Johdon laskentatoimen ohjaus- ja hallintajärjestelmien hyödyntäminen yritysverkostoissa

Tutkimuksen aiheena on johdon laskentatoimen ohjaus- ja hallintajärjestelmien hyödyntäminen yritysverkostoissa. Yritysten välisten suhteiden hallinnassa käytettävät menetelmät koostuvat pääasiassa johdon laskentatoimen ja suorituskyvyn mittaamisen menetelmistä. Verkostojen ohjaus ja hallinta on tärkeää, koska se on verkostojen tehokkaan toiminnan kriittinen menestystekijä ja kilpailuedun lähde. Suorituskyvyn mittaamisella, johdon laskentatoimella ja johdon kontrollitehtävällä on keskenään riippuvuussuhteet, joiden pitäisi toimia sopusoinnussa. Suorituskyvyn mittaamisen ja johdon laskentatoimen tutkimus yritysten verkostoympäristöissä on kohtalaisen tuore ilmiö, jonka vuoksi aihealueen tutkimus on vielä varsin pirstaleista ja hajanaista. Tämän vuoksi tutkimuksen tavoite on muodostaa selkeä kokonaiskuva siitä kuinka johdon laskentatoimen ohjaus- ja hallintajärjestelmiä voidaan hyödyntää yritysverkostojen ohjauksessa ja hallinnassa. Tutkimuksessa myös selvitetään mitä haasteita näiden menetelmien hyödyntämiseen yritysverkostoissa sisältyy. Tutkimusaineistona on käytetty aikaisempia tutkimuksia sekä tutkimusta varten tehtyjä haastatteluita. Tutkimukseen haastateltiin neljästä yritysverkostosta henkilöitä, jotka vastasivat verkoston toiminnasta. Haastatteluiden avulla pyritään täydentämään kirjallisuuskatsauksen pohjalta luotua teoriaa ja selvittämään kuinka verkoston ohjaus- ja hallinta hoidetaan haastateltavissa verkostoissa, millä menetelmin ja mitä haasteita siihen liittyy. Verkostotoimintaan soveltuvien menetelmien ja suorituskykymittareiden kehittäminen on hankalaa, koska jokaisen verkoston tarpeet ja haasteet ovat erilaiset. Uusien menetelmien kehittämiselle ei nähdä tarvetta, vaan kyse on olemassa olevien menetelmien soveltamisesta verkostonäkökulmasta. Menetelmät on rakennettu yksittäisen yrityksen mittaamiseen, joten ne eivät sovellu sellaisenaan käytettäväksi verkostoihin, vaan niitä täytyy kehittää verkoston yksilöllisten tarpeiden mukaan. Tämä vaatii kuitenkin verkostolta osaamista ja halua kehittyä. Verkostojen haasteet liittyvät sekä yritystasolle että verkostotasolle. Yritysten tuottaman informaation, laskentajärjestelmien, tietotaidon, resurssien ja kehityshalun tulee olla hyvällä tasolla, jotta koko verkoston mittaaminen onnistuu luotettavasti. Lisäksi verkostotoiminta pitää sisällään laskentateknisiä, menetelmiin ja informaation vaihtamiseen liittyviä haasteita. Verkostoympäristön laskentatoimen tutkimuksessa ei ole yhtenäistä, laajasti hyväksyttyä teoriaa, koska tutkimussuuntaukset ja –tulokset ovat moniulotteisia ja vaihtelevia.

Sick leave prescribing practices in Finland

Background: Sick leave prescribing is a common task of doctors and being on sick leave results in notable economic consequences to society. However, there appears to be limited research into this field and the factors affecting sick leave prescribing practices of doctors. Aims: To examine the prescribing of sick leave by doctors and dentists, the extent of variation in practices, whether clinician-related factors and local structural factors affect variation, and the economic consequences of varying practices. Materials and methods: Questionnaire studies with 19 or 16 hypothetical patient cases were conducted among 165 primary health care (PHC) physicians, 356 occupational health care (OHC) physicians, 338 surgeons and 1132 dentists. Results: The difference between the lowest and the highest number of sick leave days prescribed for the 19 patient cases was almost four-fold in PHC physicians and surgeons and eight-fold in OHC physicians, which represents a societal cost of tens of thousands of euros. Some dentists did not prescribe sick leave to any of the 16 patient cases, and some prescribed nearly a hundred days altogether. The overall number of sick leave days OHC physicians prescribed was smaller than in PHC physicians. More days of sick leave were prescribed by those working in smaller municipalities than larger population centres. Conclusion: There was considerable variation in the sick leave prescribing practices of Finnish health care professionals. This means that patients may not receive equal social benefits. Sick leave carries considerable economic consequences, and unifying prescribing practices could bring significant cost savings to society.

Valtatie 4 Vehniä-Äänekoski Ympäristövaikutusten arviointimenettely : Ympäristövaikutusten arviointiohjelma

Valtatien 4 parantaminen Vehniän-Äänekosken välisellä osuudella on osa Jyväskylä-Oulu yhteysvälin kehittämistä, jota toteutetaan vaiheittain. Ympäristövaikutusten arviointiohjelma (YVA-ohjelma) kuuluu ympäristövaikutusten arviointimenettelyyn (YVA), joka koskee valtatien 4 parantamishanketta Laukaan Vehniän ja Äänekosken välillä. Nykyistä nelostietä pitkin mitattuna suunnitteluosuuden pituus on noin 15 km. Hankkeesta vastaavana toimii Keski-Suomen elinkeino-, liikenne- ja ympäristökeskuksen Liikenne ja infrastruktuurivastuualue. YVA-menettely perustuu ympäristövaikutusten arviointimenettelystä annettuun lakiin (468/ 1994, muutettu 267/ 1999 ja 458/ 2006) ja sitä täydentävään asetukseen. YVA-menettelyssä tutkitaan tien parantamisen vaihtoehtojen ympäristövaikutuksia. YVA-menettelyn tarkoituksena on tuottaa tietoa hankkeen eri vaihtoehtojen ympäristövaikutuksista päätöksen teon pohjaksi. YVA-menettelyyn liittyy keskeisesti myös kansalaisten osallistuminen ja tiedonsaanti. YVA-ohjelma on työsuunnitelma ympäristövaikutusten arvioinnin toteuttamissa. Siinä esitetään hankkeen perustiedot, tutkittavat vaihtoehdot ja kuvaus ympäristön nykytilasta. Ohjelmassa kuvaillaan vaikutusten arvioinnin menetelmät ja lähtötiedot. Ohjelmassa esitetään myös suunnitelma osallistumisen järjestämisestä, tiedottamisesta, palautteen antamisesta ja hankkeen aikataulusta. YVA-menettelyn hankealueena on valtatie 4 Vehniän-Huutomäen (vt 13) välisellä osuudella ja alemman tieverkon järjestelyjen edellyttämä aluerajaus. Huutomäen liittymä ei sisälly tarkastelualueeseen, koska sille laaditaan parhaillaan yleissuunnitelmaa. Suunnittelu käynnistetään nyt YVA-lain mukaisella ympäristövaikutusten arviointimenettelyllä siten, että aluksi laaditaan ympäristövaikutusten arviointiohjelma ja sen jälkeen tehdään ympäristövaikutusten arviointiselostus, jonka pohjalta laaditaan yleissuunnitelma. Ympäristövaikutusten arviointiohjelma toimii työsuunnitelmana seuraavalle suunnitteluvaiheelle eli ympäristövaikutusten arviointiselostuksen laatimiselle.

Tuoreita näkökulmia kirjastojen vaikuttavuuteen: valmisteilla olevia opinnäytetöitä

Sami Serolan esitys Vaikuttavuuden arvo -seminaarissa Helsingissä 29.10.2014.

Virtual Testing of Active Magnetic Bearing Systems based on Design Guidelines given by the Standards

Active Magnetic Bearings offer many advantages that have brought new applications to the industry. However, similarly to all new technology, active magnetic bearings also have downsides and one of those is the low standardization level. This thesis is studying mainly the ISO 14839 standard and more specifically the system verification methods. These verifying methods are conducted using a practical test with an existing active magnetic bearing system. The system is simulated with Matlab using rotor-bearing dynamics toolbox, but this study does not include the exact simulation code or a direct algebra calculation. However, this study provides the proof that standardized simulation methods can be applied in practical problems.

Multiple sclerosis and pregnancy: clinical and immunological aspects

Background: Multiple Sclerosis (MS) is an autoimmune disease of the central nervous system that affects most commonly young women in their childbearing age. Previous studies have shown that MS relapse rate usually reduces during pregnancy and increases again after delivery. Patients with MS and their treating physicians are interested to know more about the risks the disease can cause to pregnancy and how pregnancy affects the disease. The reasons for increased relapse rate after delivery are not entirely clear, but loss of pregnancy related immune tolerance and changes in the hormonal status at the time of delivery seem to be of relevance. Aims and methods: The aims of this study were to follow the natural course of MS during and after pregnancy, evaluate pregnancy related risks among MS patients, follow the inflammatory response of MS patients during and after pregnancy and clarify the risk of relevant co-morbidities known to affect other autoimmune diseases after pregnancy and compare these results to healthy controls. This study was a part of a prospective nation-wide follow-up study of 60 Finnish MS patients. All eligible MS patients were enrolled in the study during the years 2003-2005. A prospective followup continued from early pregnancy until six months postpartum. MS relapses, EDSS scores and obstetric details were recorded. Blood samples were obtained from the patients at early, middle, and late pregnancy, after delivery and one month, three months and six months postpartum. Results: MS patients were no more likely to experience pregnancy or delivery complications than the Finnish mothers in general. The need of instrumental assistance, however, was higher among mothers with MS. Disease activity followed the course seen in previous studies. The majority of mothers (90.2%) breastfed their babies. Contrary to previous results, breastfeeding did not protect MS patients from disease worsening after delivery in present study. Mothers with active pre-pregnancy disease chose to breastfeed less frequently and started medication instead. MS patients presented with higher prevalence of elevated thyroid autoantibodies postpartum than healthy controls, but the rate of thyroid hormonal dysfunction was similar as that of healthy controls. The mode of delivery nor the higher rate of tissue damage assessed with C-reactive protein concentration were not predictive of postpartum relapses. The prevalence of gestational diabetes was slightly higher among mothers with MS compared to Finnish mothers in general, but postpartum depression was observed in similar rates. MS patients presented with significantly lower serum concentrations of vitamin D during pregnancy and postpartum than healthy controls. Conclusions: Childbearing can be regarded as safe for mothers with MS as it is for healthy mothers in general. Breastfeeding can be recommended, but it should be done only after careful evaluation of the individual risk for postpartum disease activation. Considering MS patients tend to develop thyroid antibody positivity after delivery more often than healthy controls and that certain treatments can predispose MS patients to thyroid hormonal dysfunction, we recommend MS mothers to be screened for thyroid abnormalities during pregnancy and after delivery. Increased risk for gestational diabetes should be kept in mind when following MS mothers and glucose tolerance test in early pregnancy should be considered. Adequate vitamin D supplementation is essential for MS mothers also during pregnancy and postpartum period.

Adaptiivisen hitsausvalokaaren hyödyntäminen MAG-kuumakaarihitsauksessa

Tässä kandidaatintyössä tutkitaan MIG/MAG-hitsauksessa käytettävien ohjelmistoratkaisujen kuumakaarihitsaukseen tuomia etuja perinteisiin menetelmiin verrattuna. Pääpaino on hitsausnopeuden, tunkeuman ja laadun tarkastelussa. Hitsauskokeissa käytettävät menetelmät ovat perinteinen 1-MIG-kuumakaarihitsaus ja 1-MIG-kuumakaarihitsaus Kemppi WiseFusion toiminnolla.

Post-processing and analysis of tracked hand trajectories

In this thesis, the suitability of different trackers for finger tracking in high-speed videos was studied. Tracked finger trajectories from the videos were post-processed and analysed using various filtering and smoothing methods. Position derivatives of the trajectories, speed and acceleration were extracted for the purposes of hand motion analysis. Overall, two methods, Kernelized Correlation Filters and Spatio-Temporal Context Learning tracking, performed better than the others in the tests. Both achieved high accuracy for the selected high-speed videos and also allowed real-time processing, being able to process over 500 frames per second. In addition, the results showed that different filtering methods can be applied to produce more appropriate velocity and acceleration curves calculated from the tracking data. Local Regression filtering and Unscented Kalman Smoother gave the best results in the tests. Furthermore, the results show that tracking and filtering methods are suitable for high-speed hand-tracking and trajectory-data post-processing.

Concentration of hydrogen peroxide and improving its energy efficiency

Distillation is a unit operation of process industry, which is used to separate a liquid mixture into two or more products and to concentrate liquid mixtures. A drawback of the distillation is its high energy consumption. An increase in energy and raw material prices has led to seeking ways to improve the energy efficiency of distillation. In this Master's Thesis, these ways are studied in connection with the concentration of hydrogen peroxide at the Solvay Voikkaa Plant. The aim of this thesis is to improve the energy efficiency of the concentration of the Voikkaa Plant. The work includes a review of hydrogen peroxide and its manufacturing. In addition, the fundamentals of distillation and its energy efficiency are reviewed. An energy analysis of the concentration unit of Solvay Voikkaa Plant is presented in the process development study part. It consists of the current and past information of energy and utility consumptions, balances, and costs. After that, the potential ways to improve the energy efficiency of the distillation unit at the factory are considered and their feasibility is evaluated technically and economically. Finally, proposals to improve the energy efficiency are suggested. Advanced process control, heat integration and energy efficient equipment are the most potential ways to carry out the energy efficient improvements of the concentration at the Solvay Voikkaa factory. Optimization of the reflux flow and the temperatures of the overhead condensers can offer immediate savings in the energy and utility costs without investments. Replacing the steam ejector system with a vacuum pump would result in savings of tens of thousands of euros per year. The heat pump solutions, such as utilizing a mechanical vapor recompression or thermal vapor recompression, are not feasible due to the high investment costs and long pay back times.

Graphene from Graphite by Chemical and Physical Techniques.

Graphene is a material with extraordinary properties. Its mechanical and electrical properties are unparalleled but the difficulties in its production are hindering its breakthrough in on applications. Graphene is a two-dimensional material made entirely of carbon atoms and it is only a single atom thick. In this work, properties of graphene and graphene based materials are described, together with their common preparation techniques and related challenges. This Thesis concentrates on the topdown techniques, in which natural graphite is used as a precursor for the graphene production. Graphite consists of graphene sheets, which are stacked together tightly. In the top-down techniques various physical or chemical routes are used to overcome the forces keeping the graphene sheets together, and many of them are described in the Thesis. The most common chemical method is the oxidisation of graphite with strong oxidants, which creates a water-soluble graphene oxide. The properties of graphene oxide differ significantly from pristine graphene and, therefore, graphene oxide is often reduced to form materials collectively known as reduced graphene oxide. In the experimental part, the main focus is on the chemical and electrochemical reduction of graphene oxide. A novel chemical route using vanadium is introduced and compared to other common chemical graphene oxide reduction methods. A strong emphasis is placed on electrochemical reduction of graphene oxide in various solvents. Raman and infrared spectroscopy are both used in in situ spectroelectrochemistry to closely monitor the spectral changes during the reduction process. These in situ techniques allow the precise control over the reduction process and even small changes in the material can be detected. Graphene and few layer graphene were also prepared using a physical force to separate these materials from graphite. Special adsorbate molecules in aqueous solutions, together with sonic treatment, produce stable dispersions of graphene and few layer graphene sheets in water. This mechanical exfoliation method damages the graphene sheets considerable less than the chemical methods, although it suffers from a lower yield.

Reduction of nitrogen oxide emissions in lime kiln

Different nitrogen oxide removal technologies for rotary lime kiln are studied in this thesis, the main focus being in commercial technologies. Post-combustion methods are investigated in more detail as potential possible NOx removal with combustion methods in rotary lime kiln is more limited or primary methods are already in use. However, secondary methods as NOx scrubber, SNCR or SCR technologies are not listed as the Best Available Technologies defined by European Union. BAT technologies for NOx removal in lime kiln are (1) Optimised combustion and combustion control, (2) Good mixing of fuel and air, (3) Low-NOx burner and (4) Fuel selection/low-N fuel. SNCR method is the most suitable technique for NOx removal in lime kiln when NOx removal from 50 % to 70 % is required in case primary methods are already in use or cannot be applied. In higher removal cases ammonia slip is an issue in SNCR. By using SCR better NOx reduction can be achieved but issues with catalyst materials are expected to arise because of the dust and sulphur dioxide which leads to catalyst poison formation in lower flue gas temperatures. NOx scrubbing has potential when simultaneous NOx and SO2 removal is required. The challenge is that NO cannot be scrubbed directly, but once it is oxidized to NO2 or further scrubbing can be performed as the solubility of NO2 is higher. Commercial installations have not been made regarding SNCR, SCR or NOx scrubbing regarding rotary lime kiln. For SNCR and SCR the closest references come from cement industry.

Bariatric and Post-Bariatric Surgery: from Metabolic Surgery to Plastic Surgery Indications

Background: Controversy exists concerning indications and outcomes of major bariatric surgery procedures. Massive weight loss after bariatric surgery leads to excess skin with functional and aesthetic impairments. The aim of this study was to investigate the major bariatric surgery procedures and their outcomes in two specific subgroups of morbidly obese patients, ≥55-year-olds and the superobese. Further aims were to evaluate whether the preoperative weight loss correlates with laparoscopic gastric bypass complications. The prevalence and impact of excess skin and the desire for body contouring after bariatric surgery were also studied. Patients and Methods: Data from patients who underwent Laparoscopic Adjustable Gastric Banding (LAGB) and Laparoscopic Roux-en-Y Gastric Bypass (LRYGB) at Vaasa Central Hospital were collected and postoperative outcomes were evaluated according to the BMI, age and preoperative weight loss. Patients who had undergone bariatric surgery procedures were asked to complete a questionnaire to estimate any impairment due to redundant skin and to analyse each patient’s desire for body contouring by area. Results: No significant difference was found in operative time, hospital stay, or overall early postoperative morbidity between LAGB and LRYGB. Mean excess weight loss percents (EWL%) at 6 and 12 months after LRYGB were significantly higher. A significant difference was found in operative time favouring patients <55 years. Intraoperative complications were significantly more frequent in the group aged >55 years. No significant difference was detected in overall postoperative morbidity rates. A significant difference was found in operative time and hospital stay favouring all patients who lost weight preoperatively. Most patients reported problems with redundant skin, especially on the abdomen, upper arms and rear/buttocks, which impaired daily physical activity in half of them. Excess skin was significantly associated with female gender, weight loss and ΔBMI. Patients with a WL >20 kg, ΔBMI ≥10 kg/m2 and an EWL % > 50 showed a significantly surplus skin discomfort (p < 0.001). Most patients desired body contouring surgery, with high or very high desire for waist/abdomen (62.2%), upper arm (37.6%), chest/breast (28.3%), and rear/buttock (35.6%) contouring. Conclusions: LRYGB is effective and safe in superobese (BMI >50) and elderly (>55 years) patients. A preoperative weight loss >5% is recommended to improve the outcomes and reduce complications. A WL >20 kg, ΔBMI ≥10 kg/m2 and an EWL % > 50 are associated with a higher functional discomfort due to redundant skin and to a stronger desire for body contouring plastic surgery.

Natiivin Android-pelin käyttöliittymän skaalautuminen ja suorituskyvyn optimointi

Tässä työssä esiteltiin Android laitteisto- ja sovellusalustana sekä kuvattiin, kuinka Android-pelisovelluksen käyttöliittymä voidaan pitää yhtenäisenä eri näyttölaitteilla skaalauskertoimien ja ankkuroinnin avulla. Toisena osiona työtä käsiteltiin yksinkertaisia tapoja, joilla pelisovelluksien suorituskykyä voidaan parantaa. Näistä tarkempiin mittauksiin valittiin matalatarkkuuksinen piirtopuskuri ja näkymättömissä olevien kappaleiden piilotus. Mittauksissa valitut menetelmät vaikuttivat demosovelluksen suorituskykyyn huomattavasti. Tässä työssä rajauduttiin Android-ohjelmointiin Java-kielellä ilman ulkoisia kirjastoja, jolloin työn tuloksia voi helposti hyödyntää mahdollisimman monessa eri käyttökohteessa.

Asiakkaiden integroiminen osaksi tuotekehitysprosessia

Kandidaatin työ on tehty Lappeenrannan teknillisen yliopiston tuotantotalouden tiedekunnassa. Työn tarkoituksena on tarkastella kuinka asiakaslähtöinen tuotekehitys on kehittynyt viime vuosikymmeninä, selvittää millaisilla menetelmillä asiakkaita voidaan liittää osaksi tuotekehitysprosessia ja kartoittaa asiakkaiden integrointiin liittyviä riskejä. 1940-luvulta alkaen yritysten innovaatioprosessit ovat kehittyneet asiakaslähtöisempään suuntaan. Nykyään yrityksille on entistä tärkeämpää tarjota tuotteita, jotka parhaiten vastaavat asiakkaiden tarpeita. Asiakasymmärrystä tuotekehityksessä voidaan lisätä monella eri menetelmällä. Tässä työssä tarkastelemme menetelmistä lähemmin innovaatiopelejä sekä ketterästä ohjelmistokehityksestä ammentavaa extreme programming (XP) – menetelmää. Innovaatiopelit perustuvat yhdessä asiakkaiden kanssa pelattaviin jopa leikkimielisiin peleihin, joiden avulla asiakkaiden mielipiteet ja ideat tulevat kuulluiksi. XP-menetelmä taas perustuu iteratiivisuuteen, sillä asiakkaan palautteen perusteella kehitettävään tuotteeseen tehdään parannuksia, jonka jälkeen uusi prototyyppi esitellään asiakkaalle. Asiakaslähtöiseen tuotekehitykseen liittyy kuitenkin myös riskejä, kuten tietotaidon vuotamista. Riskejä voidaan kuitenkin hallita valitsemalla yhteistyökumppaninsa tarkkaan ja käyttämällä edelläkävijäkäyttäjiä (lead user) hyväkseen.

Congenital upper limb defects in Finland 1993-2005

Background: Interest in limb defects has grown after the thalidomide tragedy in the 1960s. As a result, congenital malformation registries, monitoring changes in birthprevalence and defect patterns, have been established in several countries. However, there are only a few true population based studies on birth prevalence of upper limb defects. The burden of hospital care among these children, specifically in terms of the number of admissions and total time spent in hospital, is also unknown. Aims and Methods: This study is based on information gathered from the Finnish Register of Congenital malformations (FRM) and the Finnish Hospital Discharge Register (FHDR). A total of 417 children born between 1993 and 2005 with an upper limb defect were gathered from the FRM. The upper limb defects were classified using the International Federation of Societies for Surgery of the Hand -classification that enables comparison with previous and future studies. Birth and live birth prevalence, sex and side distribution, frequency of associated anomalies as well as the proportion of perinatal and infant deaths according to the different subtypes were calculated. The number of hospital admissions, days spent in hospital, number and type of surgical operations were collected from the FHDR. Special features of two subgroups, radial ray defects (RRD) and constriction band syndrome (CBS), were explored. Results: Upper limb defects were observed in 417 of 753 342 consecutive births and in 392 of 750 461 live births. Birth prevalence was 5.5 per 10 000 births and 5.2 per 10 000 live births. Multiple anomalies or a known syndrome was found in 250 cases (60%). Perinatal mortality was 139 per 1000 births and infant mortality 135 per 1000 live births (overall Finnish perinatal mortality <5 per 1000 births and infant mortality 3.7 per 1000 live births). Altogether, 138 infants had RRD and 120 (87%) of these had either a known syndrome or multiple major anomalies. The proportion of perinatal deaths in RRD group was 29% (40/138) and infant deaths 35% (43/123). Fifty-one children had CBS in upper limbs. Fifteen of these (29%) had other major anomalies associated with constriction rings. The number of hospital admissions per year of children with congenital upper limb defects was 11-fold and the time spent in hospital 13-fold as compared with the general paediatric population. Conclusions: Birth prevalence of congenital upper limb defects was 5.5 per 10 000 births and 5.2 per 10 000 live births. RRD was especially associated with other major anomalies and high mortality. Nearly one third of the children with CBS also had other major anomalies suggesting different aetiologies inside the group. The annual burden of hospital care of children with congenital upper limb defects was at least 11-fold as compared with the general paediatric population.