Electronic and kinetic processes in the Cu/CuCl double pulse laser

Kinetic and electronic processes in a Cu/CuCl double pulsed laser were investigated by measuring discharge and laser pulse characteristics, and by computer modeling. There are two time scales inherent to the operation of the Cu/CuCl laser. The first is during the interpulse afterglow (tens to hundreds of microseconds). The second is during the pumping pulse (tens of nanoseconds). It was found that the character of the pumping pulse is largely determined by the initial conditions provided by the interpulse afterglow. By tailoring the dissociation pulse to be long and low energy, and by conditioning the afterglow, one may select the desired initial conditions and thereby significantly improve laser performance. With a low energy dissociation pulse, the fraction of metastable copper obtained from a CuCl dissociation is low. By maintaining the afterglow, contributions to the metastable state from ion recombinations are prevented, and the plasma impedance remains low thereby increasing the rate of current rise during the pumping pulse. Computer models for the dissociation pulse, afterglow, pumping pulse and laser pulse reproduced experimentally observed behavior of laser pulse energy and power as a function of time delay, pumping pulse characteristics, and buffer gas pressure. The sensitivity of laser pulse properties on collisional processes (e.g., CuCl reassociation rates) was investigated.

Temperature dependence of dark lines in coherent population trapping

We measure the signal amplitude and linewidth of a dark line in coherent population trapping in the Rb vapour cell filled with mixed buffer gas N-2 and Ar as a function of cell temperature. We find that the dark line signal amplitude increases with temperature up to a maximum at 49 degrees C and then drops at higher temperatures due to quenching effects of N-2. The linewidth of the dark line remains basically constant, at 1080 Hz. We also measure the linewidth of the dark line as a function of laser intensity. The linewidth increases linearly with laser intensity. An intrinsic linewidth (FWHM=896 Hz at 3.4 GHz) of the Rb cell is obtained.

Anisotropic diffraction of stratified volume holographic grating in photorefractive media

We have studied the anisotropic diffraction properties of the stratified volume holographic gratings recorded in photorefractive media using the anisotropic coupled wave theory. It is shown that the diffraction efficiency of such system exhibit the uniform periodic Bragg selectivity properties. In addition the dependence of the stratified volume holographic optical elements (SVHOEs) diffraction properties on the buffer-layer thickness, grating-layer thickness, number of modulation layers, and total thickness of system are discussed in detail. (c) 2005 Elsevier GrnbH. All rights reserved.

Enzyme induction in Neurospora crassa

I. Studies on Nicotinamide Adenine Dinucleotide Glycohydrase (NADase)

NADase, like tyrosinase and L-amino acid oxidase, is not present in two day old cultures of wild type Neurospora, but it is coinduced with those two enzymes during starvation in phosphate buffer. The induction of NADase, like tyrosinase, is inhibited by puromycin. The induction of all three enzymes is inhibited by actinomycin D. These results suggest that NADase is synthesized de novo during induction as has been shown directly for tyrosinase. NADase induction differs in being inhibited by certain amino acids.

The tyrosinaseless mutant ty-1 contains a non-dialyzable, heat labile inhibitor of NADase. A new mutant, P110A, synthesizes NADase and L-amino acid oxidase while growing. A second strain, pe, fl;cot, makes NADase while growing. Both strains can be induced to make the other enzymes. These two strains prove that the control of these three enzymes is divisible. The strain P110A makes NADase even when grown in the presence of Tween 80. The synthesis of both NADase and L-amino acid oxidase by P110A is suppressed by complete medium. The theory of control of the synthesis of the enzymes is discussed.

II. Studies with EDTA

Neurospora tyrosinase contains copper but, unlike other phenol oxidases, this copper has never been removed reversibly. It was thought that the apo-enzyme might be made in vivo in the absence of copper. Therefore cultures were treated with EDTA to remove copper before the enzyme was induced. Although no apo-tyrosinase was detected, new information on the induction process was obtained.

A treatment of Neurospora with 0.5% EDTA pH 7, inhibits the subsequent induction during starvation in phosphate buffer of tyrosinase, L-amino acid oxidase and NADase. The inhibition of tyrosinase and L-amino acid oxidase induction is completely reversed by adding 5 x 10^-5M CaCl₂, 5 x 10^-4M CuSO₄, and a mixture of L-amino acids (2 x 10^-3M each) to the buffer. Tyrosinase induction is also fully restored by 5 x 10^-4M CaCl₂ and amino acids. As yet NADase has been only partially restored.

The copper probably acts by sequestering EDTA left in the mycelium and may be replaced by nickel. The EDTA apparently removes some calcium from the mycelium, which the added calcium replaces. Magnesium cannot replace calcium. The amino acids probably replace endogenous amino acids lost to the buffer after the EDTA treatment.

The EDTA treatment also increases permeability, thereby increasing the sensitivity of induction to inhibition by actinomycin D and allowing cell contents to be lost to the induction buffer. EDTA treatment also inhibits the uptake of exogenous amino acids and their incorporation into proteins.

The lag period that precedes the first appearance of tyrosinase is demonstrated to be a separate dynamic phase of induction. It requires oxygen. It is inhibited by EDTA, but can be completed after EDTA treatment in the presence of 5 x 10^-5M CaCl₂ alone, although no tyrosinase is synthesized under these conditions.

The time course of induction has an early exponential phase suggesting an autocatalytic mechanism of induction.

The mode of action of EDTA, the process of induction and the kinetics of induction are discussed.

Heteroepitaxy of Group IV and Group III-V semiconductor alloys for photovoltaic applications

Photovoltaic energy conversion represents a economically viable technology for realizing collection of the largest energy resource known to the Earth -- the sun. Energy conversion efficiency is the most leveraging factor in the price of energy derived from this process. This thesis focuses on two routes for high efficiency, low cost devices: first, to use Group IV semiconductor alloy wire array bottom cells and epitaxially grown Group III-V compound semiconductor alloy top cells in a tandem configuration, and second, GaP growth on planar Si for heterojunction and tandem cell applications.

Metal catalyzed vapor-liquid-solid grown microwire arrays are an intriguing alternative for wafer-free Si and SiGe materials which can be removed as flexible membranes. Selected area Cu-catalyzed vapor-liquid solid growth of SiGe microwires is achieved using chlorosilane and chlorogermane precursors. The composition can be tuned up to 12% Ge with a simultaneous decrease in the growth rate from 7 to 1 μm/min^-1. Significant changes to the morphology were observed, including tapering and faceting on the sidewalls and along the lengths of the wires. Characterization of axial and radial cross sections with transmission electron microscopy revealed no evidence of defects at facet corners and edges, and the tapering is shown to be due to in-situ removal of catalyst material during growth. X-ray diffraction and transmission electron microscopy reveal a Ge-rich crystal at the tip of the wires, strongly suggesting that the Ge incorporation is limited by the crystallization rate.

Tandem Ga_1-xIn_xP/Si microwire array solar cells are a route towards a high efficiency, low cost, flexible, wafer-free solar technology. Realizing tandem Group III-V compound semiconductor/Si wire array devices requires optimization of materials growth and device performance. GaP and Ga_1-xIn_xP layers were grown heteroepitaxially with metalorganic chemical vapor deposition on Si microwire array substrates. The layer morphology and crystalline quality have been studied with scanning electron microscopy and transmission electron microscopy, and they provide a baseline for the growth and characterization of a full device stack. Ultimately, the complexity of the substrates and the prevalence of defects resulted in material without detectable photoluminescence, unsuitable for optoelectronic applications.

Coupled full-field optical and device physics simulations of a Ga_0.51In_0.49P/Si wire array tandem are used to predict device performance. A 500 nm thick, highly doped "buffer" layer between the bottom cell and tunnel junction is assumed to harbor a high density of lattice mismatch and heteroepitaxial defects. Under simulated AM1.5G illumination, the device structure explored in this work has a simulated efficiency of 23.84% with realistic top cell SRH lifetimes and surface recombination velocities. The relative insensitivity to surface recombination is likely due to optical generation further away from the free surfaces and interfaces of the device structure.

Finally, GaP has been grown free of antiphase domains on Si (112) oriented substrates using metalorganic chemical vapor deposition. Low temperature pulsed nucleation is followed by high temperature continuous growth, yielding smooth, specular thin films. Atomic force microscopy topography mapping showed very smooth surfaces (4-6 Å RMS roughness) with small depressions in the surface. Thin films (~ 50 nm) were pseudomorphic, as confirmed by high resolution x-ray diffraction reciprocal space mapping, and 200 nm thick films showed full relaxation. Transmission electron microscopy showed no evidence of antiphase domain formation, but there is a population of microtwin and stacking fault defects.

Solubility and Diffusivity of Water in Lunar Basalt, and Chemical Zonation in Olivine-Hosted Melt Inclusions

I report the solubility and diffusivity of water in lunar basalt and an iron-free basaltic analogue at 1 atm and 1350 °C. Such parameters are critical for understanding the degassing histories of lunar pyroclastic glasses. Solubility experiments have been conducted over a range of fO₂ conditions from three log units below to five log units above the iron-wüstite buffer (IW) and over a range of pH₂/pH₂O from 0.03 to 24. Quenched experimental glasses were analyzed by Fourier transform infrared spectroscopy (FTIR) and secondary ionization mass spectrometry (SIMS) and were found to contain up to ~420 ppm water. Results demonstrate that, under the conditions of our experiments: (1) hydroxyl is the only H-bearing species detected by FTIR; (2) the solubility of water is proportional to the square root of pH₂O in the furnace atmosphere and is independent of fO₂ and pH₂/pH₂O; (3) the solubility of water is very similar in both melt compositions; (4) the concentration of H₂ in our iron-free experiments is <3 ppm, even at oxygen fugacities as low as IW-2.3 and pH₂/pH₂O as high as 24; and (5) SIMS analyses of water in iron-rich glasses equilibrated under variable fO₂ conditions can be strongly influenced by matrix effects, even when the concentrations of water in the glasses are low. Our results can be used to constrain the entrapment pressure of the lunar melt inclusions of Hauri et al. (2011).

Diffusion experiments were conducted over a range of fO₂ conditions from IW-2.2 to IW+6.7 and over a range of pH₂/pH₂O from nominally zero to ~10. The water concentrations measured in our quenched experimental glasses by SIMS and FTIR vary from a few ppm to ~430 ppm. Water concentration gradients are well described by models in which the diffusivity of water (D^*_water) is assumed to be constant. The relationship between D^*_water and water concentration is well described by a modified speciation model (Ni et al. 2012) in which both molecular water and hydroxyl are allowed to diffuse. The success of this modified speciation model for describing our results suggests that we have resolved the diffusivity of hydroxyl in basaltic melt for the first time. Best-fit values of D^*_water for our experiments on lunar basalt vary within a factor of ~2 over a range of pH₂/pH₂O from 0.007 to 9.7, a range of fO₂ from IW-2.2 to IW+4.9, and a water concentration range from ~80 ppm to ~280 ppm. The relative insensitivity of our best-fit values of D^*_water to variations in pH₂ suggests that H₂ diffusion was not significant during degassing of the lunar glasses of Saal et al. (2008). D^*_water during dehydration and hydration in H₂/CO₂ gas mixtures are approximately the same, which supports an equilibrium boundary condition for these experiments. However, dehydration experiments into CO₂ and CO/CO₂ gas mixtures leave some scope for the importance of kinetics during dehydration into H-free environments. The value of D^*_water chosen by Saal et al. (2008) for modeling the diffusive degassing of the lunar volcanic glasses is within a factor of three of our measured value in our lunar basaltic melt at 1350 °C.

In Chapter 4 of this thesis, I document significant zonation in major, minor, trace, and volatile elements in naturally glassy olivine-hosted melt inclusions from the Siqueiros Fracture Zone and the Galapagos Islands. Components with a higher concentration in the host olivine than in the melt (MgO, FeO, Cr₂O₃, and MnO) are depleted at the edges of the zoned melt inclusions relative to their centers, whereas except for CaO, H₂O, and F, components with a lower concentration in the host olivine than in the melt (Al₂O₃, SiO₂, Na₂O, K₂O, TiO₂, S, and Cl) are enriched near the melt inclusion edges. This zonation is due to formation of an olivine-depleted boundary layer in the adjacent melt in response to cooling and crystallization of olivine on the walls of the melt inclusions concurrent with diffusive propagation of the boundary layer toward the inclusion center.

Concentration profiles of some components in the melt inclusions exhibit multicomponent diffusion effects such as uphill diffusion (CaO, FeO) or slowing of the diffusion of typically rapidly diffusing components (Na₂O, K₂O) by coupling to slow diffusing components such as SiO₂ and Al₂O₃. Concentrations of H2O and F decrease towards the edges of some of the Siqueiros melt inclusions, suggesting either that these components have been lost from the inclusions into the host olivine late in their cooling histories and/or that these components are exhibiting multicomponent diffusion effects.

A model has been developed of the time-dependent evolution of MgO concentration profiles in melt inclusions due to simultaneous depletion of MgO at the inclusion walls due to olivine growth and diffusion of MgO in the melt inclusions in response to this depletion. Observed concentration profiles were fit to this model to constrain their thermal histories. Cooling rates determined by a single-stage linear cooling model are 150–13,000 °C hr^-1 from the liquidus down to ~1000 °C, consistent with previously determined cooling rates for basaltic glasses; compositional trends with melt inclusion size observed in the Siqueiros melt inclusions are described well by this simple single-stage linear cooling model. Despite the overall success of the modeling of MgO concentration profiles using a single-stage cooling history, MgO concentration profiles in some melt inclusions are better fit by a two-stage cooling history with a slower-cooling first stage followed by a faster-cooling second stage; the inferred total duration of cooling from the liquidus down to ~1000 °C is 40 s to just over one hour.

Based on our observations and models, compositions of zoned melt inclusions (even if measured at the centers of the inclusions) will typically have been diffusively fractionated relative to the initially trapped melt; for such inclusions, the initial composition cannot be simply reconstructed based on olivine-addition calculations, so caution should be exercised in application of such reconstructions to correct for post-entrapment crystallization of olivine on inclusion walls. Off-center analyses of a melt inclusion can also give results significantly fractionated relative to simple olivine crystallization.

All melt inclusions from the Siqueiros and Galapagos sample suites exhibit zoning profiles, and this feature may be nearly universal in glassy, olivine-hosted inclusions. If so, zoning profiles in melt inclusions could be widely useful to constrain late-stage syneruptive processes and as natural diffusion experiments.

The ionic basis of frequency selectivity in hair cells of the bullfrog's sacculus

Hair cells from the bull frog's sacculus, a vestibular organ responding to substrate-borne vibration, possess electrically resonant membrane properties which maximize the sensitivity of each cell to a particular frequency of mechanical input. The electrical resonance of these cells and its underlying ionic basis were studied by applying gigohm-seal recording techniques to solitary hair cells enzymatically dissociated from the sacculus. The contribution of electrical resonance to frequency selectivity was assessed from microelectrode recordings from hair cells in an excised preparation of the sacculus.

Electrical resonance in the hair cell is demonstrated by damped membrane-potential oscillations in response to extrinsic current pulses applied through the recording pipette. This response is analyzed as that of a damped harmonic oscillator. Oscillation frequency rises with membrane depolarization, from 80-160 Hz at resting potential to asymptotic values of 200-250 Hz. The sharpness of electrical tuning, denoted by the electrical quality factor, Q_e, is a bell-shaped function of membrane voltage, reaching a maximum value around eight at a membrane potential slightly positive to the resting potential.

In whole cells, three time-variant ionic currents are activated at voltages more positive than -60 to -50 mV; these are identified as a voltage-dependent, non-inactivating Ca current (I_ca), a voltage-dependent, transient K current (I_a), and a Ca-dependent K current (I_c). The C channel is identified in excised, inside-out membrane patches on the basis of its large conductance (130-200 pS), its selective permeability to Kover Na or Cl, and its activation by internal Ca ions and membrane depolarization. Analysis of open- and closed-lifetime distributions suggests that the C channel can assume at least two open and three closed kinetic states.

Exposing hair cells to external solutions that inhibit the Ca or C conductances degrades the electrical resonance properties measured under current-clamp conditions, while blocking the A conductance has no significant effect, providing evidence that only the Ca and C conductances participate in the resonance mechanism. To test the sufficiency of these two conductances to account for electrical resonance, a mathematical model is developed that describes I_ca, I_c, and intracellular Ca concentration during voltage-clamp steps. I_ca activation is approximated by a third-order Hodgkin-Huxley kinetic scheme. Ca entering the cell is assumed to be confined to a small submembrane compartment which contains an excess of Ca buffer; Ca leaves this space with first-order kinetics. The Ca- and voltage-dependent activation of C channels is described by a five-state kinetic scheme suggested by the results of single-channel observations. Parameter values in the model are adjusted to fit the waveforms of I_ca and I_c evoked by a series of voltage-clamp steps in a single cell. Having been thus constrained, the model correctly predicts the character of voltage oscillations produced by current-clamp steps, including the dependencies of oscillation frequency and Q_e on membrane voltage. The model shows quantitatively how the Ca and C conductances interact, via changes in intracellular Ca concentration, to produce electrical resonance in a vertebrate hair cell.

Análise comparativa dos instrumentos de gestão em Unidades de Conservação visando a gestão participativa no Cone Sul

A influência humana sobre as unidades de conservação (UCs) deve ser considerada a partir de modelos mais amplos, entendendo que há influência dos processos sociais nas mesmas e que essa é uma dimensão a ser discutida no âmbito das práticas de proteção da natureza. É importante que seja levado em consideração na criação, na ampliação e na gestão de uma UC a participação dos atores envolvidos direta e indiretamente, já que o quadro mundial indica ser uma tendência a criação de novas áreas e o envolvimento da sociedade neste processo. Ante esta realidade objetivou-se, nesta tese, contribuir para o fortalecimento da gestão participativa em UCs no Cone Sul, aqui definido como o conjunto de quatro países: Brasil, Argentina, Uruguai e Chile e tendo como estudo de caso quatro áreas protegidas: Parque Nacional do Itatiaia - Brasil, Parque Nacional Lago Puelo - Argentina, Santuário da Natureza Parque Pumalín - Chile e Paisagem Protegida Lagoa de Rocha Uruguai. Tendo por base os instrumentos de gestão em unidades de conservação no Brasil: plano de manejo, zona de amortecimento, educação ambiental e conselho gestor e sendo os mesmos determinados por normas legais (Leis, Decretos, Resoluções, Instruções Normativas) tais normas foram analisadas e comparadas com a finalidade de averiguar se nos países estudados estes instrumentos eram determinados legalmente, da mesma forma como são no Brasil, bem como se a vertente participativa estava presente nesta determinação. Após verificou-se se na Argentina, no Uruguai e no Chile havia a aplicação dos mesmos instrumentos de gestão em áreas protegidas que no Brasil; bem como foi averiguada a situação dos mesmos nos estudos de caso tendo por base a vertente participativa. Depois houve a contextualização e apresentação das dificuldades na gestão e das pressões sofridas pelas áreas protegidas buscando trazer à tona a realidade em que estão inseridas e das quais compartilham. Para tanto se utilizou de levantamentos bibliográficos, documentais, entrevistas semi-estruturadas com pessoas que tiveram experiências práticas com o problema pesquisado e os estudos de caso. Constatou-se que a determinação legal de instrumentos que propiciem a participação não é, via de regra, essencial para efetivar a gestão participativa da UC, mas a existência dos mesmos sim. Verificou-se que um bom resultado está atrelado às qualidades técnicas e subjetivas da gestão e também dos gestores, que podem ajudar e muito na gestão participativa, juntamente com uma parceria bem fortalecida.

Demonstration of GaN/InGaN light emitting diodes on (100) beta-Ga2O3 substrates by metalorganic chemical vapour deposition

The growth and fabrication of GaN/InGaN multiple quantum well (MQW) light emitting diodes ( LEDs) on ( 100) beta-Ga2O3 single crystal substrates by metal-organic chemical vapour deposition (MOCVD) technique are reported. x-ray diffraction (XRD) theta-2 theta. scan spectroscopy is carried out on the GaN buffer layer grown on a ( 100) beta-Ga2O3 substrate. The spectrum presents several sharp peaks corresponding to the ( 100) beta-Ga2O3 and ( 004) GaN. High-quality ( 0002) GaN material is obtained. The emission characteristics of the GaN/InGaN MQW LED are measurement. The first green LED on beta-Ga2O3 with vertical current injection is demonstrated.

Structural and optical properties of a-plane ZnO thin films synthesized on γ-LiAlO2 (302) substrates by low pressure metal-organic chemical vapor deposition

Nonpolar a-plane (1120) ZnO thin films have been fabricated on gamma-LiAlO2 (302) substrates via the low-pressure metal-organic chemical vapor deposition. An obvious intensity variation of the E-2 mode in the Raman spectra indicates that there exhibits in-plane optical anisotropy in the a-plane ZnO thin films. Highly-oriented uniform grains of rectangular shape can be seen from the atomic force microscopy images, which mean that the lateral growth rate of the thin films is also anisotropic. It is demonstrated experimentally that a buffer layer deposited at a low temperature (200 degrees C) can improve the structural and optical properties of the epilayer to a large extent. (c) 2007 Elsevier B.V. All rights reserved.

Enhancement of near-band-edge photoluminescence of ZnO thin films in sandwich configuration at room temperature

ZnO/ITO/ZnO sandwich structure films were fabricated. The effects of buffer layer on the structure and optical properties of ZnO films were investigated by x-ray diffraction (XRD), photoluminescence, optical transmittance, and absorption measurements. XRD spectra indicate that a buffer layer has the effects of lowering the grain orientation of ZnO films and increasing the residual stresses in the films. The near-band-edge emissions of ZnO films deposited on both single indium tin oxide (ITO) buffer and ITO/ZnO double buffers are significantly enhanced compared with that deposited on a bare substrate due to the quantum confinement effect. (C) 2006 American Institute of Physics.

Alterações histopatológicas pancreáticas, placentárias e na matriz extracelular hipofisária durante a diabetes mellitus gestacional

A Diabetes Mellitus Gestacional (DMG) pode ser definida como intolerância a carboidrato durante a gravidez e estima-se que pode afetar 10-22% de todas as pacientes grávidas. Durante a gravidez podem surgir diversas complicações para o feto como risco elevado de aborto espontâneo, anormalidades congênitas e morbidade e mortalidade neonatal. Entretanto, podem surgir também alterações morfofuncionais em diversos órgãos da mãe diabética, porém isso não é bem estabelecido. Investigar se haverá ou não alterações bioquímicas e histopatológicas em diversos órgãos, como hipófise, útero, placenta e pâncreas de ratas grávidas com diabetes mellitus durante e no final da gravidez e compará-las . Além disso, investigar se há alteração na matriz extracelular (MEC) da hipófise desses animais. No 5 dia de vida, ratas Wistar foram divididas em dois grupos: um tratado com estreptozotocina (Grupo Diabético / DIAB), na dose de 90 mg/kg, subcutâneo e outro grupo, que foi tratado com veículo (tampão citrato/CTR). Aos 90 dias de vidas, foram submetidas ao cruzamento. Após isso, foram sacrificadas no 11 e 21 dia de gravidez. Foram avaliados glicemia e bioquímica maternal e número de implantes .O pâncreas, útero, placenta e hipófises foram coradas com Hematoxilina e Eosina e somente as hipófises foram coradas com Massom e Picrosirius, para avaliação da MEC.Os animais diabéticos tanto do 11 quanto do 21 dia apresentaram uma redução no número de implantes, menor peso e maior glicemia e colesterol total, em relação aos animais controle independente do dia da gravidez. Não foi verificada diferença dos níveis de triglicerídeos entre os grupos não diabéticos e diabéticos, independente dos dias. Entretanto, os animais diabéticos que finalizaram o período de gestação apresentaram uma maior glicemia maternal em relação ao grupo diabético do 11 dia. Pâncreas de ratas diabéticas do 21 dia apresentaram vacuolização intracitoplasmática das ilhotas, insulite,migração de células inflamatórias, espessamento da parede do vaso e fibrose periductal e vascular. Essas alterações foram verificadas com bem menor intensidade nos animais diabéticos do 11 dia. Foi verificado que a placenta de animais diabéticos apresenta congestão na interface materno-fetal, migração celular, maior concentração de vasos maternos e fetais, mas em forma irregular , necrose e vacuolização. A hipófise de animais diabéticos mostraram células cromófobas agregadas, aumento da espessura de fibras de colágeno vermelhas da MEC, em contraste com o controle, que foi visualizado fibras em verde e em formato de feixe. A diabetes desempenhou um total remodelamento da hipófise. Gravidez de animais diabeticos mostraram maior dano ao pâncreas e placenta, especialmente no final da gravidez. Em consequência dessa alterações, esses animais diabéticos apresentaram hiperglicemia, maior colesterol total, porém menor peso materno, número de implantes e sem alterações nos triglicerídeos. Esse é o primeiro estudo a demonstrar remodelamento tecidual em alguns elementos da MEC na hipófise, como espessamento da camada da MEC e fibras de colágeno em verde. Alterações da MEC da hipófise são provavelmente devido ao processo de diabetes na gestação.

Aquaculture vis-a-vis agriculture

The effect of aquaculture, especially shrimp farming, on agriculture has caused heated debate among aquaculturists, agriculturists, and non-governmental organizations. As data on the negative impact of shrimp farming on adjacent rice fields are not available, a study was undertaken in rice fields skirting three shrimp farms: a semi-intensive farm; an extensive farm; and a semi-intensive farm with a buffer zone. The buffer zone was found to be helpful in preventing salinization of the adjacent agricultural fields and the Electrical Conductivity (EC) values (less than 1) reported were found to be harmless to the rice crop. Thus, aquaculture and agriculture can coexist in coastal areas if there are buffer zones in between.

Análise da vulnerabilidade socioambiental na Zona de amortecimento do Parque Estadual do Ibitipoca (MG), por geoprocessamento: contribuindo no apoio à tomada de decisão.

Conservar as últimas florestas tropicais é uma preocupação mundial, e como formas de proteção legal são criadas Unidades de Conservação (UCs), dedicadas para a preservação e manutenção da biodiversidade e recursos naturais. O entorno das áreas protegidas também são locais amparados pela lei e as atividades nelas devem ser restritas, a fim de não gerar impacto sobre a UC. O Parque Estadual do Ibitipoca, localizado em Minas Gerais, possui uma zona de amortecimento (ZA) de 100,41 km que pertence aos municípios de Lima Duarte, Santa Rita do Ibitipoca e Bias Fortes. O presente trabalho, portanto, visa caracterizar a vulnerabilidade socioambiental na zona de amortecimento do Parque Estadual do Ibitipoca (PEI), utilizando para tal, técnicas de geoprocessamento. Para chegar ao resultado final foi feito uma análise da vulnerabilidade social da ZA, utilizando dados do censo de infraestrutura (água, esgoto e lixo) e renda per capita; e para a vulnerabilidade ambiental foi realizado a sobreposição dos mapas de uso da terra, declividade e tipos de solos. Esses dados foram tratados no programa ArcGis, através da análise multicritério e seguindo a metodologia proposta por Moura (2007). O mapa de vulnerabilidade socioambiental possibilitou apontar os locais que necessitam de maiores cuidados e investimento, auxiliando assim os gestores do Parque no manejo e preservação da ZA. Os processos adotados nesta pesquisa permitiram a geração de um banco de dados georreferenciado, que será disponibilizado aos gestores, à população do entorno e à comunidade técnico-científica.

Cypermethrin use in forestry and its impact on Welsh streams: An evaluation of the impact of cypermethrin use in forestry on Welsh streams

This is the Evaluation of the impact of cypermethrin use in forestry on Welsh streams from the University of Plymouth, published on September 2010 by the Environment Agency South West. The report focuses attention on Cypermethrin, a highly active synthetic pyrethroid insecticide effective against a wide range of pests in agriculture, public health, and animal husbandry. It is also used in forestry to control the pine weevil, Hylobius abietis. Cypermethrin is very toxic to aquatic invertebrates and fish at nanogram per litre concentrations. This project checks the effectiveness of current best practice measures in minimising the risk of pollution associated with the use of cypermethrin in forestry in Wales. Chemical results from the intensive studies show that cypermethrin entered minor watercourses draining treated areas at two of the eight sites. In one of these cases the level was well in excess of the short-term Predicted No Effect Concentration. The absence of a buffer area at the other site resulted in the cypermethrin reaching a main drain. However dilution appeared to be sufficient to prevent any impact on water quality or on the invertebrate community in the main stream. Invertebrate and chemical data from the extensive survey showed little evidence of pollution due to wider use of cypermethrin in Welsh forestry. Finally, a number of recommendations are made for further tightening controls on forestry practice to minimise the risk of cypermethrin entering the aquatic environment.