An embedded cohesive crack model for finite element analysis of quasi-brittle materials

This paper presents a numerical implementation of the cohesive crack model for the anal-ysis of quasibrittle materials based on the strong discontinuity approach in the framework of the finite element method. A simple central force model is used for the stress versus crack opening curve. The additional degrees of freedom defining the crack opening are determined at the crack level, thus avoiding the need for performing a static condensation at the element level. The need for a tracking algorithm is avoided by using a consistent pro-cedure for the selection of the separated nodes. Such a model is then implemented into a commercial program by means of a user subroutine, consequently being contrasted with the experimental results. The model takes into account the anisotropy of the material. Numerical simulations of well-known experiments are presented to show the ability of the proposed model to simulate the fracture of quasibrittle materials such as mortar, concrete and masonry.

Electrochemical potentials (Quasi-Fermi Levels) and the operation of hot-carrier, impact-ionization, and intermediate-band solar cells

In the framework of the so-called third generation solar cells, three main concepts have been proposed in order to exceed the limiting efficiency of single-gap solar cells: the hot-carrier solar cell, the impact-ionization or multiple-exciton-generation solar cell, and the intermediate-band solar cell. At first sight, the three concepts are different, but in this paper, we illustrate how all these concepts, including the single-gap solar cell, share a common trunk that we call "core photovoltaic material." We demonstrate that each one of these next-generation concepts differentiates in fact from this trunk depending on the hypotheses that are made about the physical principles governing the electron electrochemical potentials. In the process, we also clarify the differences between electron, phonon, and photon chemical potentials (the three fundamental particles involved in the operation of the solar cell). The in-depth discussion of the physics involved about the operation of these cells also provides new insights about the operation of these cells.

From arrays of THz antennas to large-area emitters

Arrays of coherently driven photomixers with antenna (antenna emitter arrays, AEAs) have been evaluated as a possibility to overcome the power limitations of individual conventional photomixers with antenna (?antenna emitters?, AEs) for the generation of continuous-wave (CW) THz radiation. In this paper, ?large area emitters? (LAEs) are proposed as an alternative approach, and compared with AEAs. In this antenna-free new scheme of photomixing, the THz radiation originates directly from the acceleration of photo-induced charge carriers generated within a large semiconductor area. The quasi-continuous distribution of emitting elements corresponds to a high-density array and results in favorable radiation profiles without side lobes. Moreover, the achievable THz power is expected to outnumber even large AEAs. Last not least, the technological challenge of fabricating LAEs appears to be significantly less demanding.

On ergodic least-squares estimators of the generalized diffusion coefficient for fractional Brownian motion

We analyse a class of estimators of the generalized diffusion coefficient for fractional Brownian motion Bt of known Hurst index H, based on weighted functionals of the single time square displacement. We show that for a certain choice of the weight function these functionals possess an ergodic property and thus provide the true, ensemble-averaged, generalized diffusion coefficient to any necessary precision from a single trajectory data, but at expense of a progressively higher experimental resolution. Convergence is fastest around H ? 0.30, a value in the subdiffusive regime.

Quasi-isometries and isoperimetric inequalities

We consider the stability of isoperimetric inequalities under quasi-isometries between Riemann surfaces. Kanai observed that quasi-isometries preserve isoperimetric inequalities on complete Riemannian manifolds with finite geometry: positive injectivity radius and Ricci curvature bounded from below (see [2]). In [1], it is shown that the linear isoperimetric inequality is a quasi-isometric invariant for planar Riemann surfaces (genus zero surfaces) with vanishing injectivity radius. Moreover, it is proved that non-linear isoperimetric inequalities can only hold for Riemann surfaces with positive injectivity radius, and hence, by Kanai's observation, preserved by quasi-isometries. In this talk we present an overview on isoperimetric inequalities and give some of the ideas of the proofs of the results cited above.

On the layout of a least weight single span structure with uniform load. Some comments and improvements

Beghini et al (Struct Multidisc Optim doi:10.1007/s00158-013-1030-6, 2013) have published a very interesting paper arriving to practically the same nearly optimal solutions for the so named “bridge prob- lem” that the Writers published a year before, but using an alternative and remarkable approach to the problem. In spite of this general agreement, the Writers think that some details of the paper can be improved and there are results that can be given a clear and mean- ingful interpretation thanks to an old and practically unknown theorem on optimal slenderness.

Quasi-cylindrical approximation to the swirling flow in an atomizer chamber

A quasi-cylindrical approximation is used to analyse the axisymmetric swirling flow of a liquid with a hollow air core in the chamber of a pressure swirl atomizer. The liquid is injected into the chamber with an azimuthal velocity component through a number of slots at the periphery of one end of the chamber, and flows out as an anular sheet through a central orifice at the other end, following a conical convergence of the chamber wall. An effective inlet condition is used to model the effects of the slots and the boundary layer that develops at the nearby endwall of the chamber. An analysis is presented of the structure of the liquid sheet at the end of the exit orifice, where the flow becomes critical in the sense that upstream propagation of long-wave perturbations ceases to be possible. This nalysis leads to a boundary condition at the end of the orifice that is an extension of the condition of maximum flux used with irrotational models of the flow. As is well known, the radial pressure gradient induced by the swirling flow in the bulk of the chamber causes the overpressure that drives the liquid towards the exit orifice, and also leads to Ekman pumping in the boundary layers of reduced azimuthal velocity at the convergent wall of the chamber and at the wall opposite to the exit orifice. The numerical results confirm the important role played by the boundary layers. They make the thickness of the liquid sheet at the end of the orifice larger than predicted by rrotational models, and at the same time tend to decrease the overpressure required to pass a given flow rate through the chamber, because the large axial velocity in the boundary layers takes care of part of the flow rate. The thickness of the boundary layers increases when the atomizer constant (the inverse of a swirl number, proportional to the flow rate scaled with the radius of the exit orifice and the circulation around the air core) decreases. A minimum value of this parameter is found below which the layer of reduced azimuthal velocity around the air core prevents the pressure from increasing and steadily driving the flow through the exit orifice. The effects of other parameters not accounted for by irrotational models are also analysed in terms of their influence on the boundary layers.

An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy

A numerical and experimental study of ballistic impacts at various temperatures on precipitation hardened Inconel 718 nickel-base superalloy plates has been performed. A coupled elastoplastic-damage constitutive model with Lode angle dependent failure criterion has been implemented in LS-DYNA non-linear finite element code to model the mechanical behaviour of such an alloy. The ballistic impact tests have been carried out at three temperatures: room temperature (25 °C), 400 °C and 700 °C. The numerical study showed that the mesh size is crucial to predict correctly the shear bands detected in the tested plates. Moreover, the mesh size convergence has been achieved for element sizes on the same order that the shear bands. The residual velocity as well as the ballistic limit prediction has been considered excellent for high temperature ballistic tests. Nevertheless, the model has been less accurate for the numerical simulations performed at room temperature, being though in reasonable agreement with the experimental data. Additionally, the influence that the Lode angle had on quasi-static failure patterns such as cup-cone and slanted failure has been studied numerically. The study has revealed that the combined action of weakened constitutive equations and Lode angle dependent failure criterion has been necessary to predict the previously-mentioned failure patterns

Fast ignition driven by quasi-monoenergetic ions: Optimal ion type and reduction of ignition energies with an ion beam array

Fast ignition of inertial fusion targets driven by quasi-monoenergetic ion beams is investigated by means of numerical simulations. Light and intermediate ions such as lithium, carbon, aluminum and vanadium have been considered. Simulations show that the minimum ignition energies of an ideal configuration of compressed Deuterium-Tritium are almost independent on the ion atomic number. However, they are obtained for increasing ion energies, which scale, approximately, as Z2, where Z is the ion atomic number. Assuming that the ion beam can be focused into 10 ?m spots, a new irradiation scheme is proposed to reduce the ignition energies. The combination of intermediate Z ions, such as 5.5 GeV vanadium, and the new irradiation scheme allows a reduction of the number of ions required for ignition by, roughly, three orders of magnitude when compared with the standard proton fast ignition scheme.

Dificultades en el aprendizaje del diseño de software orientado a objetos: un estudio cualitativo longitudinal

Las compañías de desarrollo de software buscan reducir costes a través del desarrollo de diseños que permitan: a) facilidad en la distribución del trabajo de desarrollo, con la menor comunicación de las partes; b) modificabilidad, permitiendo realizar cambios sobre un módulo sin alterar las otras partes y; c) comprensibilidad, permitiendo estudiar un módulo del sistema a la vez. Estas características elementales en el diseño de software se logran a través del diseño de sistemas cuasi-descomponibles, cuyo modelo teórico fue introducido por Simon en su búsqueda de una teoría general de los sistemas. En el campo del diseño de software, Parnas propone un camino práctico para lograr sistemas cuasi-descomponibles llamado el Principio de Ocultación de Información. El Principio de Ocultación de Información es un criterio diferente de descomposición en módulos, cuya implementación logra las características deseables de un diseño eficiente a nivel del proceso de desarrollo y mantenimiento. El Principio y el enfoque orientado a objetos se relacionan debido a que el enfoque orientado a objetos facilita la implementación del Principio, es por esto que cuando los objetos empiezan a tomar fuerza, también aparecen paralelamente las dificultades en el aprendizaje de diseño de software orientado a objetos, las cuales se mantienen hasta la actualidad, tal como se reporta en la literatura. Las dificultades en el aprendizaje de diseño de software orientado a objetos tiene un gran impacto tanto en las aulas como en la profesión. La detección de estas dificultades permitirá a los docentes corregirlas o encaminarlas antes que éstas se trasladen a la industria. Por otro lado, la industria puede estar advertida de los potenciales problemas en el proceso de desarrollo de software. Esta tesis tiene como objetivo investigar sobre las dificultades en el diseño de software orientado a objetos, a través de un estudio empírico. El estudio fue realizado a través de un estudio de caso cualitativo, que estuvo conformado por tres partes. La primera, un estudio inicial que tuvo como objetivo conocer el entendimiento de los estudiantes alrededor del Principio de Ocultación de Información antes de que iniciasen la instrucción. La segunda parte, un estudio llevado a cabo a lo largo del período de instrucción con la finalidad de obtener las dificultades de diseño de software y su nivel de persistencia. Finalmente, una tercera parte, cuya finalidad fue el estudio de las dificultades esenciales de aprendizaje y sus posibles orígenes. Los participantes de este estudio pertenecieron a la materia de Software Design del European Master in Software Engineering de la Escuela Técnica Superior de Ingenieros Informáticos de la Universidad Politécnica de Madrid. Los datos cualitativos usados para el análisis procedieron de las observaciones en las horas de clase y exposiciones, entrevistas realizadas a los estudiantes y ejercicios enviados a lo largo del período de instrucción. Las dificultades presentadas en esta tesis en sus diferentes perspectivas, aportaron conocimiento concreto de un estudio de caso en particular, realizando contribuciones relevantes en el área de diseño de software, docencia, industria y a nivel metodológico. ABSTRACT The software development companies look to reduce costs through the development of designs that will: a) ease the distribution of development work with the least communication between the parties; b) changeability, allowing to change a module without disturbing the other parties and; c) understandability, allowing to study a system module at a time. These basic software design features are achieved through the design of quasidecomposable systems, whose theoretical model was introduced by Simon in his search for a general theory of systems. In the field of software design, Parnas offers a practical way to achieve quasi-decomposable systems, called The Information Hiding Principle. The Information Hiding Principle is different criterion for decomposition into modules, whose implementation achieves the desirable characteristics of an efficient design at the development and maintenance level. The Principle and the object-oriented approach are related because the object-oriented approach facilitates the implementation of The Principle, which is why when objects begin to take hold, also appear alongside the difficulties in learning an object-oriented software design, which remain to this day, as reported in the literature. Difficulties in learning object-oriented software design has a great impact both in the classroom and in the profession. The detection of these difficulties will allow teachers to correct or route them before they move to the industry. On the other hand, the industry can be warned of potential problems related to the software development process. This thesis aims to investigate the difficulties in learning the object-oriented design, through an empirical study. The study was conducted through a qualitative case study, which consisted of three parts. The first, an initial study was aimed to understand the knowledge of the students around The Information Hiding Principle before they start the instruction. The second part, a study was conducted during the entire period of instruction in order to obtain the difficulties of software design and their level of persistence. Finally, a third party, whose purpose was to study the essential difficulties of learning and their possible sources. Participants in this study belonged to the field of Software Design of the European Master in Software Engineering at the Escuela Técnica Superior de Ingenieros Informáticos of Universidad Politécnica de Madrid. The qualitative data used for the analysis came from the observations in class time and exhibitions, performed interviews with students and exercises sent over the period of instruction. The difficulties presented in this thesis, in their different perspectives, provided concrete knowledge of a particular case study, making significant contributions in the area of software design, teaching, industry and methodological level.

Outward Rectification of Voltage-Gated K+ Channels Evolved at Least Twice in Life History

Voltage-gated potassium (K+) channels are present in all living systems. Despite high structural similarities in the transmembrane domains (TMD), this K+ channel type segregates into at least two main functional categories—hyperpolarization-activated, inward-rectifying (Kin) and depolarization-activated, outward-rectifying (Kout) channels. Voltage-gated K+ channels sense the membrane voltage via a voltage-sensing domain that is connected to the conduction pathway of the channel. It has been shown that the voltage-sensing mechanism is the same in Kin and Kout channels, but its performance results in opposite pore conformations. It is not known how the different coupling of voltage-sensor and pore is implemented. Here, we studied sequence and structural data of voltage-gated K+ channels from animals and plants with emphasis on the property of opposite rectification. We identified structural hotspots that alone allow already the distinction between Kin and Kout channels. Among them is a loop between TMD S5 and the pore that is very short in animal Kout, longer in plant and animal Kin and the longest in plant Kout channels. In combination with further structural and phylogenetic analyses this finding suggests that outward-rectification evolved twice and independently in the animal and plant kingdom.

Pinus banksiana has at least seven expressed alcohol dehydrogenase genes in two linked groups

The alcohol dehydrogenase (Adh) gene family is much more complex in Pinus banksiana than in angiosperms, with at least seven expressed genes organized as two tightly linked clusters. Intron number and position are highly conserved between P. banksiana and angiosperms. Unlike angiosperm Adh genes, numerous duplications, as large as 217 bp, were observed within the noncoding regions of P. banksiana Adh genes and may be a common feature of conifer genes. A high frequency of duplication over a wide range of scales may contribute to the large genome size of conifers.

On the geometry of solutions of the quasi-geostrophic and Euler equations

We study solutions of the two-dimensional quasi-geostrophic thermal active scalar equation involving simple hyperbolic saddles. There is a naturally associated notion of simple hyperbolic saddle breakdown. It is proved that such breakdown cannot occur in finite time. At large time, these solutions may grow at most at a quadruple-exponential rate. Analogous results hold for the incompressible three-dimensional Euler equation.

Interaction of Coatomer with Aminoglycoside Antibiotics: Evidence That Coatomer Has at Least Two Dilysine Binding Sites

Coatomer is the soluble precursor of the COPI coat (coat protein I) involved in traffic among membranes of the endoplasmic reticulum and the Golgi apparatus. We report herein that neomycin precipitates coatomer from cell extracts and from purified coatomer preparations. Precipitation first increased and then decreased as the neomycin concentration increased, analogous to the precipitation of a polyvalent antigen by divalent antibodies. This suggested that neomycin cross-linked coatomer into large aggregates and implies that coatomer has two or more binding sites for neomycin. A variety of other aminoglycoside antibiotics precipitated coatomer, or if they did not precipitate, they interfered with the ability of neomycin to precipitate. Coatomer is known to interact with a motif (KKXX) containing adjacent lysine residues at the carboxyl terminus of the cytoplasmic domains of some membrane proteins resident in the endoplasmic reticulum. All of the antibiotics that interacted with coatomer contain at least two close amino groups, suggesting that the antibiotics might be interacting with the di-lysine binding site of coatomer. Consistent with this idea, di-lysine itself blocked the interaction of antibiotics with coatomer. Moreover, di-lysine and antibiotics each blocked the coating of Golgi membranes by coatomer. These data suggest that certain aminoglycoside antibiotics interact with di-lysine binding sites on coatomer and that coatomer contains at least two of these di-lysine binding sites.

Effects of the Heartbeat Wales programme over five years on behavioural risks for cardiovascular disease: quasi-experimental comparison of results from Wales and a matched reference area

Objective: To assess the net 5 year effects of intervention of a community based demonstration project, the Heartbeat Wales programme, on modifiable behavioural risks for prevention of cardiovascular disease.