Nutritional behaviour and beliefs of ski-mountaineers: a semi-quantitative and qualitative study.

BACKGROUND: Endurance athletes are advised to optimize nutrition prior to races. Little is known about actual athletes' beliefs, knowledge and nutritional behaviour. We monitored nutritional behaviour of amateur ski-mountaineering athletes during 4 days prior to a major competition to compare it with official recommendations and with the athletes' beliefs. METHODS: Participants to the two routes of the 'Patrouille des Glaciers' were recruited (A, 26 km, ascent 1881 m, descent 2341 m, max altitude 3160 m; Z, 53 km, ascent 3994 m, descent 4090 m, max altitude 3650 m). Dietary intake diaries of 40 athletes (21 A, 19 Z) were analysed for energy, carbohydrate, fat, protein and liquid; ten were interviewed about their pre-race nutritional beliefs and behaviour. RESULTS: Despite belief that pre-race carbohydrate, energy and fluid intake should be increased, energy consumption was 2416 ± 696 (mean ± SD) kcal · day(-1), 83 ± 17 % of recommended intake, carbohydrate intake was only 46 ± 13 % of minimal recommended (10 g · kg(-1) · day(-1)) and fluid intake only 2.7 ± 1.0 l · day(-1). CONCLUSIONS: Our sample of endurance athletes did not comply with pre-race nutritional recommendations despite elementary knowledge and belief to be compliant. In these athletes a clear and reflective nutritional strategy was lacking. This suggests a potential for improving knowledge and compliance with recommendations. Alternatively, some recommendations may be unrealistic.

The evolution and distribution of second-hand house prices in Barcelona

The aim of this study is to collect and analyze variables that could have a relationship with the second-hand house prices in Barcelona, as much disaggregated as possible from 2008 to 2011 and make a statistical analysis. The study consists of two parts. The first part is the preliminary study of the data and the second part is the econometric analysis of the data to see if there is any relationship between the second-hand house prices and the variables chosen. Finally, we looked at if there was any atypical observation and if the model presented multicollinarity. With all this information, we extract some conclusions and then, we analyzed more deeply the information.

Error Modeling and Accuracy Analysis of a Novel Mobile Hybrid Parallel Robot

Over the last decades, calibration techniques have been widely used to improve the accuracy of robots and machine tools since they only involve software modification instead of changing the design and manufacture of the hardware. Traditionally, there are four steps are required for a calibration, i.e. error modeling, measurement, parameter identification and compensation. The objective of this thesis is to propose a method for the kinematics analysis and error modeling of a newly developed hybrid redundant robot IWR (Intersector Welding Robot), which possesses ten degrees of freedom (DOF) where 6-DOF in parallel and additional 4-DOF in serial. In this article, the problem of kinematics modeling and error modeling of the proposed IWR robot are discussed. Based on the vector arithmetic method, the kinematics model and the sensitivity model of the end-effector subject to the structure parameters is derived and analyzed. The relations between the pose (position and orientation) accuracy and manufacturing tolerances, actuation errors, and connection errors are formulated. Computer simulation is performed to examine the validity and effectiveness of the proposed method.

ESTRO-HERO survey: Radiotherapy equipment and departments in the European countries: Final results from the ESTRO-HERO survey

Background: Documenting the distribution of radiotherapy departments and the availability of radiotherapy equipment in the European countries is an important part of HERO the ESTRO Health Economics in Radiation Oncology project. HERO has the overall aim to develop a knowledge base of the provision of radiotherapy in Europe and build a model for health economic evaluation of radiation treatments at the European level. The aim of the current report is to describe the distribution of radiotherapy equipment in European countries. Methods: An 84-item questionnaire was sent out to European countries, principally through their national societies. The current report includes a detailed analysis of radiotherapy departments and equipment (questionnaire items 2629), analyzed in relation to the annual number of treatment courses and the socio-economic status of the countries. The analysis is based on validated responses from 28 of the 40 European countries defined by the European Cancer Observatory (ECO). Results: A large variation between countries was found for most parameters studied. There were 2192 linear accelerators, 96 dedicated stereotactic machines, and 77 cobalt machines reported in the 27 countries where this information was available. A total of 12 countries had at least one cobalt machine in use. There was a median of 0.5 simulator per MV unit (range 0.31.5) and 1.4 (range 0.44.4) simulators per department. Of the 874 simulators, a total of 654 (75%) were capable of 3D imaging (CT-scanner or CBCToption). The number of MV machines (cobalt, linear accelerators, and dedicated stereotactic machines) per million inhabitants ranged from 1.4 to 9.5 (median 5.3) and the average number of MV machines per department from 0.9 to 8.2 (median 2.6). The average number of treatment courses per year per MV machine varied from 262 to 1061 (median 419). While 69% of MV units were capable of IMRT only 49% were equipped for image guidance (IGRT). There was a clear relation between socio-economic status, as measured by GNI per capita, and availability of radiotherapy equipment in the countries. In many low income countries in Southern and Central-Eastern Europe there was very limited access to radiotherapy and especially to equipment for IMRT or IGRT. Conclusions: The European average number of MV machines per million inhabitants and per department is now better in line with QUARTS recommendations from 2005, but the survey also showed a significant heterogeneity in the access to modern radiotherapy equipment in Europe. High income countries especially in Northern-Western Europe are well-served with radiotherapy resources, other countries are facing important shortages of both equipment in general and especially machines capable of delivering high precision conformal treatments (IMRT, IGRT)

Improving Evaluation and Development Capability in Verification and Validation

Validation and verification operations encounter various challenges in product development process. Requirements for increasing the development cycle pace set new requests for component development process. Verification and validation usually represent the largest activities, up to 40 50 % of R&D resources utilized. This research studies validation and verification as part of case company's component development process. The target is to define framework that can be used in improvement of the validation and verification capability evaluation and development in display module development projects. Validation and verification definition and background is studied in this research. Additionally, theories such as project management, system, organisational learning and causality is studied. Framework and key findings of this research are presented. Feedback system according of the framework is defined and implemented to the case company. This research is divided to the theory and empirical parts. Theory part is conducted in literature review. Empirical part is done in case study. Constructive methode and design research methode are used in this research A framework for capability evaluation and development was defined and developed as result of this research. Key findings of this study were that double loop learning approach with validation and verification V+ model enables defining a feedback reporting solution. Additional results, some minor changes in validation and verification process were proposed. There are a few concerns expressed on the results on validity and reliability of this study. The most important one was the selected research method and the selected model itself. The final state can be normative, the researcher may set study results before the actual study and in the initial state, the researcher may describe expectations for the study. Finally reliability of this study, and validity of this work are studied.

Competitors' Financial Performance Monitoring Model

The objective of the thesis was to develop a competitors’ financial performance monitoring model for management reporting. The research consisted of the selections of the comparison group and the performance meters as well as the actual creation of the model. A brief analysis of the current situation was also made. The aim of the results was to improve the financial reporting quality in the case organization by adding external business environment observation to the management reports. The comparison group for the case company was selected to include five companies that were all involved in power equipment engineering and project type business. The most limiting factor related to the comparison group selection was the availability of quarterly financial reporting. The most suitable performance meters were defined to be the developments of revenue, order backlog and EBITDA. These meters should be monitored systematically on quarterly basis and reported to the company management in a brief and informative way. The monitoring model was based on spreadsheet construction with key characteristics being usability, flexibility and simplicity. The model acts as a centered storage for financial competitor information as well as a reporting tool. The current market situation is strongly affected by the economic boom in the recent years and future challenges can be clearly seen in declining order backlogs. The case company has succeeded well related to its comparison group during the observation period since its business volume and profitability have developed in the best way.

Phase diagram and complex patterns in the modeling of the bromate-oxalic acid-Ce-acetone oscillating reaction

Simulations have been carried out on the bromate - oxalic acid - Ce(IV) - acetone oscillating reaction, under flow conditions, using Field and Boyd's model (J. Phys. Chem. 1985, 89, 3707). Many different complex dynamic behaviors were found, including simple periodic oscillations, complex periodic oscillations, quasiperiodicity and chaos. Some of these complex oscillations can be understood as belonging to a Farey sequence. The many different behaviors were systematized in a phase diagram which shows that some regions of complex patterns were nested with one inside the other. The existence of almost all known dynamic behavior for this system allows the suggestion that it can be used as a model for some very complex phenomena that occur in biological systems.

APPLICATION OF PARAFAC AND OPLS-DA ANALYSES ON HPLC FINGERPRINTS FOR THE CHARACTERIZATION OF Hibiscus sabdariffaCALYXES

The calyxes of Hibiscus sabdariffa are used in traditional medicine around the world. However, quality assurance protocols and chemical variability have not been previously analyzed. In the present study, chemical characterization of a set of samples of H. sabdariffa calyxes commercialized in Colombia was accomplished with the aim to explore the chemical variability among them. Chemometrics-based analyses on the data obtained from the HPLC-UV-DAD-derived profiles were then performed. Thus, the pre-processed single-wavelength data were subjected to principal component analysis (PCA). The PCA-derived results evidenced different groups which were well-correlated to the corresponding total phenolic and total anthocyanin contents. Multi-wavelength chromatographic (HPLC-UV-DAD surfaces) data were additionally examined via parallel factor analysis (PARAFAC) as data reduction method and the obtained loadings were subsequently submitted to PCA and orthogonal partial least squares discriminant analysis (OPLS-DA). Results were thus consistent with those from single-wavelength data. PCA loadings were employed to determine those chemical components responsible for the data variance and OPLS-DA model, constructed from PARAFAC loadings, and indicated differentiation according total anthocyanin contents among samples. The present chemometric analysis therefore demonstrated to be an excellent tool for differentiation of H. sabdariffacalyxes according to their chemical composition.

A comparison of electricity spot prices simulation using ARMA-GARCH and mean-reverting models

The aim of this work is to compare two families of mathematical models for their respective capability to capture the statistical properties of real electricity spot market time series. The first model family is ARMA-GARCH models and the second model family is mean-reverting Ornstein-Uhlenbeck models. These two models have been applied to two price series of Nordic Nord Pool spot market for electricity namely to the System prices and to the DenmarkW prices. The parameters of both models were calibrated from the real time series. After carrying out simulation with optimal models from both families we conclude that neither ARMA-GARCH models, nor conventional mean-reverting Ornstein-Uhlenbeck models, even when calibrated optimally with real electricity spot market price or return series, capture the statistical characteristics of the real series. But in the case of less spiky behavior (System prices), the mean-reverting Ornstein-Uhlenbeck model could be seen to partially succeeded in this task.

A risk infection simulation model for fusarium head blight of wheat

Fusarium Head Blight (FHB) is a disease of great concern in wheat (Triticum aestivum). Due to its relatively narrow susceptible phase and environmental dependence, the pathosystem is suitable for modeling. In the present work, a mechanistic model for estimating an infection index of FHB was developed. The model is process-based driven by rates, rules and coefficients for estimating the dynamics of flowering, airborne inoculum density and infection frequency. The latter is a function of temperature during an infection event (IE), which is defined based on a combination of daily records of precipitation and mean relative humidity. The daily infection index is the product of the daily proportion of susceptible tissue available, infection frequency and spore cloud density. The model was evaluated with an independent dataset of epidemics recorded in experimental plots (five years and three planting dates) at Passo Fundo, Brazil. Four models that use different factors were tested, and results showed all were able to explain variation for disease incidence and severity. A model that uses a correction factor for extending host susceptibility and daily spore cloud density to account for post-flowering infections was the most accurate explaining 93% of the variation in disease severity and 69% of disease incidence according to regression analysis.

The Fed Model: International Analysis

The Fed model is a widely used market valuation model. It is often used only on market analysis of the S&P 500 index as a shorthand measure for the attractiveness of equity, and as a timing device for allocating funds between equity and bonds. The Fed model assumes a fixed relationship between bond yield and earnings yield. This relationship is often assumed to be true in market valuation. In this paper we test the Fed model from historical perspective on the European markets. The markets of the United States are also includedfor comparison. The purpose of the tests is to determine if the Fed model and the underlying assumptions come true on different markets. The various tests are made on time-series data ranging from the year 1973 to the end of the year 2008. The statistical methods used are regressions analysis, cointegration analysis and Granger causality. The empirical results do not give strong support for the Fed model. The underlying relationships assumed by the Fed model are statistically not valid in most of the markets examined and therefore the model is not valid in valuation purposes generally. The results vary between the different markets which gives reason to suspect the general use of the Fed model in different market conditions and in different markets.

Determination of sulfur in diesel using ATR/FTIR and multivariate calibration

The aim of this present work was to provide a more fast, simple and less expensive to analyze sulfur content in diesel samples than by the standard methods currently used. Thus, samples of diesel fuel with sulfur concentrations varying from 400 and 2500 mgkg-1 were analyzed by two methodologies: X-ray fluorescence, according to ASTM D4294 and by Fourier transform infrared spectrometry (FTIR). The spectral data obtained from FTIR were used to build multivariate calibration models by partial least squares (PLS). Four models were built in three different ways: 1) a model using the full spectra (665 to 4000 cm-1), 2) two models using some specific spectrum regions and 3) a model with variable selected by classic method of variable selection stepwise. The model obtained by variable selection stepwise and the model built with region spectra between 665 and 856 cm-1 and 1145 and 2717 cm-1 showed better results in the determination of sulfur content.

Viestintä ravitsemusosaamisen kehittämisessä Case:Sairaalan ateriaprosessi

Tutkielman tarkoituksena oli tutkia viestinnän merkitystä osaamisen kehittämisessä. Tavoitteena oli tutkia, miten viestintä edistää ravitsemusosaamisen kehittämistä sairaalan ateriaprosessissa. Tutkimuksessa etsittiin vastausta kysymyksiin, mitkä ovat ravitsemusosaamisen kehittämisen ja viestinnän tavoitteet, millä työyhteisöviestinnän foorumeilla uuden ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämiä muutoksia käsitellään ja millaisia työssä oppimisen prosesseja näillä foorumeilla on tunnistettavissa. Empirian näkökulmasta tutkimusta voidaan kuvata tapaustutkimukseksi. Tapauksena on sairaalan ateriaprosessi. Tutkimuksen valmistelevana aineistona käytettiin uutta ravitsemushoitosuositusta (Nuutinen ym. 2010), jota täydennettiin haastatteluaineistolla. Tutkimuksessa ovat edustettuina hoitotyön, ruokapalvelun ja ravitsemushoidon asiantuntemuksen näkökulmat sairaalasta sekä ammatti- ja aikuisopistosta. Tutkimusmenetelmänä käytettiin teemahaastatteluja. Haastattelut nauhoitettiin ja litteroitiin tekstimuotoon. Aineisto analysoitiin teemakortiston ja teemoittelun avulla. Tutkimuksen tulokset osoittavat, että ravitsemusosaamisen kehittämisen tavoitteena on uuden ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämien muutosten toteuttaminen sairaalan ravitsemushoidon prosesseissa ja tuotteissa. Ravitsemusosaamisen kehittämisen tavoitteena on tässä yhteydessä ateriaprosessin ja ruokapalvelun tuotteiden eli ruokavalioiden kehittäminen. Ravitsemushoidon kehittämisen tarkoituksena on asiakkaiden toipumisen, elämänlaadun ja hyvinvoinnin edistäminen sekä terveydenhuollon kustannusten säästäminen. Viestinnällä on tärkeä merkitys ravitsemusosaamisen kehittämisessä. Viestinnän avulla edistetään yksilöllistä ja yhteistä eli tiimioppimista vuorovaikutuksen kautta. Ruokapalvelu- ja hoitohenkilöstön sekä ravitsemushoidon asiantuntijoiden välinen vuoropuhelu nähdään tärkeänä ravitsemusosaamisen kehittämisessä. Vuoropuhelun avulla vahvistetaan ravitsemushoitoon liittyvää tietopohjaa ja yhteistä käsitteistöä. Tavoitteena on yhteisen kielen ja toimintamallin luominen ravitsemushoidon kehittämiseen. Ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämiä muutoksia käsitellään ulkoisissa ja sisäisissä verkostoissa esimerkiksi ravitsemus-yhdyshenkilöverkoston tapaamisissa, moniammatillisissa työryhmissä, henkilöstö- ja oppisopimuskoulutuksissa sekä työfoorumilla eli fyysisessä työtilassa ja hyödyntäen viestintäteknologiaa. Hoitotyön, ruokapalvelun ja ravitsemushoidon asiantuntijoilla/opettajilla on tärkeä rooli ravitsemusosaamisen kehittämiseen liittyvässä työssä oppimisen ohjaamisessa. Ravitsemusosaamisen kehittämisessä on tunnistettavissa sosiaalisia, reflektiivisiä, kognitiivisia ja operationaalisia työssä oppimisen prosesseja. Sosiaalisia prosesseja ovat työkokemusten vaihdanta ja reflektiivisiä niiden arviointi. Kognitiivisten prosessien tarkoitus on tiedonhankinta ja prosessointi, jolloin yhdistetään kokemustietoa sekä uutta ravitsemustieteellistä tietoa. Tavoitteena on yhteisen kielen ja toimintamallin luominen, jota kokeillaan käytännössä. Operationaalisia prosesseja ovat fyysisessä työtilassa tapahtuva kokeilemalla, tekemällä ja soveltamalla oppiminen, jolloin uutta toimintamallia esimerkiksi vajaaravitsemuksen seulontaa, ateriatilausta tai reseptiikkaa kokeillaan käytännössä. Johtopäätöksenä voidaan todeta, että sairaalassa on omaksuttu oppivan organisaation periaatteita ravitsemusosaamisen kehittämisessä. Ravitsemusosaamisen kehittäminen on yhteydessä muutokseen, strategiaan, prosessien ja tuotteiden kehittämiseen. Viestinnän avulla edistetään ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämien muutosten toteuttamista sairaalan ateriaprosessissa ja ruokavalioissa. Hoito- ja ruokapalveluhenkilöstön sekä ravitsemushoidon asiantuntijoiden välisen vuoropuhelun tavoitteena on yhteisen kielen ja toimintamallin luominen ravitsemushoidon kehittämiseen. Tutkimus palvelee ravitsemusosaamisen kehittämistä sairaalan ateriaprosessissa. Tutkimuksen tuloksia on mahdollista käyttää vertailuoppimismateriaalina terveydenhuollon organisaatioissa ja verkostoissa.

Modelling of combustion and sorbent reactions in three-dimensional flow environment of a circulating fluidized bed furnace

This thesis presents a three-dimensional, semi-empirical, steady state model for simulating the combustion, gasification, and formation of emissions in circulating fluidized bed (CFB) processes. In a large-scale CFB furnace, the local feeding of fuel, air, and other input materials, as well as the limited mixing rate of different reactants produce inhomogeneous process conditions. To simulate the real conditions, the furnace should be modelled three-dimensionally or the three-dimensional effects should be taken into account. The only available methods for simulating the large CFB furnaces three-dimensionally are semi-empirical models, which apply a relatively coarse calculation mesh and a combination of fundamental conservation equations, theoretical models and empirical correlations. The number of such models is extremely small. The main objective of this work was to achieve a model which can be applied to calculating industrial scale CFB boilers and which can simulate all the essential sub-phenomena: fluid dynamics, reactions, the attrition of particles, and heat transfer. The core of the work was to develop the model frame and the required sub-models for determining the combustion and sorbent reactions. The objective was reached, and the developed model was successfully used for studying various industrial scale CFB boilers combusting different types of fuel. The model for sorbent reactions, which includes the main reactions for calcitic limestones, was applied for studying the new possible phenomena occurring in the oxygen-fired combustion. The presented combustion and sorbent models and principles can be utilized in other model approaches as well, including other empirical and semi-empirical model approaches, and CFD based simulations. The main achievement is the overall model frame which can be utilized for the further development and testing of new sub-models and theories, and for concentrating the knowledge gathered from the experimental work carried out at bench scale, pilot scale and industrial scale apparatus, and from the computational work performed by other modelling methods.

APROS model validation in case of fast transients in a boiling water reactor

This Master´s thesis investigates the performance of the Olkiluoto 1 and 2 APROS model in case of fast transients. The thesis includes a general description of the Olkiluoto 1 and 2 nuclear power plants and of the most important safety systems. The theoretical background of the APROS code as well as the scope and the content of the Olkiluoto 1 and 2 APROS model are also described. The event sequences of the anticipated operation transients considered in the thesis are presented in detail as they will form the basis for the analysis of the APROS calculation results. The calculated fast operational transient situations comprise loss-of-load cases and two cases related to a inadvertent closure of one main steam isolation valve. As part of the thesis work, the inaccurate initial data values found in the original 1-D reactor core model were corrected. The input data needed for the creation of a more accurate 3-D core model were defined. The analysis of the APROS calculation results showed that while the main results were in good accordance with the measured plant data, also differences were detected. These differences were found to be caused by deficiencies and uncertainties related to the calculation model. According to the results the reactor core and the feedwater systems cause most of the differences between the calculated and measured values. Based on these findings, it will be possible to develop the APROS model further to make it a reliable and accurate tool for the analysis of the operational transients and possible plant modifications.