Mathematical model for manoeuvrability of a riverine support patrol vessel with a pump-jet propulsion system

A study on the manoeuvrability of a riverine support patrol vessel is made to derive a mathematical model and simulate maneuvers with this ship. The vessel is mainly characterized by both its wide-beam and the unconventional propulsion system, that is, a pump-jet type azimuthal propulsion. By processing experimental data and the ship characteristics with diverse formulae to find the proper hydrodynamic coefficients and propulsion forces, a system of three differential equations is completed and tuned to carry out simulations of the turning test. The simulation is able to accept variable speed, jet angle and water depth as input parameters and its output consists of time series of the state variables and a plot of the simulated path and heading of the ship during the maneuver. Thanks to the data of full-scale trials previously performed with the studied vessel, a process of validation was made, which shows a good fit between simulated and full-scale experimental results, especially on the turning diameter

Electric current of an electrified jet issuing from a long metallic tube.

This paper presents an analysis of the transport of electric current in a jet of an electrically conducting liquid discharging from a metallic tube into a gas or a vacuum, and subject to an electric field due to a high voltage applied between the tube and a far electrode. The flow, the surface charge and the electric field are computed in the current transfer region of the jet, where conduction current in the liquid becomes surface current due to the convection of electric charge accumulated at its surface. The electric current computed as a function of the flow rate of the liquid injected through the tube increases first as the square root of this flow rate, levels to a nearly constant value when the flow rate is increased and finally sets to a linear increase when the flow rate is further increased. The current increases linearly with the applied voltage at small and moderate values of this variable, and faster than linearly at high voltages. The characteristic length and structure of the current transfer region are determined. Order-of-magnitude estimates for jets which are only weakly stretched by the electric stresses are worked out that qualitatively account for some of the numerical results.

Development of a grid connected micro wind generator. A practical activity for the course on electric generation with wind energy

This paper describes a practical activity, part of the renewable energy course where the students have to build their own complete wind generation system, including blades, PM-generator, power electronics and control. After connecting the system to the electric grid the system has been tested during real wind scenarios. The paper will describe the electric part of the work surface-mounted permanent magnet machine design criteria as well as the power electronics part for the power control and the grid connection. A Kalman filter is used for the voltage phase estimation and current commands obtained in order to control active and reactive power. The connection to the grid has been done and active and reactive power has been measured in the system.

Viability study of sailing propulsion combined with a conventional system

For many years now, sails have been used as a propulsion system. At present, they are restricted to recreational/sport crafts since the appearance of the first steam vessels in the beginning of the 19 th century. But in the last years, due to the increase of fuel price and the pollution of the environment, it is being studied the possibility to introduce again the sail as a propulsive method combined with other conventional systems. In this paper, it is studied the viability of using a sail as a propellant with other conventional systems of propulsion. After considering the concept of apparent wind, the range of use of this complementary propulsion is presented. The calculation methodology, the numerical simulations and the wind inputs from a specific route are also included.

Eliminacion de dioxido de carbono en la propulsion de submarinos

Una planta AIP es cualquier sistema propulsivo capaz de posibilitar la navegación de un vehículo submarino bajo la superficie del mar de forma completamente independiente de la atmósfera terrestre. El uso a bordo de submarinos de plantas AIP basadas en la reacción química entre un hidrocarburo y oxígeno (ambos almacenados en el interior del submarino) da lugar a la producción en grandes cantidades de agua y CO2, residuos que necesitan ser eliminados. En concreto, la producción de CO2 en grandes cantidades (y en estado gaseoso) constituye un auténtico problema en un submarino navegando en inmersión, ya que actualmente no resulta viable almacenarlo a bordo, y su eliminación tiene que llevarse a cabo de forma discreta y con un coste energético reducido. Actualmente, hay varias alternativas para eliminar el CO2 producido en la propulsión de un submarino navegando en inmersión, siendo la más ventajosa la disolución de dicha sustancia en agua de mar y su posterior expulsión al exterior del submarino. Esta alternativa consta básicamente de 3 etapas bien definidas: • Etapa 1.- Introducir agua de mar a bordo del submarino, haciendo bajar su presión desde la existente en el exterior hasta la presión a la que se quiere realizar el proceso de disolución. • Etapa 2.- Llevar a cabo el proceso de disolución a presión constante e independiente de la existente en el exterior del submarino. • Etapa 3.- Expulsar fuera del submarino el agua de mar saturada de CO2 haciendo subir su presión desde la correspondiente al proceso de disolución hasta la existente en el exterior. Para ejecutar las etapas 1 y 3 con un coste energético aceptable, resulta necesaria la instalación de un sistema de recuperación de energía, el cual basa su funcionamiento en aprovechar la energía producida en la caída de presión del flujo de agua entrante para elevar la presión del flujo de agua saliente saturada de CO2. El sistema arriba citado puede implementarse de 3 formas alternativas: • Recuperación de doble salto mediante máquinas hidráulicas de desplazamiento positivo. • Recuperación directa mediante cilindros estacionarios dotados de pistones internos. • Recuperación directa mediante cilindros rotativos sin pistones internos. Por otro lado, para ejecutar la etapa 2 de forma silenciosa, y sin ocupar excesivo volumen, resulta necesaria la instalación de un sistema de disolución de CO2 en agua de mar a baja presión, existiendo actualmente 2 principios funcionales viables: • Dispersión de finas burbujas de gas en el seno de una masa de agua. • Difusión directa de CO2 a través de una inter-fase líquido/gas estable sin procesos de dispersión previos. Una vez dicho todo esto, el objetivo de la tesis consiste en llevar a cabo dos estudios comparativos: uno para analizar las ventajas/inconvenientes que presentan las 3 alternativas de recuperación de energía citadas y otro para analizar las ventajas/inconvenientes que presentan los sistemas de disolución de CO2 en agua de mar basados en los 2 principios funcionales mencionados. En ambos estudios se van a tener en cuenta las singularidades propias de una instalación a bordo de submarinos. Para finalizar este resumen, cabe decir que la ejecución de los estudios arriba citados ha exigido el desarrollo de un código software específico (no disponible en la bibliografía) para llevar a cabo la simulación numérica de los distintos sistemas presentados en la tesis. Este código software se ha desarrollado bajo una serie de restricciones importantes, las cuales se listan a continuación: • Ha sido necesario tener en cuenta fluidos de trabajo multi-componente: agua de mar con CO2 disuelto. • El fluido de trabajo se encuentra normalmente en estado líquido, habiendo sido necesario considerar fenómenos de cambio de fase únicamente en etapas incipientes. • La algoritmia se ha diseñado de la forma más simple posible, al objeto de facilitar el subsiguiente proceso de programación y reducir al máximo el tiempo de ejecución en máquina. • La algoritmia arriba citada se ha diseñado para llevar a cabo análisis de tipo comparativo solamente, y no para obtener resultados extremadamente precisos en términos absolutos.

Energy Analysis of Bare Electrodynamic Tethers

The design of an electrodynamic tether is a complex task that involves the control of dynamic instabilities, optimization of the generated power (or the descent time in deorbiting missions), and minimization of the tether mass. The electrodynamic forces on an electrodynamic tether are responsible for variations in the mechanical energy of the tethered system and can also drive the system to dynamic instability. Energy sources and sinks in this system include the following: 1) ionospheric impedance, 2) the potential drop at the cathodic contactor, 3) ohmic losses in the tether, 4) the corotational plasma electric field, and 5) generated power and/or 6) input power. The analysis of each of these energy components, or bricks, establishes parameters that are useful tools for tether design. In this study, the nondimensional parameters that govern the orbital energy variation, dynamic instability, and power generation were characterized, and their mutual interdependence was established. A space-debris mitigation mission was taken as an example of this approach for the assessment of tether performance. Numerical simulations using a dumbbell model for tether dynamics, the International Geomagnetic Reference Field for the geomagnetic field, and the International Reference Ionosphere for the ionosphere were performed to test the analytical approach. The results obtained herein stress the close relationships that exist among the velocity of descent, dynamic stability, and generated power. An optimal tether design requires a detailed tradeoff among these performances in a real-world scenario.

EU-CargoXpress: wind propulsion concept

The EU-CargoXpress project suggests the usage of sustainable energies to reduce the fuel consumption. The updated concept consists of hoisting the superstructure and using it as a sail together with the conventional propulsion. This paper presents the study of the sail performance by means of a computational analysis and wind tunnel tests. Moreover, a research of the energy saving in different operational areas has been conducted. It is concluded that there is a significant energy saving by using the superstructure as a sail which leads to a reduction of fossil fuel consumption and consequently, a reduction of greenhouse gas emissions.

Organisational learning, strategic rigidity and technology adoption: Implications for electric utilities and renewable energy firms

This paper examines the implications of strategic rigidness for technology adoption behaviours among electric utilities. Such behaviours lead to heterogeneity in firm performance and consequently affect the electric utility industry. The paper's central aim is to identify and describe the implications of strategic rigidness for a utility firm's decision making in adopting newer renewable energy technologies. The findings indicate that not all utility firms are keen to adopt these new technologies, as these firms have traditionally been operating efficiently with a more conventional and mature technological arrangement that has become embedded in the organisational routine. Case studies of Iberdrola S.A. and Enel S.p.A. as major electric utilities are detailed to document mergers and acquisitions and technology adoption decisions. The results indicate that technology adoption behaviours vary widely across utility firms with different organisational learning processes and core capabilities.

Choked flow in water/CO2 solutions on air-independent propulsion systems

We develop a simplified model of choked flow in pipes for CO2-water solutions as an important step in the modelling of a whole hydraulic system with the intention of eliminating the carbon dioxide generated in air-independent submarine propulsion. The model is based on an approximate fitting of the homogeneous isentropic solution upstream of a valve (or any other area restriction), for given fluid conditions at the entrance. The relative maximum choking back-pressure is computed as a function of area restriction ratio. Although the procedure is generic for gas solutions, numeric values for the non-dimensional parameters in the analysis are developed only for choking in the case of carbon dioxide solutions up to the pure-water limit.

Ion correlations due to high-frequency electric field and their effect on the nonlinear plasma conductivity

The influence of a strong, high‐frequency electric field on the ion‐ion correlations in a fully ionized plasma is investigated in the limit of infinite ion mass, starting with the Bogoliubov‐Born‐Green‐Kirkwood‐Yvon hierarchy of equations; a significant departure from the thermal correlations is found. It is shown that the above effect may substantially modify earlier results on the nonlinear high‐frequency plasma conductivity.

Electrostatic plasma instabilities excited by a high‐frequency electric field

The electrostatic plasma waves excited by a uniform, alternating electric field of arbitrary intensity are studied on the basis of the Vlasov equation; their dispersion relation, which involves the determinant of either of two infinite matrices, is derived. For ω0 ≫ ωpi (ω0 being the applied frequency and ωpi the ion plasma frequency) the waves may be classified in two groups, each satisfying a simple condition; this allows writing the dispersion relation in closed form. Both groups coalesce (resonance) if (a) ω0  ≈  ωpe/r (r any integer) and (b) the wavenumber k is small. A nonoscillatory instability is found; its distinction from the DuBois‐Goldman instability and its physical origin are discussed. Conditions for its excitation (in particular, upper limits to ω0,k, and k⋅vE,vE being the field‐induced electron velocity), and simple equations for the growth rate are given off‐resonance and at ω0  ≈  ωpi. The dependence of both threshold and maximum growth rate on various parameters is discussed, and the results are compared with those of Silin and Nishikawa. The threshold at ω0  ≈  ωpi/r,r  ≠  1, is studied.

Finite Element Analysis Model of a Contactless Transformer for Battery Chargers in Electric Vehicles

A contactless transformer model is proposed in this paper using Finite Element Analysis (FEA). This model can be used to simulate Inductive Coupling Power Transfer (ICPT) systems with good accuracy of the transformer and reduce the fabrication time of these systems. The model not only takes into account the geometry of the windings but also the frequency effects in them. As the transformer does not have a magnetic core, it is complicated to model because the flux is expanded in the area around the windings. In order to obtain a very accurate model, it is necessary to use a 2D/3D field solver.

Mechanical actuator for biomimetic propulsion and the effect of the caudal fin elasticity on the swimming performance

This paper presents a mechanical actuator for the biomimetic propulsion of swimming devices and the experimental study of the effect of the caudal fin elasticity on the overall performance. The design of the proposed drive allows the DC motor to operate at constant speed, so all the power of the motor is spent only for the motion of the caudal fin. A prototype of the actuator, in which the caudal fin serves as a driving element, is manufactured and tested in both laboratory and natural conditions. The swimming speed, the thrust efficiency and the maneuverability are evaluated for caudal fins with different stiffness. The caudal fin whose rigidity varies relative to both vertical and horizontal cross-section, exhibits the best performance. The achieved results also confirm that the proposed actuator could be of great interest to applications in the field of underwater operation, ocean investigation and environmental protection.