A study at high energy-resolution and at low primary energies of the secondary emission from (100) tungsten

This work was supported by the Joint Services Electronics Program (U.S. Army, U.S. Navy, and U.S. Air Force) under Contract No. DA 28 043 AMC 00073(E).

Optimization of flocculation process and continuous filtration for sea water primary treatment filtration to reduce SDI for entree to reverse osmosis system

Today , Providing drinking water and process water is one of the major problems in most countries ; the surface water often need to be treated to achieve necessary quality, and in this way, technological and also financial difficulties cause great restrictions in operating the treatment units. Although water supply by simple and cheap systems has been one of the important objectives in most scientific and research centers in the world, still a great percent of population in developing countries, especially in rural areas, don't benefit well quality water. One of the big and available sources for providing acceptable water is sea water. There are two ways to treat sea water first evaporation and second reverse osmosis system. Nowadays R.O system has been used for desalination because of low budget price and easily to operate and maintenance. The sea water should be pretreated before R.O plants, because there is some difficulties in raw sea water that can decrease yield point of membranes in R.O system. The subject of this research may be useful in this way, and we hope to be able to achieve complete success in design and construction of useful pretreatment systems for R.O plant. One of the most important units in the sea water pretreatment plant is filtration, the conventional method for filtration is pressurized sand filters, and the subject of this research is about new filtration which is called continuous back wash sand filtration (CBWSF). The CBWSF designed and tested in this research may be used more economically with less difficulty. It consists two main parts first shell body and second central part comprising of airlift pump, raw water feeding pipe, air supply hose, backwash chamber and sand washer as well as inlet and outlet connections. The CBWSF is a continuously operating filter, i.e. the filter does not have to be taken out of operation for backwashing or cleaning. Inlet water is fed through the sand bed while the sand bed is moving downwards. The water gets filtered while the sand becomes dirty. Simultaneously, the dirty sand is cleaned in the sand washer and the suspended solids are discharged in backwash water. We analyze the behavior of CBWSF in pretreatment of sea water instead of pressurized sand filter. There is one important factor which is not suitable for R.O membranes, it is bio-fouling. This factor is defined by Silt Density Index (SDI).measured by SDI. In this research has been focused on decreasing of SDI and NTU. Based on this goal, the prototype of pretreatment had been designed and manufactured to test. The system design was done mainly by using the design fundamentals of CBWSF. The automatic backwash sand filter can be used in small and also big water supply schemes. In big water treatment plants, the units of filters perform the filtration and backwash stages separately, and in small treatment plants, the unit is usually compacted to achieve less energy consumption. The analysis of the system showed that it may be used feasibly for water treating, especially for limited population. The construction is rapid, simple and economic, and its performance is high enough because no mobile mechanical part is used in it, so it may be proposed as an effective method to improve the water quality and consequently the hygiene level in the remote places of the country.

Embedding sustainability into the new computer science curriculum for English schools

The primary goals of this study are to: embed sustainable concepts of energy consumption into certain part of existing Computer Science curriculum for English schools; investigate how to motivate 7-to-11 years old kids to learn these concepts; promote responsive ICT (Information and Communications Technology) use by these kids in their daily life; raise their awareness of today’s ecological challenges. Sustainability-related ICT lessons developed aim to provoke computational thinking and creativity to foster understanding of environmental impact of ICT and positive environmental impact of small changes in user energy consumption behaviour. The importance of including sustainability into the Computer Science curriculum is due to the fact that ICT is both a solution and one of the causes of current world ecological problems. This research follows Agile software development methodology. In order to achieve the aforementioned goals, sustainability requirements, curriculum requirements and technical requirements are firstly analysed. Secondly, the web-based user interface is designed. In parallel, a set of three online lessons (video, slideshow and game) is created for the website GreenICTKids.com taking into account several green design patterns. Finally, the evaluation phase involves the collection of adults’ and kids’ feedback on the following: user interface; contents; user interaction; impacts on the kids’ sustainability awareness and on the kids’ behaviour with technologies. In conclusion, a list of research outcomes is as follows: 92% of the adults learnt more about energy consumption; 80% of the kids are motivated to learn about energy consumption and found the website easy to use; 100% of the kids understood the contents and liked website’s visual aspect; 100% of the kids will try to apply in their daily life what they learnt through the online lessons.

QTLs mapping for primary metabolites responsible of the organoleptic and nutritional characteristics of strawberry (Fragaria x ananassa)

The cultivated strawberry (Fragaria x ananassa) is the berry fruit most consumed worldwide and is well-known for its delicate flavour and nutritional properties. However, fruit quality attributes have been lost or reduced after years of traditional breeding focusing mainly on agronomical traits. To face the obstacles encountered in the improvement of cultivated crops, new technological tools, such as genomics and high throughput metabolomics, are becoming essential for the identification of genetic factors responsible of organoleptic and nutritive traits. Integration of “omics” data will allow a better understanding of the molecular and genetic mechanisms underlying the accumulation of metabolites involved in the flavour and nutritional value of the fruit. To identify genetic components affecting/controlling? fruit metabolic composition, here we present a quantitative trait loci (QTL) analysis using a 95 F1 segregating population derived from genotypes ‘1392’, selected for its superior flavour, and ‘232’ selected based in high yield (Zorrilla-Fontanesi et al., 2011; Zorrilla-Fontanesi et al., 2012). Metabolite profiling was performed on red stage strawberry fruits using gas chromatography hyphenated to time-of-flight mass spectrometry, which is a rapid and highly sensitive approach, allowing a good coverage of the central pathways of primary metabolism. Around 50 primary metabolites, including sugars, sugars derivatives, amino and organic acids, were detected and quantified after analysis in each individual of the population. QTL mapping was performed on the ‘232’ x ‘1392’ population separately over two successive years, based on the integrated linkage map (Sánchez-Sevilla et al., 2015). First, significant associations between metabolite content and molecular markers were identified by the non-parametric test of Kruskal-Wallis. Then, interval mapping (IM), as well as the multiple QTL method (MQM) allowed the identification of QTLs in octoploid strawberry. A permutation test established LOD thresholds for each metabolite and year. A total of 132 QTLs were detected in all the linkage groups over the two years for 42 metabolites out of 50. Among them, 4 (9.8%) QTLs for sugars, 9 (25%) for acids and 7 (12.7%) for amino acids were stable and detected in the two successive years. We are now studying the QTLs regions in order to find candidate genes to explain differences in metabolite content in the different individuals of the population, and we expect to identify associations between genes and metabolites which will help us to understand their role in quality traits of strawberry fruit.

Competencies Required in Education Research and Teaching Systematization according to Students from the Preschool, Primary and Secondary Education Programs of the University of Costa Rica

The purpose of this paper is to present the results of two online forums carried out with the participation of 42 students of the Licenciaturas  in Preschool Education, Primary Education and Secondary Education of the University of Costa Rica. The main purpose of the forums was to determine the insights of the participant students about the competencies they have achieved in the field of education research, and which have been the essential tools for them to systematize their own teaching practices. The discussion forums were part of the course FD5091 Métodos de Investigación Educativa [Education Research Methods] of the School of Teacher Education, delivered from March-April 2010.  Of the sample, 60 percent were students of the Preschool teaching program, 35 percent were from the Primary Education teaching program and 5 percent were from the Secondary Education teaching program in the fields of Science, Mathematics and Social Studies. According to the insights and beliefs showed by the participants –both, the future teachers and the profession practitioners–, there are no opportunities for research or systematization of their own teaching mediation, in the current work situation.(1) Translator’s Note: In Costa Rica, the “Licenciatura” is a one-year post-Bachelor study program, usually including thesis. “Primary Education” refers to students from the 1st to 6th grades, and “Secondary Education” refers to students from the 7th to 11th grades.

A Low Cost Controller Board for Teaching Robotics

This paper presents the Smarty Board; a new micro-controller board designed specifically for the robotics teaching needs of Australian schools. The primary motivation for this work was the lack of commercially available and cheap controller boards that would have all their components including interfaces on a single board. Having a single board simplifies the construction of programmable robots that can be used as platforms for teaching and learning robotics. Reducing the cost of the board as much as possible was one of the main design objectives. The target user groups for this device are the secondary and tertiary students, and hobbyists. Previous studies have shown that equipment cost is one of the major obstacles for teaching robotics in Australia. The new controller board was demonstrated at high-school seminars. In these demonstrations the new controller board was used for controlling two robots that we built. These robots are available as kits. Given the strong demand from high-school teachers, new kits will be developed for the next robotic Olympiad to be held in Australia in 2006.

Integrating science through Bayesian Belief Networks : case study of Lyngbya in Moreton Bay

Bayesian Belief Networks (BBNs) are emerging as valuable tools for investigating complex ecological problems. In a BBN, the important variables in a problem are identified and causal relationships are represented graphically. Underpinning this is the probabilistic framework in which variables can take on a finite range of mutually exclusive states. Associated with each variable is a conditional probability table (CPT), showing the probability of a variable attaining each of its possible states conditioned on all possible combinations of it parents. Whilst the variables (nodes) are connected, the CPT attached to each node can be quantified independently. This allows each variable to be populated with the best data available, including expert opinion, simulation results or observed data. It also allows the information to be easily updated as better data become available ----- ----- This paper reports on the process of developing a BBN to better understand the initial rapid growth phase (initiation) of a marine cyanobacterium, Lyngbya majuscula, in Moreton Bay, Queensland. Anecdotal evidence suggests that Lyngbya blooms in this region have increased in severity and extent over the past decade. Lyngbya has been associated with acute dermatitis and a range of other health problems in humans. Blooms have been linked to ecosystem degradation and have also damaged commercial and recreational fisheries. However, the causes of blooms are as yet poorly understood.