Flowers of Gomphrena globosa L. as an alternatve source of betacyanins: optimization of the extraction using response surface methodology

Betacyanins are betalain pigments that display a red-violet colour which have been reported to be three times stronger than the red-violet dye produced by anthocyanins [1]. The applications of betacyanins cover a wide range of matrices, mainly as additives or ingredients in the food industry, cosmetics, pharmaceuticals and livestock feed. Although, being less commonly used than anthocyanins and carotenoids, betacyanins are stable between pH 3 to 7 and suitable for colouring in low acid matrices. In addition, betacyanins have been reported to display interesting medicinal character as powerful antioxidant and chemopreventive compounds either in vitro or in vivo models [2]. Betacyanins are obtained mainly from the red beet of Beta vulgaris plant (between I 0 to 20 mg per I 00 g pulp) but alternative primary sources are needed [3]. In addition, independently of the source used, the effect of the variables that affect the extraction of betacyanins have not been properly described and quantified. Therefore, the aim of this study was to identifY and optimize the conditions that maximize betacyanins extraction using the tepals of Gomphrena globosa L. flowers as an alternative source. Assisted by the statistical technique of response surface methodology, an experimental design was developed for testing the significant explanatory variables of the extraction (time, temperature, solid-liquid ratio and ethanolwater ratio). The identification was performed using high-performance liquid chromatography coupled with a photodiode array detector and mass spectrometry with electron spray ionization (HPLC-PDAMS/ ESI) and the response was measured by the quantification of these compounds using HPLC-PDA. Afterwards, a response surface analysis was performed to evaluate the results. The major betacyanin compounds identified were gomphrenin 11 and Ill and isogomphrenin IJ and Ill. The highest total betacyanins content was obtained by using the following conditions: 45 min of extraction. time, 35•c, 35 g/L of solid-liquid ratio and 25% of ethanol. These values would not be found without optimizing the conditions of the betacyanins extraction, which moreover showed contrary trends to what it has been described in the scientific bibliography. More specifically, concerning the time and temperature variables, an increase of both values (from the common ones used in the bibliography) showed a considerable improvement on the betacyanins extraction yield without displaying any type of degradation patterns.

Nitrogen vs argon: what is the most effective atmosphere for shelf-life extension of buckler sorrel leaves?

Buckler sorrel (Rumex induratus Boiss. & Reut.) is an underutilized leafy vegetable with peculiar sensory properties and potential as a gourmet food. In the food industry, different packaging methods have been used for shelf-life extension, but it is important to know how the quality of minimally processed vegetable is affected by these treatments. Recently, nitrogen and argon have been used for food packaging. Nitrogen is low soluble in water and other food constituents and does not support the growth of aerobic microbes. In turn, argon is biochemically active and appears to interfere with enzymatic oxygen receptor sites. In this study, modified atmospheres enriched with nitrogen and argon were evaluated for shelf-life extension of buckler sorrel leaves. Wild samples were gathered in Bragança, Portugal, considering local consumers’ sites and criteria. Healthy and undamaged leaves were selected, rinsed in tap water, and a portion was immediately analyzed (non-stored control). The remaining fresh material was packaged in polyethylene bags under nitrogen- and argon-enriched atmospheres and a conventional control atmosphere (air). All packaged samples were stored at 4 ºC for 12 days and then analyzed. The headspace gas composition was monitored during storage. Different quality attributes were evaluated, including visual (colour), nutritional (macronutrients, individual sugars and fatty acids) and bioactive (hydrophilic and lipophilic molecules and antioxidant properties) parameters. Different statistical tools were used; the one-way analysis of variance (ANO VA) was applied for analyse the differences among treatments and a linear discriminant analysis (LDA ) was used to evaluate the effects on the overall postharvest quality. The argon-enriched atmosphere better prevent the samples yellowing. The proximate composition did not change significantly during storage. Samples in control atmosphere revealed higher protein and ash contents and lower levels of lipids. The non-stored control samples presented the higher amounts of fructose, glucose and trehalose. The storage time increased the palmitic acid levels and decreased the content in α-linolenic and linoleic acids. The γ- e δ-tocopherols were higher after the 12 days of cold storage. Probably, the synthesis of these lipophilic compounds was a plant strategy to fight against the abiotic stress induced by storage. Higher levels of total phenolics and flavonoids and increased reducing power and β-carotene bleaching inhibition capacity were also found in the stored control samples. Once again, this result may be attributed to the intrinsic plant-protection mechanisms. Overall, the argon atmosphere was more suitable for quality preservation and shelf-life extension of buckler sorrel.

Foeniculum vulgare Mill. as a natural ingredient to improve cottage cheese antioxidant properties

Food industry is focused on the development of novel functional foods containing health promoting natural ingredients. Natural antioxidants present important health benefits like the prevention of several diseases related to oxidative stress [1,2]. Foeniculum vulgare Mill. (fennel) is a source of those compounds with proved antioxidant potential [3]. Herein, after evaluation of 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity and reducing power of fennel (provided by Américo Duarte Paixão Lda.) decoction, we propose its incorporation into cottage cheese (produced by Queijos Casa Matias Lda.). Three groups of cottage cheese samples were prepared: control; samples with fennel decoction (incorporated at EC25 value=0.35 mg/mL, previously determined by DPPH assay); and samples with fennel powder (incorporated at 1.75 mg/mL, considering the decoction yield=20%). The samples were submitted to an evaluation of DPPH scavenging activity and reducing power immediately after the incorporations, and after 7 and 14 days of storage, at 4 ºC. The incorporation of fennel improved the antioxidant activity of cottage cheese. Samples incorporated with plant powder revealed higher antioxidant properties than samples incorporated with decoction, either in 0 or 7 days of storage. After 14 days, cottage cheese incorporated with fennel decoction gave the highest DPPH scavenging activity (46.72±0.09 mg/mL). A decrease in the antioxidant potential of the cottage cheese with fennel was observed along the shelf life. Nevertheless, it is important to highlight that the samples still display antioxidant properties. Studies regarding the effects of the incorporation of these natural ingredients on nutritional and chemical composition of cottage cheese are in course

Development of Imaging Mass Spectrometry Analysis of Lipids in Biological and Clinically Relevant Applications

La spectrométrie de masse mesure la masse des ions selon leur rapport masse sur charge. Cette technique est employée dans plusieurs domaines et peut analyser des mélanges complexes. L’imagerie par spectrométrie de masse (Imaging Mass Spectrometry en anglais, IMS), une branche de la spectrométrie de masse, permet l’analyse des ions sur une surface, tout en conservant l’organisation spatiale des ions détectés. Jusqu’à présent, les échantillons les plus étudiés en IMS sont des sections tissulaires végétales ou animales. Parmi les molécules couramment analysées par l’IMS, les lipides ont suscité beaucoup d'intérêt. Les lipides sont impliqués dans les maladies et le fonctionnement normal des cellules; ils forment la membrane cellulaire et ont plusieurs rôles, comme celui de réguler des événements cellulaires. Considérant l’implication des lipides dans la biologie et la capacité du MALDI IMS à les analyser, nous avons développé des stratégies analytiques pour la manipulation des échantillons et l’analyse de larges ensembles de données lipidiques. La dégradation des lipides est très importante dans l’industrie alimentaire. De la même façon, les lipides des sections tissulaires risquent de se dégrader. Leurs produits de dégradation peuvent donc introduire des artefacts dans l’analyse IMS ainsi que la perte d’espèces lipidiques pouvant nuire à la précision des mesures d’abondance. Puisque les lipides oxydés sont aussi des médiateurs importants dans le développement de plusieurs maladies, leur réelle préservation devient donc critique. Dans les études multi-institutionnelles où les échantillons sont souvent transportés d’un emplacement à l’autre, des protocoles adaptés et validés, et des mesures de dégradation sont nécessaires. Nos principaux résultats sont les suivants : un accroissement en fonction du temps des phospholipides oxydés et des lysophospholipides dans des conditions ambiantes, une diminution de la présence des lipides ayant des acides gras insaturés et un effet inhibitoire sur ses phénomènes de la conservation des sections au froid sous N2. A température et atmosphère ambiantes, les phospholipides sont oxydés sur une échelle de temps typique d’une préparation IMS normale (~30 minutes). Les phospholipides sont aussi décomposés en lysophospholipides sur une échelle de temps de plusieurs jours. La validation d’une méthode de manipulation d’échantillon est d’autant plus importante lorsqu’il s’agit d’analyser un plus grand nombre d’échantillons. L’athérosclérose est une maladie cardiovasculaire induite par l’accumulation de matériel cellulaire sur la paroi artérielle. Puisque l’athérosclérose est un phénomène en trois dimension (3D), l'IMS 3D en série devient donc utile, d'une part, car elle a la capacité à localiser les molécules sur la longueur totale d’une plaque athéromateuse et, d'autre part, car elle peut identifier des mécanismes moléculaires du développement ou de la rupture des plaques. l'IMS 3D en série fait face à certains défis spécifiques, dont beaucoup se rapportent simplement à la reconstruction en 3D et à l’interprétation de la reconstruction moléculaire en temps réel. En tenant compte de ces objectifs et en utilisant l’IMS des lipides pour l’étude des plaques d’athérosclérose d’une carotide humaine et d’un modèle murin d’athérosclérose, nous avons élaboré des méthodes «open-source» pour la reconstruction des données de l’IMS en 3D. Notre méthodologie fournit un moyen d’obtenir des visualisations de haute qualité et démontre une stratégie pour l’interprétation rapide des données de l’IMS 3D par la segmentation multivariée. L’analyse d’aortes d’un modèle murin a été le point de départ pour le développement des méthodes car ce sont des échantillons mieux contrôlés. En corrélant les données acquises en mode d’ionisation positive et négative, l’IMS en 3D a permis de démontrer une accumulation des phospholipides dans les sinus aortiques. De plus, l’IMS par AgLDI a mis en évidence une localisation différentielle des acides gras libres, du cholestérol, des esters du cholestérol et des triglycérides. La segmentation multivariée des signaux lipidiques suite à l’analyse par IMS d’une carotide humaine démontre une histologie moléculaire corrélée avec le degré de sténose de l’artère. Ces recherches aident à mieux comprendre la complexité biologique de l’athérosclérose et peuvent possiblement prédire le développement de certains cas cliniques. La métastase au foie du cancer colorectal (Colorectal cancer liver metastasis en anglais, CRCLM) est la maladie métastatique du cancer colorectal primaire, un des cancers le plus fréquent au monde. L’évaluation et le pronostic des tumeurs CRCLM sont effectués avec l’histopathologie avec une marge d’erreur. Nous avons utilisé l’IMS des lipides pour identifier les compartiments histologiques du CRCLM et extraire leurs signatures lipidiques. En exploitant ces signatures moléculaires, nous avons pu déterminer un score histopathologique quantitatif et objectif et qui corrèle avec le pronostic. De plus, par la dissection des signatures lipidiques, nous avons identifié des espèces lipidiques individuelles qui sont discriminants des différentes histologies du CRCLM et qui peuvent potentiellement être utilisées comme des biomarqueurs pour la détermination de la réponse à la thérapie. Plus spécifiquement, nous avons trouvé une série de plasmalogènes et sphingolipides qui permettent de distinguer deux différents types de nécrose (infarct-like necrosis et usual necrosis en anglais, ILN et UN, respectivement). L’ILN est associé avec la réponse aux traitements chimiothérapiques, alors que l’UN est associé au fonctionnement normal de la tumeur.

Small and medium enterprise competitiveness: Internationalization strategy

Field lab: SME competitiveness

ENHANCEMENT OF THERMAL INACTIVATION OF CRONOBACTER SAKAZAKII WITH INCLUSION OF PARABENS

Parabens are a family of p-hydroxybenzoic acid esters, which have antimicrobial activity over a broad pH range (4-8). This study was designed to evaluate the enhanced thermal inactivation of Cronobacter sakazakii by the inclusion of “parabens” and to ultimately develop mathematical models to describe this effect. A heat-resistant strain, Cronobacter sakazakii 607, was heated at three mild heating temperatures in combination with treatments with five parabens in various concentrations. Results showed the presence of parabens significantly enhanced thermal inactivation in a concentration-dependent manner, and the effect increased with increasing alkyl chain length. The concentration of parabens, alkyl side chain length, and heating temperature acted synergistically, causing bacterial inactivation even at low temperatures that were not effective in killing C. sakazakii. The survival data were used to develop primary and secondary mathematical models that accurately describe how this synergistic activity can be applied in the food industry.

Bioprospection of Petit Verdot grape pomace as a source of anti-inflammatory compounds.

The aim of this study was to evaluate the anti-inflammatory activity of Petit Verdot Extract and hexane, chloroform and ethyl acetate fractions obtained from grape pomace, in addition to identifying active compounds. The PVE and EAF reduced significantly paw edema and neutrophil migration when compared with control groups. The PVE reduced levels of TNF-α and IL1-β in the peritoneal fluid, whereas the EAF did not reduce cytokines significantly. Two hydroxybenzoic acids, two proanthocyanidins, three flavan-3-ol monomers and three anthocyanins were identified in the PVE and EAF by LC-MS/MS. The stilbene transresveratrol was identified only in the EAF. The phenolic compounds were quantified using HPLC-DAD analysis, except for the stilbenes, which were not sensible for the detection by the method. Since PVE and EAF showed significantly anti-inflammatory effects and high concentration of phenolic compounds, we concluded that Petit Verdot pomace could be an interesting source of anti-inflammatory bioactives.

Síntomas y factores ergonómicos asociados con trastornos musculoesqueléticos (TME) en una población de trabajadores administrativos de una empresa de servicios, 2015

Introducción. Los Trastornos Musculoesqueléticos (TME) son lesiones de músculos, tendones, nervios y articulaciones que tienen como principal síntoma el dolor y se presentan con gran frecuencia en trabajos que requieren una actividad física importante o como consecuencia de malas posturas sostenidas durante largos periodos de tiempo. Objetivo: Determinar la prevalencia de síntomas osteomusculares y su asociación con factores ergonómicos en una población de trabajadores administrativos de una empresa de servicios en Bogotá, Colombia, en el año 2015. Método: Se realizó un estudio de corte transversal. Se analizaron datos secundarios correspondientes a una base de datos de una población de 450 trabajadores pertenecientes al área administrativa de una empresa de servicios, de los cuales se incluyeron 150 registros que tenían la información completa de las variables del estudio. Se tuvieron en cuenta variables sociodemográficas, ocupacionales y la presencia de síntomas osteomusculares. Incluyó también el registro de condiciones de la estación de trabajo recolectada mediante inspecciones de puestos de trabajo (registro fotográfico y formato estandarizado para condiciones observadas). Se realizó un análisis descriptivo considerando las medidas de tendencia central para las variables cuantitativas y distribución de frecuencias para las variables cualitativas. Resultados: Predominó el género femenino (56%) dentro de la población estudiada, con una edad media para ambos géneros de 35 años (75%), (DS ± 7.0). El síntoma más frecuentemente reportado fue el dolor en cuello (17%) seguido por dolor en muñeca (11%) y dolor lumbar (8.7%). Del total de los trabajadores evaluados, el 80% correspondió al cargo ejecutivo, que reúne funciones administrativas especializadas complejas y/o de supervisión directa. De la población femenina objeto de estudio el 76% se desempeñaban en el cargo ejecutivo. Las condiciones ergonómicas por mejorar de mayor frecuencia fueron altura y distancia de la pantalla (42%) y cables sueltos (30%). La frecuencia de síntomas fue más alta en el rango de edad de 31 a 45 años. Conclusiones: En este estudio se encontró que los síntomas osteomusculares más frecuentes se ubicaron en el segmento axial (cuello y región lumbar) y en mano y que las condiciones de altura y distancia de la pantalla y cables sueltos presentaron las frecuencias más altas de condiciones por mejorar. Se hace necesaria la implementación de programas de prevención de TME, la vigilancia de casos y la intervención de las condiciones de los puestos de trabajo. Se debe promover la identificación y promoción de conductas saludables dentro del ámbito laboral y la prevención de condiciones que favorezcan la aparición del riesgo biomecánico.

Prevalencia y factores asociados al consumo de bebidas azucaradas en escolares de 9 a 17 años de Bogotá, Colombia: Estudio FUPRECOL

Objetivo: Determinar la prevalencia y los factores asociados al consumo de bebidas azucaradas en una población escolar de Bogotá, Colombia, pertenecientes al estudio FUPRECOL. Métodos: Estudio descriptivo y transversal, realizado en 8136 niños y adolescentes en edad escolar entre 9 y 17 años de Bogotá, Colombia. El peso, la estatura, el índice de masa corporal (IMC), la circunferencia de cintura y el porcentaje de grasa, se recogieron como marcadores antropométricos y de composición corporal. El consumo de bebidas azucaradas (bebidas carbonatadas, jugos ultra-procesados y/o Té), y los factores asociados (sexo, edad, obesidad abdominal, clasificación del IMC, grado de estudios de la madre/padre, y nivel nutricional por cuestionario “Krece plus”), se recogieron por encuesta estructurada. Se establecieron asociaciones mediante la construcción de modelos de regresión logística simple. Resultados: De la población general, el 58,4% eran mujeres. En función al sexo, los varones acusaron la mayor ingesta de “bebidas carbonatadas” con una frecuencia semanal y diaria de 70,9% y 21,0%, respectivamente, seguido de “jugos ultra- procesados” (64,4% semanal vs. 11,3% diario). En ambos sexos, la prevalencia de obesidad abdominal fue mayor en los escolares que respondieron consumir diariamente “bebidas carbonatadas” (23,3%), “jugos ultra-procesados” (13,2%) y “bebidas Té” (9,7%). La edad, el grado de educación de los padres y el nivel nutricional, se asociaron como factores predisponentes al consumo diario de “bebidas carbonatadas”. Conclusión: El consumo de bebidas azucaradas cambia por los factores analizados. Se recomiendan intervenciones integrales en las que estén involucrados los componentes nutricional y educativo entre los niños y adolescentes de Bogotá, Colombia.

Enterprise longevity in Colombian companies From a perspective of innovation and corporate social responsibility as a strategy

Hoy en día la Innovación y la Responsabilidad Social Empresarial son una herramienta clave para la perdurabilidad de una empresa a través del tiempo. Este es el caso de las organizaciones colombianas donde las decisiones de gerencia son enfocadas en el desarrollo de plataformas que soportan practicas sociales y éticas ya que estas incentivan a los trabajadores ofreciéndoles a sus clientes un mejor servicio y son necesarias para generar una estrategia de reputación, ganar fidelidad y credibilidad por parte de los consumidores. Crepes & Waffles es uno de los restaurantes colombianos más exitosos y que ha logrado mantenerse en el tiempo aún así en tiempos turbulentos. Su éxito se debe al uso de RSE en su estrategia, ellos crean innovación de valor en cada uno de sus platos al hacerlos diferentes, en el servicio al cliente y en los servicios y el buen trato que se le ofrece a los trabajadores. Por otro lado, Procolombia es una organización que promueve las exportaciones no tradicionales, la inversión extranjera y la marca país. Ellos al igual que Crepes & Waffles también se enfocan en la RSE y crea innovación de valor en sus procesos de orientar a las empresas a través de conferencias, seminarios, entrenamientos entre otras.

Improvements in sustainable energy and water practice in the food processing industry : an in depth analysis of the manufacture of Ghee at the Butter Producers' Cooperative Federation Limited, Brisbane

This thesis is a documented energy audit and long term study of energy and water reduction in a ghee factory. Global production of ghee exceeds 4 million tonnes annually. The factory in this study refines dairy products by non-traditional centrifugal separation and produces 99.9% pure, canned, crystallised Anhydrous Milk Fat (Ghee). Ghee is traditionally made by batch processing methods. The traditional method is less efficient, than centrifugal separation. An in depth systematic investigation was conducted of each item of major equipment including; ammonia refrigeration, a steam boiler, canning equipment, pumps, heat exchangers and compressed air were all fine-tuned. Continuous monitoring of electrical usage showed that not every initiative worked, others had pay back periods of less than a year. In 1994-95 energy consumption was 6,582GJ and in 2003-04 it was 5,552GJ down 16% for a similar output. A significant reduction in water usage was achieved by reducing the airflow in the refrigeration evaporative condensers to match the refrigeration load. Water usage has fallen 68% from18ML in 1994-95 to 5.78ML in 2003-04. The methods reported in this thesis could be applied to other industries, which have similar equipment, and other ghee manufacturers.

Explaining internationalisation of small to medium sized enterprises within the Queensland food and beverage industry

The prevalence of International New Ventures (INVs) has increased during the past twenty years. Nevertheless, to date there has been no general consensus within the literature on an explanation as to the rapid internationalisation of some firms. Do they follow a similar process to other firms that internationalise based on a more ‘measured’ incremental sequential process of internationalisation. This paper proposes and tests an innovation diffusion model of the internationalisation of small firm INVs and others by drawing on key innovation diffusion models from the literature. The results of this analysis indicate that the synthesised model of export adoption is effective in explaining the internationalisation process of INVs and other firms within the Queensland Food and Beverage Industry. Significantly, the features of the original innovation diffusion models developed in the consumer behaviour literature, which had limited examination within the internationalisation literature, were confirmed. This includes the ability of firms, or specifically decision-makers, to skip stages based on previous experience.