The use of software Mapavox for teaching graphics and games to blind and low vision students: a development through practices

Current policies on education to visually impaired point for a growing trend of including students with special educational needs in regular schools. However, most often this inclusion is not accompanied by an appropriate professional trained or infrastructure, which has been presented as a big problem for regular school teachers who have students with visual impairments in their classroom. Based on this situation, the Group of Extension in Tactile Cartography from UNESP - University of the State of São Paulo - Campus de Rio Claro - SP - Brazil has been developing educational material of geography and cartography to blind students at a special school. Among the materials developed in this study highlight the development of graphics and board games provided with sound capabilities through MAPAVOX, software developed in partnership with UFRJ - Federal University from Rio de Janeiro - RJ - Brazil. Through this software, sound capabilities can be inserted into built materials, giving them a multi-sensory character. In most cases the necessary conditions for building specific materials to students with visual impairments is expensive and beyond the reach of features from a regular school, so the survey sought to use easy access and low cost materials like Cork, leaf aluminum, material for fixing and others. The development of these materials was supported by preparation in laboratory and its subsequent test through practices involving blind students. The methodology used on the survey is based on qualitative research and non comparative analysis of the results. In other words, the material is built based on the special students perception and reality construction, not being mere adaptations of visual materials, but a construction focused on the reality of the visually impaired. The results proved were quite successful as the materials prepared were effective on mediating the learning process of students with disabilities. Geographical and cartographic concepts were seized by the students through the technology used, associated with the use of materials that took into account in its building process the perception of the students.

Internal Combustion Engine's Throttle Control as a Motivational Theme for Teaching Microprocessors Systems Lab Classes

The increased fuel economy and driveability of modern internal combustion engine vehicles (ICEVs) are the result of the application of advanced digital electronics to control the operation of the internal combustion engine (ICE). Microprocessors (and micro controllers) play a key role in the engine control, by precisely controlling the amount of both air and fuel admitted into the cylinders. Air intake is controlled by utilizing a throttle valve equipped with a motor and gear mechanism as actuator, and a sensor enabling the measurement of the angular position of the blades. This paperwork presents a lab setup that allows students to control the throttle position using a microcontroller that runs a program developed by them. A commercial throttle body has been employed, whereas a power amplifier and a microcontroller board have been hand assembled to complete the experimental setup. This setup, while based in a high-tech, microprocessor-based solution for a real-world, engine operation optimization problem, has the potential to engage students around a hands-on multidisciplinary lab activity and ignite their interest in learning fundamental and advanced topics of microprocessors systems.

Pedagogical practices carried out during an in-service teachers education project: approaching history and philosophy of science to physics teaching

We report here part of a research project developed by the Science Education Research Group, titled: "Teachers’ Pedagogical Practices and formative processes in Science and Mathematics Education" which main goal is the development of coordinated research that can generate a set of subsidies for a reflection on the processes of teacher training in Sciences and Mathematics Education. One of the objectives was to develop continuing education activities with Physics teachers, using the History and Philosophy of Science as conductors of the discussions and focus of teaching experiences carried out by them in the classroom. From data collected through a survey among local Science, Physics, Chemistry, Biology and Mathematics teachers in Bauru, a São Paulo State city, we developed a continuing education proposal titled “The History and Philosophy of Science in the Physics teachers’ pedagogical practice”, lasting 40 hours of lessons. We followed the performance of five teachers who participated in activities during the 2008 first semester and were teaching Physics at High School level. They designed proposals for short courses, taking into consideration aspects of History and Philosophy of Science and students’ alternative conceptions. Short courses were applied in real classrooms situations and accompanied by reflection meetings. This is a qualitative research, and treatment of data collected was based on content analysis, according to Bardin [1].

Sourcing the news: Teaching journalism students different approaches to sourcing practices

The experiences of a group of Australian university journalism students from diverse backgrounds are explored as they become involved in producing five editions of a new newspaper for the isolated community of Blackall in the Queensland Outback, 1500km north-west of Sydney. During this learning experience, non-traditional journalistic sourcing methods were trialled. This paper documents the exercise, compares the alternative methods with existing practices identified in the literature, and examines the effects and consequences of the exercise.

Investigating global practices in teaching young learners

This project investigated global practices in TEYL. Key aims were to: discover what policy/syllabus documents inform practices globally; investigate major pedagogies used; better understand teachers’ perceptions of their roles and responsibilities, including challenges faced; identify how local solutions to pedagogical issues can be effective and how these may resonate globally.

Teaching our children when to eat:how parental feeding practices inform the development of emotional eating-a longitudinal experimental design

Background: Emotional eating in children has been related to the consumption of energy-dense foods and obesity, but the development of emotional eating in young children is poorly understood. Objectives: We evaluated whether emotional eating can be induced in 5-7-y-old children in the laboratory and assessed whether parental use of overly controlling feeding practices at 3-5 y of age predicts a greater subsequent tendency for children to eat under conditions of mild stress at ages 5-7 y. Design: Forty-one parent-child dyads were recruited to participate in this longitudinal study, which involved parents and children being observed consuming a standard lunch, completing questionnaire measures of parental feeding practices, participating in a research procedure to induce child emotion (or a control procedure), and observing children's consumption of snack foods. Results: Children at ages 5-7 y who were exposed to a mild emotional stressor consumed significantly more calories from snack foods in the absence of hunger than did children in a control group. Parents who reported the use of more food as a reward and restriction of food for health reasons with their children at ages 3-5 y were more likely to have children who ate more under conditions of negative emotion at ages 5-7 y. Conclusions: Parents who overly control children's food intake may unintentionally teach children to rely on palatable foods to cope with negative emotions. Additional research is needed to evaluate the implications of these findings for children's food intake and weight outside of the laboratory setting. This trial was registered at clinicaltrials.gov as NCT01122290.

The impact of teacher and student perceptions in relation to their teaching and learning practices

Tesis (Licenciado en Lenguas Castellana, Inglés y Francés).--Universidad de La Salle. Facultad de Ciencias de La Educación. Licenciatura en Lengua Castellana, Inglés y Francés, 2014

Developing a supportive culture for teaching and learning : a university, faculty and school perspective

In the early 1990's the University of Salford was typical of most pre-1992 Universities in that whilst students provided much of it's income, little attention was paid to pedagogy. As Warren Piper (1994) observed, University teachers were professional in their subject areas but generally did not seek to acquire a pedagogy of HE. This was the case in Alsford. Courses were efficiently run but only a minority of staff were engaged in actively considering learning and teaching issues. Instead staff time was spent on research and commercial activity.----- In the mid-1990's the teaching environment began to change significantly. As well as Dearing, the advent of QAA and teaching quality reviews, Salford was already experiencing changes in the characteristics of its student body. Wideing access was on our agenda before it was so predominant nationally. With increasing numbers and heterogeneity of students as well as these external factors, new challenges were facing the University and teaching domain.----- This paper describes how a culture which values teaching, learning and pedagogic inquiry is being created in the university. It then focuses on parts of this process specific to the Faculty of Business and Informatics, namely the Faculty's Learning and Teaching Research Network and the establishment of the Centre for Construction Education in the School of Construction and Property Management.----- The Faculty of Business and Informatics' Learning and Teaching Research Network aims to raise the profile, quality and volume of pedagogic research across the five schools in the faculty. The initiative is targeted at all academics regardless of previous research experience. We hope to grow and nurture research potential where it exists and to acknowledge and use the existing expertise of subject-based researchers in collaborative ventures. We work on the principle that people are deliged to share what they know but need appreciation and feedback for doing so. A further ain is to surface and celebrate the significant amount of tacit knowledge in the area of pedagogy evidenced by the strength of student and employer feedback in many areas of the faculty's teaching.----- The Faculty embraces generic and core management expertise but also includes applied management disciplines in information systems and construction and property management where internationally leading research activities and networked centres of excellence have been established. Drawing from this experience, and within the context of the Faculty network, a Centre for Construction Education is being established with key international external partners to develop a sustainable business model of an enterprising pedagogic centre that can undertake useful research to underpin teaching in the Faculty whilst offering sustainable business services to allow it to benefit from pump-priming grant funding.----- Internal and external networking are important elements in our plans and ongoing work. Key to this are our links with the LTSN subject centres (BEST and CEBE) and the LTSN generic centre. The paper discusses networking as a concept and gives examples of practices which have proved useful in this context.----- The academic influences on our approach are also examined. Dixon’s (2000) work examining how a range of companies succeed through internal knowledge sharing has provided a range of transferable practices. We also examine the notion of dialogue in this context, defined by Ballantyne (1999) as ‘The interactive human process of reasoning together which comes into being through interactions based on spontaneity or need and is enabled by trust’ Social constructionist principles of Practical Authorship (Shotter, 1993, Pavlica, Holman and Thorpe, 1998)) have also proved useful in developing our perspective on learning and knowledge creation within our community of practice.

Building a supportive environment for teaching and learning : a reflective commentary

Universities are increasingly caught in the transition between college institutions of independant academics to become managed businesses of research and teaching and learning. This is introducing substantial issues with the work, approach and personal development needs of individual academics. It is causing even greater concerns for managers within universities. The developments in University Management have increasingly become driven towards issues of finance, quality and marketing. Organizational development in teaching and learning practices has been less commonly a point of focus. This paper outlines developments of this nature at the University of Salford. Through its combination of authors it does so at whole University, Faculty and School levels. It outlines the variety of ways in which teaching and learning developments can be supported within an organisation.

Orals ain't orals : how instruction and assessment practices affect delivery choices with prepared student oral presentations.

Despite an ostensibly technology-driven society, the ability to communicate orally is still seen as an essential ability for students at school and university, as it is for graduates in the workplace. The need to develop effective oral communication skills is often tied to future work-related tasks. One tangible way that educators have assessed proficiency in this area is through prepared oral presentations. While some use the terms oral communication and oral presentation interchangeably, other writers question the role more formal presentations play in the overall development of oral communication skills. Adding to the discussion, this paper is part of a larger study examining the knowledge and skills students bring into the academy from previous educational experiences. The study examines some of the teaching and assessment methods used in secondary schools to develop oral communication skills through the use of formal oral presentations. Specifically, it will look at assessment models and how these are used as a form of instruction as well as how they contribute to an accurate evaluation of student abilities. The purpose of this paper is to explore key terms and identify tensions between expectations and practice. Placing the emphasis on the ‘oral’ aspect of this form of communication this paper will particularly look at the ‘delivery’ element of the process.

An innovative learning model for teaching architectural technology using building information modelling : a Queensland University of Technology perspective

In architecture courses, instilling a wider understanding of the industry specific representations practiced in the Building Industry is normally done under the auspices of Technology and Science subjects. Traditionally, building industry professionals communicated their design intentions using industry specific representations. Originally these mainly two dimensional representations such as plans, sections, elevations, schedules, etc. were produced manually, using a drawing board. Currently, this manual process has been digitised in the form of Computer Aided Design and Drafting (CADD) or ubiquitously simply CAD. While CAD has significant productivity and accuracy advantages over the earlier manual method, it still only produces industry specific representations of the design intent. Essentially, CAD is a digital version of the drawing board. The tool used for the production of these representations in industry is still mainly CAD. This is also the approach taken in most traditional university courses and mirrors the reality of the situation in the building industry. A successor to CAD, in the form of Building Information Modelling (BIM), is presently evolving in the Construction Industry. CAD is mostly a technical tool that conforms to existing industry practices. BIM on the other hand is revolutionary both as a technical tool and as an industry practice. Rather than producing representations of design intent, BIM produces an exact Virtual Prototype of any building that in an ideal situation is centrally stored and freely exchanged between the project team. Essentially, BIM builds any building twice: once in the virtual world, where any faults are resolved, and finally, in the real world. There is, however, no established model for learning through the use of this technology in Architecture courses. Queensland University of Technology (QUT), a tertiary institution that maintains close links with industry, recognises the importance of equipping their graduates with skills that are relevant to industry. BIM skills are currently in increasing demand throughout the construction industry through the evolution of construction industry practices. As such, during the second half of 2008, QUT 4th year architectural students were formally introduced for the first time to BIM, as both a technology and as an industry practice. This paper will outline the teaching team’s experiences and methodologies in offering a BIM unit (Architectural Technology and Science IV) at QUT for the first time and provide a description of the learning model. The paper will present the results of a survey on the learners’ perspectives of both BIM and their learning experiences as they learn about and through this technology.