Nanotechnology in food industry II: risk assessment and legislation

Currently, there is increasing use of nanomaterials in the food industry thanks to the many advantages offered and make the products that contain them more competitive in the market. Their physicochemical properties often differ from those of bulk materials, which require specialized risk assessment. This should cover the risks to the health of workers and consumers as well as possible environmental risks. The risk assessment methods must go updating due to more widespread use of nanomaterials, especially now that are making their way down to consumer products. Today there is no specific legislation for nanomaterials, but there are several european dispositions and regulations that include them. This review gives an overview of the risk assessment and the existing current legislation regarding the use of nanotechnology in the food industry.

Ordered arrays of multiferroic epitaxial nanostructures

Epitaxial heterostructures combining ferroelectric (FE) and ferromagnetic (FiM) oxides are a possible route to explore coupling mechanisms between the two independent order parameters, polarization and magnetization of the component phases. We report on the fabrication and properties of arrays of hybrid epitaxial nanostructures of FiM NiFe(2)O(4) (NFO) and FE PbZr(0.52)Ti(0.48)O(3) or PbZr(0.2)Ti(0.8)O(3), with large range order and lateral dimensions from 200 nm to 1 micron. METHODS: The structures were fabricated by pulsed-laser deposition. High resolution transmission electron microscopy and high angle annular dark-field scanning transmission electron microscopy were employed to investigate the microstructure and the epitaxial growth of the structures. Room temperature ferroelectric and ferrimagnetic domains of the heterostructures were imaged by piezoresponse force microscopy (PFM) and magnetic force microscopy (MFM), respectively. RESULTS: PFM and MFM investigations proved that the hybrid epitaxial nanostructures show ferroelectric and magnetic order at room temperature. Dielectric effects occurring after repeated switching of the polarization in large planar capacitors, comprising ferrimagnetic NiFe2O4 dots embedded in ferroelectric PbZr0.52Ti0.48O3 matrix, were studied. CONCLUSION: These hybrid multiferroic structures with clean and well defined epitaxial interfaces hold promise for reliable investigations of magnetoelectric coupling between the ferrimagnetic / magnetostrictive and ferroelectric / piezoelectric phases.

Interface-mediated ferroelectric patterning and Mn valency in nano-structured PbTiO3/La0.7Sr0.3MnO3

We employed a multitechnique approach using piezo-force response microscopy and photoemission microscopy to investigate a self-organizing polarization domain pattern in PbTiO3/La0.7Sr0.3MnO3 (PTO/LSMO) nanostructures. The polarization is correlated with the nanostructure morphology as well as with the thickness and Mn valence of the LSMO template layer. On the LSMO dots, the PTO is upwards polarized, whereas outside the nanodots, the polarization appears both strain and interface roughness dependent. The results suggest that the electronic structure and strain of the PTO/LSMO interface contribute to determining the internal bias of the ferroelectric layer.

Safety Assessment Tool for Construction Zone Work Phasing Plans, 2016

The Highway Safety Manual (HSM) is the compilation of national safety research that provides quantitative methods for analyzing highway safety. The HSM presents crash modification functions related to freeway work zone characteristics such as work zone duration and length. These crash modification functions were based on freeway work zones with high traffic volumes in California. When the HSM-referenced model was calibrated for Missouri, the value was 3.78, which is not ideal since it is significantly larger than 1. Therefore, new models were developed in this study using Missouri data to capture geographical, driver behavior, and other factors in the Midwest. Also, new models for expressway and rural two-lane work zones that barely were studied in the literature were developed. A large sample of 20,837 freeway, 8,993 expressway, and 64,476 rural two-lane work zones in Missouri was analyzed to derive 15 work zone crash prediction models. The most appropriate samples of 1,546 freeway, 1,189 expressway, and 6,095 rural two-lane work zones longer than 0.1 mile and with a duration of greater than 10 days were used to make eight, four, and three models, respectively. A challenging question for practitioners is always how to use crash prediction models to make the best estimation of work zone crash count. To solve this problem, a user-friendly software tool was developed in a spreadsheet format to predict work zone crashes based on work zone characteristics. This software selects the best model, estimates the work zone crashes by severity, and converts them to monetary values using standard crash estimates. This study also included a survey of departments of transportation (DOTs), Federal Highway Administration (FHWA) representatives, and contractors to assess the current state of the practice regarding work zone safety. The survey results indicate that many agencies look at work zone safety informally using engineering judgment. Respondents indicated that they would like a tool that could help them to balance work zone safety across projects by looking at crashes and user costs.

Public Perceptions of the Midwest's Pavements - Executive Summary: Iowa

This report summarizes Iowa results of a five year, Pooled Fund study involving the Wisconsin, Iowa, and Minnesota Departments of Transportation (DOTs) designed to 1) assess the public's perceptions of the DOTs' pavement improvement strategies and 2) develop customer-based thresholds of satisfaction with pavements on rural two lane highways in each state as related to the DOTs' physical indices, such as pavement ride and condition. The primary objective was to seek systematic customer input to improve the DOTs' pavement improvement policies by 1) determining how drivers perceive the DOTs' pavements in terms of comfort and convenience but also in terms of other tradeoffs the DOTs had not previously considered, 2) determining relationships between perceptions and measured pavement condition thresholds (including a general level of tolerance of winter ride conditions in two of the states), and 3) identifying important attributes and issues that may not have been considered in the past. Secondary objectives were 1) to provide a tool for systematic customer input in the future and 2) to provide information which can help structure public information programs. A University of Wisconsin-Extension survey lab conducted the surveys under the direction of a multi-disciplinary team from Marquette University. Approximately 4500 drivers in the 3 states participated in the 3 phases of the project. Researchers conducted 6 focus groups in each state, approximately 400 statewide telephone interviews in each state and 700-800 targeted telephone interviews in each state. Approximately 400 winter ride interviews were conducted in Wisconsin and Minnesota. A summary of the method for each survey is included. In Phase I, focus groups were conducted with drivers to get an initial indication of what the driving public believes in regards to pavements and to frame issues for inclusion in the more representative statewide surveys of drivers conducted in Phase II. Phase II interviews gathered information about improvement policy tradeoff issues and about preliminary thresholds of improvement in terms of physical pavement indices. In Phase III, a two step recruitment and post-drive interview procedure yielded thresholds of ride and condition index summarized for each state. Results show that, in general, the driving public wants longer lasting pavements and are willing to pay for them. They want to minimize construction delay, improve entire sections of highway at one time but they dislike detours, and prefer construction under traffic even if it stretches out construction time. Satisfaction with pavements does not correlate directly to a high degree with physical pavement indices, but was found instead to be a complex, multi-faceted phenomenon. A psychological model was applied to explain satisfaction to a respectable degree for the social sciences. Results also indicate a high degree of trust in the 3 DOTs which is enhanced when the public is asked for input on specific highway segments. Conclusions and recommendations include a 3-step methodology for other state studies.

Implication du virus Epstein-Barr ainsi que de la protéine virale EBNA1 dans la modification de l’épissage alternatif et dans le développement du cancer de l’estomac

Le virus Epstein-Barr est un des virus dotés de propriétés oncogéniques. Ceci est inquiétant car le virus est présent sous forme d’infection latente dans 95% de la population adulte au niveau mondial. Bien que ce virus soit associé surtout aux lymphomes, d’autres types de cancer sont aussi connus par leur association à cette infection tels que le carcinome gastrique. En fait, 10% de tous les cas de carcinome gastrique sont associés à la présence du virus Epstein-Barr. Plusieurs protéines du virus ont été étudiées individuellement afin d’établir leurs propriétés oncogéniques. Parmi celles-ci, la protéine virale EBNA1 joue un rôle important au niveau de la carcinogénèse et son expression est détectée au niveau des tissus gastriques cancéreux associés à l’infection par le virus Epstein-Barr. Des études réalisées au cours de ces dernières années montrent la relation entre un patron aberrant de l’épissage alternatif des ARN messagers et différents types de cancer, comme le cancer du sein et de la prostate. Les travaux de recherche présentés dans ce mémoire visent à établir si le virus Epstein-Barr est capable de changer le patron d’épissage alternatif au niveau des tissus cancéreux de l’estomac. L’utilisation de données de séquençage à haut débit fait sur des tissus cancéreux et tissus sains d’estomac (infectés ou non par le virus Epstein-Barr) permettra d’estimer les changements au niveau du patron d’épissage alternatif en relation à l’état des tissus et de la présence du virus Epstein-Barr. Les résultats obtenus nous montrent que l’épissage alternatif de plus de 500 gènes est altéré lorsque le virus est présent. Parmi ces gènes plusieurs codent pour des facteurs d’épissage, des facteurs de transcription, et des suppresseurs de tumeurs qui pourraient être impliqués dans le processus de développement du cancer. Finalement, nos résultats montrent que le patron d’épissage alternatif d’une cellule est modifié lorsque celle-ci est infectée par le virus Epstein-Barr ou qu’elle exprime une de ses protéines virales EBNA1, et ces altérations touchent plusieurs gènes impliqués dans des processus biologiques et qui semblent favoriser le développement du cancer.

Quasilinear elliptic systems with measure data

We study the existence of solutions of quasilinear elliptic systems involving $N$ equations and a measure on the right hand side, with the form $$\left\{\begin{array}{ll} -\sum_{i=1}^n \frac{\partial}{\partial x_i}\left(\sum\limits_{\beta=1}^{N}\sum\limits_{j=1}^{n}% a_{i,j}^{\alpha,\beta}\left( x,u\right)\frac{\partial}{\partial x_j}u^\beta\right)=\mu^\alpha& \mbox{ in }\Omega ,\\ u=0 & \mbox{ on }\partial\Omega, \end{array}\right.$$ where $\alpha\in\{1,\dots,N\}$ is the equation index, $\Omega$ is an open bounded subset of $\mathbb{R}^{n}$, $u:\Omega\rightarrow\mathbb{R}^{N}$ and $\mu$ is a finite Randon measure on $\mathbb{R}^{n}$ with values into $\mathbb{R}^{N}$. Existence of a solution is proved for two different sets of assumptions on $A$. Examples are provided that satisfy our conditions, but do not satisfy conditions required on previous works on this matter.

Self-Assembled InAs/GaAs Quantum Dot Solar Cells

Our work focuses on experimental and theoretical studies aimed at establishing a fundamental understanding of the principal electrical and optical processes governing the operation of quantum dot solar cells (QDSC) and their feasibility for the realization of intermediate band solar cell (IBSC). Uniform performance QD solar cells with high conversion efficiency have been fabricated using carefully calibrated process recipes as the basis of all reliable experimental characterization. The origin for the enhancement of the short circuit current density (Jsc) in QD solar cells was carefully investigated. External quantum efficiency (EQE) measurements were performed as a measure of the below bandgap distribution of transition states. In this work, we found that the incorporation of self-assembled quantum dots (QDs) interrupts the lattice periodicity and introduce a greatly broadened tailing density of states extending from the bandedge towards mid-gap. A below-bandgap density of states (DOS) model with an extended Urbach tail has been developed. In particular, the below-bandgap photocurrent generation has been attributed to transitions via confined energy states and background continuum tailing states. Photoluminescence measurement is used to measure the energy level of the lowest available state and the coupling effect between QD states and background tailing states because it results from a non-equilibrium process. A basic I-V measurement reveals a degradation of the open circuit voltage (Voc) of QD solar cells, which is related to a one sub-bandgap photon absorption process followed by a direct collection of the generated carriers by the external circuit. We have proposed a modified Shockley-Queisser (SQ) model that predicts the degradation of Voc compared with a reference bulk device. Whenever an energy state within the forbidden gap can facilitate additional absorption, it can facilitate recombination as well. If the recombination is non-radiative, it is detrimental to solar cell performance. We have also investigated the QD trapping effects as deep level energy states. Without an efficient carrier extraction pathway, the QDs can indeed function as mobile carriers traps. Since hole energy levels are mostly connected with hole collection under room temperature, the trapping effect is more severe for electrons. We have tried to electron-dope the QDs to exert a repulsive Coulomb force to help improve the carrier collection efficiency. We have experimentally observed a 30% improvement of Jsc for 4e/dot devices compared with 0e/dot devices. Electron-doping helps with better carrier collection efficiency, however, we have also measured a smaller transition probability from valance band to QD states as a direct manifestation of the Pauli Exclusion Principle. The non-linear performance is of particular interest. With the availability of laser with on-resonance and off-resonance excitation energy, we have explored the photocurrent enhancement by a sequential two-photon absorption (2PA) process via the intermediate states. For the first time, we are able to distinguish the nonlinearity effect by 1PA and 2PA process. The observed 2PA current under off-resonant and on-resonant excitation comes from a two-step transition via the tailing states instead of the QD states. However, given the existence of an extended Urbach tail and the small number of photons available for the intermediate states to conduction band transition, the experimental results suggest that with the current material system, the intensity requirement for an observable enhancement of photocurrent via a 2PA process is much higher than what is available from concentrated sun light. In order to realize the IBSC model, a matching transition strength needs to be achieved between valance band to QD states and QD states to conduction band. However, we have experimentally shown that only a negligible amount of signal can be observed at cryogenic temperature via the transition from QD states to conduction band under a broadband IR source excitation. Based on the understanding we have achieved, we found that the existence of the extended tailing density of states together with the large mismatch of the transition strength from VB to QD and from QD to CB, has systematically put into question the feasibility of the IBSC model with QDs.

Politisations différentielles et acculturations mutuelles en contexte autoritaire : ethnographie d'une inversion du cens électoral

Français L'observation ethnographique des politisations différentielles pendant une campagne électorale en contexte autoritaire changeant est un analyseur privilégié de plusieurs processus. Sur un plan empirique, elle donne à voir les modalités diversifiées d'appropriation du moment électoral par les acteurs, les tentatives d'ajustement d'une partie de la gauche marocaine à la perte de son électorat de granit et aux transformations du marché électoral, mais également un mouvement de fond : celui de l'inversion ponctuelle du principe censitaire, en lien avec la désertion des urnes par les plus dotés culturellement et matériellement et avec la mutation du vote urbain populaire. Sur un plan théorique, l'examen des tâtonnements en oeuvre - avant leur naturalisation - permet de poursuivre le dialogue entre les travaux sur le clientélisme politique et sur la politisation, au croisement des approches socio-historiques et de sociologie politique, en contextes autoritaires et démocratiques. Il montre l'intérêt de dépasser les oppositions entre conceptions restrictives et extensives de la politisation, pour se saisir processuellement et in situ des politisations différentielles des acteurs, des registres et des pratiques. English Differential Forms of Politicization and Mutual Acculturation in an Authoritarian ContextThe ethnographic observation of differential forms of politicization during an electoral campaign in a changing authoritarian context is an ideal means of analyzing a number of processes. Empirically, it enables us to observe the actors' diverse ways of appropriating the electoral moment, a Moroccan leftist party's attempts to adjust to the loss of its electoral base and the transformations of the electoral market. It also enables us to observe a one-time reversal of the symbolic voting restrictions, in correlation with the desertion of the polls by the those best equipped to participate, both culturally and materially, and with the transformation of the urban popular vote. In theoretical terms, examination of such ongoing processes - before their stabilization - allows us to follow the interplay between the work on political clientelism and on politicization, at the intersection of sociohistorical and political sociological approaches, in authoritarian and democratic contexts. It demonstrates the value of moving beyond the opposition between restrictive and extensive conceptions of politicization, to grasp the process in situ of differential forms of the politicization of actors, registers and practices.

La transformation de l'espace rural, l'industrialisation et les relations ville-campagne entre Coaticook et les cantons de Barnston et de Barford, 1853-1921

Cette étude des relations ville-campagne prolonge la réflexion amorcée à la suite d'un cours d'histoire régionale que donna Peter Southam. Ayant choisi d'analyser le développement économique de Coaticook dans une perspective strictement urbaine, je fis la découverte d'une carte qui se présenta comme une véritable révélation puisqu'elle traduisait toute la problématique sous-jacente à un espace polarisé. En effet, on pouvait découvrir, face à l'unité distincte de Coaticook, deux structures identiques, les municipalités de cantons de Barnston et de Barford, représentant, grâce à la présence des réseaux hydrographiques, routiers et ferroviaires, un terrain d'application idéale pour l'analyse des relations ville-campagne. De là est né notre intérêt d'analyser, dans un contexte ville-campagne, les fonctions de relations des deux entités spatiales en présence, l'une urbaine, l'autre rurale, évoluant en interaction toutes deux dans le cadre des Cantons de l'Est, région qui est elle-même étroitement intégrée à l'économie continentale nord-américaine. Au-delà de cette insertion à un espace économique plus vaste, notre étude se doit d'abord de rendre compte de la spécificité des deux entités spatiales. Le choix spatial de notre thèse est arbitraire et ne repose pas, par exemple, sur la zone d'influence de Coaticook bien que, et c'est là une des hypothèses que nous démontrerons plus tard, il est certain que le rayonnement de Coaticook dans un espace polarisé ne s'est pas limité aux cantons de Barnston et de Barford. Par ailleurs, si nous privilégions comme cadre spatial d'analyse l'échelle du territoire urbain et celle du canton selon leurs limites administratives respectives, nous envisagerons également l'échelle de la communauté villageoise comme l'un des axes principaux du rapport ville-campagne. Les divisions administratives ne s'étendant qu'à deux localités rurales (Dixville et Saint-Herménégilde), nous ne tenterons pas de délimiter l'aire villageoise des autres localités. Puisque nous nous intéressons davantage au phénomène villageois selon un critère fonctionnel, nous considérons alors le village "comme un lieu et une forme d'habitat dotés d'attributs et de fonctions distinctives". En fait, le choix spatial sera d'ordre documentaire puisqu'il est imposé par l'utilisation des recensements fédéraux (manuscrits et imprimés) et par l'utilisation des Mercantile Agency, sources principales sur lesquelles il sera plus facile de présenter une démonstration cohérente dans le temps comme dans l'espace. […]

Growth and characterization of III-V compound semiconductor nanostructures by metalorganic chemical vapor deposition

Planar <110> GaAs nanowires and quantum dots grown by atmospheric MOCVD have been introduced to non-standard growth conditions such as incorporating Zn and growing them on free-standing suspended films and on 10° off-cut substrates. Zn doped nanowires exhibited periodic notching along the axis of the wire that is dependent on Zn/Ga gas phase molar ratios. Planar nanowires grown on suspended thin films give insight into the mobility of the seed particle and change in growth direction. Nanowires that were grown on the off-cut sample exhibit anti-parallel growth direction changes. Quantum dots are grown on suspended thin films and show preferential growth at certain temperatures. Envisioned nanowire applications include twin-plane superlattices, axial pn-junctions, nanowire lasers, and the modulation of nanowire growth direction against an impeding barrier and varying substrate conditions.

Image-Guided Precision Manipulation of Cells and Nanoparticles in Microfluidics

Manipulation of single cells and particles is important to biology and nanotechnology. Our electrokinetic (EK) tweezers manipulate objects in simple microfluidic devices using gentle fluid and electric forces under vision-based feedback control. In this dissertation, I detail a user-friendly implementation of EK tweezers that allows users to select, position, and assemble cells and nanoparticles. This EK system was used to measure attachment forces between living breast cancer cells, trap single quantum dots with 45 nm accuracy, build nanophotonic circuits, and scan optical properties of nanowires. With a novel multi-layer microfluidic device, EK was also used to guide single microspheres along complex 3D trajectories. The schemes, software, and methods developed here can be used in many settings to precisely manipulate most visible objects, assemble objects into useful structures, and improve the function of lab-on-a-chip microfluidic systems.

Strong quantum memory at resonant Fermi edges revealed by shot noise

Studies of non-equilibrium current fluctuations enable assessing correlations involved in quantum transport through nanoscale conductors. They provide additional information to the mean current on charge statistics and the presence of coherence, dissipation, disorder, or entanglement. Shot noise, being a temporal integral of the current autocorrelation function, reveals dynamical information. In particular, it detects presence of non-Markovian dynamics, i.e., memory, within open systems, which has been subject of many current theoretical studies. We report on low-temperature shot noise measurements of electronic transport through InAs quantum dots in the Fermi-edge singularity regime and show that it exhibits strong memory effects caused by quantum correlations between the dot and fermionic reservoirs. Our work, apart from addressing noise in archetypical strongly correlated system of prime interest, discloses generic quantum dynamical mechanism occurring at interacting resonant Fermi edges.