Effect of group formation on performance, task management and social loafing

Engineering graduates of today are required to adapt to a rapidly changing work environment. In particular, they are expected to demonstrate enhanced capabilities in both mono-disciplinary and multi-disciplinary teamwork environments. Engineering education needs, as a result, to further focus on developing group work capabilities amongst engineering graduates. Over the last two years, the authors trialed various group work strategies across two engineering disciplines. In particular, the effect of group formation on students' performance, task management, and social loafing was analyzed. A recently developed online teamwork management tool, Teamworker, was used to collect students' experience of the group work. Analysis showed that students who were allowed to freely allocate to any group were less likely to report loafing from other team members, than students who were pre-allocated to a group. It also showed that performance was more affected by the presence or absence of a leader in pre-allocated rather than free-allocated groups.

Theoretical analysis of serrated chip formation based on ideal models in high speed cutting

In this paper, two ideal formation models of serrated chips, the symmetric formation model and the unilateral right-angle formation model, have been established for the first time. Based on the ideal models and related adiabatic shear theory of serrated chip formation, the theoretical relationship among average tooth pitch, average tooth height and chip thickness are obtained. Further, the theoretical relation of the passivation coefficient of chip's sawtooth and the chip thickness compression ratio is deduced as well. The comparison between these theoretical prediction curves and experimental data shows good agreement, which well validates the robustness of the ideal chip formation models and the correctness of the theoretical deducing analysis. The proposed ideal models may have provided a simple but effective theoretical basis for succeeding research on serrated chip morphology. Finally, the influences of most principal cutting factors on serrated chip formation are discussed on the basis of a series of finite element simulation results for practical advices of controlling serrated chips in engineering application.

The CAPA Indigenous Project. Indigenous postgraduate education: A project into the barriers which indigenous students must overcome in postgraduate studies: A short history 1993-2000.

This brief paper outlines some of the early work undertaken in Indigenous postgraduate activism in Australia. In particular, the work undertaken in the lead up to the 'Project into the Barriers which Indigenous Students must Overcome in Postgraduate Studies'.

Patterns

In recent years there has been widespread interest in patterns, perhaps provoked by a realisation that they constitute a fundamental brain activity and underpin many artificial intelligence systems. Theorised concepts of spatial patterns including scale, proportion, and symmetry, as well as social and psychological understandings are being revived through digital/parametric means of visualisation and production. The effect of pattern as an ornamental device has also changed from applied styling to mediated dynamic effect. The interior has also seen patterned motifs applied to wall coverings, linen, furniture and artefacts with the effect of enhancing aesthetic appreciation, or in some cases causing psychological and/or perceptual distress (Rodemann 1999). ----- ----- While much of this work concerns a repeating array of surface treatment, Philip Ball’s The Self- Made Tapestry: Pattern Formation in Nature (1999) suggests a number of ways that patterns are present at the macro and micro level, both in their formation and disposition. Unlike the conventional notion of a pattern being the regular repetition of a motif (geometrical or pictorial) he suggests that in nature they are not necessarily restricted to a repeating array of identical units, but also include those that are similar rather than identical (Ball 1999, 9). From his observations Ball argues that they need not necessarily all be the same size, but do share similar features that we recognise as typical. Examples include self-organized patterns on a grand scale such as sand dunes, or fractal networks caused by rivers on hills and mountains, through to patterns of flow observed in both scientific experiments and the drawings of Leonardo da Vinci.

The impact of sulphur content of diesel fuel on ultrafine particle formation

Early this year the Australian Department of Environment and Heritage commissioned a desktop literature review with a focus on ultrafine particles including analysis of health impacts of the particles as well as the impact of sulphur content of diesel fuel on ultrafine particle emission. This paper summarizes the findings of the report on the link between the sulphur content of diesel fuels and the number of ultrafine particles in diesel emissions. The literature search on this topic resulted in over 150 publications. The majority of these publications, although investigating different aspects of the influence of fuel sulphur level on diesel vehicle emissions, were not directly concerned with ultrafine particle emissions. A specific focus of the paper is on: ----- ----- summary of state of knowledge established by the review, and ----- ----- summary of recommendations on the research priorities for Australia to address the information gaps for this issue, and on the appropriate management responses.

'The black hole of our history' : a conversation with Louis Nowra

This is an edited version of an interview recorded for Canadian Theatre Review in 1992. By that time Nowra had established a reputation as one of Australia's foremost playwrights. Part of the generation which succeeded the New Wave of the late 1960s and early 1970s, Nowra became known for a stylistic inventiveness which placed him outside the tradition of realist playwriting in Australia. The international outlook in his early plays, and the fact that he was not exclusively preoccupied with Australian settings and subject matter, was often a focal point in critical accounts of his work. In this interview Nowra discusses his 'internationalism', and a range of topics including the playwriting process; the presence of landscape in his plays; and the autobiographical elements in his work.

Formation of one-dimensional capped ZnO nanoparticle assemblies at the air/water interface

The self-assembling behavior and microscopic structure of zinc oxide nanoparticle Langmuir-Blodgett monolayer films were investigated for the case of zinc oxide nanoparticles coated with a hydrophobic layer of dodecanethiol. Evolution of nanoparticle film structure as a function of surface pressure (π) at the air-water interface was monitored in situ using Brewster’s angle microscopy, where it was determined that π=16 mN/m produced near-defect-free monolayer films. Transmission electron micrographs of drop-cast and Langmuir-Schaefer deposited films of the dodecanethiol-coated zinc oxide nanoparticles revealed that the nanoparticle preparation method yielded a microscopic structure that consisted of one-dimensional rodlike assemblies of nanoparticles with typical dimensions of 25 x 400 nm, encased in the organic dodecanethiol layer. These nanoparticle-containing rodlike micelles were aligned into ordered arrangements of parallel rods using the Langmuir-Blodgett technique.

Enhancing vascularized bone formation using tissue engineered periosteum

Objectives: The periosteum plays an indispensable role in both bone formation and bone defect healing. The aim of this project is to produce tissue engineered periosteum for bone defect treatment. Methods: In this study we constructed an artificial in vitro periosteum by incorporating osteogenic differentiated bone marrow stromal cells (BMSCs) and cobalt chloride (CoCl2)-treated BMSCs. The engineered periostea were implanted both subcutaneously and into skull bone defects in SCID mice to investigate ectopic and orthotopic osteogenesis and vascularisation. After two weeks in subcutaneous and four weeks in bone defect areas, the implanted constructs were assessed for ectopic and orthotopic osteogenesis and vascularisation by micro-CT, histomorphometrical and immunohistochemical methods. Results: The results showed that CoCl2 pre-treated BMSCs induced higher degree of vascularisation and enhanced osteogenesis within the implants in both ectopic and orthotopic areas. Conclusion: This study provided a novel approach using BMSCs sourced from the same patient for both osteogenic and pro-angiogenic purposes in constructing tissue engineered periosteum to enhance vascularized osteogenesis.

Australian queer student activists' media representations of queer

Queer student activists are a visible aspect of Australian tertiary communities. Institutionally there are a number of organisations and tools representing and serving gay, lesbian, bisexual, transgender, intersex and ‘otherwise queer identifying’ (GLBTIQ) students. ‘Queer’ is a contentious term with meanings ranging from a complex deconstructive academic theory to a term for ‘gay’. Despite the institutional applications, the definition remains unclear and under debate. In this thesis I examine queer student activists’ production of print media, a previously under-researched area. In queer communities, print media provides crucial grounding for a model of queer. Central to identity formation and activism, this media is a site of textuality for the construction and circulation of discourses of queer student media. Thus, I investigate the various ways Australian queer student activists construct queer, queer identity, and queer activism in their print media. I use discourse analysis, participant observation and semi-structured interviews to enable a thorough investigation of both the process and the products of queer student media. My findings demonstrate that queer student activists’ politics are grounded in a range of ideologies drawing from Marxism, Feminism, Gay Liberation, Anti-assimilation and Queer Theory. Grounded in queer theoretical perspectives of performativity this research makes relatively new links between Queer Theory and Media Studies in its study of the production contexts of queer student media. In doing so, I show how the university context informs student articulations of queer, proving the necessity to locate research within its social-cultural setting. My research reveals that, much like Queer Theory, these representations of queer are rich with paradox. I argue that queer student activists are actually theorising queer. I call for a reconceptualisation of Queer Theory and question the current barriers between who is considered a ‘theorist’ of queer and who is an ‘activist’. If we can think about ‘theory’ as encompassing the work of activists, what implications might this have for politics and analysis?

The life-history and relationships of ‘Orthocladius’ pictipennis Freeman (Diptera: Chironomidae)

The previously unknown larva and pupa of ‘Orthocladius’ pictipennis Freeman have been found, and associated by molecular means. Pharate pupae (males within pupae) allow the link to the described adult. We describe the larva and pupa, and provide short notes on the adult. The taxon is unrelated to Orthocladius – no members of this Holarctic genus are present in New Zealand – and therefore we provide a new generic name, Paulfreemania Cranston and Krosch gen. n. as well as a short discussion of relationships amongst austral Orthocladiinae.

The place of media in community formation for homeless youth : a case study of Gibber magazine

This paper presents the findings of a research project that was set up to establish haw well Gibber, a street magazine set up in Perth in 1994, effectively provides a 'voice' for its canstituency -'young people marginalised by society'.

An obsession with storytelling : conducting oral history interviews for creative writing

Anna Hirsch and Clare Dixon (2008, 190) state that creative writers’ ‘obsession with storytelling…might serve as an interdisciplinary tool for evaluating oral histories.’ This paper enters a dialogue with Hirsch and Dixon’s statement by documenting an interview methodology for a practice-led PhD project, The Artful Life Story: Oral History and Fiction, which investigates the fictionalising of oral history. ----- ----- Alistair Thomson (2007, 62) notes the interdisciplinary nature of oral history scholarship from the 1980s onwards. As a result, oral histories are being used and understood in a variety of arts-based settings. In such contexts, oral histories are not valued so much for their factual content but as sources that are at once dynamic, emotionally authentic and open to a multiplicity of interpretations. How can creative writers design and conduct interviews that reflect this emphasis? ----- ----- The paper briefly maps the growing trend of using oral histories in fiction and ethnographic novels, in order to establish the need to design interviews for arts-based contexts. I describe how I initially designed the interviews to suit the aims of my practice. Once in the field, however, I found that my original methods did not account for my experiences. I conclude with the resulting reflection and understanding that emerged from these problematic encounters, focusing on the technique of steered monologue (Scagliola 2010), sometimes referred to as the Biographic Narrative Interpretative Method (Wengraf 2001, Jones 2006).

The effect of synthesis temperature on the formation of hydrotalcites in Bayer liquor : a vibrational spectroscopic analysis

The seawater neutralisation process is currently used in the Alumina industry to reduce the pH and dissolved metal concentrations in bauxite refinery residues, through the precipitation of Mg, Al, and Ca hydroxide and carbonate minerals. This neutralisation method is very similar to the co-precipitation method used to synthesise hydrotalcite (Mg6Al2(OH)16CO3•4H2O). This study looks at the effect of temperature on the type of precipitates that form from the seawater neutralisation process of Bayer liquor. The Bayer precipitates have been characterised by a variety of techniques, including X-ray diffraction, Raman spectroscopy and infrared spectroscopy. The mineralogical composition of Bayer precipitates largely includes hydrotalcite, hydromagnesite, and calcium carbonate species. XRD determined that Bayer hydrotalcites that are synthesised at 55 °C have a larger interlayer distance, indicating more anions are removed from Bayer liquor. Vibrational spectroscopic techniques have identified an increase in hydrogen bond strength for precipitates formed at 55 °C, suggesting the formation of a more stable Bayer hydrotalcite. Raman spectroscopy identified the intercalation of sulfate and carbonate anions into Bayer hydrotalcites using these synthesis conditions.

Thermal stability of the ‘cave’ mineral brushite CaHPO4•2H2O -mechanism of formation and decomposition

Thermogravimetry combined with evolved gas mass spectrometry has been used to ascertain the stability of the ‘cave’ mineral brushite. X-ray diffraction shows that brushite from the Jenolan Caves is very pure. Thermogravimetric analysis coupled with ion current mass spectrometry shows a mass loss at 111°C due to loss of water of hydration. A further decomposition step occurs at 190°C with the conversion of hydrogen phosphate to a mixture of calcium ortho-phosphate and calcium pyrophosphate. TG-DTG shows the mineral is not stable above 111°C. A mechanism for the formation of brushite on calcite surfaces is proposed, and this mechanism has relevance to the formation of brushite in urinary tracts.