960 resultados para Fluorescent screens.
Resumo:
To study luminescence, reflectance, and color stability of dental composites and ceramics. Materials and Methods: IPS e.max, IPS Classic, Gradia, and Sinfony materials were tested, both unpolished (as-cast) and polished specimens. Coffee, tea, red wine, and distilled water (control) were used as staining drinks. Disk-shaped specimens were soaked in the staining drinks for up to 5 days. Color was measured by a colorimeter. Fluorescence was recorded using a spectrofluorometer, in the front-face geometry. Time-resolved fluorescence spectra were recorded using a laser nanosecond spectrofluorometer. Results: The exposure of the examined dental materials to staining drinks caused changes in color of the composites and ceramics, with the polished specimens exhibiting significantly lower color changes as compared to unpolished specimens. Composites exhibited lower color stability as compared to ceramic materials. Water also caused perceptible color changes in most materials. The materials tested demonstrated significantly different initial luminescence intensities. Upon exposure to staining drinks, luminescence became weaker by up to 40%, dependent on the drink and the material. Time-resolved luminescence spectra exhibited some red shift of the emission band at longer times, with the lifetimes in the range of tens of nanoseconds. Conclusions: Unpolished specimens with a more developed surface have lower color stability. Specimens stored in water develop some changes in their visual appearance. The presently proposed methods are effective in evaluating the luminescence of dental materials. Luminescence needs to be tested in addition to color, as the two characteristics are uncorrelated. It is important to further improve the color and luminescence stability of dental materials.
Resumo:
This study is primarily focused in establishing the solid-state sensory abilities of several luminescent polymeric calix[4]arene-based materials toward selected nitroaromatic compounds (NACs), creating the foundations for their future application as high performance materials for detection of high explosives. The phenylene ethynylene-type polymers possessing bis-calix[4]arene scaffolds in their core were designed to take advantage of the known recognition abilities of calixarene compounds toward neutral guests, particularly in solid-state, therefore providing enhanced sensitivity and selectivity in the sensing of a given analyte. It was found that all the calix[4]arene-poly(para-phenylene ethynylene)s here reported displayed high sensitivities toward the detection of nitrobenzene, 2,4-dinitrotoluene and 2,4,6-trinitrotoluene (TNT). Particularly effective and significant was the response of the films (25-60 nm of thickness) upon exposure to TNT vapor (10 ppb): over 50% of fluorescence quenching was achieved in only 10 s. In contrast, a model polymer lacking the calixarene units showed only reduced quenching activity for the same set of analytes, clearly highlighting the relevance of the macrocyclics in promoting the signaling of the transduction event. The films exhibited high photostability (less than 0.5% loss of fluorescence intensity up to 15 min of continuous irradiation) and the fluorescence quenching sensitivity could be fully recovered after exposure of the quenched films to saturated vapors of hydrazine (the initial fluorescence intensities were usually recovered within 2-5 min of exposure to hydrazine).
Resumo:
This paper reports on the creation of an interface for 3D virtual environments, computer-aided design applications or computer games. Standard computer interfaces are bound to 2D surfaces, e.g., computer mouses, keyboards, touch pads or touch screens. The Smart Object is intended to provide the user with a 3D interface by using sensors that register movement (inertial measurement unit), touch (touch screen) and voice (microphone). The design and development process as well as the tests and results are presented in this paper. The Smart Object was developed by a team of four third-year engineering students from diverse scientific backgrounds and nationalities during one semester.
Resumo:
Right ventricular endomyocardial biopsies were studied in 30 patients, 15 with myocardiopathy from chronic Chagas'disease and 15 with idiopathic congestive myocardiopathy; five other myocardial samples were taken at necropsies of patients with chronic Chagas' disease. The authors tried to establish by means of direct immunofluorescence techniques whether there were immunoglobulins G, A and M, fibrinogen and C3 complement deposition in the myocardium; only one of these 30 patients exhibited a positive reaction to IgG, it was a patient with idiopathic congestive myocardiopathy. All fragments from patients with Chagas' disease showed no response to any of the fluorescent conjugates. These findings do not support the idea that anti-myoeardial antibodies have pathogenic importance in the evolution of dilated or chagasic myocardiopathies.
Resumo:
Lectins were labeled with fluorescein and tried as conjugates in the immunofluorescence (IP) test for the detection of IgM antibodies to T. gondii, in the diagnosis of acute toxoplasmosis. This approach was an attempt to find alternative reagents for anti-human IgM fluorescent conjugates (AHIgMFC), which contain quite frequently anaibcdies to toxoplasma, as contaminants, due to natural T. gondii infections among animals used for imunization. Lentil (Lens culinaris) lectin fluorescence conjugates (LcFC) provided most satisfactory results. The evaluation of LcFC carried out in a total of 179 sera from patients with acute and chronic toxoplasmosis, with non-related infections or healthy subjects, gave high values of relative efficiency, co-positivity and co-negativity indices, respectively 0.989, 0.969 and 1.000, in reference to the conventional AHIgMFC. Moreover, three batches of LcFC successively prepared gave reproducible test results. The advantage of LcFC as an alternative reagent for the serodiagnosis of acute toxoplasmosis is supported by practical aspects of its preparation.
Levantamento elétrico e análise de equipamento para acabamento térmico e químico de telas para pneus
Resumo:
Esta dissertação surge da necessidade da empresa Continental - Indústria Têxtil do Ave S.A. – grupo Continental Mabor atualizar os esquemas elétricos de uma máquina para acabamento térmico e químico de telas para pneus. Esta máquina (Zell) é crucial no seu processo produtivo e foi ao longo dos anos sofrendo sucessivas atualizações no sentido de melhorar o seu processo de produção. Existiam já, esquemas elétricos da máquina realizados em EPLAN no entanto não foram acompanhando as sucessivas alterações sofridas pela mesma. Deste modo, torna-se assim necessário não só produzir um suporte digital desses mesmos esquemas como também proceder à sua atualização. Ao longo desta dissertação o leitor pode obter informações relativas à Zell e ao processo de análise, estudo e documentação dos seus quadros elétricos em software EPLAN Electric P8. São ainda abordadas técnicas de leitura e desenho em EPLAN e descritas algumas das funcionalidade que este permite. É abordada a base de dados criada com informações relativas à máquina tais como características dos seus motores, variadores de frequência e localização dos quadros elétricos ao longo dos pisos que a compõe. No âmbito desta dissertação foi redigido o “Manual da Máquina de Impregnar Zell” e neste relatório abordam-se os principais tópicos que o compõe. Com a atualização dos esquemas tornou-se necessário proceder à identificação de diversos componentes na máquina. Esse processo de identificação é também aqui retratado. O leitor pode por fim obter informações de como realizar um processo de troca de variadores de frequência da marca ABB de diferentes gamas tendo em consideração as ligações em causa para o fazer. Pretende-se assim que o leitor fique com uma noção geral das diferentes vertentes que foram abordadas neste trabalho realizado sob a forma de um estágio com duração de seis meses no seio desta indústria.
Resumo:
Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química e Biológica
Resumo:
Dissertação apresentada à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Audiovisual e Multimédia.
Resumo:
Dissertação submetida à Escola Superior de Teatro e Cinema para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Teatro - especialização em Encenação.
Resumo:
An enzyme-linked immunosorbent assay (ELISA) for measles antibodies was compared with Plaque Neutralization (PRN), Haemagglutination inhibition (HI) and Fluorescent antibody (IFA) tests in 181 sera from vaccinated children and umbilical cord. Of 179 positive samples by the sensitive PRN, only two, with titers of 8, were negative by ELISA (copositivity of 98.9%). IFA and HI presented, respectively, copo-sitivities of 93.3% and 82.7%. The ELISA presented a high sensitivity as well as a good reproducibility and represents an alternative for the time consuming PRN for detection of low measles antibodies.
Resumo:
Abstract Background: Nanotechnology has the potential to provide agriculture with new tools that may be used in the rapid detection and molecular treatment of diseases and enhancement of plant ability to absorb nutrients, among others. Data on nanoparticle toxicity in plants is largely heterogeneous with a diversity of physicochemical parameters reported, which difficult generalizations. Here a cell biology approach was used to evaluate the impact of Quantum Dots (QDs) nanocrystals on plant cells, including their effect on cell growth, cell viability, oxidative stress and ROS accumulation, besides their cytomobility. Results: A plant cell suspension culture of Medicago sativa was settled for the assessment of the impact of the addition of mercaptopropanoic acid coated CdSe/ZnS QDs. Cell growth was significantly reduced when 100 mM of mercaptopropanoic acid -QDs was added during the exponential growth phase, with less than 50% of the cells viable 72 hours after mercaptopropanoic acid -QDs addition. They were up taken by Medicago sativa cells and accumulated in the cytoplasm and nucleus as revealed by optical thin confocal imaging. As part of the cellular response to internalization, Medicago sativa cells were found to increase the production of Reactive Oxygen Species (ROS) in a dose and time dependent manner. Using the fluorescent dye H2DCFDA it was observable that mercaptopropanoic acid-QDs concentrations between 5-180 nM led to a progressive and linear increase of ROS accumulation. Conclusions: Our results showed that the extent of mercaptopropanoic acid coated CdSe/ZnS QDs cytotoxicity in plant cells is dependent upon a number of factors including QDs properties, dose and the environmental conditions of administration and that, for Medicago sativa cells, a safe range of 1-5 nM should not be exceeded for biological applications.
Resumo:
Anti-RESA/Pf155 antibodies were assayed in sera of individuals from three localities (Laranjal do Jari, Vila Padaria and Vila Paraíso) in the State of Amapá, Brazil, during the long-rains and short-rains seasons. All of these had negative blood smears for malaria. Most of the sera collected were positive in Indirect Fluorescent Antibody (IFA) with P. falciparum parasites, with no seasonal variation. A high percentage of these sera (62% to 100%) was RESA positive by Modified Indirect Fluorescent Antibody (MIFA), with a significant (p < 0.05) increase of geometric mean titers during the short-rains season, when the transmission of the disease is highest. ELISA with three repetitive RESA peptides (EENV)3 (4x3), (EENVEHDA)2 (8x2) and (DDEHVEEPTVA)2(11x2) did not reveal statistically significant seasonal variations, although a small enhancement of positivity was observed in V. Padaria (15.3 to 38.8%) in the short-rains season with the 8x2 peptides, and with 4x3 and 8x2 peptides in V. Paraíso, with a decrease in 11x2. MIFA titers appeared to be correlated mainly to the peptide 4x3 and it was the immunodominant in the three localities.
Resumo:
RESUMO Os trabalhos de investigação, conducentes à elaboração do presente estudo morfofuncional, subordinado ao tema da "VASCULARIZAÇÃO ARTERIAL DO ÚTERO",fundamenta-se em conceitos da anatomia descritiva clássica, complementados por técnicas de estudo mais modernas, permitindo-nos observações originais. O principal objectivo é de definir um padrão descritivo da vascularização uterina e de estabelecer uma correlação anatomo-fisiológica e anatomo-clínica na descrição da angiomorfologia uterina, actualizando as descrições clássicas da artéria com dados de observação originais, segundo as técnicas de estudo angiomorfológicas correntemente empregues no Departamento de Anatomia da Faculdade de Ciências Médicas da Universidade Nova de Lisboa. Correlacionam-se as observações com os mais recentes dados publicados, no âmbito da imuno-histoquímica e da moderna bioquímica endocrinológica, uma vez que os conceitos modernos de fisiologia uterina e ginecológica praticamente dominam a vasta literatura científica mundial. Como objectivos particulares, ou linhas orientadoras da tese, escolhemos: - A definição de parâmetros descritivos do padrão genérico da vascularização uterina, actualizando a nomenclatura descritiva de acordo com a moderna Nomina Anatomica mundialmente debatida, desde o XIV Congresso Internacional da Federação Internacional das Associações de Anatomistas, sob a presidência do Prof. Doutor J.A. Esperança Pina (1994) e publicada em 1999-2001. - A comparação do caso humano com o do animal de experiência, por observação meticulosa do maior número de casos possíveis, realizando um estudo comparativo que nos permita extrapolar dados de experimentação animal para o caso humano; - O estabelecimento de uma correlação anatomo-fisiológica, por análise do comportamento da vascularização uterina, ao longo da vida, desde o nascimento até à menopausa, e perante as influências hormonais a que se encontra exposta. A tese constrói-se em torno de três núcleos fundamentais: 1. Um capítulo introdutório, de contextualização teórica, por enquadramento histórico dos estudos dos órgãos genitais femininos e da evolução das técnicas de diagnóstico e terapêutica do útero, focando as primeiras referências à técnica da histerotomia (Cesariana) (com a lenda persa do nascimento do herói Rostam, ou do nascimento do deus Asclepius), as primeiras representações da vascularização uterina (por LEONARDO e iii VESÁLIO), ou as primeiras descrições anatómicas do útero, da autoria de Portugueses (RODRIGO DE CASTRO, 1516 e AMATO LUSITANO, 1551). Prossegue a contextualização teórica com breve referência à recente evolução das técnicas de diagnóstico e terapêutica dos fibromiomas uterinos, mencionando de modo particular a evolução das técnicas de embolização arterial uterina, por nos parecer corresponder a um campo de aplicação imediata dos estudos da vascularização do útero. Termina este capítulo com breve referência aos trabalhos do Prof. Doutor J. MARTINS PISCO que tem actualmente, no nosso País uma das mais extensas listas de trabalhos efectuados com sucesso a nível mundial, no campo da embolização arterial de fibromiomas uterinos. 2. O segundo núcleo fundamental, intitulado "Angiomorfologia uterina" corresponde a extensa revisão bibliográfica dos estudos descritivos da vascularização uterina, desde logo ilustrando a resenha teórica com algumas imagens fotográficas de úteros humanos, seleccionadas da nossa colecção. A descrição da vascularização uterina, fundamentada em 1500 citações bibliográficas, organiza-se, de acordo com o paralelismo entre a estratificação histológica e angiológica do órgão, e a hierarquia funcional, regulada pelas cíclicas variações hormonais. Descreve-se a camada serosa e correspondente vascularização; a camada muscular e vascularização do miométrio; e, por fim, a camada mucosa e os vasos endometriais. Verifica-se, perante os dados colhidos da literatura mundial, o interesse do aprofundamento dos estudos morfológicos da microvascularização endometrial e da adaptação das descrições aos resultados dos modernos estudos funcionais obtidos por técnicas da imuno-histoquímica. 3. Fundamentados nos dados colhidos das revisões bibliográficas, elaborámos um projecto de investigação original, visando o estabelecimento da relação morfo-funcional resultante do aprofundamento dos estudos descritivos da angiomorfologia e da microvascularização do útero. O capítulo de trabalho experimental organiza-se em três principais passos: – No capítulo de Materiais e métodos, procede-se à escolha, por um lado do animal de experiência mais adequado para os estudos da vascularização uterina (por estudo comparativo ao longo da escala animal) e, por outro lado, à escolha de três das técnicas disponíveis no Laboratório de Anatomia Experimental e aplicáveis à investigação angiomorfológica do útero; iv - No capítulo de Resultados, procedemos à exposição das nossas observações de 25 úteros humanos e de 154 úteros de animais de experiência, segundo as três técnicas seleccionadas (dissecção, Injecção-corrosão-fluorescência, Injecção-diafanização e injecção-corrosão paraobservação de moldes vasculares em microscopia electrónica de varrimento), organizando aselecção da vasta iconografia coleccionada em três novos subcapítulos: o útero humano, oútero do animal de experiência e um estudo comparativo, essencial para validar osresultados do trabalho experimental. - O capítulo de trabalho experimental, inteiramente efectuado por estudos na artéria uterina do rato Wistar, abrange primeiramente a tentativa de definição macroscópica de territórios de vascularização, seguido das observações microscópicas conducentes à definição dos parâmetros angiomorfológicos característicos de cada uma das etapas da grande variabilidade a que se sujeita a vascularização uterina, ao longo da vida, incluindo a infância, a gravidez, a paridade e o envelhecimento, e consoante as fases do ciclo hormonal ovárico. Aperfeiçoámos essa tarefa com a elaboração de três experiências distintas, para análise dos efeitos microvasculares uterinos da administração exógena de preparados comerciais hormonais, por observação em microscopia electrónica de varrimento. De acordo com as leituras da literatura clássica sobre a metodologia do trabalho científico, completamos os trabalhos por um capítulo de síntese e critica dos resultados, sequencialmente organizado consoante cada um dos passos experimentais atrás referidos. SUMMARY The aim of the present thesis is the description of the uterine arterial network, complementing the classical concepts of descriptive Anatomy with modern techniques of anatomical research, thus achieving original final results and observations. One of the main objectives of the research is to establish physiological and clinical correlations in the description of the uterine angiomorphology, with the techniques currently available for angiomorphological research in the Department of Anatomy of Faculty of Medical Sciences of the New University of Lisbon. As guidelines to our research, we established the following specific objectives: - defining the descriptive parameters of the standard pattern of the uterine vasculature, according to the modern Nomina Anatomica, as underlined in the latest Federative Congresses of the International Federation of the Associations of Anatomists, one of which took place in Lisbon, in 1994, under the presidency of Professor J.A. Esperança Pina, the supervisor of the present works; - comparing the human uterus with the uterus of the experimental animal, to extrapolate the experimental observations in animals to the particular case of the human uterus; - establishing a correlation between the physiology and the anatomical observations of the uterine vasculature throughout life, from childhood to menopause and in relation to the hormonal influences to which the uterus is exposed. The thesis is built around three main chapters: 1) The introduction chapter defines the historical framework of the studies of the female genital anatomy and the historical evolution of the clinical management of common uterine diseases, focusing on the first historical references to the Caesarean section (such as the Persian legend of the birth of the hero ROSTAM, or that of the birth of ASCLEPIUS, the Greek god of Medicine); the first depictions of the uterine vasculature (by LEONARDO and VESALIUS) or the first anatomical descriptions of the uterus, by Portuguese authors (RODRIGO DE CASTRO, 1517, or AMATUS LUSITANUS, 1551). The theoretical context proceeds, with reference to the recent evolution of the clinical and surgical management of uterine fibroids, and a particular mention to the modern techniques of Uterine Fibroid Embolisation, which corresponds to one of the fields of interest of the anatomic studies of uterine arterial vascularization. 2) The second chapter, devoted to the anatomical description of the Uterine Angiomorphology, is based on an extensive review of the available Medical literature,illustrated by a selection of our own research observations of the human uterine vasculature. The description is organized in view of the parallelism between histological and angiological stratification and the functional hierarchy, under the control of the cyclic hormonal variations. Each layer of the uterine wall is depicted with photographs of the human uterus and descriptions of its specific vascular network: the serosa, the muscular Myometrium, and the mucosa, or endometrium. This classical description, based on extensive quotations of the international scientific literature, enhances our interest for the research of a more detailed knowledge of the endometrial microvascular network, accordingly to the modern physiologic results obtained through immunohistochemical studies. 3) The results of our experimental research, aiming to establish the intimate relationship between the anatomical and functional studies of uterine vasculature, are organized in three main steps: - The chapter of Materials and Methods debates the choice of the experimental animal, based on a short review of the comparative anatomy of the uterus, and uterine physiology, throughout the animal scale. The selection of three fundamental techniques of anatomic research is made from the current variety available in the Laboratory of Experimental Anatomy of the Lisbon School of Medical Sciences. - The Results of our personal research and observations of 25 human and 154 animal uteri,after dissection, and the techniques of arterial injection for the preparation of fluorescent corrosion casts, of vascular injection and clearing, and of arterial injection and preparation of corrosion casts for Scanning Electron Microscopy are rganized in terms of human or animal macroscopic anatomy and microvascular network, followed by a summary of the comparative anatomy of human and rat uteri, which is essential to validate the resultant experimental observations of the rat endometrial microvasculature. - The experimental research is entirely devoted to the uterine artery of the Wistar rat. The first step consists of the attempt to define macroscopic territories of vascularization, followed by microscopic observations for the definition of the angiomorphological pattern that is characteristic of each stage of the extreme variations to which the uterus is subject throughout life, from childhood to sexual maturity, throughout the hormonal cycle, in pregnancy, according to parity, and through ageing. We complete these observations with the experimental exposure of the Wistar rat uterus to pharmacologic preparations of hormones, currently available in clinical practice, and observations of the vascular uterine changes in Scanning Electron Microscopy. The outcome results of our anatomical observations are followed by a critical synthesis of the results.
Resumo:
Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Biológica – especialidade Engenharia Genética, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia
Resumo:
Um dos princípios da Gestão é: “If you cannot measure it, you cannot improve it.” In The Economist – 26.Dez.2008, idea of 19th century English physicist Lord Kelvin. Embora seja uma afirmação aplicável à gestão económica, também pode ser utilizada no domínio da gestão da energia. Este trabalho surge da necessidade sentida pela empresa Continental - Industria Têxtil do Ave, S.A. em efetuar uma atualização dos seus standards de produção, minimizando os seus consumos de eletricidade e gás natural. Foi necessário efetuar o levantamento dos consumos em diversas máquinas e equipamentos industriais, caracterizando e analisando os consumos ao longo de todo o processo produtivo. Para o tratamento de dados recolhidos foi desenvolvida uma folha de cálculo em MS Office ExcelTM com metodologia adequada ao equipamento em análise, que dará apoio ao decisor para a identificação dos aspetos que melhorem o processo produtivo e garantam uma elevada eficiência energética. Porém, não se enquadra no âmbito do Plano Nacional de Racionalização de Energia, sendo uma “auditoria energética” ao processo produtivo. Recentemente, a empresa, tem vindo a utilizar equipamentos eletrónicos que permitem otimizar o funcionamento mecânico dos equipamentos e das potências instaladas dos transformadores, na tentativa de racionalizar o consumo da energia elétrica. Outros equipamentos como, conversores de frequência para controlo de motores, balastros eletrónicos que substituem os convencionais balastros ferromagnéticos das lâmpadas de descarga fluorescente, têm sido incluídos ao nível das instalações elétricas, sendo gradualmente substituída a eletromecânica pela eletrónica. Este tipo de soluções vem deteriorar as formas de onda da corrente e da tensão do sistema pela introdução de distorções harmónicas. Faz ainda parte deste trabalho, um estudo de uma solução que melhore, simultaneamente o fator de potência e reduza as harmónicas presentes num posto de transformação localizado no seio da fábrica. Esta solução, permite melhorar a qualidade da energia elétrica e as condições de continuidade de serviço, garantindo melhores condições de exploração e incrementando a produtividade da empresa.