Response of segmented bored transit tunnels to surface blast

Increasing threat of terrorism highlights the importance of enhancing the resilience of underground tunnels to all hazards. This paper develops, applies and compares the Arbitrary Lagrangian Eulerian (ALE) and Smooth Particle Hydrodynamics (SPH) techniques to treat the response of buried tunnels to surface explosions. The results and outcomes of the two techniques were compared, along with results from existing test data. The comparison shows that the ALE technique is a better method for describing the tunnel response for above ground explosion with regards to modeling accuracy and computational efficiency. The ALE technique was then applied to treat the blast response of different types of segmented bored tunnels buried in dry sand. Results indicate that the most used modern ring type segmented tunnels were more flexible for in-plane response, however, they suffered permanent drifts between the rings. Hexagonal segmented tunnels responded with negligible drifts in the longitudinal direction, but the magnitudes of in-plane drifts were large and hence hazardous for the tunnel. Interlocking segmented tunnels suffered from permanent drifts in both the longitudinal and transverse directions. Multi-surface radial joints in both the hexagonal and interlocking segments affected the flexibility of the tunnel in the transverse direction. The findings offer significant new information in the behavior of segmented bored tunnels to guide their future implementation in civil engineering applications.

Malaria imported from Ghana by returning gold miners, China, 2013

During May-August 2013, a malaria outbreak comprising 874 persons in Shanglin County, China, was detected among 4,052 persons returning from overseas. Ghana was the predominant destination country, and 92.3% of malarial infections occurred in gold miners. Preventive measures should be enhanced for persons in high-risk occupations traveling to malaria-endemic countries.

Feasibility and acceptability of wrist actigraph in assessing sleep quality and sleep quantity: A home-based pilot study in healthy volunteers

Purpose This study aimed to determine the feasibility and acceptability of actigraphy to monitor sleep quality and quantity in healthy self-rated good sleeper adults at home-based settings. Method Sixteen healthy volunteers (age > 18) were invited to participate. Each participant was provided with a wrist actigraph device to be worn for 24-hour/day for seven consecutive days to monitor their sleep-wake patterns. Actigraphy data were downloaded using-proprietary software to generate an individual-sleep report. Participants also completed a set of self-reported Health Related Quality of Life (HRQOL) using WHO (five) Well Being Index (WBI) questionnaires. Results Actigraphy was well accepted by all participants. Only 43.8% of the participants achieved normal total sleep time (TST) and 62.5% had a mean sleep efficiency value below the normal range. Despite a reduced quality of sleep among the participants, the self-reported HRQOL scores produced by the WHO-5 WBI showed a “fair” to “good” among the participants. Conclusions To maintain healthy well-being, it is vital to have efficient and quality sleep. Insufficient and poor sleep may contribute to various health problems and hazardous outcomes. People often believe they have normal and efficient sleep, not realising they may be developing poor sleep habits. This study found that actigraphy can be easily utilized to monitor sleep-wake patterns at home-based settings. We proposed that actigraphy could be adapted for use in the primary care settings (e.g. community pharmacy) to improve the sleep health management in the community.

Effective emergency messaging during natural disasters: An application of message compliance theories

Study/Objective This research examines the types of emergency messages used in Australia during the response and early recovery phases of a natural disaster. The aim of the research is to develop theory-driven emergency messages that increase individual behavioural compliance during a disaster. Background There is growing evidence of non-compliant behaviour in Australia, such as refusing to evacuate and travelling through hazardous areas. This can result in personal injury, loss of life, and damage to (or loss of) property. Moreover, non-compliance can place emergency services personnel in life-threatening situations when trying to save non-compliant individuals. Drawing on message compliance research in psychology and sociology, a taxonomy of message types was developed to ascertain how emergency messaging can be improved to produce compliant behaviour. Method A review of message compliance literature was conducted to develop the taxonomy of message types previously found to achieve compliance. Seven categories were identified: direct-rational, manipulation, negative phrasing, positive phrasing, exchange appeals, normative appeals, and appeals to self. A content analysis was then conducted to assess the emergency messages evident in the Australian emergency management context. The existing messages were aligned with the literature to identify opportunities to improve emergency messaging. Results & Conclusion The results suggest there is an opportunity to improve the effectiveness of emergency messaging to increase compliance during the response and early recovery phases of a natural disaster. While some message types cannot legally or ethically be used in emergency communication (e.g. manipulative messaging), there is an opportunity to create more persuasive messages (e.g. appeals to self) that personalise the individual’s perception of risk, triggering them to comply with the message.

Proactive behavior-based safety management for construction safety improvement

Construction is one of the most hazardous industries due to its dynamic, temporary, and decentralized nature. The Hong Kong Commissioner for Labor identifies worker behavior as the root cause of construction accidents. Behavior-based safety (BBS) is one effective approach in managing employee safety issues. However, there is little research on the application of BBS in the construction industry. This research proposes an extension of the BBS approach, proactive behavior-based safety (PBBS), to improve construction safety. PBBS integrates the theory of BBS with the technology of Proactive Construction Management System (PCMS). The innovations of PBBS are: (1) automatically monitoring location-based behaviors; (2)quantitatively measuring safety performance; (3) investigating potential causes of unsafe behaviors; and (4) improving the efficiency of safety management. A pilot study of a Hong Kong construction site practicing PBBS was conducted. The experiment results showed that PBBS performed well on construction accident prevention and the Safety Index (SI) of the two project teams, with increased improvements by 36.07% and 44.70% respectively. It is concluded that PBBS is effective and adaptable to construction industry.

New insights from IODP Expedition 340 offshore Montserrat: First drilling of large volcanic island landslides

Montserrat now provides one of the most complete datasets for understanding the character and tempo of hazardous events at volcanic islands. Much of the erupted material ends up offshore, and this offshore record may be easier to date due to intervening hemiplegic sediments between event beds. The offshore dataset includes the first scientific drilling of volcanic island landslides during IODP Expedition 340, together with an unusually comprehensive set of shallow sediment cores and 2-D and 3-D seismic surveys. Most recently in 2013, Remotely Operated Vehicle (ROV) dives mapped and sampled the surface of the main landslide deposits. This contribution aims to provide an overview of key insights from ongoing work on IODP Expedition 340 Sites offshore Montserrat.Key objectives are to understand the composition (and hence source), emplacement mechanism (and hence tsunami generation) of major landslides, together with their frequency and timing relative to volcanic eruption cycles. The most recent major collapse event is Deposit 1, which involved ~1.8 km cubed of material and produced a blocky deposit at ~12-14ka. Deposit 1 appears to have involved not only the volcanic edifice, but also a substantial component of a fringing bioclastic shelf, and material locally incorporated from the underlying seafloor. This information allows us to test how first-order landslide morphology (e.g. blocky or elongate lobes) is related to first-order landslide composition. Preliminary analysis suggests that Deposit 1 occurred shortly before a second major landslide on the SW of the island (Deposit 5). It may have initiated English's Crater, but was not associated with a major change in magma composition. An associated turbidite-stack suggests it was emplaced in multiple stages, separated by at least a few hours and thus reducing the tsunami magnitude. The ROV dives show that mega-blocks in detail comprise smaller-scale breccias, which can travel significant distances without complete disintegration. Landslide Deposit 2 was emplaced at ~130ka, and is more voluminous (~8.4km cubed). It had a much more profound influence on the magmatic system, as it was linked to a major explosive mafic eruption and formation of a new volcanic centre (South Soufriere Hills) on the island. Site U1395 confirms a hypothesis based on the site survey seismic data that Deposit 2 includes a substantial component of pre-existing seafloor sediment. However, surprisingly, this pre-existing seafloor sediment in the lower part of Deposit 2 at Site U1395 is completely undeformed and flat lying, suggesting that Site U1395 penetrated a flat lying block. Work to date material from the upper part of U1396, U1395 and U1394 will also be summarised. This work is establishing a chronostratigraphy of major events over the last 1 Ma, with particularly detailed constraints during the last ~250ka. This is helping us to understand whether major landslides are related to cycles of volcanic eruptions.

Towards the development of a low cost airborne sensing system to monitor dust particles after blasting at open-pit mine sites

Blasting is an integral part of large-scale open cut mining that often occurs in close proximity to population centers and often results in the emission of particulate material and gases potentially hazardous to health. Current air quality monitoring methods rely on limited numbers of fixed sampling locations to validate a complex fluid environment and collect sufficient data to confirm model effectiveness. This paper describes the development of a methodology to address the need of a more precise approach that is capable of characterizing blasting plumes in near-real time. The integration of the system required the modification and integration of an opto-electrical dust sensor, SHARP GP2Y10, into a small fixed-wing and multi-rotor copter, resulting in the collection of data streamed during flight. The paper also describes the calibration of the optical sensor with an industry grade dust-monitoring device, Dusttrak 8520, demonstrating a high correlation between them, with correlation coefficients (R2) greater than 0.9. The laboratory and field tests demonstrate the feasibility of coupling the sensor with the UAVs. However, further work must be done in the areas of sensor selection and calibration as well as flight planning.

Knowledge and behaviors of drunk-driving offenders in Guangzhou, China

Aims To better understand the knowledge and behaviors of drunk-driving offenders relating to alcohol use and driving in the context of recently amended Chinese legislation, and to investigate the involvement of alcohol-use disorders. Design The study was a cross-sectional survey conducted in 2012. Setting and participants: Data were collected at a local jail and 101 participants were recruited while in detention. Measures Questionnaire items examined demographic characteristics as well as practices and knowledge relating to alcohol use and driving. The Alcohol Use Disorders Identification Test (AUDIT) was used to assess hazardous drinking levels. Findings Knowledge about the two legal limits for “drink driving” and for “drunk driving” was low, at 28.3% and 41.4%, respectively. AUDIT scores indicated that a substantial proportion of the offenders had high levels of alcohol-use disorders. Higher AUDIT scores were found among the least experienced drivers, those who lacked knowledge about the legal limits, and recidivist drunk drivers. Conclusions Limited awareness of legal alcohol limits might contribute to offending; high AUDIT scores suggest that hazardous drinking levels may also contribute. This study provides important information to assist in refining community education and prevention efforts.

Multifunctional three-dimensional T-junction graphene micro-wells: Energy-efficient, plasma-enabled growth and instant water-based transfer for flexible device applications

The “third-generation” 3D graphene structures, T-junction graphene micro-wells (T-GMWs) are produced on cheap polycrystalline Cu foils in a single-step, low-temperature (270 °C), energy-efficient, and environment-friendly dry plasma-enabled process. T-GMWs comprise vertical graphene (VG) petal-like sheets that seemlessly integrate with each other and the underlying horizontal graphene sheets by forming T-junctions. The microwells have the pico-to-femto-liter storage capacity and precipitate compartmentalized PBS crystals. The T-GMW films are transferred from the Cu substrates, without damage to the both, in de-ionized or tap water, at room temperature, and without commonly used sacrificial materials or hazardous chemicals. The Cu substrates are then re-used to produce similar-quality T-GMWs after a simple plasma conditioning. The isolated T-GMW films are transferred to diverse substrates and devices and show remarkable recovery of their electrical, optical, and hazardous NO2 gas sensing properties upon repeated bending (down to 1 mm radius) and release of flexible trasparent display plastic substrates. The plasma-enabled mechanism of T-GMW isolation in water is proposed and supported by the Cu plasma surface modification analysis. Our GMWs are suitable for various optoelectronic, sesning, energy, and biomedical applications while the growth approach is potentially scalable for future pilot-scale industrial production.

Reinforcing stigma or delivering a fresh start: Bankruptcy and future engagement in the workforce

In Australia, bankruptcy retains a social stigma, as is often seen as a personal failing, and an indication that the individual cannot be trusted to meet their obligations. Official labelling and informal labelling reinforce this stigmatisation of bankruptcy in employment and business contexts. This occurs through legislation and policy that imposes restrictions on participation in some occupations on the grounds of bankruptcy, and imposes obligations on persons to disclose their bankruptcy to their employer. These restrictions and obligations that are varying in length and extent, both within industries and professions and across industries and professions, and appear to lack a coherent policy justification. Further, informal labelling is facilitated by the law providing for a permanent, publicly accessible record of bankruptcy, and failing to restrict the use of bankruptcy information in employment and business decision-making. This stigmatisation of bankruptcy inhibits the fresh start objective of bankruptcy, and is not supported by a strong correlation between bankruptcy and negative personal or other attributes. This article therefore argues that a review is needed to determine the circumstances in which there is a genuine policy justification for employment restrictions, and the appropriate length and scope of such restrictions. Reform of the Bankruptcy Act should also be considered. Possible areas for law reform including reducing the minimum period of bankruptcy; removing the permanency and/or public accessibility of the bankruptcy record; revising the language used in the Bankruptcy Act; and introducing a prohibition or restriction on the ability of employers to use bankruptcy status in employment decision making. Such changes would promote the fresh start objective of Australia’s bankruptcy system, and increase the likelihood that bankruptcy does not unfairly inhibit an individual’s ability to engage as an economic actor in Australian society and thereby improve their financial well-being.

The creative fulcrum : Where, how and why the creative workforce is growing

Contrary to the view that the creative workforce is shrinking, a decade of detailed research by the ARC Centre of Excellence for Creative Industries and Innovation (CCI) shows that the number of workers in creative occupations is growing strongly, and that these workers are spread right across the whole economy. Furthermore, these occupations can be thought of as a ‘creative fulcrum’ for innovations that leverage competitiveness in all sectors, and create positive job spirals that stimulate opportunities for many other occupation categories.

Worker views on safety at roadworks

Roadworks in live traffic environments are hazardous to workers and road users alike. In an increasing body of international research literature, roadwork risks and hazards have been comprehensively examined. As in the broader field of road safety research, much of the work rightly takes a quantitative approach to assessing risk and related issues and to addressing the identified risks appropriately. In Australia, however, limited official data constrains the ability of researchers to achieve an in-depth understanding of the situation at state/territory and national levels based on traditional quantitative analyses. One way to enhance and supplement the limited available data is to consult those who are directly involved in roadworks for qualitative information, although such an approach is rarely reported in the roadwork safety arena. As part of the major study focusing on safety at roadworks in Queensland, 66 workers were interviewed about their perceptions and experiences regarding roadwork safety. This paper thus outlines a qualitative examination of workers' perceptions of the causes of roadwork incidents and the effectiveness of hazard mitigation measures. Consistent with findings reported in the literature is the view among workers that speeding is a major hazard and that police enforcement is the most effective countermeasure. Other hazards commonly observed by workers but less frequently reported elsewhere include driver distraction and aggression toward workers, working in poor weather and working at night. Workers mostly suggested educational measures to address distraction and aggression issues, though such measures are only tentatively supported in the literature.

A road safety strategy for Norfolk Island, an Australian external territory

Norfolk Island is an Australian external territory in Oceania. The significant road safety reforms in Australia from the 1970s onward bypassed the island, and most road safety ‘silver bullets’ adopted in other Australian jurisdictions were not introduced. While legislative amendments in 2010 introduced mandatory seat belt wearing for vehicle occupants on Norfolk Island, other critical issues face the community including drink driving by residents and visitors, occupant protection for vehicle passengers, and the provision of a more protective road environment. The release of the first Norfolk Island road safety strategy 2014-2016 proposed, inter alia: • a lower BAC of 0.05 and the introduction of compulsory driver alcohol and drug testing by police; • targeted enforcement of occupant protection for vehicle passengers, particularly for passengers riding on vehicle tray backs; • education interventions to challenge values held by some members of the community that support unsafe road use; • ensuring that driver information, training and testing is adequate for all drivers; • identification and rectification of hazardous roadside infrastructure, particularly barrier protection at “high drop locations” within the road network; and • developing a specification for vehicle standards for vehicles imported into Norfolk Island. Norfolk Island is engaging in a process of integration with the Australian community, and wider issues relating to funding and resources have impacted on the implementation of the road safety strategy. The response to the strategy will be discussed, particularly in terms of current attempts to address drink driving and the provision of a safer road environment.

Sisustaminen on kuin käsialaa : Carin Bryggman ja Lasse Ollinkari sisustusarkkitehdin ammatissa 1940- ja 1950-luvulla

"Interior Design is Like Handwriting." Carin Bryggman and Lasse Ollinkari as Interior Designers in the 1940s and 1950s My dissertation deals with the emergence of the interior designer's profession in Finland with focus on the 1940s and 1950s, the postwar years of reconstruction and modernism, as the historical context. The topic is addressed at both the collective and individual levels. Specific subjects of study are the training of interior designers (also known as interior architects), the association of Finnish interior architects (Sisustusarkkitehdit SIO), the professional field and its public image and two leading designers, Carin Bryggman (1920 1993) and Lasse Ollinkari (1921 1993). Though respected figures within the field, Bryggman and Ollinkari have otherwise remained little known and studied. My study presents a great deal of new empiria. The main materials consist of the documents of related institutions and the archives of Bryggman and Ollinkari, in which drawings and photographs figure prominently. The drawings illustrate in a new way the variety of professional tasks in the field. My results are also based on a large body of interviewed material. The materials are approached from two theoretical perspectives, with gender and margins as core concepts from the perspective of women's studies. The even gender division of Finnish interior designers revealed a difference with regard to neighbouring occupations and other countries. I claim that the division of tasks was not defined by gender. The second theoretical basis is the sociological study of professions. The high professional status achieved by interior designers is shown by the fact that of the many related titles in Finnish and Swedish, such as "furniture draughtsman" or "interior artist", interior architect became the established one, despite opposition from architects. My hypothesis that the professionalization of interior designers took place during the two postwar decades proved to be correct. The profession emerged through specialized education and became established with the founding of its own professional organization. From the outset, the goal was to mark a distinction between professionals of interior and furniture design and other designers and architects. Interior designers became a strong and successful modern professional group, involved in a wide range of projects from objects to interiors. Keywords: interior designers, interior architects, interior art, occupations, gender, professions, interior design, furniture, home, public space, Carin Bryggman, Lasse Ollinkari, the Sisustusarkkitehdit SIO association, 1940s and 1950s, reconstruction, modernism.

Kansanomainen moraali : Tutkimus savolaisista ja pohjalaisista uskomustarinoista

In my research I discuss belief legends as representations of folk morals. Doing wrong is not one s private affair because it can have consequences for the life of a whole community, and therefore, it is in a community s interest to control the conduct of its members. Belief legends have served as a means of instruction for proper behaviour. In this way a community has contributed to the socialization of its members so as to make them comply with common norms and morals. My study is focused on belief legends relating to some type of offence (a crime, an infringement or another kind of misdeed) and its consequences. I try to find out whether there are regional differences and similarities. The material consists of 3120 warning legends that have been recorded in the years 1881‒1981, mainly in Southern Savo and Southern Ostrobothnia, partly in Northern Savo and Northern Ostrobothnia. I have collected the material at the Folklore Archives of the Finnish Literature Society. As a research method I apply discourse analysis to outline the schematic model of the legends, the superstructure, and the substance of the legends, the semantic macrostructure. Also I apply quantitative methods such as cross tabulations in order to establish regional differences and similarities in the concentrated and far abstracted semantic macrostructure of the legends. I look for explanations for the perceptions made in, above all, the cultural context but also with the view of the development of judicial history. Warning legends relating to what is wrong or right are clearly an expression of peasant folklore. The most common types of offences are violations of law and transgressions of Christian traditions and of social conduct. Transgression of Christian traditions is the most frequently committed offence in all geographical areas surveyed. Warning legends have an explicit focus on offence committed by a single person. The most common punishing figure in Southern Savo is the Devil, in Southern Ostrobothnia the Dead, in Northern Savo God, and in Northern Ostrobothnia the Dead or God. The most rigid folk morals are manifested in legends from Northern Savo, where narratives of mortal sin are more frequent than in other areas. The influence of the revivalist movements may be alleged in explanation of this phenomenon. According to these legends people living in Southern Savo are the most tolerant of those included in the study, presumably because of a more liberal revivalist movement in this area, called the Friendship movement. In folk morals women are treated more severely than men. Characteristic of the legends from Ostrobothnia is the emphasis on community, while the legends from Savo lay stress on individuality. The legends from Ostrobothnia manifest a more explicit distinction between the offence committed by a woman and one committed by a man than do legends from Savo. An explanation may be found in the prevailing industries, adherent in the division of labour between the sexes, in this region. The legends are man-centric. Women s occupations are connected with home and family, whereas men s fields of activities are wider. Women moralise each other harsher than do men. Folk morals advise people to be moderate in every sense. Through belief legends people are taught to respect human beings and the rest of creation, to obey the Christian religion and God, and to be moderate in search of wealth.