Studies on Advanced Oxidation Processes for the Removal of Acetamiprid from Wastewater

Pollution of water with pesticides has become a threat to the man, material and environment. The pesticides released to the environment reach the water bodies through run off. Industrial wastewater from pesticide manufacturing industries contains pesticides at higher concentration and hence a major source of water pollution. Pesticides create a lot of health and environmental hazards which include diseases like cancer, liver and kidney disorders, reproductive disorders, fatal death, birth defects etc. Conventional wastewater treatment plants based on biological treatment are not efficient to remove these compounds to the desired level. Most of the pesticides are phyto-toxic i.e., they kill the microorganism responsible for the degradation and are recalcitrant in nature. Advanced oxidation process (AOP) is a class of oxidation techniques where hydroxyl radicals are employed for oxidation of pollutants. AOPs have the ability to totally mineralise the organic pollutants to CO2 and water. Different methods are employed for the generation of hydroxyl radicals in AOP systems. Acetamiprid is a neonicotinoid insecticide widely used to control sucking type insects on crops such as leafy vegetables, citrus fruits, pome fruits, grapes, cotton, ornamental flowers. It is now recommended as a substitute for organophosphorous pesticides. Since its use is increasing, its presence is increasingly found in the environment. It has high water solubility and is not easily biodegradable. It has the potential to pollute surface and ground waters. Here, the use of AOPs for the removal of acetamiprid from wastewater has been investigated. Five methods were selected for the study based on literature survey and preliminary experiments conducted. Fenton process, UV treatment, UV/ H2O2 process, photo-Fenton and photocatalysis using TiO2 were selected for study. Undoped TiO2 and TiO2 doped with Cu and Fe were prepared by sol-gel method. Characterisation of the prepared catalysts was done by X-ray diffraction, scanning electron microscope, differential thermal analysis and thermogravimetric analysis. Influence of major operating parameters on the removal of acetamiprid has been investigated. All the experiments were designed using central compoiste design (CCD) of response surface methodology (RSM). Model equations were developed for Fenton, UV/ H2O2, photo-Fenton and photocatalysis for predicting acetamiprid removal and total organic carbon (TOC) removal for different operating conditions. Quality of the models were analysed by statistical methods. Experimental validations were also done to confirm the quality of the models. Optimum conditions obtained by experiment were verified with that obtained using response optimiser. Fenton Process is the simplest and oldest AOP where hydrogen peroxide and iron are employed for the generation of hydroxyl radicals. Influence of H2O2 and Fe2+ on the acetamiprid removal and TOC removal by Fenton process were investigated and it was found that removal increases with increase in H2O2 and Fe2+ concentration. At an initial concentration of 50 mg/L acetamiprid, 200 mg/L H2O2 and 20 mg/L Fe2+ at pH 3 was found to be optimum for acetamiprid removal. For UV treatment effect of pH was studied and it was found that pH has not much effect on the removal rate. Addition of H2O2 to UV process increased the removal rate because of the hydroxyl radical formation due to photolyis of H2O2. An H2O2 concentration of 110 mg/L at pH 6 was found to be optimum for acetamiprid removal. With photo-Fenton drastic reduction in the treatment time was observed with 10 times reduction in the amount of reagents required. H2O2 concentration of 20 mg/L and Fe2+ concentration of 2 mg/L was found to be optimum at pH 3. With TiO2 photocatalysis improvement in the removal rate was noticed compared to UV treatment. Effect of Cu and Fe doping on the photocatalytic activity under UV light was studied and it was observed that Cu doping enhanced the removal rate slightly while Fe doping has decreased the removal rate. Maximum acetamiprid removal was observed for an optimum catalyst loading of 1000 mg/L and Cu concentration of 1 wt%. It was noticed that mineralisation efficiency of the processes is low compared to acetamiprid removal efficiency. This may be due to the presence of stable intermediate compounds formed during degradation Kinetic studies were conducted for all the treatment processes and it was found that all processes follow pseudo-first order kinetics. Kinetic constants were found out from the experimental data for all the processes and half lives were calculated. The rate of reaction was in the order, photo- Fenton>UV/ H2O2>Fenton> TiO2 photocatalysis>UV. Operating cost was calculated for the processes and it was found that photo-Fenton removes the acetamiprid at lowest operating cost in lesser time. A kinetic model was developed for photo-Fenton process using the elementary reaction data and mass balance equations for the species involved in the process. Variation of acetamiprid concentration with time for different H2O2 and Fe2+ concentration at pH 3 can be found out using this model. The model was validated by comparing the simulated concentration profiles with that obtained from experiments. This study established the viability of the selected AOPs for the removal of acetamiprid from wastewater. Of the studied AOPs photo- Fenton gives the highest removal efficiency with lowest operating cost within shortest time.

Advanced Nuclear Energy Systems: Heat Transfer Issues and Trends

Almost 450 nuclear power plants are currently operating throughout the world and supplying about 17% of the world’s electricity. These plants perform safely, reliably, and have no free-release of byproducts to the environment. Given the current rate of growth in electricity demand and the ever growing concerns for the environment, the US consumer will favor energy sources that can satisfy the need for electricity and other energy-intensive products (1) on a sustainable basis with minimal environmental impact, (2) with enhanced reliability and safety and (3) competitive economics. Given that advances are made to fully apply the potential benefits of nuclear energy systems, the next generation of nuclear systems can provide a vital part of a long-term, diversified energy supply. The Department of Energy has begun research on such a new generation of nuclear energy systems that can be made available to the market by 2030 or earlier, and that can offer significant advances toward these challenging goals [1]. These future nuclear power systems will require advances in materials, reactor physics as well as heat transfer to realize their full potential. In this paper, a summary of these advanced nuclear power systems is presented along with a short synopsis of the important heat transfer issues. Given the nature of research and the dynamics of these conceptual designs, key aspects of the physics will be provided, with details left for the presentation.

An ATM distributed simulator for network management research

Due to the high cost of a large ATM network working up to full strength to apply our ideas about network management, i.e., dynamic virtual path (VP) management and fault restoration, we developed a distributed simulation platform for performing our experiments. This platform also had to be capable of other sorts of tests, such as connection admission control (CAC) algorithms, routing algorithms, and accounting and charging methods. The platform was posed as a very simple, event-oriented and scalable simulation. The main goal was the simulation of a working ATM backbone network with a potentially large number of nodes (hundreds). As research into control algorithms and low-level, or rather cell-level methods, was beyond the scope of this study, the simulation took place at a connection level, i.e., there was no real traffic of cells. The simulated network behaved like a real network accepting and rejecting SNMP ones, or experimental tools using the API node

Neptune: a hil simulator for multiple UUVs

This paper overviews the field of graphical simulators used for AUV development, presents the taxonomy of these applications and proposes a classification. It also presents Neptune, a multivehicle, real-time, graphical simulator based on OpenGL that allows hardware in the loop simulations

Advanced Calculus

Exercises and solutions for a third year calculus course. Diagrams for the questions are all together in the support.zip file, as .eps files

Advanced Reference Manager Session

This is based on a training session last delivered in summer 2013.

EndNote X6 - Advanced Guide

Detailed guidance in creating and managing a library, downloading information from a range of external resources, and use of advanced citation tools in Word, including synchronisation with EndNote Web for maximum flexibility of use

Endnote X7 - advanced guide 2014

A guide to the advanced features of EndNote, including advanced group structure, working with bibliographic templates, figures and tables, structuring bibliographies and working with PowerPoint.

Fatiga del reanimador y calidad de las compresiones torácicas en niños con y sin vía aérea asegurada

Introducción: La calidad de las compresiones torácicas tiene importancia durante la reanimación pediátrica y se ve afectada por diversos factores como la fatiga del reanimador, esta puede verse condicionada por las características de las compresiones establecidas según la presencia o ausencia de un dispositivo avanzado en la vía aérea determinando la interrupción continuidad de las mismas. En este estudio se realizó una simulación clínica, evaluando la presencia de fatiga del reanimador frente a pacientes con y sin dispositivo avanzado de la vía aérea. Metodología: Se incluyeron 12 participantes, quienes realizaron compresiones torácicas a un simulador clínico, tanto para el caso de la maniobra 1 correspondiente a ciclos interrumpidos con el fin de proporcionar ventilaciones, como para el caso de la maniobra 2 en la que la actividad fue continua. Se midieron calidad de compresiones, VO2 max y fatiga mediante escala de Borg RPE 6-20. Resultados: La calidad de las compresiones disminuyó en ambos grupos después del minuto 2 y más rápidamente cuando fueron ininterrumpidas. La fatiga se incrementó cuando las compresiones fueron continuas. Discusión: Se evidencia una relación directamente proporcional del aumento de la fatiga en relación al tiempo de reanimación e inversamente proporcional entre la calidad de las compresiones y la sensación de cansancio, en especial después del minuto 2. Un tiempo de 2 minutos podría ser el tiempo ideal para lograr compresiones de calidad y para realizar el reemplazo de la persona que realiza las compresiones.

Salters Horners Advanced Physics Project : un proyecto contextualizado para la enseñanza de la física.

resumen literal de la revista

Desarrollo de un curso de Biología contextualizado en el Bachillerato : el caso del proyecto Salters-Nuffield Advanced Biology.

Resumen tomado de la publicación

Advanced geography.

Diseñado para satisfacer las necesidades de las nuevas especificaciones del General Certificate of Education Advance level (AS y A2) de Geografía, resume los principales conceptos, procesos y problemas de la geografía que pueden ser utilizados para una revisión de la enseñanza. El texto se presenta en secciones para ayudar a los estudiantes a acceder fácilmente a la información. Dentro de cada una de ellas destacan:cirugías que explica los conceptos y las teorías difíciles; seminarios donde se examinan las cuestiones claves y las controversias Incluye estudios breves de casos y ejemplos, vitales para el éxito en el examen. Al final de cada unidad hay bibliografía recomendada y sitios web útiles para ampliar información. Tiene índice alfabético.