Production of medium-chain-length polyhydroxyalkanoate by Pseudomonas oleovorans grown in sugary cassava extract supplemented with andiroba oil

Pseudomonas oleovorans were grown on sugary cassava extracts supplemented with andiroba oil for the synthesis of a mediumchain- length polyhydroxyalkanoate (PHA MCL). The concentration of total sugars in the extract was approximately: 40 g/L in culture 1, 15 g/L in cultures 2 and 3, and 10 g/L in culture 4. Supplementation with 1% andiroba oil and 0.2 g/L of (NH4)2HPO4 was performed 6.5 hours after growth in culture 3, and supplementation with the same amount of andiroba oil and 2.4 g/L of (NH4)2HPO4 was performed at the beginning of growth in culture 4. The synthesis resulted mainly in 3-hydroxy-decanoate and 3-hydroxy-dodecanoate units; 3-hydroxy-butyrate, 3-hydroxy-hexanoate; and 3-hydroxy-octanoate monomers were also produced but in smaller proportions. P. oleovorans significantly accumulated PHA MCL in the deceleration phase of growth with an oxygen limitation but with sufficient nitrogen concentration to maintain cell growth. The sugary cassava extract supplemented with andiroba oil proved to be a potential substrate for PHA MCL production.

Risk Management in Sustainable Supply Chain

Growing awareness in corporate responsibility and issues related to sustainability is seen to increase innovativeness in a company as well as in its supply chain. The stakeholders’ awareness on sustainability has increased, and they demand the companies to identify sustainability risks and adapt procedures for mitigating them. The purpose of this thesis is to examine how risks are managed in sustainable supply chain. Definition of sustainability risks and risk management procedures construct the framework of the study. It is done through an empirical study conducted on 95 Finnish companies operating in the manufacturing industry. The data is acquired via an online questionnaire. The research has been conducted as a quantitative study utilizing the methods of statistical analysis, such as correlation analysis and factor analysis. The essential results of this thesis are identified risk-procedure connections, and the importance of different risks and procedures in the respondent companies.

Improving business processes in a globally dispersed make-to-order supply chain. Case study on outbound logistics in a Multinational Corporation

The purpose of this thesis is to find out how outbound logistics process can be improved by reducing unnecessary waste in a globally dispersed make-to-order (MTO) supply chain. The research problem was addressed by a multinational corporation that aims to find a solution for reducing unnecessary waste in their outbound logistics process. The focus is on customized products that are delivered via sea transportation. Theoretical framework for improving outbound logistics processes in globally dispersed MTO supply chain was created based on business process management, Porter’s value chain theory, value stream mapping and current reality tree. The empirical research was conducted by using constructive approach due to its ability to research a practical problem and to improve the existing practices. The data was collected from ten semi-structured interviews and three non-participant observations. By analysing the data and applying the theoretical framework, five types of waste were detected in the process that were seen to derive from six root causes. Practical solution was constructed to reduce the waste in the process by combining the existing literature with the ideas raising from empirical data. The results of this thesis suggest that a MNC with a globally dispersed MTO supply chain can improve its outbound logistics process by applying activities that enhance internal and external integration, collaboration and coordination, and increase predictability of the process. This research has practical relevance both for the case company as well as for other MNCs with globally dispersed MTO supply chains that aim to improve their outbound logistics processes. This research contributes to the BPM and CRA research by providing an evidence for their applicability in the new context.

Crawling up the value chain: domestic institutions and non-traditional foreign direct investment in Brazil, 1990-2010

Brazil attracted relatively little innovation-intensive and export-oriented foreign investment during the liberalization period of 1990 to 2010, especially compared with competitors such as China and India. Adopting an institutionalist perspective, I argue that multinational firm investment profiles can be partly explained by the characteristics of investment promotion policies and bureaucracies charged with their implementation. Brazil's FDI policies were passive and non-discriminating in the second half of the 1990s, but became more selective under Lula. Investment promotion efforts have often been undercut by weakly coordinated and inconsistent institutions. The paper highlights the need for active, discriminating investment promotion policies if benefits from non-traditional FDI are to be realized.

On the creative economy chain in Brazil: potential and challenges

ABSTRACT The article presents an analysis of the Creative Economy in Brazil, showing its development potential for the generation of income and employment, in order to the country's development resumption. They are initially presented concepts and features of the Creative Economy for, in sequence, to analyze the economic development profile and potential of this industry in Brazil. The empirical part introduces some methodological aspects, in continuing with the analysis of the creative chain contribution to the generation of Value Added and employment in the country, and a vision of their foreign trade.potential. Finally, the challenges to the implementation of public policies are investigated.

Developing Supply Chain Process Management and Measurement in Global Manufacturing Company

The objective of this research is to create a current state analysis of pulp supply chain processes from production planning to deliveries to customers. A cross-functional flowchart is being used to model these processes. These models help finding key performance indicators (KPIs) which enable examinations of the supply chain efficiency. Supply chain measures in different processes reveal the changes need processes that affect the whole supply chain and its efficiency and competitiveness. Structure of pulp supply chain differs from most of the other supply chains. The fact that there are big volumes of bulk products, small product variations and supply forecasts are made for the year ahead make the difference. This factor brings different benefits but also challenges when developing supply chain. This thesis divides pulp supply chain in three different main categories: production planning, warehousing and transportation. It provides tools for estimating the functionality of supply chain as well as developing the efficiency for different functions of supply chain. By having a better understanding of supply chain processes and measurement the whole supply chain structure can be developed significantly.

Offshoring and outsourcing under demand uncertainty -a supply chain management analysis

Outsourcing and offshoring or any combinations of these have not just become a popular phenomenon, but are viewed as one of the most important management strategies due to the new possibilities from globalization. They have been seen as a possibility to save costs and improve customer service. Executing offshoring and offshore outsourcing successfully can be more complex than initially expected. Potential cost savings resulting from of offshoring and offshore outsourcing are often based on lower manufacturing costs. However, these benefits might be conflicted by a more complex supply chain with service level challenges that can respectively increase costs. Therefore analyzing the total cost effects of offshoring and outsourcing is necessary. The aim of this Master´s Thesis was to to construct a total cost model using academic literature to calculate the total costs and analyze the reasonability of offshoring and offshore outsourcing production of a case company compared to insourcing production. The research data was mainly quantitative and collected mainly from the case company past sales and production records. In addition management level interviews from the case company were conducted. The information from these interviews was used for the qualification of the necessary quantitative data and adding supportive information that could not be gathered from the quantitative data. Both data collection and analysis were guided by a theoretical frame of reference that was based on academic literature concerning offshoring and outsourcing, statistical calculation of demand and total costs. The results confirm the theories that offshoring and offshore outsourcing would reduce total costs as both offshoring and offshore outsourcing options result in lower total annual costs than insourcing mainly due to lower manufacturing costs. However, increased demand uncertainty would make the alternative of offshore outsourcing more risky and difficult to manage. Therefore when assessing the overall impact of the alternatives, offshoring is the most preferable option. As the main cost savings in offshore outsourcing came from lower manufacturing costs, more specifically labour costs, the logistics costs in this case company did not have an essential effect in total costs. The management should therefore pay attention initially to manufacturing costs and then logistics costs when choosing the best production sourcing option for the company.

Investigations on the production of long chain fatty acids in Choanephora cucurbitarum (Berk. & Rav.) Thaxte

Thesis (M.Sc.)--Brock University, 1979.

Monte Carlo study of the XY-model on quasi-periodic lattices

Monte Carlo Simulations were carried out using a nearest neighbour ferromagnetic XYmodel, on both 2-D and 3-D quasi-periodic lattices. In the case of 2-D, both the unfrustrated and frustrated XV-model were studied. For the unfrustrated 2-D XV-model, we have examined the magnetization, specific heat, linear susceptibility, helicity modulus and the derivative of the helicity modulus with respect to inverse temperature. The behaviour of all these quatities point to a Kosterlitz-Thouless transition occuring in temperature range Te == (1.0 -1.05) JlkB and with critical exponents that are consistent with previous results (obtained for crystalline lattices) . However, in the frustrated case, analysis of the spin glass susceptibility and EdwardsAnderson order parameter, in addition to the magnetization, specific heat and linear susceptibility, support a spin glass transition. In the case where the 'thin' rhombus is fully frustrated, a freezing transition occurs at Tf == 0.137 JlkB , which contradicts previous work suggesting the critical dimension of spin glasses to be de > 2 . In the 3-D systems, examination of the magnetization, specific heat and linear susceptibility reveal a conventional second order phase transition. Through a cumulant analysis and finite size scaling, a critical temperature of Te == (2.292 ± 0.003) JI kB and critical exponents of 0:' == 0.03 ± 0.03, f3 == 0.30 ± 0.01 and I == 1.31 ± 0.02 have been obtained.

McKinnon Columbus Chain Limited Records 1948, 1958-1960, 1963-1969, 1971, 1974-1975, 1978, n.d.

Ontario Editorial Bureau (O.E.B.)

Investigations on the production of long chain fatty acids in Choanephora cucurbitarum (Berk.

The fatty acid composition of the total cellular lipids of Choanephora cucurbitarum incubated for 96 hrs on either glucose-ammonium sulfate or malt-weast extract media was determined. The major fatty acids were palmitic, palmitoleic, stearic and linoleic acids. The saturated fatty acid possessing the longest acyl chain was stearate (C 18:0). The presence of glutamic acid (2.0 x 10-1% or 1.36 x la-2M) in either of the above growth media resulted in increase in percent of 1f-linolenic acid, decrease in percent of linoleic ~iCid and appearance of a new series of fatty acid> C ~8 e.g. C ",,,,'V' C2k:O, C26,O. The addition of glutamic acid had no effect on the lipid yield but slightly decreased the degree of unsaturation. Compounds which duplicated the effect of glutamic acid were acetate, malate, citrate, succinate, 0( -ketoglutarate, prOline, -y -aminobutyric acid and glucose (3%) but not aspartic acid or alanine. ~o correlation was found between glutamic acid pool concentration and the presence in the growth medium of those compounds which stimulate long chain fatty acid production. Four hours of incubation with 27 JJ 1-1 glutamate supported the production of long chain fatty acids. This stimulation is inhibited if 272 .u M isophthalic acid is added with 27 AJ M glutamate. But, long chain fatty acids were detected when 27 JJ M eX -ketoglutarate is also present in the incubation mixture. Five hours of incubation with 100 ,Mg/ml of cycloheximide resulted in over 9CY/o inhibition of cytoplasmic :protein synthesise Glutamate (27 .uM) enhanced the synthesis of long chain fatty acids under these conditions. These findings are discussed in an attempt to provide a plausible explanation COmmon to compounds that support the production of long chain fatty acids.

The influence of myosin regulatory light chain phosphorylation on the contractile performance of fatigued mammalian skeletal muscle

ABSTRACT The myosm regulatory light chain (RLC) of type II fibres is phosphorylated by Ca2+ -calmodulin dependent myosin light chain kinase (skMLCK) during muscular activation. The purpose of this study was to explore the effect of skMLCK gene ablation on the fatigability of mouse skeletal muscles during repetitive stimulation. The absence of myosin RLC phosphorylation in skMLCK knockout muscles attenuated contractile performance without a significant metabolic cost. Twitch force was potentiated to a greater extent in wildtype muscles until peak force had diminished to ~60% of baseline (37.2 ± 0.05% vs. 14.3 ± 0.02%). Despite no difference in peak force (Po) and shortening velocity (Vo), rate of force development (+dP/dt) and shortening-induced deactivation (SID) were almost two-fold greater in WT muscles. The present results demonstrate that myosin RLC phosphorylation may improve contractile performance during fatigue; providing a contractile advantage to working muscles and protecting against progressive fatigue.

Dominion Chain Co., Limited advertisements, 1918, n.d.

The advertisements are for weed chains and unit chains for tires. Weed and unit chains were designed for use on muddy roads, snow, ice, wet pavement, and sand for single and dual solid truck tires. The Dominion Chain Co., Limited of Niagara Falls, Ontario began operation in 1914. The plant was located at 800 Bender Hill and in 1963 it employed between 250 and 500 people.

Bio-inspired optimization & sampling technique for side-chain packing in MCCE

The prediction of proteins' conformation helps to understand their exhibited functions, allows for modeling and allows for the possible synthesis of the studied protein. Our research is focused on a sub-problem of protein folding known as side-chain packing. Its computational complexity has been proven to be NP-Hard. The motivation behind our study is to offer the scientific community a means to obtain faster conformation approximations for small to large proteins over currently available methods. As the size of proteins increases, current techniques become unusable due to the exponential nature of the problem. We investigated the capabilities of a hybrid genetic algorithm / simulated annealing technique to predict the low-energy conformational states of various sized proteins and to generate statistical distributions of the studied proteins' molecular ensemble for pKa predictions. Our algorithm produced errors to experimental results within .acceptable margins and offered considerable speed up depending on the protein and on the rotameric states' resolution used.

Untangling the Organizational Ambiguities in Supply Chain Risk Recognition, Assessment, and Response: The Role of Network Embeddedness

In this thesis, I focus on supply chain risk related ambiguity, which represents the ambiguities firms exhibit in recognizing, assessing, and responding to supply chain disruptions. I, primarily, argue that ambiguities associated with recognizing and responding to supply chain risk are information gathering and processing problems. Guided by the theoretical perspective of bounded rationality, I propose a typology of supply chain risk related ambiguity with four distinct dimensions. I, also, argue that the major contributor to risk related ambiguity is often the environment, specifically the web of suppliers. Hence, I focus on the characteristics of these supplier networks to examine the sources of ambiguity. I define three distinct elements of network embeddedness – relational, structural, and positional embeddedness – and argue that the ambiguity faced by a firm in appropriately identifying the nature or impacts of major disruptions is a function of these network properties. Based on a survey of large North American manufacturing firms, I found that the extent of the relational ties a firm has and its position in the network are significantly related to supply chain risk related ambiguity. However, this study did not provide any significant support for the hypothesized relationship between structural embeddedness and ambiguity. My research contributes towards the study of supply chain disruptions by using the idea of bounded rationality to understand supply chain risk related ambiguity and by providing evidence that the structure of supply chain networks influences the organizational understanding of and responses to supply chain disruptions.