GDH activity and ammonium excretion during growth in the marine mysid, "Leptomysis lingvura"

[EN] Ammonium (NH4+) and nitrate (NO3-) are the main constituents of the inorganic nitrogen pool that supports primary production in marine systems. NH4+ release via glutamate deamination in heterotrophic organisms represents the largest recycled nitrogen source in the euphotic zone, supporting around the 80 % of the primary producers requirements (Harrison, 1992). Glutamate dehydrogenase (GDH) is the enzyme that catalyzes this process. This fact has lead to the use of GDH activity as an index, a proxy, for physiological NH4+ formation. The result is a measure of potential excretion that avoids incubation artefacts due to manipulation of the organisms. The relationship between GDH activity and NH4+ excretion in cultures of the marine mysid Leptomysis lingvura is analyzed here. With interspecific and environmental interferences minimized, the study shows that the relationship between GDH activity and NH4+ excretion in L. lingvura is similar to equivalent results measured on mixed assemblages of zooplankton.

The impact of body size and starvation on the biochemistry and the physiology of ammonium excretion in the marine mysid, "Leptomysis lingvura"

[EN] Ammonium (NH4+) release by bacterial remineralization and heterotrophic grazers determines the regenerated fraction of phytoplankton productivity, so the measurement of NH4+ excretion in marine organisms is necessary to characterize both the magnitude and the efficiency of the nitrogen cycle. Glutamate dehydrogenase (GDH) is largely responsible for NH4+ formation in crustaceans and consequently should be useful in estimating NH4+ excretion by marine zooplankton.
Here, we address body size and starvation as sources of variability on the GDH to NH4+ excretion ratio (GDH/RNH4+). We found a strong correlation between the RNH4+ and the GDH activity (r2 = 0.87, n = 41) during growth. Since GDH activity maintained a linear relation (b = 0.93) and RNH4+ scaled exponentially (b =0.55) in well fed mysids, the GDH/RNH4+ ratio increased with size. However, the magnitude of its variation increased even more when adult mysids were starved. In this case, the GDH/RNH4+ ratio ranged from 11.23 to 102.41.

Understanding the zooplankton ammonium excretion: from biogeochemical implications to intracellular regulatory mechanisms

[EN] This thesis focuses on the zooplankton NH4+ regeneration that supports about the 80% of the phytoplankton requirements. In its more oceanographic facet, it elucidates the control that the mesozooplankton community exerts on the primary productivity in the northern Benguela, and models the N-fluxes from zooplankton NH4+ excretion. At the physiological level, it examines the relationship between the NH4+ excretion and its associated biochemistry. Assuming the substrate availability as the critical factor in regulating the velocity of NH4+ production, a bisubstrate model was developed to predict its actual rate in zooplankton. Overall, this research provides knowledge about the implications of zooplankton NH4+ excretion on the biogeochemical cycles, and introduces new insights into the study of this process from enzymatic measurements.

Understanding the zooplankton ammonium excretion : from biogeochemical implications to intracellular regulatory mechanisms

[EN]Zooplankton play a key role in marine ecosystems and their biogeochemical cycles. They exert control over the primary productivity through the consumption of organic matter and, at the same time, the release of nutrients that sustains the phytoplankton growth. This thesis focuses on the NH+ 4 excretion processes related to these heterotrophic organisms that support, at a global scale, about the 80% of the phytoplankton requirements. However, thereisno clear constant pattern in the zooplankton contribution to theNH+ 4 regeneration throughout thedifferent pelagic ecosystems, so continuousmonitoring of thismetabolic processisessential at widetemporal and spatial scales...

Molecular interactions: metal ions and protein chaperones in the urease system from Helicobacter pylori

Although nickel is a toxic metal for living organisms in its soluble form, its importance in many biological processes recently emerged. In this view, the investigation of the nickel-dependent enzymes urease and [NiFe]-hydrogenase, especially the mechanism of nickel insertion into their active sites, represent two intriguing case studies to understand other analogous systems and therefore to lead to a comprehension of the nickel trafficking inside the cell. Moreover, these two enzymes have been demonstrated to ensure survival and colonization of the human pathogen H. pylori, the only known microorganism able to proliferate in the gastric niche. The right nickel delivering into the urease active site requires the presence of at least four accessory proteins, UreD, UreE, UreF and UreG. Similarly, analogous process is principally mediated by HypA and HypB proteins in the [NiFe]-hydrogenase system. Indeed, HpHypA and HpHypB also have been proposed to act in the activation of the urease enzyme from H. pylori, probably mobilizing nickel ions from HpHypA to the HpUreE-HpUreG complex. A complete comprehension of the interaction mechanism between the accessory proteins and the crosstalk between urease and hydrogenase accessory systems requires the determination of the role of each protein chaperone that strictly depends on their structural and biochemical properties. The availability of HpUreE, HpUreG and HpHypA proteins in a pure form is a pre-requisite to perform all the subsequent protein characterizations, thus their purification was the first aim of this work. Subsequently, the structural and biochemical properties of HpUreE were investigated using multi-angle and quasi-elastic light scattering, as well as NMR and circular dichroism spectroscopy. The thermodynamic parameters of Ni2+ and Zn2+ binding to HpUreE were principally established using isothermal titration calorimetry and the importance of key histidine residues in the process of binding metal ions was studied using site-directed mutagenesis. The molecular details of the HpUreE-HpUreG and HpUreE-HpHypA protein-protein assemblies were also elucidated. The interaction between HpUreE and HpUreG was investigated using ITC and NMR spectroscopy, and the influence of Ni2+ and Zn2+ metal ions on the stabilization of this association was established using native gel electrophoresis, light scattering and thermal denaturation scanning followed by CD spectroscopy. Preliminary HpUreE-HpHypA interaction studies were conducted using ITC. Finally, the possible structural architectures of the two protein-protein assemblies were rationalized using homology modeling and docking computational approaches. All the obtained data were interpreted in order to achieve a more exhaustive picture of the urease activation process, and the correlation with the accessory system of the hydrogenase enzyme, considering the specific role and activity of the involved protein players. A possible function for Zn2+ in the chaperone network involved in Ni2+ trafficking and urease activation is also envisaged.

Kinetische Untersuchungen zur Synthese von Blockcopolymeren mit Methacrylatsegmenten durch neue anionische Polymerisationssysteme

Ein metallfreies Reaktionssystem mit Bis(triphenylphosphoranyliden)ammonium-Kationen als Gegenionen sowie das Additiv Lithium-2-methoxyethoxid wurden auf ihre Eignung zur anionischen Synthese von Blockcopolymeren mit (Meth)acrylatsegmenten bei moderaten Temperaturen im Strömungsrohr-Reaktor untersucht. Das metallfreie System ist zur lebenden Polymerisation von Methacrylaten in THF mit engen Molekulargewichtsverteilungen bei Reaktionszeiten < 1 s bis zu Temperaturen von 0 °C geeignet. In Gegenwart von Metallionen (Li+) findet eine Verlangsamung der Polymerisation unter Verlust der Reaktionskontrolle statt, Lithiumenolate verursachen nun breite, multimodale Molekulargewichtsverteilungen. Eine lebende Polymerisation von Acrylaten ist nicht möglich, massenspektroskopische Untersuchungen der Produkte weisen auf einen komplexen Reaktionsmechanismus mit Abbruch- und Übertragungsreaktionen hin. Die Synthese von Poly(styrol)-block-Poly(1,4-butadien)-block-Poly(methylmethacrylat)-Copolymeren in Toluol ist mit Lithium-2-methoxyethoxid als Additiv für die MMA-Polymerisation bei moderaten Mischtemperaturen (T < 0 °C) im Strömungsrohr-Reaktor möglich, die Effektivität des Wechselschritts von Polybutadien zu PMMA beträgt im Durchschnitt ca. 50 %. Untersuchungen verschiedener Reaktionsparameter, wie z.B. der Endfunktionalisierung des Polybutadiens mit 1,1-Diphenylethylen und der Temperatur während der Verkappung und der MMA-Polymerisation, geben keine eindeutigen Hinweise auf die Ursache dieses Phänomens. MALDI-TOF-Massenspektren des unreagierten Polybutadien Precursors zeigen die Anlagerung von 1-3 Molekülen Methylmethacrylat und keinen Abbruch durch Backbiting, was auf die Ausbildung stabiler Aggregate hindeutet.

Mode coupling for precise measurements of the electronic g-factor of hydrogen-like ions in Penning traps

The g-factor is a constant which connects the magnetic moment $vec{mu}$ of a charged particle, of charge q and mass m, with its angular momentum $vec{J}$. Thus, the magnetic moment can be writen $ vec{mu}_J=g_Jfrac{q}{2m}vec{J}$. The g-factor for a free particle of spin s=1/2 should take the value g=2. But due to quantum electro-dynamical effects it deviates from this value by a small amount, the so called g-factor anomaly $a_e$, which is of the order of $10^{-3}$ for the free electron. This deviation is even bigger if the electron is exposed to high electric fields. Therefore highly charged ions, where electric field strength gets values on the order of $10^{13}-10^{16}$V/cm at the position of the bound electron, are an interesting field of investigations to test QED-calculations. In previous experiments [H"aff00,Ver04] using a single hydrogen-like ion confined in a Penning trap an accuracy of few parts in $10^{-9}$ was obtained. In the present work a new method for precise measurement of magnetic the electronic g-factor of hydrogen-like ions is discussed. Due to the unavoidable magnetic field inhomogeneity in a Penning trap, a very important contribution to the systematic uncertainty in the previous measurements arose from the elevated energy of the ion required for the measurement of its motional frequencies. Then it was necessary to extrapolate the result to vanishing energies. In the new method the energy in the cyclotron degree of freedom is reduced to the minimum attainable energy. This method consist in measuring the reduced cyclotron frequency $nu_{+}$ indirectly by coupling the axial to the reduced cyclotron motion by irradiation of the radio frequency $nu_{coup}=nu_{+}-nu_{ax}+delta$ where $delta$ is, in principle, an unknown detuning that can be obtained from the knowledge of the coupling process. Then the only unknown parameter is the desired value of $nu_+$. As a test, a measurement with, for simplicity, artificially increased axial energy was performed yielding the result $g_{exp}=2.000~047~020~8(24)(44)$. This is in perfect agreement with both the theoretical result $g_{theo}=2.000~047~020~2(6)$ and the previous experimental result $g_{exp1}=2.000~047~025~4(15)(44).$ In the experimental results the second error-bar is due to the uncertainty in the accepted value for the electron's mass. Thus, with the new method a higher accuracy in the g-factor could lead by comparison to the theoretical value to an improved value of the electron's mass. [H"af00] H. H"affner et al., Phys. Rev. Lett. 85 (2000) 5308 [Ver04] J. Verd'u et al., Phys. Rev. Lett. 92 (2004) 093002-1

Untersuchungen zur rekombinanten Expression und Faltung pflanzlicher Tyrosinasen

In ihrer dualen Funktion als Monophenolhydroxylase (EC 1.14.18.1) und Diphenoloxidase (EC 1.10.3.1) ist die Tyrosinase das Schlüsselenzym der Melanogenese, der Synthese des Melanins, und übernimmt damit quer durch alle Organismenreiche Aufgaben von der Pigmentierung bis hin zu einer Beteiligung an der Immunantwort. Sie zählt, zusammen mit den Catecholoxidasen und Hämocyaninen, zu den Typ-3-Kupfer-Proteinen, die sich durch ein Aktives Zentrum auszeichnen, das in der Lage ist, Sauerstoff und phenolische Substrate reversibel zwischen zwei Kupfer-Ionen zu binden. Bisher konnte weder die Funktion der pflanzlichen Tyrosinase genau identifiziert, noch die Struktur eines solchen Enzyms aufgeklärt werden. Mit dem späteren Ziel, durch eine röntgenkristallographische Analyse die zugrunde liegende strukturelle Ursache der zusätzlichen Monophenolhydroxylase-Aktivität von Tyrosinasen gegenüber reinen Catecholoxidasen ermitteln zu können, wurde in dieser Arbeit ein bakterielles Expressionssystem entwickelt, das zur Herstellung einer rekombinanten Tyrosinase oder Polyphenoloxidase (PPO) aus Spinacia oleracea (Spinat) für die Kristallisation verwendet werden kann. Das rekombinante Protein wurde in Form von Inclusion Bodies isoliert, anhand einer Affinitätschromatographie aufgereinigt und in anschließende Rückfaltungsexperimente eingesetzt. In einer parallelen Versuchsreihe konnte Spinat, aufgrund seiner hohen Tyrosinaseaktivität, als geeignetes Objekt für die Isolation des nativen Enzyms identifiziert werden. Im Anschluss an eine Thylakoidpräparation, Solubilisierung der Thylakoidmembranen und Fällung des Proteins mit Ammoniumsulfat, wurden Experimente zur weiteren Anreicherung der Tyrosinase-Aktivität über eine Anionenaustausch-Chromatographie und zur Etablierung einiger nachfolgender Aufreinigungsschritte durchgeführt.

Grazing incidence pumped Zr x-ray laser for spectroscopy on Li-like ions

X-ray laser fluorescence spectroscopy of the 2s-2p transition in Li-like ions is promising to become a widely applicable tool to provide information on the nuclear charge radii of stable and radioactive isotopes. For performing such experiments at the Experimental Storage Ring ESR, and the future NESR within the FAIR Project, a grazing incidence pumped (GRIP) x-ray laser (XRL) was set up at GSI Darmstadt using PHELIX (Petawatt High Energy Laser for heavy Ions eXperiments). The experiments demonstrated that lasing using the GRIP geometry could be achieved with relatively low pump energy, a prerequisite for higher repetition rate. In the first chapter the need of a plasma XRL is motivated and a short history of the plasma XRL is presented. The distinctive characteristic of the GRIP method is the controlled deposition of the pump laser energy into the desired plasma density region. While up to now the analysis performed were mostly concerned with the plasma density at the turning point of the main pump pulse, in this thesis it is demonstrated that also the energy deposition is significantly modified for the GRIP method, being sensitive in different ways to a large number of parameters. In the second chapter, the theoretical description of the plasma evolution, active medium and XRL emission properties are reviewed. In addition an innovative analysis of the laser absorption in plasma which includes an inverse Bremsstrahlung (IB) correction factor is presented. The third chapter gives an overview of the experimental set-up and diagnostics, providing an analytical formula for the average and instantaneous traveling wave speed generated with a tilted, on-axis spherical mirror, the only focusing system used up to now in GRIP XRL. The fourth chapter describes the experimental optimization and results. The emphasis is on the effect of the incidence angle of the main pump pulse on the absorption in plasma and on output and gain in different lasing lines. This is compared to the theoretical results for two different incidence angles. Significant corrections for the temperature evolution during the main pump pulse due to the incidence angle are demonstrated in comparison to a simple analytical model which does not take into account the pumping geometry. A much better agreement is reached by the model developed in this thesis. An interesting result is also the appearance of a central dip in the spatially resolved keV emission which was observed in the XRL experiments for the first time and correlates well with previous near field imaging and plasma density profile measurements. In the conclusion also an outlook to the generation of shorter wavelength XRL’s is given.

Characterization and optimization of an x-ray laser for the spectroscopy of Li-like heavy-ions

Recent developments in the theory of plasma-based collisionally excited x-ray lasers (XRL) have shown an optimization potential based on the dependence of the absorption region of the pumping laser on its angle of incidence on the plasma. For the experimental proof of this idea, a number of diagnostic schemes were developed, tested, qualified and applied. A high-resolution imaging system, yielding the keV emission profile perpendicular to the target surface, provided positions of the hottest plasma regions, interesting for the benchmarking of plasma simulation codes. The implementation of a highly efficient spectrometer for the plasma emission made it possible to gain information about the abundance of the ionization states necessary for the laser action in the plasma. The intensity distribution and deflection angle of the pump laser beam could be imaged for single XRL shots, giving access to its refraction process within the plasma. During a European collaboration campaign at the Lund Laser Center, Sweden, the optimization of the pumping laser incidence angle resulted in a reduction of the required pumping energy for a Ni-like Mo XRL, which enabled the operation at a repetition rate of 10 Hz. Using the experiences gained there, the XRL performance at the PHELIX facility, GSI Darmstadt with respect to achievable repetition rate and at wavelengths below 20 nm was significantly improved, and also important information for the development towards multi-100 eV plasma XRLs was acquired. Due to the setup improvements achieved during the work for this thesis, the PHELIX XRL system now has reached a degree of reproducibility and versatility which is sufficient for demanding applications like the XRL spectroscopy of heavy ions. In addition, a European research campaign, aiming towards plasma XRLs approaching the water-window (wavelengths below 5 nm) was initiated.

Sulfur isotope analysis of aerosol particles by NanoSIMS

A new method to measure the sulfur isotopic composition of individual aerosol particles by NanoSIMS has been developed and tested on several standards such as barite (BaSO4), anhydrite (CaSO4), gypsum (CaSO4·2H2O), mascagnite ((NH4)2SO4), epsomite (MgSO4·7H2O), magnesium sulfate (MgSO4·xH2O), thenardite (Na2SO4), boetite (K2SO4) and cysteine (an amino acid). This ion microprobe technique employs a Cs+ primary ion beam and measures negative secondary ions permitting the analysis of sulfur isotope ratios in individual aerosol particles down to 500 nm in size (0.001-0.5 ng of sample material). The grain-to-grain reproducibility of measurements is typically 5‰ (1σ) for micron-sized grains, <5‰ for submicron-sized grains, and <2‰ for polished thin sections and ultra microtome sections which were studied for comparison. The role of chemical omposition (matrix effect) and sample preparation techniques on the instrumental mass fractionation (IMF) of the 34S/32S ratio in the NanoSIMS has been investigated. The IMF varies by ~15‰ between the standards studied here. A good correlation between IMF and ionic radius of the cations in sulfates was observed. This permits to infer IMF corrections even for sulfates for which no isotope standards are available. The new technique allows to identify different types of primary and secondary sulfates based on their chemical composition and to measure their isotopic signature separately. It was applied to marine aerosol samples collected in Mace Head and urban aerosol samples collected in Mainz. It was shown that primary sulfate particles such as sulfate in NaCl or gypsum particles precipitated from ocean water retain the original isotopic signature of their source. The isotopic composition of secondary sulfate depends on the isotopic composition of precursor SO2 and the oxidation pathway. The 34S/32S fractionation with respect to the precursor SO2 is -9‰ for homogeneous oxidation and +16.5‰ for heterogeneous oxidation. This large difference between the isotopic fractionation of both pathways allows identifying the oxidation pathway from which the SO42- in a secondary sulfate particle is derived, by means of its sulfur isotope ratio, provided that the isotopic signature of the precursor SO2 is known. The isotopic composition of the precursor SO2 of secondary sulfates was calculated based on the isotopic composition of particles with known oxidation pathway such as fine mode ammonium sulfate.

First principle study of ions in water and ionic liquids

Die beiden in dieser Arbeit betrachteten Systeme, wässrige Lösungen von Ionen und ionische Flüssigkeiten, zeigen vielfältige Eigenschaften und Anwendungsmöglichkeiten, im Gegensatz zu anderen Systemen. Man findet sie beinahe überall im normalen Leben (Wasser), oder ihre Bedeutung wächst (ioinische Flüssigkeiten). Der elektronische Anteil und der atomare Anteil wurden getrennt voneinander untersucht und im Zusammenhang analysiert. Mittels dieser Methode konnten die in dem jeweiligen System auftretenden Mechanismen genauer untersucht werden. Diese Methode wird "Multiscale Modeling" genannt, dabei werden die Untereinheiten eines Systems genauer betrachtet, wie in diesem Fall die elektronischen and atomaren Teilsystem. Die Ergebnisse, die aus den jeweiligen Betrachtungen hervorgehen, zeigen, dass, im Falle von hydratisierten Ionen die Wasser-Wasser Wechselwirkungen wesentlich stärker sind als die elektrostatischen Wechselwirkung zwischen Wasser und dem Ion. Anhand der Ergebnisse ergibt sich, dass normale nicht-polarisierbare Modelle ausreichen, um Ionen-Wasser Lösungen zu beschreiben. Im Falle der ionischen Flüssigkeiten betrachten wir die elektronische Ebene mittels sehr genauer post-Hartree-Fock Methoden und DFT, deren Ergebnisse dann mit denen auf molekularer Ebene (mithilfe von CPMD/klassischer MD) in Beziehung gesetzt werden. Die bisherigen Ergebnisse zeigen, dass die Wasserstoff-Brückenbindungen im Fall der ionischen Flüssigkeiten nicht vernachässigt werden können. Weiterhin hat diese Studie herausgefunden, dass die klassischen Kraftfelder die Elektrostatik (Dipol- und Quadrupolmomente) nicht genau genug beschreibt. Die Kombination des mikroskopischen Mechanismus und der molekularen Eigenschaften ist besonders sinnvoll um verschiedene Anhaltspunkte von Simualtionen (z.B. mit klassische Molekular-Dynamik) oder Experimenten zu liefern oder solche zu erklären.

Towards a new test of time dilation: Laser spectroscopy on lithium ions stored at a velocity of 33.8 % of the speed of light

The subject of the presented thesis is the accurate measurement of time dilation, aiming at a quantitative test of special relativity. By means of laser spectroscopy, the relativistic Doppler shifts of a clock transition in the metastable triplet spectrum of ^7Li^+ are simultaneously measured with and against the direction of motion of the ions. By employing saturation or optical double resonance spectroscopy, the Doppler broadening as caused by the ions' velocity distribution is eliminated. From these shifts both time dilation as well as the ion velocity can be extracted with high accuracy allowing for a test of the predictions of special relativity. A diode laser and a frequency-doubled titanium sapphire laser were set up for antiparallel and parallel excitation of the ions, respectively. To achieve a robust control of the laser frequencies required for the beam times, a redundant system of frequency standards consisting of a rubidium spectrometer, an iodine spectrometer, and a frequency comb was developed. At the experimental section of the ESR, an automated laser beam guiding system for exact control of polarisation, beam profile, and overlap with the ion beam, as well as a fluorescence detection system were built up. During the first experiments, the production, acceleration and lifetime of the metastable ions at the GSI heavy ion facility were investigated for the first time. The characterisation of the ion beam allowed for the first time to measure its velocity directly via the Doppler effect, which resulted in a new improved calibration of the electron cooler. In the following step the first sub-Doppler spectroscopy signals from an ion beam at 33.8 %c could be recorded. The unprecedented accuracy in such experiments allowed to derive a new upper bound for possible higher-order deviations from special relativity. Moreover future measurements with the experimental setup developed in this thesis have the potential to improve the sensitivity to low-order deviations by at least one order of magnitude compared to previous experiments; and will thus lead to a further contribution to the test of the standard model.