The taxonomy, zoogeography and ecology of amphibians and reptiles of Hin Nam No National Protected Area (Laos) in comparison with data from Phong Nha – Ke Bang National Park (Vietnam).

In this thesis the mostly unknown herpetofauna in Hin Nam No National Protected Area Laos in the northern Truong Son Range was for the first time intensively investigated, and its diversity was compared to the bordering, and well-investigated Phong Nha - Ke Bang National Park in Vietnam. Twelve new vertebrate species were described comprising 11 geckonids (Cyrtodactylus bansocensis, C. calamei, C. hinnamnoensis, C. jaegeri, C. rufford, C. sommerladi, C. soudthichaki, Gekko boehmei, G. bonkowskii, G. sengchanthavongi, G. thakhekensis, Lycodon banksi and one colubrid snake (Lycodon banksi). Seven species were discovered for the first time in Laos including three frogs (Gracixalus quyeti, G. supercornutus, Rhacophorus maximus), two geckos (Cyrtodactylus cryptus, C. pseudoquadrivirgatus) and two snakes (Lycodon futsingensis, L. ruhstrati abditus). The main hypothesis that the Truong Son Range acted as a biogeographic barrier for the distribution of amphibians and reptiles could be confirmed at least for karst adapted gekkonids. Compared to other herpetofaunal groups the number of gekkonids in karst formations was particularly high (seven bent-toed geckos, four true geckos). By comparing the relative amounts of shared species in Hin Nam No and Phong Nha - Ke Bang, it is interesting to note that fewer reptile species (38%) than amphibian species (66%) were shared between both regions. This might indicate that the Truong Son Range acts as a stronger biogeographical barrier for reptiles than for amphibians. Two pairs of karst-adapted cryptic gecko species (i.e. species with distinct genetic differences, but a similar phenotype) occurred on both sides of the Truong Son Range. Only in one case these were sibling species (Crytodactylus sommerladi in Laos versus C. roesleri in Vietnam), but not in the other (C. hinnamnoensis in Laos versus C. phongnhakebangensis in Vietnam). On the Laotian side, nine gecko species (Cyrtodactylus bansocensis, C. calamei, C. darevskii, C. hinnamnoensis, C. khammouanensis, C. multiporus, C. sommerladi, G. boehmei, G. sengchanthavongi) currently have to be regarded as endemic to the Hin Nam No region. On the Vietnamese side, seven species including two bent-toed geckos (Cyrtodactylus phongnhakebangensis and C. roesleri), three skinks (Lygosoma boehmei, Sphenomorphus tetradactylus and Tropidophorus noggei), and two snakes (Hebius andreae and Boiga bourreti) are currently only known from Phong Nha - Ke Bang and adjacent regions. These high numbers of potential endemic species together with the cryptic species complex in Cyrtodactylus provide strong evidence that the karst formations in the northern Truong Son Range represent a hot spot of reptile diversity and of speciation in Crytodactylus in particular. Correct species identification is a fundamental requirement for conservation measures. The discovery of cryptic species complexes poses a challenge for alpha taxonomy and species conservation, because the true distribution ranges of the species are in fact much smaller than previously assumed. Species conservation in this area of Laos is facing a number of further problems. New and potentially endemic species were discovered in highly populated and disturbed areas. Conversion of the Ho Chi Minh Trail into a highway provided easy access for farmers and still continues to accelerate the destruction of remote forest areas. Southern Hin Nam No with its high diversity of endemic species was identified as the first priority area for conservation. Also Ban Soc, an area isolated from Hin Nam No, should be among the conservation priorities because this region houses a so far overlooked population of the critically endangered Siamese crocodile. Efforts to establish a legal conservation status for this habitat are in progress.

Continuité des traits psychopathiques et contribution de la qualité des relations parents-enfant, enseignant-enfant et pairs-enfant à la modification de ces traits chez des enfants présentant un trouble des conduites

Ce mémoire de recherche investigue la continuité des traits psychopathiques chez les enfants de même que la contribution de la qualité des relations avec les parents, l’enseignant et les pairs à la variabilité de ces traits. La présente étude porte sur 281 enfants (48 % de filles) âgés de 6 à 9 ans avec un trouble des conduites. Trois dimensions de traits psychopathiques ont été évaluées chez les enfants (narcissisme, impulsivité, insensibilité), en plus d’un construit global. Ces traits ont été mesurés avec l’APSD par un parent et un enseignant à l’entrée dans l’étude (temps 0 ou T0) puis à une année d’intervalle sur une période de 4 ans (T1 à T4). Ces évaluateurs ont également évalué la qualité de leur relation avec l’enfant ainsi que celle avec les pairs (T0). Les résultats montrent que la stabilité différentielle des traits sur l’intervalle de quatre années va de faible à modérée pour chaque dimension. Cependant, l’analyse de la stabilité des niveaux moyens indique que c’est entre le T0 et le T2 que la variabilité des traits est la plus significative, la stabilité étant plus importante entre le T2 et le T4. Enfin, l’étude démontre qu’aucune des variables relationnelles ne contribue significativement à la variabilité des traits quatre ans plus tard et ce, pour chacune des dimensions ainsi que pour le construit global. stabilité, traits psychopathiques, traits antisociaux, trouble des conduites, enfants, relation avec le parent, relation avec l’enseignant, relation avec les pairs

Search for same-sign top quark pairs with the ATLAS detector at the LHC

In this thesis, a search for same-sign top quark pairs produced according to the Standard Model Effective Field Theory (SMEFT) is presented. The analysis is carried out within the ATLAS Collaboration using collision data at a center-of-mass energy of $\sqrt{s} = 13$ TeV, collected by the ATLAS detector during the Run 2 of the Large Hadron Collider, corresponding to an integrated luminosity of $140$ fb$^{-1}$. Three SMEFT operators are considered in the analysis, namely $\mathcal{O}_{RR}$, $\mathcal{O}_{LR}^{(1)}$, and $\mathcal{O}_{LR}^{(8)}$. The signal associated to same-sign top pairs is searched in the dilepton channel, with the top quarks decaying via $t \longrightarrow W^+ b \longrightarrow \ell^+ \nu b$, leading to a final state signature composed of a pair of high-transverse momentum same-sign leptons and $b$-jets. Deep Neural Networks are employed in the analysis to enhance sensitivity to the different SMEFT operators and to perform signal-background discrimination. This is the first result of the ATLAS Collaboration concerning the search for same-sign top quark pairs production in proton-proton collision data at $\sqrt{s} = 13$ TeV, in the framework of the SMEFT.

An approach to document classification using verb-object pairs

The aim of this thesis is to present a new approach to document classification using verb-object pairs. We explore one possible strategy that uses the presence of relevant verb-object pairs in documents as features and a Naive Bayes classifier as a classifier on which the model is trained. Then, we assess the results from the case study which uses a software based on the strategy and make conclusions.

Development And Characterization Of 32 Microsatellite Loci In Genipa Americana (rubiaceae).

• Microsatellite primers were developed for the tree species Genipa americana (Rubiaceae) for further population genetic studies. • We identified 144 clones containing 65 repeat motifs from a genomic library enriched for (CT)8 and (GT)8 motifs. Primer pairs were developed for 32 microsatellite loci and validated in 40 individuals of two natural G. americana populations. Seventeen loci were polymorphic, revealing from three to seven alleles per locus. The observed and expected heterozygosities ranged from 0.24 to 1.00 and from 0.22 to 0.78, respectively. • The 17 primers identified as polymorphic loci are suitable to study the genetic diversity and structure, mating system, and gene flow in G. americana.

Microsatellite Markers For Urochloa Humidicola (poaceae) And Their Transferability To Other Urochloa Species.

Urochloa humidicola is a warm-season grass commonly used as forage in the tropics and is recognized for its tolerance to seasonal flooding. This grass is an important forage species for the Cerrado and Amazon regions of Brazil. U. humidicola is a polyploid species with variable ploidy (6X-9X) and facultative apomixis with high phenotypic plasticity. However, this apomixis and ploidy, as well as the limited knowledge of the genetic basis of the germplasm collection, have constrained genetic breeding activities, yet microsatellite markers may enable a better understanding of the species' genetic composition. This study aimed to develop and characterize new polymorphic microsatellite molecular markers in U. humidicola and to evaluate their transferability to other Urochloa species. A set of microsatellite markers for U. humidicola was identified from two new enriched genomic DNA libraries: the first library was constructed from a single sexual genotype and the second from a pool of eight apomictic genotypes selected on the basis of previous results. Of the 114 loci developed, 72 primer pairs presented a good amplification product, and 64 were polymorphic among the 34 genotypes tested. The number of bands per simple sequence repeat (SSR) locus ranged from 1 to 29, with a mean of 9.6 bands per locus. The mean polymorphism information content (PIC) of all loci was 0.77, and the mean discrimination power (DP) was 0.87. STRUCTURE analysis revealed differences among U. humidicola accessions, hybrids, and other Urochloa accessions. The transferability of these microsatellites was evaluated in four species of the genus, U. brizantha, U. decumbens, U. ruziziensis, and U. dictyoneura, and the percentage of transferability ranged from 58.33% to 69.44% depending on the species. This work reports new polymorphic microsatellite markers for U. humidicola that can be used for breeding programs of this and other Urochloa species, including genetic linkage mapping, quantitative trait loci identification, and marker-assisted selection.

Transtorno do déficit de atenção e hiperatividade: proposta de avaliação neuropsicológica para diagnóstico

Attention deficit hyperactivity disorder (ADHD) is characterized by a persistent pattern of inattention and/or hyperactivity/impulsivity. The aim of this research was to contribute more precisely to the diagnosis of ADHD, to propose a battery of neuropsychological assessment and to analyze the contribution of each test. We studied 10 matched pairs of children with ADHD and normal controls (7 to 11 years). Inclusion criteria were: presence of ADHD typical behavior, positive diagnosis of ADHD based on DSM-IV, normal IQ, normal neurological examination and parental consent. We used extensive neuropsychological battery. The results showed differential sensitivity for detection of attentional problems in children with ADHD, although most tests did not reach statistical significance. The item, errors, of WCST revealed statistically significant difference between the two groups: ADHD performance was inferior to controls . In conclusion the neuropsychological assessment battery used in this research contributed to the diagnosis of ADHD.

Avaliação do desempenho anaeróbio de atletas de rugby em cadeira de rodas = : Anaerobic performance evaluation of wheelchair rugby athletes

Universidade Estadual de Campinas . Faculdade de Educação Física

Adaptações da geometria da coluna vertebral e do dorso durante a corrida

Universidade Estadual de Campinas . Faculdade de Educação Física

Comparasion of two minimally invasive methods on the longevity of glass ionomer cement restorations: short-term results of a pilot study

The purpose of this study was to evaluate the clinical performance of glass ionomer cement (GIC) restorations comparing two minimally invasive methods in permanent teeth after 12 months. Fifty pregnant women (second trimester of pregnancy), mean age 22 ± 5.30 years, were treated by two previously trained operators. The treatment approaches tested were: chemomechanical method (CarisolvTM; MediTeam) and atraumatic restorative treatment (ART). A split-mouth study design was used in which the two treatments were randomly placed in 50 matched pairs of permanent teeth. The chemomechanical method (CM) was the test group and the ART was the control group. The treatments were performed in Public Health Centers. The tested restorative material was a high-strength GIC (Ketac Molar; 3M/ESPE). The restorations were placed according to the ART guidelines. Two calibrated independent examiners evaluated the restorations in accordance with ART criteria. The inter-examiner kappa was 0.97. Data were analyzed using 95% confidence interval on the binomial distribution and Fisher's exact test at 5% significance level. In a 12-month follow-up, 86% of the restorations were evaluated. In the test group (CM), 100% (CI=93.3-100%) of the restorations were considered successful. In the control group (ART) 97.6% (CI=87.4-99.9%) of the restorations were considered successful and 2.4% unsuccessful (marginal defect >0.5 mm). There was no statistically significant difference between the 12-mounth success rate for both groups (Fisher's exact test: P=0.49) and between the two operators (Fisher's exact test: P=1.00). Both minimally invasive methods, chemomechanical method and ART, showed a similar clinical performance after 12 months of follow up.

Comparative study of dental arch width in plaster models, photocopies and digitized images

The aim of this study was to comparatively assess dental arch width, in the canine and molar regions, by means of direct measurements from plaster models, photocopies and digitized images of the models. The sample consisted of 130 pairs of plaster models, photocopies and digitized images of the models of white patients (n = 65), both genders, with Class I and Class II Division 1 malocclusions, treated by standard Edgewise mechanics and extraction of the four first premolars. Maxillary and mandibular intercanine and intermolar widths were measured by a calibrated examiner, prior to and after orthodontic treatment, using the three modes of reproduction of the dental arches. Dispersion of the data relative to pre- and posttreatment intra-arch linear measurements (mm) was represented as box plots. The three measuring methods were compared by one-way ANOVA for repeated measurements (α = 0.05). Initial / final mean values varied as follows: 33.94 to 34.29 mm / 34.49 to 34.66 mm (maxillary intercanine width); 26.23 to 26.26 mm / 26.77 to 26.84 mm (mandibular intercanine width); 49.55 to 49.66 mm / 47.28 to 47.45 mm (maxillary intermolar width) and 43.28 to 43.41 mm / 40.29 to 40.46 mm (mandibular intermolar width). There were no statistically significant differences between mean dental arch widths estimated by the three studied methods, prior to and after orthodontic treatment. It may be concluded that photocopies and digitized images of the plaster models provided reliable reproductions of the dental arches for obtaining transversal intra-arch measurements.

Digital subtraction radiographic analysis of the combination of bioabsorbable membrane and bovine morphogenetic protein pool in human periodontal infrabony defects

OBJECTIVES: This study assessed the bone density gain and its relationship with the periodontal clinical parameters in a case series of a regenerative therapy procedure. MATERIAL AND METHODS: Using a split-mouth study design, 10 pairs of infrabony defects from 15 patients were treated with a pool of bovine bone morphogenetic proteins associated with collagen membrane (test sites) or collagen membrane only (control sites). The periodontal healing was clinically and radiographically monitored for six months. Standardized pre-surgical and 6-month postoperative radiographs were digitized for digital subtraction analysis, which showed relative bone density gain in both groups of 0.034 ± 0.423 and 0.105 ± 0.423 in the test and control group, respectively (p>0.05). RESULTS: As regards the area size of bone density change, the influence of the therapy was detected in 2.5 mm² in the test group and 2 mm² in the control group (p>0.05). Additionally, no correlation was observed between the favorable clinical results and the bone density gain measured by digital subtraction radiography (p>0.05). CONCLUSIONS: The findings of this study suggest that the clinical benefit of the regenerative therapy observed did not come with significant bone density gains. Long-term evaluation may lead to a different conclusions.

Comparison among four commonly used demineralizing agents for root conditioning: a scanning electron microscopy

Dental roots that have been exposed to the oral cavity and periodontal pocket environment present superficial changes, which can prevent connective tissue reattachment. Demineralizing agents have been used as an adjunct to the periodontal treatment aiming at restoring the biocompatibility of roots. OBJECTIVE: This study compared four commonly used demineralizing agents for their capacity of removing smear layer and opening dentin tubules. METHODS: Fifty fragments of human dental roots previously exposed to periodontal disease were scaled and randomly divided into the following groups of treatment: 1) CA: demineralization with citric acid for 3 min; 2) TC-HCl: demineralization with tetracycline-HCl for 3 min; 3) EDTA: demineralization with EDTA for 3 min; 4) PA: demineralization with 37% phosphoric acid for 3 min; 5) Control: rubbing of saline solution for 3 min. Scanning electron microscopy was used to check for the presence of residual smear layer and for measuring the number and area of exposed dentin tubules. RESULTS: Smear layer was present in 100% of the specimens from the groups PA and control; in 80% from EDTA group; in 33.3% from TC-HCl group and 0% from CA group. The mean numbers of exposed dentin tubules in a standardized area were: TC-HCl=43.8±25.2; CA=39.3±37; PA=12.1±16.3; EDTA=4.4±7.5 and Control=2.3±5.7. The comparison showed significant differences between the following pairs of groups: TC-HCl and Control; TC-HCl and EDTA; CA and Control; and CA and EDTA. The mean percentages of area occupied by exposed dentin tubules were: CA=0.12±0.17%; TC-HCl=0.08±0.06%; PA=0.03±0.05%; EDTA=0.01±0.01% and Control=0±0%. The CA group differed significantly from the others except for the TC-HCl group. CONCLUSION: There was a decreasing ability for smear layer removal and dentin tubule widening as follows: AC>TC-HCl>PA>EDTA. This information can be of value as an extra parameter for choosing one of them for root conditioning.

Correlation between metal-ceramic bond strength and coefficient of linear thermal expansion difference

The purpose of this study was to evaluate the metal-ceramic bond strength (MCBS) of 6 metal-ceramic pairs (2 Ni-Cr alloys and 1 Pd-Ag alloy with 2 dental ceramics) and correlate the MCBS values with the differences between the coefficients of linear thermal expansion (CTEs) of the metals and ceramics. Verabond (VB) Ni-Cr-Be alloy, Verabond II (VB2), Ni-Cr alloy, Pors-on 4 (P), Pd-Ag alloy, and IPS (I) and Duceram (D) ceramics were used for the MCBS test and dilatometric test. Forty-eight ceramic rings were built around metallic rods (3.0 mm in diameter and 70.0 mm in length) made from the evaluated alloys. The rods were subsequently embedded in gypsum cast in order to perform a tensile load test, which enabled calculating the CMBS. Five specimens (2.0 mm in diameter and 12.0 mm in length) of each material were made for the dilatometric test. The chromel-alumel thermocouple required for the test was welded into the metal test specimens and inserted into the ceramics. ANOVA and Tukey's test revealed significant differences (p=0.01) for the MCBS test results (MPa), with PI showing higher MCBS (67.72) than the other pairs, which did not present any significant differences. The CTE (10-6 oC-1) differences were: VBI (0.54), VBD (1.33), VB2I (-0.14), VB2D (0.63), PI (1.84) and PD (2.62). Pearson's correlation test (r=0.17) was performed to evaluate of correlation between MCBS and CTE differences. Within the limitations of this study and based on the obtained results, there was no correlation between MCBS and CTE differences for the evaluated metal-ceramic pairs.

Polymerization shrinkage stress of composites photoactivated by different light sources

The purpose of this study was to compare the polymerization shrinkage stress of composite resins (microfilled, microhybrid and hybrid) photoactivated by quartz-tungsten halogen light (QTH) and light-emitting diode (LED). Glass rods (5.0 mm x 5.0 cm) were fabricated and had one of the surfaces air-abraded with aluminum oxide and coated with a layer of an adhesive system, which was photoactivated with the QTH unit. The glass rods were vertically assembled, in pairs, to a universal testing machine and the composites were applied to the lower rod. The upper rod was placed closer, at 2 mm, and an extensometer was attached to the rods. The 20 composites were polymerized by either QTH (n=10) or LED (n=10) curing units. Polymerization was carried out using 2 devices positioned in opposite sides, which were simultaneously activated for 40 s. Shrinkage stress was analyzed twice: shortly after polymerization (t40s) and 10 min later (t10min). Data were analyzed statistically by 2-way ANOVA and Tukey's test (a=5%). The shrinkage stress for all composites was higher at t10min than at t40s, regardless of the activation source. Microfilled composite resins showed lower shrinkage stress values compared to the other composite resins. For the hybrid and microhybrid composite resins, the light source had no influence on the shrinkage stress, except for microfilled composite at t10min. It may be concluded that the composition of composite resins is the factor with the strongest influence on shrinkage stress.