History of cholelithiasis and cancer risk in a network of case-control studies.

Background We analyzed the relationship between cholelithiasis and cancer risk in a network of case-control studies conducted in Italy and Switzerland in 1982-2009. Methods The analyses included 1997 oropharyngeal, 917 esophageal, 999 gastric, 23 small intestinal, 3726 colorectal, 684 liver, 688 pancreatic, 1240 laryngeal, 6447 breast, 1458 endometrial, 2002 ovarian, 1582 prostate, 1125 renal cell, 741 bladder cancers, and 21 284 controls. The odds ratios (ORs) were estimated by multiple logistic regression models. Results The ORs for subjects with history of cholelithiasis compared with those without were significantly elevated for small intestinal (OR = 3.96), prostate (OR = 1.36), and kidney cancers (OR = 1.57). These positive associations were observed ≥10 years after diagnosis of cholelithiasis and were consistent across strata of age, sex, and body mass index. No relation was found with the other selected cancers. A meta-analysis including this and three other studies on the relation of cholelithiasis with small intestinal cancer gave a pooled relative risk of 2.35 [95% confidence interval (CI) 1.82-3.03]. Conclusion In subjects with cholelithiasis, we showed an appreciably increased risk of small intestinal cancer and suggested a moderate increased risk of prostate and kidney cancers. We found no material association with the other cancers considered.

Genetic control of iron concentration in Mesoamerican and Andean common bean seeds

The objective of this work was to evaluate the main differences in the genetic control of the iron concentration in Mesoamerican and Andean common bean seeds, in early generations, and to select recombinants with a high iron concentration in the seeds. F1, F1 reciprocal, F2, F2 reciprocal, and backcross (BC11 and BC12) generations were produced by crosses between Mesoamerican (CNFP 10104 x CHC 01-175) and Andean (Cal 96 x Hooter) inbred lines. The expression of significant maternal effect was observed for the Mesoamerican gene pool. Iron concentration was higher in the seed coat of Mesoamerican common bean seeds (54.61 to 67.92%) and in the embryo of Andean common bean seeds (69.40 to 73.44%). High broad-sense heritability was obtained for iron concentration in Mesoamerican and Andean common bean seeds. Gains with the selection of higher magnitude, from 20.39 to 24.58%, are expected in Mesoamerican common bean seeds. Iron concentration in common bean seeds showed a continuous distribution in F2, which is characteristic of quantitative inheritance in Mesoamerican and Andean common bean seeds. Recombinants with high iron concentration in seeds can be selected in both Mesoamerican and Andean common bean hybrids.

The epithelial sodium channel and the control of sodium balance.

Studies aiming at the elucidation of the genetic basis of rare monogenic forms of hypertension have identified mutations in genes coding for the epithelial sodium channel ENaC, for the mineralocorticoid receptor, or for enzymes crucial for the synthesis of aldosterone. These genetic studies clearly demonstrate the importance of the regulation of Na(+) absorption in the aldosterone-sensitive distal nephron (ASDN), for the maintenance of the extracellular fluid volume and blood pressure. Recent studies aiming at a better understanding of the cellular and molecular basis of ENaC-mediated Na(+) absorption in the distal part of nephron, have essentially focused on the regulation ENaC activity and on the aldosterone-signaling cascade. ENaC is a constitutively open channel, and factors controlling the number of active channels at the cell surface are likely to have profound effects on Na(+) absorption in the ASDN, and in the amount of Na(+) that is excreted in the final urine. A number of membrane-bound proteases, kinases, have recently been identified that increase ENaC activity at the cell surface in heterologous expressions systems. Ubiquitylation is a general process that regulates the stability of a variety of target proteins that include ENaC. Recently, deubiquitylating enzymes have been shown to increase ENaC activity in heterologous expressions systems. These regulatory mechanisms are likely to be nephron specific, since in vivo studies indicate that the adaptation of the renal excretion of Na(+) in response to Na(+) diet occurs predominantly in the early part (the connecting tubule) of the ASDN. An important work is presently done to determine in vivo the physiological relevance of these cellular and molecular mechanisms in regulation of ENaC activity. The contribution of the protease-dependent ENaC regulation in mediating Na(+) absorption in the ASDN is still not clearly understood. The signaling pathway that involves ubiquitylation of ENaC does not seem to be absolutely required for the aldosterone-mediated control of ENaC. These in vivo physiological studies presently constitute a major challenge for our understanding of the regulation of ENaC to maintain the Na(+) balance.

Stochasticity and bistability in horizontal transfer control of a genomic island in Pseudomonas.

Genomic islands (GEI) comprise a recently recognized large family of potentially mobile DNA elements and play an important role in the rapid differentiation and adaptation of bacteria. Most importantly, GEIs have been implicated in the acquisition of virulence factors, antibiotic resistances or toxic compound metabolism. Despite detailed information on coding capacities of GEIs, little is known about the regulatory decisions in individual cells controlling GEI transfer. Here, we show how self-transfer of ICEclc, a GEI in Pseudomonas knackmussii B13 is controlled by a series of stochastic processes, the result of which is that only a few percent of cells in a population will excise ICEclc and launch transfer. Stochastic processes have been implicated before in producing bistable phenotypic transitions, such as sporulation and competence development, but never before in horizontal gene transfer (HGT). Bistability is instigated during stationary phase at the level of expression of an activator protein InrR that lays encoded on ICEclc, and then faithfully propagated to a bistable expression of the IntB13 integrase, the enzyme responsible for excision and integration of the ICEclc. Our results demonstrate how GEI of a very widespread family are likely to control their transfer rates. Furthermore, they help to explain why HGT is typically confined to few members within a population of cells. The finding that, despite apparent stochasticity, HGT rates can be modulated by external environmental conditions provides an explanation as to why selective conditions can promote DNA exchange.

Combined effect of tobacco and alcohol on laryngeal cancer risk : a case-control study

OBJECTIVE: To provide information on the effects of alcohol and tobacco on laryngeal cancer and its subsites. METHODS: This was a case-control study conducted between 1992 and 2000 in northern Italy and Switzerland. A total of 527 cases of incident squamous-cell carcinoma of the larynx and 1297 hospital controls frequency-matched with cases on age, sex, and area of residence were included. Odds ratios (ORs) and corresponding 95% confidence intervals (CIs) were estimated using multiple logistic regression. RESULTS: In comparison with never smokers, ORs were 19.8 for current smokers and 7.0 for ex-smokers. The risk increased in relation to the number of cigarettes (OR = 42.9 for > or = 25 cigarettes/day) and for duration of smoking (OR = 37.2 for > or = 40 years). For alcohol, the risk increased in relation to number of drinks (OR = 5.9 for > or = 56 drinks per week). Combined alcohol and tobacco consumption showed a multiplicative (OR = 177) rather than an additive risk. For current smokers and current drinkers the risk was higher for supraglottis (ORs 54.9 and 2.6, respectively) than for glottis (ORs 7.4 and 1.8) and others subsites (ORs 10.9 and 1.9). CONCLUSIONS: Our study shows that both cigarette smoking and alcohol drinking are independent risk factors for laryngeal cancer. Heavy consumption of alcohol and cigarettes determined a multiplicative risk increase, possibly suggesting biological synergy.

Planning and control of internal development projects in a fast changing environment: Case study

Tutkimuksen tarkoituksena on kuvata ja ymmärtää kuinka sisäisiä kehityshankkeita voidaan hallita onnistuneesti kun toimitaan nopeasti muuttuvassa ympäristössä. Tutkimus kuvailee etenkin projekteille tärkeitä menestymistekijöitä, kuten suunnittelu, kontrollointi ja päätöksenteko. Tutkimus selvittää yleisimmät ongelma-alueet case-organisaation sisäisten kehityshankkeiden hallinnassa. Tutkimus on luonteeltaan laadullinen tutkimus, jossa tutkimusmenetelmänä on käytetty tapaustutkimusta. Empiirisessa osassa käsittellään case-organisaation sisäisiä informaatioteknologia-hankkeita (IT) ja uusien konseptien kehityshankkeita (NCD). iSisäisten kehityshankkeiden erilaisuuden ymmärtäminen oli tutkimuksen tärkein tulos. Tutkimuksen empiirinen osio osoitti sen, että epävarmuudella on erittäin suuri vaikutus projektihallintaan sekä projektin kontrollointiin. Case-organisaation IT-projektien onnistuminen riippuu organisaatiomuu-toksen onnistumisesta. Asiakkaisiin ja markkinoihin liittyvät epävarmuudet ovat vaikuttavimmat NCD projektien epävarmuuksista. Näillä epävarmuuk-sil­la on vaikutusta projektihallintaan jonka myötä NCD projektit juuttuvat useim­mi­ten noidankehiin tai ne lopetetaan jo aikaisessa vaiheessa.

Control of gene expression in melanocytes and RPE by conserved distal regulatory elements

Résumé Durant le développement embryonnaire, les cellules pigmentaires des mammifères se développent à partir de deux origines différentes : les melanocytes se développent à partir de la crête neurale alors que les cellules de la rétine pigmentaire (RP) ont une origine neuronale. Un grand nombre de gènes sont impliqués dans la pigmentation dont les gènes de la famille tyrosinase à savoir Tyr, Tyrp1 et Dct. Certaines études ont suggéré que les gènes de la pigmentation sont régulés de manière différentielle dans les mélanocytes et dans la RP. Dans ce travail, les gènes de la famille tyrosinase ont été étudiés comme modèle de la régulation des gènes de la pigmentation par des éléments régulateurs agissant à distance. II a été montré que le promoteur du gène Tyrp1pouvait induire l'expression d'un transgène uniquement dans la RP alors que ce gène est aussi exprimé dans les mélanocytes comme le montre le phénotype des souris mutantes pour Tyrp1. Ce résultat suggère que les éléments régulateurs du promoteur sont suffisants pour l'expression dans la RP mais pas pour l'expression dans les mélanocytes. J'ai donc cherché à identifier la séquence qui régule l'expression dans les mélanocytes. Un chromosome artificiel bactérien (CAB) contenant le gène Tyrp1 s'est avéré suffisant pour induire l'expression dans les mélanocytes, comme démontré par la correction du phénotype mutant. La séquence de ce CAB contient plusieurs régions très conservées qui pourraient représenter de nouveaux éléments régulateurs. Par la suite, j'ai focalisé mon analyse sur une séquence située à -I5 kb qui s'est révélée être un amplificateur spécifique aux mélanocytes comme démontré par des expériences de cultures cellulaire et de transgenèse. De plus, une analyse poussée de cet élément a révélé que le facteur de transcription Sox 10 représentait un transactivateur de cet amplificateur. Comme pour Tyrp1, la régulation du gène tyrosinase est contrôlée par différents éléments régulateurs dans les mélanocytes et la RP. Il a été montré que le promoteur de tyrosinase n'était pas suffisant pour une forte expression dans les mélanocytes et la RP. De plus, l'analyse de la région située en amont a révélé la présence d'un amplificateur nécessaire à l'expression dans les mélanocytes à la position -15 kb. Cet amplificateur n'est toutefois pas actif dans la RP mais agit comme un répresseur dans ces cellules. Ces résultats indiquent que certains éléments nécessaires à l'expression dans les deux types de cellules pigmentaires sont absents de ces constructions. Comme pour Tyrp1, j'ai en premier lieu démontré qu'un CAB était capable de corriger le phénotype albinique, puis ai inséré un gène reporter (lacZ) dans le CAB par recombinaison homologue et ai finalement analysé l'expression du reporter en transgenèse. Ces souris ont montré une expression forte du lacZ dans les mélanocytes et la RP, ce qui indique que le CAB contient les séquences régulatrices nécessaires à l'expression correcte de tyrosinase. Afin de localiser plus précisément les éléments régulateurs, j'ai ensuite généré des délétions dans le CAB et analysé l'expression du lacZ en transgenèse. La comparaison de séquences génomiques provenant de différentes espèces a permis par la suite d'identifier des régions représentant de nouveaux éléments régulateurs potentiels. En utilisant cette approche, j'ai identifié une région qui se comporte comme un amplificateur dans la RP et qui est nécessaire à l'expression de tyrosinase dans ce tissu. De plus, j'ai identifié les facteurs de transcription Mitf et Sox10 comme transactivateurs de l'amplificateur spécifique aux mélanocytes situé à -15 kb. L'identification et la caractérisation des ces éléments régulateurs des gènes tyrosinase et Tyrp1confirme donc que la régulation différentielle des gènes dans les mélanocytes et la RP est liée à des éléments régulateurs séparés. Summary Pigment cells of mammals originate from two different lineages: melanocytes arise from the neural crest, whereas cells of the retinal pigment epithelium (RPE) originate from the optic cup of the developing forebrain. A large set of genes are involved in pigmentation, including the members of the tyrosinase gene family, namely tyrosinase, Tyrp1 and Dct. Previous studies have suggested that pigmentation genes are differentially regulated in melanocytes and RPE. In this work, the tyrosinase gene family was used as a model for studying the involvement of distal regulatory elements in pigment cell-specific gene expression. The promoter of the Tyrp1 gene has been shown to drive detectable transgene expression only to the RPE, even though the gene is also expressed in melanocytes as evident from Tyrp1-mutant mice. This indicates that the regulatory elements responsible for Tyrp1 gene expression in the RPE are not sufficient for expression in melanocytes. I thus searched for a putative melanocyte-specific regulatory sequence and demonstrate that a bacterial artificial chromosome (BAC) containing the Tyrp1 gene and surrounding sequences is able to target transgenic expression to melanocytes and to rescue the Tyrp1 b (brown) phenotype. This BAC contains several highly conserved non-coding sequences that might represent novel regulatory elements. I further focused on a sequence located at -15 kb which I identified as amelanocyte-specific enhancer as shown by cell culture and transgenic mice. In addition, further functional analysis identified the transcription factor Sox10 as being able to bind and transactivate this enhancer. As for Tyrp1, tyrosinase gene regulation is mediated by different cis-regulatory elements in melanocytes and RPE. It was shown that the tyrosinase promoter was not sufficient to confer strong and specific expression in melanocytes and RPE. Moreover, analysis of tyrosinase upstream sequence, revealed the presence of a specific enhancer at position -15 kb which was necessary to confer strong expression in melanocytes. This enhancer element however failed to act as an enhancer in the RPE, but rather repressed expression. This indicates that some regulatory elements required for tyrosinase expression in both RPE and melanocytes are still missing from these constructs. As for Tyrp1, I first demonstrated that a BAC containing the Tyr gene is able to rescue the Tyr c (albino) phenotype in mice, then I inserted a lacZ reporter gene in the BAC by homologous recombination, and finally analysed the pattern of lacZ expression in transgenic mice. These mice showed strong lacZ expression in both RPE and melanocytes, indicating that the BAC contains the regulatory sequences required for proper tyrosinase expression. In order to localize more precisely these regulatory elements, I have then generated several deletions in the BAC and analysed lacZ expression in transgenic mice. Multi-species comparative genomic analysis then allowed identifying conserved sequences that potentially represent novel regulatory elements. Using this experimental approach, I identified a region that behaves as a RPE-specific enhancer and that is required for tyrosinase expression in the retina] pigment epithelium. In addition, I identified the transcription factors Mitf and Sox l0 as being transactivators of the melanocyte-specific enhancer located at -l5 kb. The identification and characterization of these tyrosinase and Tyrp1 distal regulatory element supports the idea that separate regulatory sequences mediate differential gene expression in melanocytes and RPE.

Logistics Development in Finnish and Swedish Companies with Respect of Russia and Four Asian Countries: Traffic Flow and Warehousing Analysis from Current Situation and Likely Development Trends

On selvää, että tänä päivänä maailmankaupan painopiste on hiljalleen siirtymässä Aasiaan ja varsinkin Kiina on ollut huomion keskipisteessä. Erityisesti valmistavien yritysten perspektiivistä muutos on ollut merkittävä ja tämä tosiasia kasvattaa yrityksissä paineita luoda kustannustehokkaita toimitusketjuratkaisuja,joiden vasteaika on mahdollisimman lyhyt. Samaan aikaan kun tarkastellaan kuljetusvirtoja, huomattaan että maanosien välillä on suuri epätasapaino. Tämä on enimmäkseen seurausta suurten globaalisti toimivien yritysten toimitusketjustrategioista. Useimmat näistä toimijoista optimoivat verkostonsa turvautumalla 'paikalliseen hankintaan', jotta he voisivat paremmin hallita toimitusketjujaan ja saada näitä reagointiherkimmiksi. Valmistusyksiköillä onkin monesti Euroopassa pakko käyttää kalliita raaka-aineita ja puolivalmisteita. Kriittisiksi tekijöiksi osoittautuvat kuljetus- ja varastointikustannukset sekä näiden seurauksena hukka-aika, joka aiheutuu viivästyksistä. Voidakseen saavuttaa optimiratkaisun, on tehtävä päätös miten tuotteet varastoidaan: keskitetysti tai hajautetusti ja integroida tämä valinta sopivien kuljetusmuotojen kanssa. Aasiasta Pohjois-Eurooppaan on halpaa käyttää merikuljetusta, mutta operaatio kestää hyvin pitkään - joissain tapauksessa jopa kahdeksan viikkoa. Toisaalta lentokuljetus on sekä kallis että rajoittaa siirrettävien tuotteiden eräkokoa.On olemassa kolmaskin vaihtoehto, josta voisi olla ratkaisuksi: rautatiekuljetus on halvempi kuin lentokuljetus ja vasteajat ovat lyhyemmät kuin merikuljetuksissa. Tässä tutkimuksessa tilannetta selvitetään kyselyllä, joka suunnattiin Suomessa ja Ruotsissa toimiville yrityksille. Tuloksien perusteella teemme johtopäätökset siitä, mitkä kuljetusmuotojen markkinaosuudet tulevat olemaan tulevaisuudessa sekä luomme kuvan kuljetusvirroista Euroopan, Venäjän, Etelä-Korea, Intian, Kiinan ja Japanin välillä. Samalla on tarkoitus ennakoida sitä, miten tarkastelun kohteena olevat yritykset aikovat kehittää kuljetuksiaan ja varastointiaan tulevien vuosien aikana. Tulosten perusteella näyttää siltä, että seuraavan viiden vuoden kuluessa kuljetuskustannukset eivät merkittävissä määrin tule muuttuman ja meri- sekä kumipyöräkuljetukset pysyvät suosituimpina vaihtoehtoina.Kuitenkin lentokuljetusten osuus laskee hiukan, kun taas rautatiekuljetusten painotus kasvaa. Tulokset paljastavat, että Kiinassa ja Venäjällä kuljetettava konttimäärä kasvaa; Intiassa tulos on saman suuntainen, joskaan ei niin voimakas. Analyysimme mukaan kuljetusvirtoihin liittyvä epätasapaino säilyy Venäjän kuljetusten suhteen: yritykset jatkavat tulevaisuudessakin vientiperusteista strategiaansa. Varastoinnin puolella tunnistamme pienemmän muutoksen, jonka mukaan pienikokoisten varastojen määrät todennäköisesti vähenevät tulevaisuudessa ja kiinnostus isoja varastoja kohtaan lisääntyy. Tässä kohtaa on mainittava, että suomalaisilla yrityksillä on enemmän varastoja Keski- ja Itä-Euroopassa verrattuna ruotsalaisiin toimijoihin, jotka keskittyvät selkeämmin Länsi-Euroopan maihin. Varastoja yrityksillä on molemmissa tapaukissa paljolti kotimaassaan. Valitessaan varastojensa sijoituskohteita yritykset painottavat seuraavia kriteereitä: alhaiset jakelukustannukset, kokoamispaikan/valmistustehtaan läheisyys, saapuvan logistiikan integroitavuus ja saatavilla olevat logistiikkapalvelut. Tutkimuksemme lopussa päädymme siihen, että varastojen sijoituspaikat eivät muutu satamien rakenteen ja liikenneyhteyksien takia kovinkaan nopeasti.

Formation and Control of Trace Metal Emissions in Co-Firing of Biomass, Peat, and Wastes in Fluidised Bed Combustors

Environmentally harmful consequences of fossil fuel utilisation andthe landfilling of wastes have increased the interest among the energy producers to consider the use of alternative fuels like wood fuels and Refuse-Derived Fuels, RDFs. The fluidised bed technology that allows the flexible use of a variety of different fuels is commonly used at small- and medium-sized power plants ofmunicipalities and industry in Finland. Since there is only one mass-burn plantcurrently in operation in the country and no intention to build new ones, the co-firing of pre-processed wastes in fluidised bed boilers has become the most generally applied waste-to-energy concept in Finland. The recently validated EU Directive on Incineration of Wastes aims to mitigate environmentally harmful pollutants of waste incineration and co-incineration of wastes with conventional fuels. Apart from gaseous flue gas pollutants and dust, the emissions of toxic tracemetals are limited. The implementation of the Directive's restrictions in the Finnish legislation is assumed to limit the co-firing of waste fuels, due to the insufficient reduction of the regulated air pollutants in the existing flue gas cleaning devices. Trace metals emission formation and reduction in the ESP, the condensing wet scrubber, the fabric filter, and the humidification reactor were studied, experimentally, in full- and pilot-scale combustors utilising the bubbling fluidised bed technology, and, theoretically, by means of reactor model calculations. The core of the model is a thermodynamic equilibrium analysis. The experiments were carried out with wood chips, sawdust, and peat, and their refuse-derived fuel, RDF, blends. In all, ten different fuels or fuel blends were tested. Relatively high concentrations of trace metals in RDFs compared to the concentrations of these metals in wood fuels increased the trace metal concentrations in the flue gas after the boiler ten- to hundred-folds, when RDF was co-fired with sawdust in a full-scale BFB boiler. In the case of peat, lesser increase in trace metal concentrations was observed, due to the higher initial trace metal concentrations of peat compared to sawdust. Despite the high removal rate of most of the trace metals in the ESP, the Directive emission limits for trace metals were exceeded in each of the RDF co-firing tests. The dominat trace metals in fluegas after the ESP were Cu, Pb and Mn. In the condensing wet scrubber, the flue gas trace metal emissions were reduced below the Directive emission limits, whenRDF pellet was used as a co-firing fuel together with sawdust and peat. High chlorine content of the RDFs enhanced the mercuric chloride formation and hence the mercury removal in the ESP and scrubber. Mercury emissions were lower than theDirective emission limit for total Hg, 0.05 mg/Nm3, in all full-scale co-firingtests already in the flue gas after the ESP. The pilot-scale experiments with aBFB combustor equipped with a fabric filter revealed that the fabric filter alone is able to reduce the trace metal concentrations, including mercury, in the flue gas during the RDF co-firing approximately to the same level as they are during the wood chip firing. Lower trace metal emissions than the Directive limits were easily reached even with a 40% thermal share of RDF co-firing with sawdust.Enrichment of trace metals in the submicron fly ash particle fraction because of RDF co-firing was not observed in the test runs where sawdust was used as the main fuel. The combustion of RDF pellets with peat caused an enrichment of As, Cd, Co, Pb, Sb, and V in the submicron particle mode. Accumulation and release oftrace metals in the bed material was examined by means of a bed material analysis, mass balance calculations and a reactor model. Lead, zinc and copper were found to have a tendency to be accumulated in the bed material but also to have a tendency to be released from the bed material into the combustion gases, if the combustion conditions were changed. The concentration of the trace metal in the combustion gases of the bubbling fluidised bed boiler was found to be a summary of trace metal fluxes from three main sources. They were (1) the trace metal flux from the burning fuel particle (2) the trace metal flux from the ash in the bed, and (3) the trace metal flux from the active alkali metal layer on the sand (and ash) particles in the bed. The amount of chlorine in the system, the combustion temperature, the fuel ash composition and the saturation state of the bed material in regard to trace metals were discovered to be key factors affecting therelease process. During the co-firing of waste fuels with variable amounts of e.g. ash and chlorine, it is extremely important to consider the possible ongoingaccumulation and/or release of the trace metals in the bed, when determining the flue gas trace metal emissions. If the state of the combustion process in regard to trace metals accumulation and/or release in the bed material is not known,it may happen that emissions from the bed material rather than the combustion of the fuel in question are measured and reported.

Converter-flux-based current control of voltage source PWM rectifiers - analysis and implementation

Pulsewidth-modulated (PWM) rectifier technology is increasingly used in industrial applications like variable-speed motor drives, since it offers several desired features such as sinusoidal input currents, controllable power factor, bidirectional power flow and high quality DC output voltage. To achieve these features,however, an effective control system with fast and accurate current and DC voltage responses is required. From various control strategies proposed to meet these control objectives, in most cases the commonly known principle of the synchronous-frame current vector control along with some space-vector PWM scheme have been applied. Recently, however, new control approaches analogous to the well-established direct torque control (DTC) method for electrical machines have also emerged to implement a high-performance PWM rectifier. In this thesis the concepts of classical synchronous-frame current control and DTC-based PWM rectifier control are combined and a new converter-flux-based current control (CFCC) scheme is introduced. To achieve sufficient dynamic performance and to ensure a stable operation, the proposed control system is thoroughly analysed and simple rules for the controller design are suggested. Special attention is paid to the estimationof the converter flux, which is the key element of converter-flux-based control. Discrete-time implementation is also discussed. Line-voltage-sensorless reactive reactive power control methods for the L- and LCL-type line filters are presented. For the L-filter an open-loop control law for the d-axis current referenceis proposed. In the case of the LCL-filter the combined open-loop control and feedback control is proposed. The influence of the erroneous filter parameter estimates on the accuracy of the developed control schemes is also discussed. A newzero vector selection rule for suppressing the zero-sequence current in parallel-connected PWM rectifiers is proposed. With this method a truly standalone and independent control of the converter units is allowed and traditional transformer isolation and synchronised-control-based solutions are avoided. The implementation requires only one additional current sensor. The proposed schemes are evaluated by the simulations and laboratory experiments. A satisfactory performance and good agreement between the theory and practice are demonstrated.

On Modelling, System Identification and Control of Servo-Systems with a Flexible Load

The present study was done with two different servo-systems. In the first system, a servo-hydraulic system was identified and then controlled by a fuzzy gainscheduling controller. The second servo-system, an electro-magnetic linear motor in suppressing the mechanical vibration and position tracking of a reference model are studied by using a neural network and an adaptive backstepping controller respectively. Followings are some descriptions of research methods. Electro Hydraulic Servo Systems (EHSS) are commonly used in industry. These kinds of systems are nonlinearin nature and their dynamic equations have several unknown parameters.System identification is a prerequisite to analysis of a dynamic system. One of the most promising novel evolutionary algorithms is the Differential Evolution (DE) for solving global optimization problems. In the study, the DE algorithm is proposed for handling nonlinear constraint functionswith boundary limits of variables to find the best parameters of a servo-hydraulic system with flexible load. The DE guarantees fast speed convergence and accurate solutions regardless the initial conditions of parameters. The control of hydraulic servo-systems has been the focus ofintense research over the past decades. These kinds of systems are nonlinear in nature and generally difficult to control. Since changing system parameters using the same gains will cause overshoot or even loss of system stability. The highly non-linear behaviour of these devices makes them ideal subjects for applying different types of sophisticated controllers. The study is concerned with a second order model reference to positioning control of a flexible load servo-hydraulic system using fuzzy gainscheduling. In the present research, to compensate the lack of dampingin a hydraulic system, an acceleration feedback was used. To compare the results, a pcontroller with feed-forward acceleration and different gains in extension and retraction is used. The design procedure for the controller and experimental results are discussed. The results suggest that using the fuzzy gain-scheduling controller decrease the error of position reference tracking. The second part of research was done on a PermanentMagnet Linear Synchronous Motor (PMLSM). In this study, a recurrent neural network compensator for suppressing mechanical vibration in PMLSM with a flexible load is studied. The linear motor is controlled by a conventional PI velocity controller, and the vibration of the flexible mechanism is suppressed by using a hybrid recurrent neural network. The differential evolution strategy and Kalman filter method are used to avoid the local minimum problem, and estimate the states of system respectively. The proposed control method is firstly designed by using non-linear simulation model built in Matlab Simulink and then implemented in practical test rig. The proposed method works satisfactorily and suppresses the vibration successfully. In the last part of research, a nonlinear load control method is developed and implemented for a PMLSM with a flexible load. The purpose of the controller is to track a flexible load to the desired position reference as fast as possible and without awkward oscillation. The control method is based on an adaptive backstepping algorithm whose stability is ensured by the Lyapunov stability theorem. The states of the system needed in the controller are estimated by using the Kalman filter. The proposed controller is implemented and tested in a linear motor test drive and responses are presented.

Direct torque control of permanent magnet synchronous machines - analysis and implementation

Thedirect torque control (DTC) has become an accepted vector control method besidethe current vector control. The DTC was first applied to asynchronous machines,and has later been applied also to synchronous machines. This thesis analyses the application of the DTC to permanent magnet synchronous machines (PMSM). In order to take the full advantage of the DTC, the PMSM has to be properly dimensioned. Therefore the effect of the motor parameters is analysed taking the control principle into account. Based on the analysis, a parameter selection procedure is presented. The analysis and the selection procedure utilize nonlinear optimization methods. The key element of a direct torque controlled drive is the estimation of the stator flux linkage. Different estimation methods - a combination of current and voltage models and improved integration methods - are analysed. The effect of an incorrect measured rotor angle in the current model is analysed andan error detection and compensation method is presented. The dynamic performance of an earlier presented sensorless flux estimation method is made better by improving the dynamic performance of the low-pass filter used and by adapting the correction of the flux linkage to torque changes. A method for the estimation ofthe initial angle of the rotor is presented. The method is based on measuring the inductance of the machine in several directions and fitting the measurements into a model. The model is nonlinear with respect to the rotor angle and therefore a nonlinear least squares optimization method is needed in the procedure. A commonly used current vector control scheme is the minimum current control. In the DTC the stator flux linkage reference is usually kept constant. Achieving the minimum current requires the control of the reference. An on-line method to perform the minimization of the current by controlling the stator flux linkage reference is presented. Also, the control of the reference above the base speed is considered. A new estimation flux linkage is introduced for the estimation of the parameters of the machine model. In order to utilize the flux linkage estimates in off-line parameter estimation, the integration methods are improved. An adaptive correction is used in the same way as in the estimation of the controller stator flux linkage. The presented parameter estimation methods are then used in aself-commissioning scheme. The proposed methods are tested with a laboratory drive, which consists of a commercial inverter hardware with a modified software and several prototype PMSMs.

Oral pathogens in duwl's: risk of infection and strategies for their control

Water lines are an important source of potentíal contamination. Every dental unit is equipped with small-bore flexible plastic tubing to bring water to different hand pieces, such as the air/water syringe, the ultrasonic scaler or the high-speed hand piece. Most dental units are connected directly to municipal distribution systems for potable water and chlorinated or not, this water contains diverse...

Control of Guignardia citricarpa by Bacillus subtilis and Trichoderma spp.

The ability of isolates of Bacillus subtilis and Trichoderma spp. to control citrus black spot (CBS) was investigated in ´Natal´ sweet orange orchards. The first experiment was conducted during the 2001/2002 season and four isolates of B. subtilis (ACB-AP3, ACB-69, ACB-72 and ACB-77), applied every 28 days, alone or in combination were tested and compared with fungicide treatments. Two other experiments were carried out during the 2002/2003 season, where the same isolates of Bacillus and two isolates of Trichoderma (ACB-14 and ACB-40) were tested being applied every 28 days in the second experiment, and every 15 days in the third experiment. In the first experiment, the treatment with ACB-69 differed statistically from the control, but did not differ from other biological control agents or mixture of Bacillus isolates. In the second experiment, the treatments with ACB-69 and ACB-AP3 resulted in smaller disease index compared with the control treatment. However, this result was not repeated in the third experiment, where the isolates were applied every 15 days. Disease severity was high in both evaluated seasons and the fungicide treatment was the most effective for disease control.

CCL8 and the Immune Control of Cytomegalovirus in Organ Transplant Recipients.

Monitoring of cytomegalovirus cell-mediated immunity is a promising tool for the refinement of preventative and therapeutic strategies posttransplantation. Typically, the interferon-γ response to T cell stimulation is measured. We evaluated a broad range of cytokine and chemokines to better characterize the ex vivo host-response to CMV peptide stimulation. In a cohort of CMV viremic organ transplant recipients, chemokine expression-specifically CCL8 (AUC 0.849 95% CI 0.721-0.978; p = 0.003) and CXCL10 (AUC 0.841, 95% CI 0.707-0.974; p = 0.004)-was associated with control of viral replication. In a second cohort of transplant recipients at high-risk for CMV, the presence of a polymorphism in the CCL8 promoter conferred an increased risk of viral replication after discontinuation of antiviral prophylaxis (logrank hazard ratio 3.6; 95% CI 2.077-51.88). Using cell-sorting experiments, we determined that the primary cell type producing CCL8 in response to CMV peptide stimulation was the monocyte fraction. Finally, in vitro experiments using standard immunosuppressive agents demonstrated a dose-dependent reduction in CCL8 production. Chemokines appear to be important elements of the cell-mediated response to CMV infection posttransplant, as here suggested for CCL8, and translation of this knowledge may allow for the tailoring and improvement of preventative strategies.