Alunos com altas habilidades: Valor preditivo dos critérios de identificação

A identificação dos alunos sobredotados e talentosos implica a ponderação e a adopção de critérios e procedimentos de avaliação que permitam caracterizar com validade os alunos sinalizados. Nesse sentido, a necessidade de contemplar várias fontes de informação pressupõe uma certa complexidade no processo de identificação, sendo que o recurso a uma identificação multi-referencial permite o alargamento do número de alunos que poderá beneficiar de medidas educativas. O principal objectivo desta comunicação é analisar e reflectir sobre os critérios utilizados para a sinalização e a avaliação de alunos com altas habilidades. Procuramos comparar os desempenhos ao nível do raciocínio cognitivo (BPR-5/6 e BPR-7/9) e académico (classificações escolares) de um grupo de alunos identificado com altas habilidades, quando frequentavam o 2º ciclo (5º e 6º ano) [conjugando critérios de avaliação ao nível da criatividade (TPCT), da cognição (BPR-5/6),da inteligência geral (TIG-1) e do rendimento académico (notas escolares)], com os seus desempenhos em anos lectivos posteriores, quando frequentam o 3º ciclo (8º e 9ºano). Além disso, consideramos nesta análise a percepção dos Directores de Turma ao nível da sinalização dos alunos (BISAST-NP e IDT). Genericamente, os resultados sugerem que nem todos os alunos identificados apresentam um elevado rendimento académico nos anos escolares posteriores e que os professores revelam alguma dificuldade na sinalização de alunos com altas habilidades, sendo os resultados dessa sinalização discrepantes face aos resultados nas provas psicológicas.

Alunos dos quadros de honra e excelência académica: estudo de caso no ensino secundário

O quadro de honra afixado nas escolas tem como objetivo primordial, assinalar os alunos que se destacam pelas atitudes e pelos resultados obtidos em diversas áreas da sua formação humana, académica e social. Nesse sentido, espera-se que a prestação destes alunos se paute por desempenhos elevados nessas áreas ao nível da excelência. Deste modo, propomo-nos realizar um estudo procurando conhecer de forma mais aprofundada algumas das suas caraterísticas que possam contribuir para a sua elevada realização. O grupo de participantes é formado por 10 jovens do ensino secundário de uma Escola Básica e Secundária da Região Autónoma da Madeira, sendo três alunos do 10º ano, cinco alunos do 11º ano e dois alunos do 12º ano, que constam no quadro de honra no ano letivo de 2010/2011 e que se disponibilizaram a participar no estudo. Apresentamos os dados recolhidos através da administração individual de um teste de inteligência (WISC-III), uma bateria de aptidões (BPR-10/12) um teste de criatividade (TTCT) e uma entrevista semiestruturada. Na análise dos resultados discutimos pontos de convergência e de diferenciação entre os participantes nos vários parâmetros avaliados. Os resultados encontrados permitem-nos tecer algumas considerações tomando como referência a caraterização de alunos com altas habilidades e a caraterização de excelência académica. Assim, os resultados obtidos parecem apontar para níveis de desempenho heterogéneos considerando os parâmetros avaliados em termos individuais ou de grupo, destacando-se uma superioridade do desempenho intelectual e académico em relação ao criativo, e a presença de elevada motivação e esforço por parte dos alunos. Finalizamos, estabelecendo uma ponte entre os resultados obtidos, as questões de investigação e a fundamentação teórica, apontando linhas orientadoras para investigações futuras no âmbito da psicologia da educação ou, mais concretamente, no desenvolvimento da excelência académica.

DEMO models based automatic workflow process generation

Nowadays, more than half of the computer development projects fail to meet the final users' expectations. One of the main causes is insufficient knowledge about the organization of the enterprise to be supported by the respective information system. The DEMO methodology (Design and Engineering Methodology for Organizations) has been proved as a well-defined method to specify, through models and diagrams, the essence of any organization at a high level of abstraction. However, this methodology is platform implementation independent, lacking the possibility of saving and propagating possible changes from the organization models to the implemented software, in a runtime environment. The Universal Enterprise Adaptive Object Model (UEAOM) is a conceptual schema being used as a basis for a wiki system, to allow the modeling of any organization, independent of its implementation, as well as the previously mentioned change propagation in a runtime environment. Based on DEMO and UEAOM, this project aims to develop efficient and standardized methods, to enable an automatic conversion of DEMO Ontological Models, based on UEAOM specification into BPMN (Business Process Model and Notation) models of processes, using clear semantics, without ambiguities, in order to facilitate the creation of processes, almost ready for being executed on workflow systems that support BPMN.

Fatores críticos de sucesso como antecedentes da aceitação de um sistema de informação em uma universidade federal

In recent decades the public sector comes under pressure in order to improve its performance. The use of Information Technology (IT) has been a tool increasingly used in reaching that goal. Thus, it has become an important issue in public organizations, particularly in institutions of higher education, determine which factors influence the acceptance and use of technology, impacting on the success of its implementation and the desired organizational results. The Technology Acceptance Model - TAM was used as the basis for this study and is based on the constructs perceived usefulness and perceived ease of use. However, when it comes to integrated management systems due to the complexity of its implementation,organizational factors were added to thus seek further explanation of the acceptance of such systems. Thus, added to the model five TAM constructs related to critical success factors in implementing ERP systems, they are: support of top management, communication, training, cooperation, and technological complexity (BUENO and SALMERON, 2008). Based on the foregoing, launches the following research problem: What factors influence the acceptance and use of SIE / module academic at the Federal University of Para, from the users' perception of teachers and technicians? The purpose of this study was to identify the influence of organizational factors, and behavioral antecedents of behavioral intention to use the SIE / module academic UFPA in the perspective of teachers and technical users. This is applied research, exploratory and descriptive, quantitative with the implementation of a survey, and data collection occurred through a structured questionnaire applied to a sample of 229 teachers and 30 technical and administrative staff. Data analysis was carried out through descriptive statistics and structural equation modeling with the technique of partial least squares (PLS). Effected primarily to assess the measurement model, which were verified reliability, convergent and discriminant validity for all indicators and constructs. Then the structural model was analyzed using the bootstrap resampling technique like. In assessing statistical significance, all hypotheses were supported. The coefficient of determination (R ²) was high or average in five of the six endogenous variables, so the model explains 47.3% of the variation in behavioral intention. It is noteworthy that among the antecedents of behavioral intention (BI) analyzed in this study, perceived usefulness is the variable that has a greater effect on behavioral intention, followed by ease of use (PEU) and attitude (AT). Among the organizational aspects (critical success factors) studied technological complexity (TC) and training (ERT) were those with greatest effect on behavioral intention to use, although these effects were lower than those produced by behavioral factors (originating from TAM). It is pointed out further that the support of senior management (TMS) showed, among all variables, the least effect on the intention to use (BI) and was followed by communications (COM) and cooperation (CO), which exert a low effect on behavioral intention (BI). Therefore, as other studies on the TAM constructs were adequate for the present research. Thus, the study contributed towards proving evidence that the Technology Acceptance Model can be applied to predict the acceptance of integrated management systems, even in public. Keywords: Technology

Análise do efeito do tempo da moagem de alta energia no tamanho de cristalito e microdeformação da rede cristalina do WC-Co

Hard metals are the composite developed in 1923 by Karl Schröter, with wide application because high hardness, wear resistance and toughness. It is compound by a brittle phase WC and a ductile phase Co. Mechanical properties of hardmetals are strongly dependent on the microstructure of the WC Co, and additionally affected by the microstructure of WC powders before sintering. An important feature is that the toughness and the hardness increase simultaneously with the refining of WC. Therefore, development of nanostructured WC Co hardmetal has been extensively studied. There are many methods to manufacture WC-Co hard metals, including spraying conversion process, co-precipitation, displacement reaction process, mechanochemical synthesis and high energy ball milling. High energy ball milling is a simple and efficient way of manufacturing the fine powder with nanostructure. In this process, the continuous impacts on the powders promote pronounced changes and the brittle phase is refined until nanometric scale, bring into ductile matrix, and this ductile phase is deformed, re-welded and hardened. The goal of this work was investigate the effects of highenergy milling time in the micro structural changes in the WC-Co particulate composite, particularly in the refinement of the crystallite size and lattice strain. The starting powders were WC (average particle size D50 0.87 μm) supplied by Wolfram, Berglau-u. Hutten - GMBH and Co (average particle size D50 0.93 μm) supplied by H.C.Starck. Mixing 90% WC and 10% Co in planetary ball milling at 2, 10, 20, 50, 70, 100 and 150 hours, BPR 15:1, 400 rpm. The starting powders and the milled particulate composite samples were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) to identify phases and morphology. The crystallite size and lattice strain were measured by Rietveld s method. This procedure allowed obtaining more precise information about the influence of each one in the microstructure. The results show that high energy milling is efficient manufacturing process of WC-Co composite, and the milling time have great influence in the microstructure of the final particles, crushing and dispersing the finely WC nanometric order in the Co particles

Desenvolvimento e implantação de um sistema de gestão de pedidos de informação endereçados à Universidade Federal do Rio Grande do Norte a partir do serviço de informações ao cidadão (E-SIC)

Among the numerous policy changes that the world has experienced in recent years, occupies a prominent place in the quest for greater transparency of public agencies. Transparency has been an important tool in the accountability of the State to promote greater participation of the society by providing information that was previously restricted knowledge of public agencies. Brazil, following this trend, promulgated in May 2012 the Access to Information Act that seeks to disclose the actions of the State at all levels, in all public administration agencies. On the same day of the enactment of the law is provided society with a site that is empowering citizens to make their requests for information to government agencies. The Federal University of Rio Grande do Norte, which at that time had no a tool to assist them in managing this demand. This project has the objective to describe, build and implement a solution to solve this problem using Design Science Research as methodology. As result, the solution built in this research became a new module of the institution s ERP became it capable to control the entire process, and will be helpful to others partners which use our system ERP

Ssitema integrado de gestão pública: proposta de implantação de um sistema integrado de gestão, autuação e distribuição de termos circunstanciados e inquéritos policiais entre os juizados especiais criminais e delegacias de Natal

Universidade Federal do Rio Grande do Norte

Uma análise de aspectos relacionados ao desenvolvimento e adoção de Enterprise Resources Planning livre de código aberto

Sistemas Integrados de Gestão ou Enterprise Resources Planning - ERP possibilitam o processamento das informações necessárias em uma empresa usando um único banco de dados. Muito tem se escrito sobre este tipo de software, abordando questões como o alto custo da aquisição de licenças, e a dependência de consultoria para a sua adaptação e implantação nas empresas. Atualmente vem crescendo o desenvolvimento e uso de ERP Livre de Código Aberto (FOS-ERP). Porém verifica-se que este tipo de sistema ainda não é suficientemente explorado, mesmo no meio acadêmico. Este artigo relata alguns trabalhos publicados sobre o assunto e levanta questões que devem ser tratadas por pesquisadores e demais interessados para adequar e viabilizar o uso desses sistemas conforme a realidade nacional. Assim, após uma introdução ao tema, são apresentadas algumas diferenças entre o FOS-ERP e seus equivalentes proprietários (Proprietary ERP ou P-ERP) em termos de modelos de negócios, seleção, customização e evolução. em seguida são elencados alguns desafios e oportunidades que o FOS-ERP pode oferecer a usuários, fornecedores, pesquisadores e colaboradores individuais. Concluindo, este artigo busca ampliar a discussão sobre FOS-ERP, destacando fatores tais como seu potencial de inovação tecnológica e estratégias de negócios.

Avaliação dos efeitos do biperideno, diazepam e neuropeptídeos S sobre a memória e a ansiedade na tarefa do labirinto em T elevado em camundongos

Anxiety is an emotional phenomenon, and normally it is interpreted as an adaptative behavior front to adversities. In its pathological form, anxiety can severely affect aspects related to the personal and professional life. Studies have shown a close relationship between anxiety disorders and aversive memory processing. Considering that the pharmacotherapy of anxiety disorders is still limited, innovative anxiolytic agents are needed. In this regard, neuropeptides systems are interesting therapeutic targets to the treatment of psychopathologies. Neuropeptide S (NPS), a 20-aminoacid peptide, is the endogenous ligand of a G-protein coupled receptor (NPSR), which has been reported to evoke hyperlocomotion, awakefull states, besides anxiolysis and memory improvements in rodents. This study aimed to investigate the effects of biperiden (BPR; an amnesic drug), diazepam (DZP; an anxiolytic drug) and NPS at three distinct times: pre-training, post-training, and pre-test, in order to assess anxiety and memory process in the same animal model. The elevated Tmaze (ETM) is an apparatus derived from the elevated plus-maze test, which consists of one enclosed and two open arms. The procedure is based on the avoidance of open spaces learned during training session, in which mice were exposed to the enclosed arm as many times as needed to stay 300 s. In the test session, memory is assessed by re-exposing the mouse to the enclosed arm and the latency to enter an open arm was recorded. When injected pre-training, BPR (1 mg/kg) impaired learning and memory processing; DZP (1 and 2 mg/kg) evoked anxiolysis, but only at the dose of 2 mg/kg impaired memory; and NPS 0.1 nmol induced anxiolysis without affecting memory. Post-training injection of DZP (2 mg/kg) or BPR (1 and 3 mg/kg) did not affect memory consolidation, while the post-trainning administration of NPS 1 nmol, but not 0.1 nmol, improved memory in mice. Indeed, pre-trainning administration of NPS 1 nmol did not prevent memory impairment elicited by BPR (2 mg/kg, injected before training). In the open field test, BPR 1 mg/kg and NPS 1 nmol induced hyperlocomotion in mice. In conclusion, the proposed ETM task is practical for the detection of the anxiolytic and amnesic effects of drugs. The anxiolytic and memory enhancement effects of NPS were detected in the ETM task, and reinforce the role of NPS system as an interesting therapeutic target to the treatment of anxiety disorders

Tissue Reaction to a Triantibiotic Paste Used for Endodontic Tissue Self-regeneration of Nonvital Immature Permanent Teeth

Introduction: The endodontic regenerative procedure (ERP), which is an alternative to calcium hydroxide induced apexification, involves the use of a triple antibiotic paste (TAP) as a dressing material. The aim of this study was to evaluate the response of rat subcutaneous tissue to implanted polyethylene tubes that were filled with TAP or calcium hydroxide. Methods: Thirty rats received 2 individual implants of polyethylene tubes filled with TAP or calcium hydroxide paste (CHP) and another empty tube as a control. Thirty additional rats received 2 individual implants consisting of polyethylene tubes filled with dressing material carriers (macrogol and propylene glycol) and a sham procedure. After 7, 15, 30, 60, and 90 days, 12 animals were euthanized, and the tubes and surrounding tissue were removed and processed for histology by using glycol methacrylate and stained with hematoxylin and eosin. The histological score ranged from 0 to 3 depending on the content of inflammatory cells; the fibrous capsule was considered thin or thick, and necrosis and calcification were recorded as present or absent. The results were analyzed using the Kruskal-Wallis test. Results: Both dressing materials induced moderate reactions at 7 and 15 days. These reactions were similar to the control (P>.05) and reduced in intensity (to mild) from day 30 onward (P>.05). The carriers did not interfere with the reaction of the dressing materials. Conclusions: TAP and CHP were biocompatible over the different experimental periods examined. (J Endod 2012;38:91-94)

A development process proposal for the ERP5 system

Modeling ERP software means capturing the information necessary for supporting enterprise management. This modeling process goes down through different abstraction layers, from enterprise modeling to code generation. Thus ERP is the kind of system where enterprise engineering undoubtedly has, or should have, a strong influence. For the case of Free/Open Source ERP, the lack of proper modeling methods and tools can jeopardize the advantage brought by source code availability. Therefore, the aim of this paper is to present a development process proposal for the Open Source ERP5 system. The proposed development process aims to cover different abstraction levels, taking into account well established standards and common practices, as well as platform issues. Its main goal is to provide an adaptable meta-process to ERP5 adopters. © 2006 IEEE.

Enterprise systems modeling: The ERP5 development process

The design and implementation of an ERP system involves capturing the information necessary for implementing the system's structure and behavior that support enterprise management. This process should start on the enterprise modeling level and finish at the coding level, going down through different abstraction layers. For the case of Free/Open Source ERP, the lack of proper modeling methods and tools jeopardizes the advantages of source code availability. Moreover, the distributed, decentralized decision-making, and source-code driven development culture of open source communities, generally doesn't rely on methods for modeling the higher abstraction levels necessary for an ERP solution. The aim of this paper is to present a model driven development process for the open source ERP ERP5. The proposed process covers the different abstraction levels involved, taking into account well established standards and common practices, as well as new approaches, by supplying Enterprise, Requirements, Analysis, Design, and Implementation workflows. Copyright 2008 ACM.

Microfinanzas en Honduras: realidad y retos para la definición de políticas

Incluye Bibliografía

High-yield direct synthesis of Mg 2FeH 6 from the elements by reactive milling

Magnesium complex hydrides as Mg 2FeH 6 are interesting phases for hydrogen storage in the solid state, mainly due to its high gravimetric and volumetric densities of H2. However, the synthesis of this hydride is not trivial because the intermetallic phase Mg2Fe does not exist and Mg and Fe are virtually immiscible under equilibrium conditions. In this study, we have systematically studied the influence of the most important processing parameters in reactive milling under hydrogen (RM) for Mg 2FeH 6 synthesis: milling time, ball-to-powder weight ratio (BPR), hydrogen pressure and type of mill. Low cost 2Mg-Fe mixtures were used as raw materials. An important control of the Mg 2FeH 6 direct synthesis by RM was attained. In optimized combinations of the processing parameters, very high proportions of the complex hydride could be obtained. © (2011) Trans Tech Publications.

Supply Chain Management practices in the electro-electronics sector in Brazil: Evolutionary approach, information technology adoption and management actions

This paper examines the current level of adoption of Supply Chain Management (SCM) practices in the electro-electronic sector in Brazil and aims to identify the management and Information Technology (IT) actions that have been implemented to support the adoption of those practices. An e-mail survey was conducted. Descriptive statistics techniques were employed for data analysis. This study makes contributions to the electro-electronics sector and to the topics related to SCM, such as identifi cation and level of adoption of SCM practices. Another contribution of this research is the investigation of whether approaches such as Enterprise Resources Planning (ERP), Workshop with Customers, Electronic Data Interchange (EDI), Workshop with Suppliers and electronic Kanban are commonly used to support SCM practices. So far, this is the fi rst research on SCM practices in the electro-electronics sector in Brazil. Copyright © 2012 Inderscience Enterprises Ltd.