Doses monitoring in radiology: calibration of air kerma-area product (PKA) meters

Objective The authors have sought to study the calibration of a clinical PKA meter (Diamentor E2) and a calibrator for clinical meters (PDC) in the Laboratory of Ionizing Radiation Metrology at Instituto de Energia e Ambiente - Universidade de São Paulo. Materials and Methods Different qualities of both incident and transmitted beams were utilized in conditions similar to a clinical setting, analyzing the influence from the reference dosimeter, from the distance between meters, from the filtration and from the average beam energy. Calibrations were performed directly against a standard 30 cm3 cylindrical chamber or a parallel-plate monitor chamber, and indirectly against the PDC meter. Results The lowest energy dependence was observed for transmitted beams. The cross calibration between the Diamentor E2 and the PDC meters, and the PDC presented the greatest propagation of uncertainties. Conclusion The calibration coefficient of the PDC meter showed to be more stable with voltage, while the Diamentor E2 calibration coefficient was more variable. On the other hand, the PDC meter presented greater uncertainty in readings (5.0%) than with the use of the monitor chamber (3.5%) as a reference.

Offering planning process development: Bridging the Offering Gaps and Consolidating Top Priority Needs in Product Offering

The aim of this Thesis is to study how to manage the front-end of the offering planning process. This includes actual process development and methods to gather and analyze information to achieve the best outcome in customer oriented product offering. Study is carried out in two parts: theoretical part and company related part. Theoretical framework is created introducing different types of approaches to manage product planning processes. Products are seen as platforms and they are broken down to subsystems to show different parts of the development. With the help of the matrix-based approaches product platform related information is gathered and analyzed. In this kind of analysis business/market drivers and cus-tomer/competitor information are connected with product subsystems. This gives possibilities to study product gaps/needs and possible future ideas/scenarios in different customer segments. Company related part consists of offering planning process development in real company environment. Process formation includes documents and tools that guide planning from the information gathering to the prioritization and decision making.

Assessment of an information product project success: case business blueprint

The objective of this study was to find out how project success can be measured in a case where the output of a project is an intangible information product, what kind of framework can be used to evaluate the project success, and how the project assessment can be done in practice. As a case example, the success of a business blueprint project was assessed from the product point of view. A framework for assessing business blueprint project success was made based on a literature review. Furthermore, separate frameworks for measuring information product quality and project costs were developed. The theory of business blueprinting was discovered not to be firmly institutionalized and it is briefly covered in the thesis. The possible net benefits from the strategic business process harmonization were noted to be much more significant than the costs of the business blueprint project. The project was seen as a sufficient success from the viewpoint of the created output.

Creating Global Competitive Advantage by Global Product Technology Transfers

Globalization is the trend which is realized in all areas in today’s business world. Pressure for cost reduction, changes in market situation and available scale economies have changed business environment more global than ever. To respond to new situation, companies are establishing global strategies. In this thesis, available global competitive advantages in electrical machine industry are studied in context of gaining them by global technology transfers. In theory part, establishing global strategy and competitive advantage is considered with connection to global sourcing and supply chain management. Additionally, market development in 21st century and its impact on global strategies is studied. In practice, global manufacturing is enabled by technology transfer projects. Smooth and fast project implementation enables faster and more flexible production ramp up. By starting the production available competitive advantages can be realized. In this thesis the present situation of technology transfer projects and the risks and advantages related to global manufacturing are analyzed. The analysis of implemented technology transfer projects indicates that project implementation is in good level. For further development of project execution 10 minor suggestions could be presented with two major ones: higher level standardization and development of product information model to support better global manufacturing.

Structuration and branding of a religious tourism product: Catalonia sacra

This article aims to provide an overview of the products Catalonia has to offer in terms of religious tourism. The growing interest in this kind of tourism worldwide, and in Catalonia itself, along with the region's wealth of religious heritage (particularly connected to the Christian Church) contrast with the lack of religion-based tourism products available, which results in its absence from the region's image as a tourism destination. In view of this, the Faculty of Tourism (University of Girona), the Vic Bishopric's Albergueria-Centre for Cultural Dissemination and the Tarraconense Episcopal Conference's Interdiocese Secretariat for the Custody and Promotion of Holy Art (SICPAS) decided to address the situation with the help of funding from the Autonomous Government of Catalonia. In order to re-position Christian religious heritage in the image of Catalonia as a tourist destination, the aforementioned parties embarked upon a project to set up a series of routes throughout the region, branded under the name Catalonia Sacra

Kolmiulotteisen konenakojärjestelmän soveltuminen matkapuhelimen alikokoonpanojen testaukseen massatuotannossa

Tässä diplomityössä tutkitaan kolmiulotteisen konenak6järjestelmän soveltuvuutta matkapuhelimien alikokoonpanojen testaukseen massatuotannossa. Tavoitteena oli saada tietoa 3D järjestelmän käytettävyydestä suorituskyvyn ja kapasiteetin suhteen sekä selvittää järjestelmän joustavuutta testattavia tuotteita vaihdettaessa. Haluttiin myös selvittää, että ratkaiseeko 3D järjestelmä käytössä olevan 2D järjestelmän kanssa ilmenneitä ongelmia Järjestelmän suorituskykyä tutkittiin tekemällä testiajoja, joista saatuja tuloksia analysoitiin tilastollisella laadunvalvontaohjelmistolla. Varsinaisen kehitystyön teki konenäköjärjestelmiin erikoistunut alihankkija, jolla on kokemusta 3D testauksesta muilta teollisuuden aloilta. Matkapuhelimien alikokoonpanojen testauksessa laatukriteerit ja tarkkuusvaatimukset ovat kuitenkin liian kovia saavutettaviksi 3D lasertriangulaatioon perustuvaa testausjärjestelmää käytettäessä

Product Data Managemet as a Key Success Factor in After Sales Business

The objective of this master’s thesis is to define Larox´s Product Data present state and future development needs from after sales point of view. In particular the object was to investigate after sales needs, which data related to products need to be managed by using Product Data Management. Empirical material of thesis was collected mainly through interviews, benchmark visits, and personal experience. Among the interviewees were internal stakeholders who are closely related to the product process, as well as external stakeholders. Interviews revealed that each stakeholder group has deviating needs for product data management and that at present all the needs are not met to take the best possible way. The main requirement was availability of up-to-date information, which plays a key role in after sales business. At the end of study is concentrated to find development targets at Larox, especially from after sales point of view. In addition, consideration of how the product data management advantages can utilized in making internal processes more efficient. Development needs are collected together as project descriptions, whose headings are shown at the end of the study.

Organic chicken product authentication: state-of-the-art and future perspectives

Organic food products are highly susceptible to fraud. Currently, administrative controls are conducted to detect fraud, but having an analytical tool able to verify the organic identity of food would be very supportive. The state-of-the-art in food authentication relies on fingerprinting approaches that find characteristic analytical patterns to unequivocally identify authentic products. While wide research on authentication has been conducted for other commodities, the authentication of organic chicken products is still in its infancy. Challenges include finding fingerprints to discriminate organic from conventional products, and recruiting sample sets that cover natural variability. Future research might be oriented towards developing new authentication models for organic feed, eggs and chicken meat, keeping models updated and implementing them into regulations. Meanwhile, these models might be very supportive to the administrative controls directing inspections towards suspicious fraudulent samples.

Anisotropic surface properties of micro/nanostructured a-C:H:F thin films with self-assembly applications

The singular properties of hydrogenated amorphous carbon (a-C:H) thin filmsdeposited by pulsed DC plasma enhanced chemical vapor deposition (PECVD), such as hardness and wear resistance, make it suitable as protective coating with low surface energy for self-assembly applications. In this paper, we designed fluorine-containing a-C:H (a-C:H:F) nanostructured surfaces and we characterized them for self-assembly applications. Sub-micron patterns were generated on silicon through laser lithography while contact angle measurements, nanotribometer, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were used to characterize the surface. a-C:H:F properties on lithographied surfaces such as hydrophobicity and friction were improved with the proper relative quantity of CH4 and CHF3 during deposition, resulting in ultrahydrophobic samples and low friction coefficients. Furthermore, these properties were enhanced along the direction of the lithographypatterns (in-plane anisotropy). Finally, self-assembly properties were tested with silicananoparticles, which were successfully assembled in linear arrays following the generated patterns. Among the main applications, these surfaces could be suitable as particle filter selector and cell colony substrate.

Informed recommender: basing recommendations on consumer product reviews

Recommender systems attempt to predict items in which a user might be interested, given some information about the user's and items' profiles. Most existing recommender systems use content-based or collaborative filtering methods or hybrid methods that combine both techniques (see the sidebar for more details). We created Informed Recommender to address the problem of using consumer opinion about products, expressed online in free-form text, to generate product recommendations. Informed recommender uses prioritized consumer product reviews to make recommendations. Using text-mining techniques, it maps each piece of each review comment automatically into an ontology

Bio-based composites from stone groundwood applied to new product development

This paper deals with the product design, engineering, and material selection intended for the manufacturing of an eco-friendly chair. The final product is expected to combine design attributes with technical and legal feasibility with the implementation of new bio-based materials. Considering the industrial design, a range of objectives and trends were determined after setting the market requirements, and the final concept was proposed and modeled. The product geometry, production technology, and legal specifications were the input data for product engineering. The material selection was based on the technical requirements. Polypropylene (PP) composite materials based on coupled-fiberglass, sized-fiberglass, and coupled-stone ground wood reinforcements were prepared and characterized. Final formulations based on these PP composites are proposed and justified

Assembly Methods of Permanent Magnets for Synchronous Generators

This thesis examines and explains the procedure used to redesign the attachment of permanent magnets to the surface of the rotor of a synchronous generator. The methodology followed to go from the actual assembly to converge to the final purposed innovation was based on the systematic approach design. This meant that first a series of steps had to be predefined as a frame of reference later to be used to compare and select proposals, and finally to obtain the innovation that was sought. Firstly, a series of patents was used as the background for the upcoming ideas. To this end, several different patented assemblies had been found and categorized according the main element onto which this thesis if focused, meaning the attachment element or method. After establishing the technological frame of reference, a brainstorm was performed to obtain as many ideas as possible. Then these ideas were classified, regardless of their degree of complexity or usability, since at this time the quantity of the ideas was the important issue. Subsequently, they were compared and evaluated from different points of view. The comparison and evaluation in this case was based on the use of a requirement list, which established the main needs that the design had to fulfill. Then the selection could be done by grading each idea in accordance with these requirements. In this way, one was able to obtain the idea or ideas that best fulfilled these requirements. Once all of the ideas were compared and evaluated, the best or most suitable idea or ideas were separated. Finally, the selected idea or ideas was/were analyzed in extension and a number of improvements were made. Consequently, a final idea was refined and made more suitable at its performance, manufacture, and life cycle assessment. Therefore, in the end, the design process gave a solution to the problem pointed out at the beginning.

Cost estimation framework for modular product

Cost estimation is an important, but challenging process when designing a new product or a feature of it, verifying the product prices given by suppliers or planning a cost saving actions of existing products. It is even more challenging when the product is highly modular, not a bulk product. In general, cost estimation techniques can be divided into two main groups - qualitative and quantitative techniques - which can further be classified into more detailed methods. Generally, qualitative techniques are preferable when comparing alternatives and quantitative techniques when cost relationships can be found. The main objective of this thesis was to develop a method on how to estimate costs of internally manufactured and commercial elevator landing doors. Because of the challenging product structure, the proposed cost estimation framework is developed under three different levels based on past cost information available. The framework consists of features from both qualitative and quantitative cost estimation techniques. The starting point for the whole cost estimation process is an unambiguous, hierarchical product structure so that the product can be classified into controllable parts and is then easier to handle. Those controllable parts can then be compared to existing past cost knowledge of similar parts and create as accurate cost estimates as possible by that way.