Developing a robust self evaluation framework for active learning:the first stage of an ERASMUS+ project (QAEMarketPlace4HEI)

In ensuring the quality of learning and teaching in Higher Education, self-evaluation is an important component of the process. An example would be the approach taken within the CDIO community whereby self-evaluation against the CDIO standards is part of the quality assurance process. Eight European universities (Reykjavik University, Iceland; Turku University of Applied Sciences, Finland; Aarhus University, Denmark; Helsinki Metropolia University of Applied Sciences, Finland; Ume? University, Sweden; Telecom Bretagne, France; Aston University, United Kingdom; Queens University Belfast, United Kingdom) are engaged in an EU funded Erasmus + project that is exploring the quality assurance process associated with active learning. The development of a new self-evaluation framework that feeds into a ?Marketplace? where participating institutions can be paired up and then engage in peer evaluations and sharing around each institutions approach to and implementation of active learning. All of the partner institutions are engaged in the application of CDIO within their engineering programmes and this has provided a common starting point for the partnership to form and the project to be developed. Although the initial focus will be CDIO, the longer term aim is that the approach could be of value beyond CDIO and within other disciplines. The focus of this paper is the process by which the self-evaluation framework is being developed and the form of the draft framework. In today?s Higher Education environment, the need to comply with Quality Assurance standards is an ever present feature of programme development and review. When engaging in a project that spans several countries, the wealth of applicable standards and guidelines is significant. In working towards the development of a robust Self Evaluation Framework for this project, the project team decided to take a wide view of the available resources to ensure a full consideration of different requirements and practices. The approach to developing the framework considered: a) institutional standards and processes b) national standards and processes e.g. QAA in the UK c) documents relating to regional / global accreditation schemes e.g. ABET d) requirements / guidelines relating to particular learning and teaching frameworks e.g. CDIO. The resulting draft self-evaluation framework is to be implemented within the project team to start with to support the initial ?Marketplace? pairing process. Following this initial work, changes will be considered before a final version is made available as part of the project outputs. Particular consideration has been paid to the extent of the framework, as a key objective of the project is to ensure that the approach to quality assurance has impact but is not overly demanding in terms of time or paperwork. In other words that it is focused on action and value added to staff, students and the programmes being considered.

El autocuidado y apoyo social de mujeres de un proyecto de seguimiento mamográfico en Porto Alegre/Brasil

Objective: Identify preventive self-care practices and analyze the configurations of the network support for women with and without breast cancer registered in a mammography-monitoring project from Porto Alegre/Brazil.Method: a mixed sequential delimitation was performed, which expanded the results of the quantitative step (cross and correlation section) in a qualitative step (narrative interviews). 37 women diagnosed with breast cancer (group 1) and 72 without this diagnosis (group 2 – monitoring) participated. The following instruments were used: Assessment Questionnaire Self-care Ability (ASA-A) and Assessment Questionnaire Perceived Social Support and Community. There were performed descriptive analysis and comparison of means (t test and ANOVA) between the two groups. To deepen the understanding of the data, we selected four women with breast cancer with extreme levels on the scale of Social Support to participate in the biographical narrative interviews.Results: the analysis indicate that women who had breast cancer have better self-care practices than the women from the monitoring project (t = 1.791, P = 0.027). As for the analysis of social support, there were no statistically significant differences between the two groups. All participants have an average level of perceived social and community support. It was highlighted by the qualitative data that it was after the diagnosis of breast cancer that women lived self-care aspects they had not previously experienced.Conclusions: the self-care was significantly bigger in the group of women with breast cancer, where the cancer diagnosis was a trigger to increase self-care.

O museu virtual Google Art Project : um estudo de caso em contexto de ensino-aprendizagem da educação visual

A educação na arte e pela arte confere a todos os seus intervenientes a estimulação da sua criatividade e da sua consciência cultural, proporcionando meios para se exprimirem e participarem ativamente no mundo que nos rodeia. A integração das tecnologias de informação e comunicação no processo de ensino-aprendizagem veio alargar o papel que a arte pode desempenhar neste processo, promovendo novas formas de aprender, de ensinar e de pensar. Assim, a utilização de ambientes virtuais em contexto educativo tem revelado um enorme potencial, sobretudo ao nível da comunicação e da interação entre alunos e obras de arte. Neste sentido, considerou-se importante desenvolver um estudo de caso em contexto de sala de aula da Educação Visual, promovendo uma aprendizagem baseada na articulação entre a observação, interpretação e análise da obra de arte e o museu virtual. Assim o principal objetivo deste estudo foi avaliar as potencialidades do Google Art Project, enquanto objeto de aprendizagem, na promoção da aprendizagem na área da literacia em artes. Para além disso, procurámos ainda avaliar se a utilização de ferramentas multimédia como o referido Google Art Project e o Quadro Interativo, constituem fatores de motivação na aprendizagem da disciplina de Educação Visual. Do ponto de vista metodológico desenvolvemos uma estratégia baseada na investigação-ação. Procurámos, por um lado, descobrir e compreender o significado de uma realidade vivida por um grupo de alunos e, por outro lado, refletir sobre a prática educativa com o intuito de a melhorar e transformar. Este estudo envolveu cinco turmas do sexto ano do ensino público. Para a recolha de dados utilizámos técnicas baseadas na conversação e na observação, no questionário e nas notas de campo. Os resultados deste estudo revelam que as ferramentas tecnológicas utilizadas podem efetivamente contribuir para a promoção da aprendizagem dos alunos na área da Educação Visual, mais concretamente ao nível do domínio da literacia artística, da representação e da interpretação visual.

Novel efficient technologies in Europe for axle bearing condition monitoring – the MAXBE project

Axle bearing damage with possible catastrophic failures can cause severe disruptions or even dangerous derailments, potentially causing loss of human life and leading to significant costs for railway infrastructure managers and rolling stock operators. Consequently the axle bearing damage process has safety and economic implications on the exploitation of railways systems. Therefore it has been the object of intense attention by railway authorities as proved by the selection of this topic by the European Commission in calls for research proposals. The MAXBE Project (http://www.maxbeproject.eu/), an EU-funded project, appears in this context and its main goal is to develop and to demonstrate innovative and efficient technologies which can be used for the onboard and wayside condition monitoring of axle bearings. The MAXBE (interoperable monitoring, diagnosis and maintenance strategies for axle bearings) project focuses on detecting axle bearing failure modes at an early stage by combining new and existing monitoring techniques and on characterizing the axle bearing degradation process. The consortium for the MAXBE project comprises 18 partners from 8 member states, representing operators, railway administrations, axle bearing manufactures, key players in the railway community and experts in the field of monitoring, maintenance and rolling stock. The University of Porto is coordinating this research project that kicked-off in November 2012 and it is completed on October 2015. Both on-board and wayside systems are explored in the project since there is a need for defining the requirement for the onboard equipment and the range of working temperatures of the axle bearing for the wayside systems. The developed monitoring systems consider strain gauges, high frequency accelerometers, temperature sensors and acoustic emission. To get a robust technology to support the decision making of the responsible stakeholders synchronized measurements from onboard and wayside monitoring systems are integrated into a platform. Also extensive laboratory tests were performed to correlate the in situ measurements to the status of the axle bearing life. With the MAXBE project concept it will be possible: to contribute to detect at an early stage axle bearing failures; to create conditions for the operational and technical integration of axle bearing monitoring and maintenance in different European railway networks; to contribute to the standardization of the requirements for the axle bearing monitoring, diagnosis and maintenance. Demonstration of the developed condition monitoring systems was performed in Portugal in the Northern Railway Line with freight and passenger traffic with a maximum speed of 220 km/h, in Belgium in a tram line and in the UK. Still within the project, a tool for optimal maintenance scheduling and a smart diagnostic tool were developed. This paper presents a synthesis of the most relevant results attained in the project. The successful of the project and the developed solutions have positive impact on the reliability, availability, maintainability and safety of rolling stock and infrastructure with main focus on the axle bearing health.

The Australian Universities Teaching Committee project in 'Learning Outcomes and Curriculum Development in Psychology'

The Australian Universities Teaching Committee (AUTC) funds projects intended to improve the quality of teaching and learning in specific disciplinary areas. The project brief for 'Learning Outcomes and Curriculum Development in Psychology' for 2004/2005 was to 'produce an evaluative overview of courses ... with a focus on the specification and assessment of learning outcomes and ... identify strategic directions for universities to enhance teaching and learning'. This project was awarded to a consortium from The University of Queensland, University of Tasmania, and Southern Cross University. The starting point for this project is an analysis of the scientist-practitioner model and its role in curriculum design, a review of current challenges at a conceptual level, and consideration of the implications of recent changes to universities relating to such things as intemationalisation of programs and technological advances. The project will seek to bring together stakeholders from around the country in order to survey the widest possible range of perspectives on the project brief requirements. It is hoped also to establish mechanisms for fiiture scholarly discussion of these issues, including the establishment of an Australian Society for the Teaching of Psychology and an annual conference.

A high performance wireless fieldbus in industrial multimedia-related environment

This paper summarises the most important solutions that have emerged from the work carried out by our team within the framework of the EU (IST-1999-11316) project RFieldbus - High Performance Wireless Fieldbus in Industrial Multimedia-Related Environment. Within this project, Profibus was chosen as the fieldbus platform. Essentially, extensions to the current Profibus standard are being developed in order to provide Profibus with wireless, mobility and industrialmultimedia capabilities. In fact, providing these extensions means fulfilling strong requirements, namely to encompass the communication between wired (currently available) and wireless/mobile devices and to support real-time control traffic and multimedia traffic in the same network.

Intra-hospital organ and tissue donation coordination project: cost-effectiveness and social benefits

OBJECTIVE To evaluate the viability of a professional specialist in intra-hospital committees of organ and tissue donation for transplantation. METHODS Epidemiological, retrospective and cross-sectional study (2003-2011 and 2008-2012), which was performed using organ donation for transplants data in the state of Sao Paulo, Southeastern Brazil. Nine hospitals were evaluated (hospitals 1 to 9). Logistic regression was used to evaluate the differences in the number of brain death referrals and actual donors (dependent variables) after the professional specialist started work (independent variable) at the intra-hospital committee of organ and tissue donation for transplantation. To evaluate the hospital invoicing, the hourly wage of the doctor and registered nurse, according to the legislation of the Consolidation of Labor Laws, were calculated, as were the investment return and the time elapsed to do so. RESULTS Following the nursing specialist commencement on the committee, brain death referrals and the number of actual donors increased at hospital 2 (4.17 and 1.52, respectively). At hospital 7, the number of actual donors also increased from 0.005 to 1.54. In addition, after the nurse started working, hospital revenues increased by 190.0% (ranging 40.0% to 1.955%). The monthly cost for the nurse working 20 hours was US$397.97 while the doctor would cost US$3,526.67. The return on investment was 275% over the short term (0.36 years). CONCLUSIONS This paper showed that including a professional specialist in intra-hospital committees for organ and tissue donation for transplantation proved to be cost-effective. Further economic research in the area could contribute to the efficient public policy implementation of this organ and tissue harvesting model.

Estudo de campo de verificação metrológica de termómetros clínicos timpânicos

Avaliação da variação da temperatura corporal, e a monitorização da mesma é bastante importante na prática clínica sendo, por vezes, a base de muitas decisões clínicas. Atualmente, os termómetros digitais, em particular os timpânicos são amplamente utilizados, em contexto hospitalar e domiciliário. Muitos estudos têm sido efetuados para determinar a validade das medições obtidas através de termómetros timpânicos. Os defensores destes termómetros afirmam que, se forem utilizados de forma adequada e periodicamente calibrados, a avaliação da temperatura corporal com este tipo de termómetros é eficaz, cómoda, rápida, pouco invasiva emais higiénica reduzindo o número de infeções cruzadas (FarnellMaxwell &Tan, Rhodes& Philips, 2005). A Metrologia como a ciência das medições e suas aplicações ((VIM1: 2.2) (INSTITUTO PORTUGUÊS DA QUALIDADE, 2012)), abrange todos os aspetos teóricos e práticos que asseguram a exatidão e precisão exigida num processo, procurando garantir a qualidade de produtos e serviços através da calibração de instrumentos de medição e da realização de ensaios, sendo a base fundamental para a competitividade das empresas. Só após o ano 1990, com a publicação dos resultados doHarvardMedical Practice Study (T A BRENNAN, 2004), sobre adventos adversos na área da saúde, começaram a surgir preocupação com o risco do uso de equipamentos e instrumentos sem a adequada avaliação metrológica. Neste estudo concluiu-se que 3,7 % dos pacientes hospitalizados sofriam eventos adversos devido ao uso inadequado de equipamento médico, sendo que 13,6% destes eram mortais. Pegando nesta realidade e sabendo que o não controlo de Equipamento de Monitorização e Medição é uma das causas de obtenção de 36%de não conformidades - 7.6 (NP EN ISO 9001:2008), em Auditorias da Qualidade em Serviços de Saúde (Luís Marinho – Centro Hospitalar São João), fez todo o sentido o estudo e trabalho desenvolvido. Foi efetuado um estudo, no que se refere a normalização em vigor e verificou-se que a nível metrológico muito trabalho terá que ser realizado no serviço nacional de saúde por forma este fornecer o suporte material fiável ao sistema de medições, essencial aos mais diversos sectores da saúde. Sabendo-se que os ensaios/calibrações são necessários e não são negligenciáveis na estrutura de custos das instituições de saúde, e por isso são vistas como mais uma fonte de despesas, é intenção com a realização deste trabalho, contribuir em parte para superação deste tema. Este trabalho passou pela execução/realização de um procedimento de calibração para termómetros timpânicos, tendo a necessidade de desenvolver/projetar um corpo negro. A amostra em estudo é constituída por cinco termómetros timpânicos hospitalares em uso dos diferentes serviços do CHSJ2, seleccionados completamente ao acaso. Um termómetro clínico no mínimo terá que ser calibrado a temperatura 35 ºC e 42 ºC. A calibração deverá ser realizada anualmente e por entidade acreditada. O erro máximo admissível é de ± 0,2 ºC (nas condições ambientais de funcionamento). Sem a confirmação metrológica, não é possível garantir a qualidade do produto ou serviço. A Metrologia na área da saúde desperta a exigência por produtos e serviços de qualidade. Esta tencionará ser encarada como um pilar de sustentabilidade para a qualidade na saúde, sendo absolutamente necessária a implementação de novos procedimentos e atitudes.

Sistema de recrutamento e seleção num grande grupo empresarial

Este Projeto de Intervenção visou a reestruturação do sistema de Recrutamento e Seleção para o Grande Grupo Empresarial tendo em conta a realidade das várias Empresas. Este projeto surgiu da necessidade de reconfiguração da visão, filosofia e estrutura da Direção de Pessoas e Comunicação (DPC) e pretendeu desenvolver uma proposta de valor aliciante para os talentos atuais e potenciais do mercado e da Organização, numa lógica de prestação de serviços às seis empresas do Grande Grupo Empresarial, designadas por grupo incubador, que foram o público-alvo deste projeto. Numa primeira fase, foi realizada uma breve apresentação do Grande Grupo Empresarial, seguindo-se de uma auditoria às práticas de Recursos Humanos e uma revisão da literatura ao tema identificado para intervenção deste projeto. Baseado na conjugação das análises realizadas anteriormente, definiu-se a finalidade do projeto que consistiu em garantir que, a partir de Janeiro de 2016, o Grande Grupo Empresarial tenha definido um Sistema de Recrutamento e Seleção adequado à estratégia de comunicação da DPC. Esta finalidade foi desdobrada em dois objetivos estratégicos: Concluir a preparação dos novos procedimento de Recrutamento e Seleção para implementação e Concluir a preparação das ferramentas de Recrutamento e Seleção para implementação e foi desenvolvido todo o planeamento operacional, onde se delinearam atividades, tarefas, recursos, calendarização, orçamento e o momento da avaliação do projeto. A fase de implementação teve a duração de 5 meses (Junho a Outubro de 2015) e a sua avaliação realizou-se durante e no final da implementação. Os resultados confirmam o cumprimento dos objetivos operacionais, estratégicos e da finalidade a que este projeto se propôs. A avaliação inclui o feedback obtido da equipa de Recrutamento e Seleção ao longo do desenvolvimento do projeto. A apreciação final por parte de todos os envolvidos é encorajadora para a adoção de uma nova metodologia de trabalho que permitirá à organização a captação e potenciação de talentos internos.

Outcomes of communication competence: A study on a Portuguese restaurant chain

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

From a project to an organisation: a Strategic Communication’s approach

Relatório de Estágio apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ciências da Comunicação, área de especialização em Comunicação Estratégica

Cataract surgery: expectations of patients assisted during a community project in São Paulo, state of São Paulo, Brazil

OBJECTIVE: To identify social characteristics and expectations of individuals seen during a community project for the treatment of senile cataracts. Expected results from their eye surgery and its consequences to their quality of life were studied as well. METHODOLOGY: Cataract patients (visual acuity equal to or lower than 0.2 in the more superior eye) aged 50 years or over, were surveyed by means of interviews held during their visit at the Cataract Project in São Paulo city, State of São Paulo, Brazil, in 1999. RESULTS: The sample was composed of 331 subjects of low socioeconomic level ranging in age from 50 to 97 years (average = 71.8 years). Expectation of total recovery from the cataract condition by means of surgery was declared by 80.0% of the respondents, with no significant differences between male and female subjects (P < 0.1723). Hope to resume manual activities was expressed by 59.8%. CONCLUSION: A predominance of expectations of resuming normal activity and achieving a better quality of life after cataract surgery were identified.

Designing cnc knit for hybrid membrane and bending active structures

Recent advances in computation allow for the integration of design and simulation of highly interrelated systems, such as hybrids of structural membranes and bending active elements. The engaged complexities of forces and logistics can be mediated through the development of materials with project specific properties and detailing. CNC knitting with high tenacity yarn enables this practice and offers an alternative to current woven membranes. The design and fabrication of an 8m high fabric tower through an interdisciplinary team of architects, structural and textile engineers, allowed to investigate means to design, specify, make and test CNC knit as material for hybrid structures in architectural scale. This paper shares the developed process, identifies challenges, potentials and future work.

The importance of risk assessment in the context of investment project management: a case study

Risk management is an important component of project management. Nevertheless, such process begins with risk assessment and evaluation. In this research project, a detailed analysis of the methodologies used to treat risks in investment projects adopted by the Banco da Amazonia S.A. was made. Investment projects submitted to the FNO (Constitutional Fund for Financing the North) during 2011 and 2012 were considered for that purpose. It was found that the evaluators of this credit institution use multiple indicators for risk assessment which assume a central role in terms of decision-making and contribute for the approval or the rejection of the submitted projects; namely, the proven ability to pay, the financial records of project promotors, several financial restrictions, level of equity, level of financial indebtedness, evidence of the existence of a consumer market, the proven experience of the partners/owners in the business, environmental aspects, etc. Furthermore, the bank has technological systems to support the risk assessment process, an internal communication system and a unique system for the management of operational risk.

Biological Parameters and Molecular Markers of Clone CL Brener - The Reference Organism of the Trypanosoma cruzi Genome Project

Clone CL Brener is the reference organism used in the Trypanosoma cruzi Genome Project. Some biological parameters of CL Brener were determined: (a) the doubling time of epimastigote forms cultured in liver infusion-tryptose (LIT) medium at 28oC is 58±13 hr; (b) differentiation of epimastigotes to metacyclic trypomastigotes is obtained by incubation in LIT-20% Grace´s medium; (c) trypomastigotes infect mammalian cultured cells and perform the complete intracellular cycle at 33 and 37oC; (d) blood forms are highly infective to mice; (e) blood forms are susceptible to nifurtimox and benznidazole. The molecular typing of CL Brener has been determined: (a) isoenzymatic profiles are characteristic of zymodeme ZB; (b) PCR amplification of a 24Sa ribosomal RNA sequence indicates it belongs to T. cruzi lineage 1; (c) schizodeme, randomly amplified polymorphic DNA (RAPD) and DNA fingerprinting analyses were performed