La prise en charge de l'hyper- tension artériette par des médecins en formation suit-elle les recommandations actuettes [Are the guidelines for the management of hypertensive patients followed by primary care residents and fellows?]

Numerous international guidelines are published which define how hypertensive patients should be managed. Are these guidelines followed and applicable? We have assessed the quality of management of 225 hypertensive ambulatory patients followed by young fellows in teaching for primary care medicine. The control rate defined by a blood pressure < 140/90 mmHg was 32,4%. In the last three visits, 60% of hypertensive patients had a blood pressure measurement. 79% of blood pressure readings ended with 0 or 5. Blood pressure control was identical whatever the comorbidities. In conclusion, the quality of management of hypertensive patients by in teaching fellow could potentially be improved. The actual recommendations are limited in their application. The control of high risk vascular patients is not better than those with a lower risk.

Project controlling and risk management in German machine and plant engineering industry

Tutkielman tavoitteena on määritellä projektikontrolloinnin ja - riskijohtamisen roolit ja toiminnot saksalaisissa kone- ja tehdassuunnitteluteollisuusyrityksissä. Tämä on kvalitatiivinen tutkielma, jossa käytetään voimakkaasti kuvailevia metodeita. Materiaali tutkimuksen empiiriseen osaan kerättiin kyselykaavakkeen avulla. Kyselykaavakkeiden tulokset käsiteltiin Microsoft Office Access- ohjelmalla ja analysoitiin Microsoft Office Excel- ohjelmalla ja Pivot table- työkalun avulla. Tutkimustulokset osoittavat, että asianmukaisessa projektikontrollointi- ja riskijohtamismetodien käytössä ja käyttötiheydessä esiintyy puutteita saksalaisissa kone- ja tehdassuunnitteluteollisuusyrityksissä. Tehostamalla ja keskittymällä enemmän projektikontrollointi- ja riskijohtamismetodeihin ja prosesseihin sekä projektien että yritysten suorituskyky paranisi.

Low C-reactive protein values at admission predict mortality in patients with severe community-acquired pneumonia caused by Streptococcus pneumoniae that require intensive care management.

PURPOSE: To identify risk factors associated with mortality in patients with severe community-acquired pneumonia (CAP) caused by S. pneumoniae who require intensive care unit (ICU) management, and to assess the prognostic values of these risk factors at the time of admission. METHODS: Retrospective analysis of all consecutive patients with CAP caused by S. pneumoniae who were admitted to the 32-bed medico-surgical ICU of a community and referral university hospital between 2002 and 2011. Univariate and multivariate analyses were performed on variables available at admission. RESULTS: Among the 77 adult patients with severe CAP caused by S. pneumoniae who required ICU management, 12 patients died (observed mortality rate 15.6 %). Univariate analysis indicated that septic shock and low C-reactive protein (CRP) values at admission were associated with an increased risk of death. In a multivariate model, after adjustment for age and gender, septic shock [odds ratio (OR), confidence interval 95 %; 4.96, 1.11-22.25; p = 0.036], and CRP (OR 0.99, 0.98-0.99 p = 0.034) remained significantly associated with death. Finally, we assessed the discriminative ability of CRP to predict mortality by computing its receiver operating characteristic curve. The CRP value cut-off for the best sensitivity and specificity was 169.5 mg/L to predict hospital mortality with an area under the curve of 0.72 (0.55-0.89). CONCLUSIONS: The mortality of patients with S. pneumoniae CAP requiring ICU management was much lower than predicted by severity scores. The presence of septic shock and a CRP value at admission <169.5 mg/L predicted a fatal outcome.

Potential health-care service utilization substitution effects induced by case management for emergency department frequent users

BACKGROUND: In most of the emergency departments (ED) in developed countries, a subset of patients visits the ED frequently. Despite their small numbers, these patients are the source of a disproportionally high number of all ED visits, and use a significant proportion of healthcare resources. They place a heavy economic burden on hospital and healthcare systems budgets overall. Several interventions have been carried out to improve the management of these ED frequent users. Case management has been shown in some North American studies to reduce ED utilization and costs. In these studies, cost analyses have been carried out from the hospital perspective without examining the costs induced by healthcare consumed in the community. However, case management might reduce ED visits and costs from the hospital's perspective, but induce substitution effects, and increase health service utilization outside the hospital. This study examined if an interdisciplinary case-management intervention-compared to standard ED care -reduced costs generated by frequent ED users not only from the hospital perspective, but also from the healthcare system perspective-that is, from a broader perspective taking into account the costs of healthcare services used outside the hospital. METHODS: In this randomized controlled trial, 250 adult frequent emergency department users (5 or more visits during the previous 12 months) who visited the ED of the University Hospital of Lausanne, Switzerland, between May 2012 and July 2013 were allocated to one of two groups: case management intervention (CM) or standard ED care (SC), and followed up for 12 months. Depending on the perspective of the analysis, costs were evaluated differently. For the analysis from the hospital's perspective, the true value of resources used to provide services was used as a cost estimate. These data were obtained from the hospital's analytical accounting system. For the analysis from the health-care system perspective, all health-care services consumed by users and charged were used as an estimate of costs. These data were obtained from health insurance providers for a subsample of participants. To allow comparisons in a same time period, individual monthly average costs were calculated. Multivariate linear models including a fixed effect "group" were run using socio-demographic characteristics and health-related variables as controlling variables (age, gender, educational level, citizenship, marital status, somatic and mental health problems, and risk behaviors).

Reporting for account and sales management

Tutkimuksen tavoitteena oli kerätä Elcoteq Network Oyj:n myyntihenkilöiden tietotarpeet ja konkretisoida ne raportoinnin kautta. Tutkimus keskittyi asiakasvirran eri vaiheissa tarvittavaan asiakas- ja projektikohtaiseen tietoon. Tarkoituksena oli parantaa raportointia vastaamaan asiakkaan ja sales case:n hallintaa alkaen asiakasvirran uusasiakasvaiheesta ja projektin arvioinnista. Tietotarpeet kerättiin haastattelujen avulla ja osallistumalla aiheeseen liittyviin projekteihin. Haastattelujen ja teorian avulla projektiliiketoiminnan avainpiirteet ja asiakaskannattavuuteen vaikuttavat tekijät kerättiin yhteen ja muutettiin konkretiaksi raportoinnin parannusehdotuksien kautta. Tutkimus osoitti, että myyntihenkilöiden näkökulmasta olisi muodostettava uudet raportit tukemaan asiakkaan ja projektin hallintaa. Ennustettu voidaan verrata toteutuneeseen ja sekä asikkuuden, että sales case:n seuranta paranee uusien raporttien avulla. Budjetit, sekä asiakaskohtaiset tavoitteet voidaan laatia luotettavimmin ja kokonaiskuva asiakkuuden ja projektin kannattavuudesta pystytään näkemään ko. raporteista sekä graafein, että numeerisena tietona.

Projektisapuolten vaatimukset kolmannen sukupolven matkaviestinverkon rakentamisprojektin knowledge management -järjestelmälle

Projektin johtaminen informaatioaikakaudella merkitsee, yhä useammassa tapauksessa, virtuaalisen verkoston tietämyksen hallitsemista ja johtamista. Kolmannen sukupolven matkaviestinverkon rakentaminen on virtuaaliverkostoa hyväkseen käyttävä projekti, joka koostuu lukuisista osapuolista.Matkaviestinverkkoprojektien laajentuminen ja kilpailun kiristyminen alalla ovat nostaneet knowledge management -järjestelmien kysyntää. Kysyntä kohdistuu voimakkaimmin järjestelmiin, joiden avulla matkaviestinverkkotoimitusprojektin kaikki toiminnot pystytään käsittelemään yhdessä järjestelmässä. Tämän tutkimuksen pääasiallisena tavoitteena on ollut selvittää keskeisimmät vaatimukset kolmannen sukupolven matkaviestinverkon rakentamisprojektin knowledge management ?järjestelmälle. Tutkimus toteutettiin kirjallisuuden ja avoimien teemahaastattelujen avulla, käyttäen kvalitatiivisiä tutkimusmenetelmiä.Haastattelut osoittivat, että tärkeimmät vaatimukset kolmannen sukupolven matkaviestinverkkoja rakentavan projektiorganisaation knowledge management -järjestelmälle ovat: 1. Knowledge management -järjestelmän tulee toimia keskitettynä tietovarastona.2. Projektissa käsiteltävään tietoon on pystyttävä porautumaan vähintään prosessi- ja paikkatietoon pohjautuvista näkökulmista. 3. Pääsyn knowledge management -järjestelmään tulee olla mahdollista kaikille projektin osapuolille.4. Pääsyn knowledge management -järjestelmään tulee olla mahdollista mistä tahansa ja mihin kellonaikaan tahansa.5. Knowledge management -järjestelmän käyttöliittymän tulee olla mahdollisimman yksinkertainen. Järjestelmän tulee olla yhteydessä organisaatioiden muihin järjestelmiin.

Values-driven management as perceived by personnel

Organizational values can be used as a tool for improving organization performance. The role of the leaders in building support and developing behaviours consistent with values-driven management is studied through value perceptions by the personnel in the object organization.

Prise en charge de la candidose oesophagienne en médecine de premier recours [Management of the esophageal candidiasis by the primary care physician].

La candidose oesophagienne est l'une des infections opportunistes les plus fréquentes chez les patients infectés par le VIH. Ce diagnostic se rencontre également chez des patients sans immunodéficience manifeste. Certains facteurs de risque sont également associés à cette pathologie, tels que les traitements corticoïdes systémiques et inhalés ou les traitements par inhibiteurs de la pompe à protons et les antihistaminiques H2. En l'absence de facteur de risque identifié, un déficit immunitaire primaire devrait être recherché. La prévention de la candidose oesophagienne est basée en premier lieu sur l'identification des facteurs de risque, ainsi qu'un meilleur contrôle de ceux-ci. Cet article présente en détail la physio-pathologie, la clinique et la prise en charge par le médecin de premier recours de la candidose oesophagienne. Nous aborderons également les moyens de prévention de la candidose oesophagienne quand il y a lieu. Esophageal candidiasis is one of the most common opportunistic infections in patients infected by human immunodeficiency virus (HIV). This pathology is also found in patients without overt immunodeficiency. Other risk factors are known to be associated with this disease like inhaled or systemic corticosteroid treatment or proton-pump inhibitors and H2 receptor antagonists. In the absence of identified risk factors, a primary immune deficiency should be sought. Prevention of esophageal candidiasis is based primarily on the identification of risk factors, and a better control of them. This article presents a review of the physiopathology, clinical presentation and management of esophageal candidiasis by primary care physicians. We will also discuss ways of preventing esophageal candidiasis when necessary.

Keeping the balance? Management of oxidative stress, body mass and reproduction under energetic constraints by dispersing and philopatric collared flycatchers.

Dispersal, i.e. individual movement between breeding sites, is a key process for metapopulation dynamics and gene flow. Its success can be modulated by phenotypic differences between dispersing and philopatric individuals, or dispersal syndromes. However, the environmental (external) and physiological (internal) constraints underlying such syndromes remain poorly known. This project aimed at clarifying the impact of environmental variation and oxidative constraints, linked to the reactive oxygen species produced during respiration, on phenotypes associated to dispersal in a passerine bird, the collared flycatcher Ficedula albicollis. Energetic demand was experimentally (i) increased through a wing load manipulation or (ii) relieved through food supplementation. The oxidative balance of breeding flycatchers was influenced by complex interactions of dispersal status and extrinsic factors (breeding density, year, experimental treatments). Interestingly, antioxidant capacity was influenced both by permanent individual differences and by food availability, whereas measures of pro-oxidants were highly variables within individuals. Environmental variation and energetic constraints also modulated the differences in reproduction associated with dispersal: dispersing and philopatric birds differ in their management of the oxidative balance when it is competing with reproductive investment. This thesis highlights that reaction norms, rather than fixed differences, often shape traits associated to dispersal. ----- Le déplacement d'un individu entre sites de reproduction, ou dispersion, est un processus clé pour la dynamique des métapopulations et les flux de gènes. Son succès peut être modulé par des différences de phénotype, ou syndromes de dispersion. Cependant, les contraintes environnementales et physiologiques qui sous-tendent ces syndromes restent mal connues. Ce projet vise à clarifier l'impact des variations environnementales et des contraintes oxydatives (liées aux espèces réactives de l'oxygène produites durant la respiration) sur les phénotypes associés à la dispersion chez un passereau, le gobemouche à collier Ficedula albicollis. La demande énergétique a été expérimentalement (i) augmentée en manipulant la surface alaire ou (ii) diminuée par une supplémentation en nourriture. L'équilibre oxydo-réducteur des gobemouches en reproduction est influencé par des interactions complexes entre statut de dispersion et facteurs extrinsèques (densité de couples reproducteurs, année, traitement expérimental). La capacité antioxydante dépend principalement de différences permanentes entre individus, alors que les pro-oxydants présentent de grandes variations intra-individu. Environnement et contraintes énergétiques modulent aussi les différences de reproduction liées à la dispersion : les oiseaux dispersants et philopatriques diffèrent dans leur gestion de l'équilibre oxydo-réducteur lorsqu'il est en compétition avec l'investissement reproducteur. Ce travail souligne que les traits associés à la dispersion sont souvent déterminés par des normes de réaction à l'environnement et non des différences fixées entre individus.

Creating Global Competitive Advantage by Global Product Technology Transfers

Globalization is the trend which is realized in all areas in today’s business world. Pressure for cost reduction, changes in market situation and available scale economies have changed business environment more global than ever. To respond to new situation, companies are establishing global strategies. In this thesis, available global competitive advantages in electrical machine industry are studied in context of gaining them by global technology transfers. In theory part, establishing global strategy and competitive advantage is considered with connection to global sourcing and supply chain management. Additionally, market development in 21st century and its impact on global strategies is studied. In practice, global manufacturing is enabled by technology transfer projects. Smooth and fast project implementation enables faster and more flexible production ramp up. By starting the production available competitive advantages can be realized. In this thesis the present situation of technology transfer projects and the risks and advantages related to global manufacturing are analyzed. The analysis of implemented technology transfer projects indicates that project implementation is in good level. For further development of project execution 10 minor suggestions could be presented with two major ones: higher level standardization and development of product information model to support better global manufacturing.

Introducing Continuous Integration for C and C++ Software Development Projects on Linux Platform

Software integration is a stage in a software development process to assemble separate components to produce a single product. It is important to manage the risks involved and being able to integrate smoothly, because software cannot be released without integrating it first. Furthermore, it has been shown that the integration and testing phase can make up 40 % of the overall project costs. These issues can be mitigated by using a software engineering practice called continuous integration. This thesis work presents how continuous integration is introduced to the author's employer organisation. This includes studying how the continuous integration process works and creating the technical basis to start using the process on future projects. The implemented system supports software written in C and C++ programming languages on Linux platform, but the general concepts can be applied to any programming language and platform by selecting the appropriate tools. The results demonstrate in detail what issues need to be solved when the process is acquired in a corporate environment. Additionally, they provide an implementation and process description suitable to the organisation. The results show that continuous integration can reduce the risks involved in a software process and increase the quality of the product as well.

Development of Collaborative Product Structure Management

The purpose of this thesis is to develop an environment or network that enables effective collaborative product structure management among stakeholders in each unit, throughout the entire product lifecycle and product data management. This thesis uses framework models as an approach to the problem. Framework model methods for development of collaborative product structure management are proposed in this study, there are three unique models depicted to support collaborative product structure management: organization model, process model and product model. In the organization model, the formation of product data management system (eDSTAT) key user network is specified. In the process model, development is based on the case company’s product development matrix. In the product model framework, product model management, product knowledge management and design knowledge management are defined as development tools and collaboration is based on web-based product structure management. Collaborative management is executed using all these approaches. A case study from an actual project at the case company is presented as an implementation; this is to verify the models’ applicability. A computer assisted design tool and the web-based product structure manager, have been used as tools of this collaboration with the support of the key user. The current PDM system, eDSTAT, is used as a piloting case for key user role. The result of this development is that the role of key user as a collaboration channel is defined and established. The key user is able to provide one on one support for the elevator projects. Also the management activities are improved through the application of process workflow by following criteria for each project milestone. The development shows effectiveness of product structure management in product lifecycle, improved production process by eliminating barriers (e.g. improvement of two-way communication) during design phase and production phase. The key user role is applicable on a global scale in the company.