999 resultados para tamanho de amostra
Resumo:
Com a realização deste trabalho pretendeu-se estabelecer o perfil urinário de níveis de biomarcadores do stress oxidativo (5-HMU; UAc; MDA; 8-OHdG) em indivíduos saudáveis (grupo controlo) comparando com o de doenças cardiovasculares (grupo CVD) de modo a avaliar o seu potencial como possíveis biomarcadores da possibilidade de ocorrência de CVD. A extração dos compostos alvos foi realizada por recurso a uma nova técnica extrativa - microextração com adsorvente empacotado em seringa (MEPS) controlada digitalmente (eVol). A análise dos biomarcadores foi efetuada por cromatografia líquida de ultra eficiência (UHPLC) utilizando como coluna analítica a HSS T3 (100 mm × 2,1 mm, 1,7 μm de tamanho da partícula) e com um sistema deteção de fotodiodos (PDA). Otimizaram-se os parâmetros experimentais com influência no processo extrativo, nomeadamente no que se refere ao tipo de adsorvente, á influência do pH, ao volume de amostra, ao número de ciclos extrativos, lavagem e ao volume de eluição. Foram ensaiadas diferentes condições experimentais e selecionadas as que corresponderam a uma maior eficiência extrativa, expressa pela área total relativa dos analitos e reprodutibilidade. Os melhores resultados foram obtidos usando como adsorvente C8, o pH da amostra ajustado a 6, o adsorvente foi carregado com 5x50 μL de amostra e a eluição com 1x50 μL de 0,01% ácido formico e 3x50 μL de 20% metanol. Para a separação cromatográfica dos analitos usou-se uma fase móvel binária (0,01% ácido fórmico:20% metanol), em modo isocrático e um fluxo de 250 μL min-1. O método analítico foi validado em termos de seletividade, linearidade, limite de deteção (LOD), limite de quantificação (LOQ), efeito matriz, exatidão e precisão (intra e interdias) e aplicada a determinação de biomarcadores alvo nos dois grupos estudados, obtiveram-se bons resultados em termos seletividade e linearidade (R2>0,9906), os valores de LOD e LOQ obtidos foram baixos, variando entre 0,00005 - 0,72 μg mL-1 e 0,00023 – 2,31 μg mL-1 respetivamente. Os resultados da percentagem de recuperação (91,06 – 123,02 %), precisão intra-dia (0,95 – 8,34 %), precisão inter-dia (4,58 -6,33 %) e o efeito de matriz (60,11 – 110,29 %) deste método foram satisfatórios. A aplicação da metodologia validada aos dois grupos em estudo permitiu concluir que as concentrações de UAc e MDA entre os dois grupos, contrariamente ao 5-HMU e ao 8- OhdG cujas concentrações são estatisticamente diferentes entre o grupo controlam e o grupo CVD.
Resumo:
The objective is to analyze the relationship between risk and number of stocks of a portfolio for an individual investor when stocks are chosen by "naive strategy". For this, we carried out an experiment in which individuals select actions to reproduce this relationship. 126 participants were informed that the risk of first choice would be an asset average of all standard deviations of the portfolios consist of a single asset, and the same procedure should be used for portfolios composed of two, three and so on, up to 30 actions . They selected the assets they want in their portfolios without the support of a financial analysis. For comparison we also tested a hypothetical simulation of 126 investors who selected shares the same universe, through a random number generator. Thus, each real participant is compensated for random hypothetical investor facing the same opportunity. Patterns were observed in the portfolios of individual participants, characterizing the curves for the components of the samples. Because these groupings are somewhat arbitrary, it was used a more objective measure of behavior: a simple linear regression for each participant, in order to predict the variance of the portfolio depending on the number of assets. In addition, we conducted a pooled regression on all observations by analyzing cross-section. The result of pattern occurs on average but not for most individuals, many of which effectively "de-diversify" when adding seemingly random bonds. Furthermore, the results are slightly worse using a random number generator. This finding challenges the belief that only a small number of titles is necessary for diversification and shows that there is only applicable to a large sample. The implications are important since many individual investors holding few stocks in their portfolios
Resumo:
This study aims to investigate the influence of the asset class and the breakdown of tangibility as determinant factors of the capital structure of companies listed on the BM & FBOVESPA in the period of 2008-2012. Two current assets classes were composed and once they were grouped by liquidity, they were also analyzed by the financial institutions for credit granting: current resources (Cash, Bank and Financial Applications) and operations with duplicates (Stocks and Receivables). The breakdown of the tangible assets was made based on its main components provided as warrantees for loans like Machinery & Equipment and Land & Buildings. For an analysis extension, three metrics for leverage (accounting, financial and market) were applied and the sample was divided into economic sectors, adopted by BM&FBOVESPA. The data model in dynamic panel estimated by a systemic GMM of two levels was used in this study due its strength to problems of endogenous relationship as well as the omitted variables bias. The found results suggest that current resources are determinants of the capital structure possibly because they re characterized as proxies for financial solvency, being its relationship with debt positive. The sectorial analysis confirmed the results for current resources. The tangibility of assets has inverse proportional relationship with the leverage. As it is disintegrated in its main components, the significant and negative influence of machinery & equipment was more marked in the Industrial Goods sector. This result shows that, on average, the most specific assets from operating activities of a company compete for a less use of third party resources. As complementary results, it was observed that the leverage has persistence, which is linked with the static trade-off theory. Specifically for financial leverage, it was observed that the persistence is relevant when it is controlled for the lagged current assets classes variables. The proxy variable for growth opportunities, measured by the Market -to -Book, has the sign of its contradictory coefficient. The company size has a positive relationship with debt, in favor of static trade-off theory. Profitability is the most consistent variable in all the performed estimations, showing strong negative and significant relationship with leverage, as the pecking order theory predicts
Resumo:
Na unfolding method of linear intercept distributions and secction área distribution was implemented for structures with spherical grains. Although the unfolding routine depends on the grain shape, structures with spheroidal grains can also be treated by this routine. Grains of non-spheroidal shape can be treated only as approximation. A software was developed with two parts. The first part calculates the probability matrix. The second part uses this matrix and minimizes the chi-square. The results are presented with any number of size classes as required. The probability matrix was determined by means of the linear intercept and section area distributions created by computer simulation. Using curve fittings the probability matrix for spheres of any sizes could be determined. Two kinds of tests were carried out to prove the efficiency of the Technique. The theoretical tests represent ideal cases. The software was able to exactly find the proposed grain size distribution. In the second test, a structure was simulated in computer and images of its slices were used to produce the corresponding linear intercept the section area distributions. These distributions were then unfolded. This test simulates better reality. The results show deviations from the real size distribution. This deviations are caused by statistic fluctuation. The unfolding of the linear intercept distribution works perfectly, but the unfolding of section area distribution does not work due to a failure in the chi-square minimization. The minimization method uses a matrix inversion routine. The matrix generated by this procedure cannot be inverted. Other minimization method must be used
Resumo:
Metal powder sintering appears to be promising option to achieve new physical and mechanical properties combining raw material with new processing improvements. It interest over many years and continue to gain wide industrial application. Stainless steel is a widely accepted material because high corrosion resistance. However stainless steels have poor sinterability and poor wear resistance due to their low hardness. Metal matrix composite (MMC) combining soft metallic matrix reinforced with carbides or oxides has attracted considerable attention for researchers to improve density and hardness in the bulk material. This thesis focuses on processing 316L stainless steel by addition of 3% wt niobium carbide to control grain growth and improve densification and hardness. The starting powder were water atomized stainless steel manufactured for Höganäs (D 50 = 95.0 μm) and NbC produced in the UFRN and supplied by Aesar Alpha Johnson Matthey Company with medium crystallite size 16.39 nm and 80.35 nm respectively. Samples with addition up to 3% of each NbC were mixed and mechanically milled by 3 routes. The route1 (R1) milled in planetary by 2 hours. The routes 2 (R2) and 3 (R3) milled in a conventional mill by 24 and 48 hours. Each milled samples and pure sample were cold compacted uniaxially in a cylindrical steel die (Ø 5 .0 mm) at 700 MPa, carried out in a vacuum furnace, heated at 1290°C, heating rate 20°C stand by 30 and 60 minutes. The samples containing NbC present higher densities and hardness than those without reinforcement. The results show that nanosized NbC particles precipitate on grain boundary. Thus, promote densification eliminating pores, control grain growth and increase the hardness values
Resumo:
Titanium nitride films were grown on glass using the Cathodic Cage Plasma Deposition technique in order to verify the influence of process parameters in optical and structural properties of the films. The plasma atmosphere used was a mixture of Ar, N2 and H2, setting the Ar and N2 gas flows at 4 and 3 sccm, respectively and H2 gas flow varied from 0, 1 to 2 sccm. The deposition process was monitored by Optical Emission Spectroscopy (OES) to investigate the influence of the active species in plasma. It was observed that increasing the H2 gas flow into the plasma the luminescent intensities associated to the species changed. In this case, the luminescence of N2 (391,4nm) species was not proportional to the increasing of the H2 gas into the reactor. Other parameters investigated were diameter and number of holes in the cage. The analysis by Grazing Incidence X-Ray Diffraction (GIXRD) confirmed that the obtained films are composed by TiN and they may have variations in the nitrogen amount into the crystal and in the crystallite size. The optical microscopy images provided information about the homogeneity of the films. The atomic force microscopy (AFM) results revealed some microstructural characteristics and surface roughness. The thickness was measured by ellipsometry. The optical properties such as transmittance and reflectance (they were measured by spectrophotometry) are very sensitive to changes in the crystal lattice of the material, chemical composition and film thicknesses. Therefore, such properties are appropriate tools for verification of this process control. In general, films obtained at 0 sccm of H2 gas flow present a higher transmittance. It can be attributed to the smaller crystalline size due to a higher amount of nitrogen in the TiN lattice. The films obtained at 1 and 2 sccm of H2 gas flow have a golden appearance and XRD pattern showed peaks characteristics of TiN with higher intensity and smaller FWHM (Full Width at Half Maximum) parameter. It suggests that the hydrogen presence in the plasma makes the films more stoichiometric and becomes it more crystalline. It was observed that with higher number of holes in the lid of the cage, close to the region between the lid and the sample and the smaller diameter of the hole, the deposited film is thicker, which is justified by the most probability of plasma species reach effectively the sample and it promotes the growth of the film
Resumo:
Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures
Resumo:
This project describes a methodology optimization that would allow for a more efficient microwave assisted digestion process for petroleum samples. With the possible chance to vary various factors at once to see if any one factor was significant enough in the answers, experimental planning was used. Microwave assisted digestion allows, through the application of potency, an increasing number of collisions between the HNO3 and H2O2 molecules, favoring sample opening for complex matrixes. For this, a 24 factorial experimental planning was used, varying potency, time and the volumes for HNO3 65% and H2O2 30%. To achieve the desired answers, several elements were monitored (C, Cu, Cr, Fe, Ni, Zn and V) through Inductively coupled plasma atomic emission spectroscopy (ICP-OES). With this initial study it was noticed that the HNO3 was not a significant factor for any of the statistical studies for any of the analytes and the other 3 factors and their interactions showed statistical significance. A Box Behnken experimental planning was used taking in consideration 3 factors: H2O2 volume, time (min) and Potency (W), Nitric Acid kept at 4mL for a mass of 0,1g of petroleum. The results were extremely satisfying showing higher efficiency in the digestion process and taking in a responsibility between the answers for each analyte and the carbon monitoring was achieved in the following conditions: 7mL of H2O2, 700 Watts of potency and a reaction time of 7 minutes with 4mL de HNO3 for a mass of 0,1g of petroleum. The optimized digestion process was applied to four different petroleum samples and the analytes determined by ICP-OES
Resumo:
The imprecision of the frontier that separates those cognitive deficits inherent to the human physiological aging process from those which represent the early signs of nervous system degenerative pathologies ,very prevalent among the elderly, has brought attention to the need of studies aiming to establish clinical and/or laboratorial criteria to allow this differentiation. Elderly people living in poor and developing countries are frequently exposed to precarious socioeconomic conditions which facilitate the development of an array of pathologies which have metabolic and nutritional dysfunctions as the established or proposed etiological agents. The levels of certain micronutrients, such as the vitamins B12 and B9 (folic acid), and of some intermediary metabolites, such as homocysteine are being thought of as etiological factors and/or as biological markers of a group of alterations which affect the normal functioning of the nervous system with important reflexes upon cognitive performance. This study aims to investigate the influence of homocysteine, B12 vitamin and folic acid levels on the cognitive performance of the low income elderly population. This transversal study took place in Natal, Rio Grande do Norte State, Brazil, and involved 205 dwelling elderly people, users of the Programa de Saúde da Família, a public healthcare program, maintained by the city s health authorities. A multidimensional questionnaire was used to assess the socio-demographic aspects and the overall health and nutrition conditions. The cognitive performance was measured by the use of the Portuguese version of the Mini Mental State Exam (MMSE). The serum levels of homocysteine, B12 vitamin and folic acid were determined by chemiluminescence. The association between the socio-demographic and serum levels of Hcy, B12 vitamin and folic acid was determined by multiple linear regression. Serum levels higher than 13.5 μmol/l, indicative of hyperhomocysteinemia (HHcy), were found on 25.4% of the sample, being more prevalent in men (p<0.05). Deficitary levels of folic acid (<5ng/mol) and of B12 vitamin (<193 pg/ml) were found on 3.9% and 10.2% of the sample respectively. A negative correlation was found between cognitive performance with both age and HHcy and a positive correlation was found between cognitive performance and schooling. The isolated HHcy R2 values were an explanation to only 4% of the variance of the MMSE scores. However, when associated with schooling and age, this model explains about 25% of this association
Resumo:
Osgood-Schlatter (O-S) syndrome, a pathology of the musculoskeletal system, exhibits high incidence in adolescence, a phase of accelerated bone growth. Detection of physiopathological mechanisms that may cause disorders and dysfunctions in bone growth must be taken into account when planning physical activities, in order to promote normal physiological growth patterns. The aim of this epidemiological investigation was to identify and analyze the relationships between sociodemographic, anthropometric and clinical aspects and O-S. A cross-sectional design was used, with a representative sample of 956 subjects: 474 (49.6%) males and 482 (50.4%) females. Age range varied between 12 and 15 years (mean = 13.7±1.04). We used a battery of tests, previously applied in a pilot study, which met the aims of the investigation. Descriptive statistics (frequency, mean and standard deviation) were used and the odds ratio was calculated from bivariate and multivariate logistic regression (p<0.05). A prevalence of 9.8% was found (n = 94 cases): 11% males and 8.3% females. Hierarchized multivariate analysis showed a significant association between regular physical activities (OR= 1.94; CI 95%, 1.22-3.10) and shortening of the rectus femoris muscle (OR= 7.15; CI 95%, 2.86-17.86). The results may serve as a basis for therapeutic and prophylactic measures, in addition to increasing our knowledge of this syndrome in Brazilian adolescents. This investigation used a multidisciplinary approach, involving elements of anatomy, nutrition, physical education and physical therapy to elucidate the object under study related to Osgood-Schlatter syndrome
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
O jambo-vermelho (Syzygium malaccense (L.) Merryl et Perry), espécie pertencente à família Myrtaceae, possui frutos ricos em vitaminas, ferro e fósforo. Este trabalho teve por objetivos fornecer informações sobre aspectos morfológicos do fruto, semente e plântula e avaliar a influência do tamanho da semente na germinação dessa espécie. O fruto é uma baga piriforme, carnoso e indeiscente. O epicarpo é delgado, liso e avermelhado; o mesocarpo e o endocarpo são esbranquiçados e suculentos. Os frutos pesam, em média, 35,57g e medem 7,16cm de comprimento e 5,15cm de largura. As sementes são poliembriônicas e exalbuminosas, pesando, em média, 7,62g. Os cotilédones são maciços e esverdeados. A germinação é hipógea, e a emergência das plântulas inicia-se aos 36 dias após a semeadura. A raiz primária é longa e esbranquiçada. As raízes secundárias são curtas e filiformes. As sementes de maior tamanho são as mais vigorosas, não havendo diferença entre as de tamanho médio e pequeno. O estudo morfológico do jambo-vermelho pode ser utilizado para a identificação da espécie ou em relações ecológicas interespecíficas.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
For a long time, we believed in the pattern that tropical and south hemisphere species have high survival. Nowadays results began to contradict this pattern, indicating the need for further studies. Despite the advanced state of the study of bird population parameters, little is known about their variation throughout the year and the factors affecting them. Reproduction, for example, is one factor that may alter adult survival rates, because during this process the breeding pair allocates resources to maintain itself to maintain offspring, making itself more susceptible to diseases and predation. The aim of this study was to estimate survival and population size of a Central and South America passerine, Tachyphonus rufus (Boddaert, 1783), testing hypotheses about the factors that define these parameters. We performed data collection between Nov/2010 and ago/2012 in 12 ha plot, in a fragment of Atlantic Forest in northeastern Brazil. We used capture-mark-recapture methods to generate estimates using Closed Design Robust model in the program MARK. We generated Multi-state models to test some assumptions inherent to Closed Robust Design. The influence of co-variables (time, rain and reproductive cycle) and the effect of transient individuals were measured. Capture, recapture and apparent survival parameters were defined by reproductive cycle, while temporary dispersal was influence by rain. The estimates showed a higher apparent survival during the non-breeding period (92% ± 1%) than during breeding (40% ± 9%), revealing a cost of reproduction and suggesting a trade-off between surviving and reproducing. The low annual survival observed (34%) did not corroborate the pattern of high rates expected for a tropical bird. The largest population size was estimated to be 56 individuals in Nov/11, explained by high recruitment of juveniles, while the lowest observed in May/12: 10 individuals, probably as a result of massive influx of competitor species. Results from this study add to the growing literature on life history of Neotropical species. We encourage studies like this especially in Brazil, where there are few information, and suggest that covariates related to habitat quality and environmental changes should be tested, so that we can generate increasingly reliable models
Resumo:
Com o objetivo de estudar a persistência da resposta sorológica, através das provas de soroaglutinação em placa, rosa Bengala e fixação de complemento, 108 bezerras, com idade ao redor de 18 meses, foram vacinadas com uma dose padrão da vacina preparada com Brucella abortus amostra B 19. Foram obtidas amostras de soro sangüíneo antes da vacinação e após 45 dias, 6, 12 e 18 meses. Antes da vacinação, todas as bezerras apresentaram resultados negativos nos três testes. Após 45 dias, todas apresentaram título a partir de 1/100 na prova de soroaglutinação em placa e todas apresentaram resultado positivo no teste rosa Bengala, ao passo que dois animais apresentaram título 1/2 e os demais apresentaram título a partir de 1/4 na reação de fixação de complemento. Após um ano de vacinação, a grande maioria das bezerras já não apresentava título sorológico significativo. Considerando o risco a que estão sujeitos animais que vivem em áreas endêmicas e em propriedades onde a doença ocorre, e considerando a acentuada redução de título sorológico observada na grande maioria dos animais, pode-se concluir que, no caso bezerras de raças zebuínas em áreas endêmicas e que não tenham sido vacinadas na idade regulamentar, é mais vantajoso vaciná-las com a amostra B 19 aos 18 meses de idade do que deixá-las expostas a um elevado risco de infecção por Brucella.