrafine particles (UFPs) may lead to consequences in children due to their increased susceptibility when compared to older individuals. Since children spend in average 8 h/day in primary schools, assessing the number concentrations of UFPs in these institutions is important in order to evaluate the health risk for children in primary schools caused by indoor air pollution. Thus, the purpose of this study was to assess and determine the sources of indoor UFP number concentrations in urban and rural Portuguese primary schools. Indoor and outdoor ultrafine particle (UFP) number concentrations were measured in six urban schools (US) and two rural schools (RS) located in the north of Portugal, during the heating season. The mean number concentrations of indoor UFPs were significantly higher in urban schools than in rural ones (10.4 × 10(3) and 5.7 × 10(3) pt/cm(3), respectively). Higher UFP levels were associated with higher squared meters per student, floor levels closer to the ground, chalk boards, furniture or floor covering materials made of wood and windows with double-glazing. Indoor number concentrations of ultrafine-particles were inversely correlated with indoor CO2 levels. In the present work, indoor and outdoor concentrations of UFPs in public primary schools located in urban and rural areas were assessed, and the main sources were identified for each environment. The results not only showed that UFP pollution is present in augmented concentrations in US when compared to RS but also revealed some classroom/school characteristics that influence the concentrations of UFPs in primary schools.

Troilus and Cressida - A Scenic Design

The purpose of this thesis is to provide research, supporting paperwork, production photographs, and other materials that document the scenic design process for the production of William Shakespeare’s Troilus & Cressida by the University of Maryland – College Park, School of Theater, Dance, and Performance Studies. This thesis contains the following: scenic research images collected to express period, location, and emotional/intellectual landscapes to the production team; preliminary sketches; photographs of the ¼” scale model; a full set of drafting plates and paint elevations used to communicate the design to the technical director and paint charge; a unit list naming each scenic element; a props list and research book to detail each hand prop, furniture piece and consumable to the prop master; and, lastly, archival production photographs to document the completed design.

Manual de boas práticas ambientais para a indústria do mobiliário de madeira

Este trabalho tem como finalidade a elaboração de um projeto na área ambiental denominado Manual de Boas Práticas Ambientais para a Indústria do Mobiliário de Madeira. Para conseguir atingir o objetivo proposto, inicialmente foi efetuado um breve enquadramento ao subsetor do mobiliário de madeira a nível nacional, recorrendo à bibliografia disponível apoiada em dados estatísticos de suporte. Foram caracterizados os dois concelhos alvo de estudo, Paços de Ferreira e Paredes por apresentarem a maior concentração industrial no subsetor a nível nacional. Procedeu-se à descrição do processo produtivo da indústria do mobiliário de madeira com a identificação dos seus principais aspetos ambientais. Posteriormente foi aplicado um questionário para verificar como as empresas do subsetor nos concelhos alvo de estudo tratam as questões ambientais da sua atividade industrial. De forma complementar, realizou-se um caso de estudo na empresa IKEA Industry Portugal, Lda, onde foi elaborado um diagnóstico ambiental detalhado com incidência nas boas práticas ambientais. Finalmente foi elaborado o Manual de Boas Práticas Ambientais para a Indústria do Mobiliário de Madeira.

Alfama : Análise da paisagem urbana como expressão do património subunidade de estudo: Zona Ribeirinha, da Rua da Alfândega a Rua do Jardim do Tabaco

Esta investigação tem como contexto o bairro de Alfama, centrando-se em uma área específica situada na zona ribeirinha com início na Rua da Alfândega e se estendendo até a Rua do Jardim do Tabaco. É uma zona com relevante potencial turístico, mas com pouco dinamismo apesar dos vários atrativos que lá existem. O trabalho tem como objetivo analisar a paisagem urbana na subunidade de estudo citada acima de forma a descobrirmos através da leitura do espaço urbano uma identidade patrimonial para desta maneira propormos a sua valorização. Para facilitar o estudo dividimos a área em cinco trechos e através da observação in loco esboçarmos sua situação ao nível de morfologia urbana, das características espaciais, dos usos e do modo de apropriação do espaço pelas pessoas e pelas atividades, o estado de conservação do edificado, o mobiliário urbano e todas as características do seu entorno. Para a análise da paisagem fizemos um levantamento fotográfico digital e uma avaliação visual do percurso procurando enquadrar-se na leitura da paisagem estudada pelos autores Kevin Lynch e Gordon Cullen. O estudo também passa por uma avaliação dos seus aspectos significativos, ou seja, os registres de memórias que são pontos fortes da paisagem urbana. São aspectos que identificam o local e definem a sua legibilidade. Em paralelo elaboramos uma análise SWOT que contribuiu para entendermos o complexo de desafios que se colocam ao nosso universo de estudo e justificar o contributo desta dissertação através de propostas concretas de valorização. ABSTRACT; The context of this research is Alfama district, focusing on a specific area located on the waterfront starting at Alfândega Street and extending until Jardim do Tabaco Street. lt is an area with a relevant tourism potential, however with a small dynamic despite its many attractions. The research aim to study the urban landscape in the sub-unit mentioned above in order to uncover, through an urban reading, a patrimonial identity seeking its recovery. To facilitate the research, the area was divided into five sections and, by in loco observation, we outlined its position into a urban morphology rank, space characteristics, uses and appropriation of space by individuals and activities, conservation condition of the building, urban furniture and all the features of its surroundings. With regards the landscape study, was done a digital inventory and a visual evaluation of the route in quest of to fit it in the landscape studies by the authors Kevin Lynch and Gordon Cullen. The research also goes through an appraisal of its significant aspects, in other words, the memories records that are the strengths of the urban landscape. These are aspects that identify the location and define its readability. ln parallel we had developed a SWOT analysis which helped to understand the complex challenges in this universe of studies and justify the contribution of this thesis with concrete recovery proposals.

Industry wage survey.

Mode of access: Internet.

Câmara Municipal de Loures: uma experiência em arquitetura paisagista no sector público

O presente relatório de estágio reflete o trabalho realizado e a experiência adquirida ao longo de seis meses na Câmara Municipal de Loures. Os trabalhos desenvolvidos correspondem, sobretudo, ao que era pretendido por parte da Câmara Municipal tendo sido aplicados, em parte, os conhecimentos adquiridos ao longo da licenciatura e do mestrado em Arquitetura Paisagista na Universidade de Évora. Este relatório incide sobre a regulamentação do mobiliário urbano em todo o Município de Loures, na caracterização e proposta de intervenção para alguns espaços abertos pertencentes ao concelho e na importância da Arquitetura Paisagista no sector público; ABSTRACT: City Council of Loures: An Experience in Landscape Architecture in the Public Sector This internship report reflects the work done and experience gained over six months at the City Council of Loures. The work developed are primarily to what was intended by the City Council having been applied in part the knowledge acquired throughout the undergraduate and master's degree in Landscape Architecture at the University of Évora. This report focuses on the regulation of street furniture throughout the Loures Municipality, characterization and proposal of intervention for some open spaces belonging to the municipality and the importance of Landscape Architecture in the public sector.

Proposal for linking the school library of the School Education Unit Four Queens in the nursery of J. Francisco Public Library Orlich Tibás Canton, Heredia, Costa Rica

Since classical antiquity, the public library has been the institution that helps people to know their history and face the changes that society increasingly demands. Similarly, school libraries are piloting the learning of children; in them, manage to have their first contact with books, his first great travel stories with dinosaurs, robots, fiction, among others through the stories, legends and knowledge games. School libraries contribute to strengthening reading habits from the earliest years of life.In conducting the research, developed an assessment of the current situation of the two libraries under study, based on the following variables: services, human resources, budget, infrastructure, children's collection, furniture, electronic equipment and audiovisual, recreational interests, needs of information, socio-cultural characteristics and availability. This was achieved through the collection of information externada by children of preschool and junior, mothers or guardians and teachers of the Education Unit of Four Queens and in charge of the School Library Education Unit Four Queens (BEUPCR) and J. Francisco Public Library Orlich (BPFJO).According to the diagnosis and analysis of information, it is shown that the aspects related to personnel, electronic equipment and resources are limited, in addition, there were deficiencies in infrastructure BEUPCR.

Contributions to 3D Data Registration and Representation

Nowadays, new computers generation provides a high performance that enables to build computationally expensive computer vision applications applied to mobile robotics. Building a map of the environment is a common task of a robot and is an essential part to allow the robots to move through these environments. Traditionally, mobile robots used a combination of several sensors from different technologies. Lasers, sonars and contact sensors have been typically used in any mobile robotic architecture, however color cameras are an important sensor due to we want the robots to use the same information that humans to sense and move through the different environments. Color cameras are cheap and flexible but a lot of work need to be done to give robots enough visual understanding of the scenes. Computer vision algorithms are computational complex problems but nowadays robots have access to different and powerful architectures that can be used for mobile robotics purposes. The advent of low-cost RGB-D sensors like Microsoft Kinect which provide 3D colored point clouds at high frame rates made the computer vision even more relevant in the mobile robotics field. The combination of visual and 3D data allows the systems to use both computer vision and 3D processing and therefore to be aware of more details of the surrounding environment. The research described in this thesis was motivated by the need of scene mapping. Being aware of the surrounding environment is a key feature in many mobile robotics applications from simple robotic navigation to complex surveillance applications. In addition, the acquisition of a 3D model of the scenes is useful in many areas as video games scene modeling where well-known places are reconstructed and added to game systems or advertising where once you get the 3D model of one room the system can add furniture pieces using augmented reality techniques. In this thesis we perform an experimental study of the state-of-the-art registration methods to find which one fits better to our scene mapping purposes. Different methods are tested and analyzed on different scene distributions of visual and geometry appearance. In addition, this thesis proposes two methods for 3d data compression and representation of 3D maps. Our 3D representation proposal is based on the use of Growing Neural Gas (GNG) method. This Self-Organizing Maps (SOMs) has been successfully used for clustering, pattern recognition and topology representation of various kind of data. Until now, Self-Organizing Maps have been primarily computed offline and their application in 3D data has mainly focused on free noise models without considering time constraints. Self-organising neural models have the ability to provide a good representation of the input space. In particular, the Growing Neural Gas (GNG) is a suitable model because of its flexibility, rapid adaptation and excellent quality of representation. However, this type of learning is time consuming, specially for high-dimensional input data. Since real applications often work under time constraints, it is necessary to adapt the learning process in order to complete it in a predefined time. This thesis proposes a hardware implementation leveraging the computing power of modern GPUs which takes advantage of a new paradigm coined as General-Purpose Computing on Graphics Processing Units (GPGPU). Our proposed geometrical 3D compression method seeks to reduce the 3D information using plane detection as basic structure to compress the data. This is due to our target environments are man-made and therefore there are a lot of points that belong to a plane surface. Our proposed method is able to get good compression results in those man-made scenarios. The detected and compressed planes can be also used in other applications as surface reconstruction or plane-based registration algorithms. Finally, we have also demonstrated the goodness of the GPU technologies getting a high performance implementation of a CAD/CAM common technique called Virtual Digitizing.

Ergonomics as authoritarian or libertarian: Learning from colin ward's politics of design

Ergonomics is intrinsically connected to political debates about the good society, about how we should live. This article follows the ideas of Colin Ward by setting the practices of ergonomics and design along a spectrum between more libertarian approaches and more authoritarian. Within Anglo-American ergonomics, more authoritarian approaches tend to prevail, often against the wishes of designers who have had to fight with their employers for best possible design outcomes. The article draws on debates about the design and manufacturing of schoolchildren's furniture. Ergonomics would benefit from embracing these issues to stimulate a broader discourse amongst its practitioners about how to be open to new disciplines, particularly those in the social sciences.

Utilização de resíduo lignocelulósico na obtenção de chapa de madeira aglomerada homogênea e compósito reforçado com fibra de vidro-E

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

A Performance Management Framework for Managing Sustainable Collaborative Enterprise Networks

Part 15: Performance Management Frameworks