Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

Risk of hepatitis B virus transmission by diagnostic hysteroscopy

Few data are available in the literature concerning the efficacy of standard hysteroscope disinfection procedures to prevent hepatitis B transmission. The aim of the present study was to determine the risk of hepatitis B virus (HBV) transmission during hysteroscopy among anti-HBc-seropositive women. Serum and hysteroscopic samples were collected from 62 women after diagnostic hysteroscopy. All samples were tested for serologic HBV markers. Polymerase chain reactions (PCR) were carried out to amplify regions C and S of the viral genome and only samples amplified by both pairs of primers were considered to be positive. Anti-HBc was repeatedly reactive in 48 (77%) of 62 serum samples, and HBsAg was detected in 8 (13%). At least one HBV serologic marker was found in 49 (79%) samples. Only one sample was HBsAg positive and anti-HBc negative. HBV-DNA was detected by PCR in 7 serum samples but in only 3 hysteroscopic samples obtained just after hysteroscopy. It is noteworthy that high levels of anti-HBc IgM were detected in one HBsAg-negative patient who showed an HBV-DNA-positive hysteroscopic sample. An elevated sample/cut-off ratio for anti-HBc IgM suggests recent infection and reinforces the need for testing for HBsAg and anti-HBc before hysteroscopy, since acute hepatitis B can be clinically asymptomatic. Viral DNA was not detected in any hysteroscopic samples collected after washing and disinfecting procedures with glutaraldehyde. We conclude that HBV-DNA can be found in the hysteroscope soon after hysteroscopy, but standard disinfecting procedures are effective in viral removal.

Preclinical evaluation of the antidiabetic effect of Eugenia jambolana seed powder in streptozotocin-diabetic rats

The world is facing an explosive increase in the incidence of diabetes mellitus and cost-effective complementary therapies are needed. The effects of Eugenia jambolana, a household remedy for diabetes, were studied. Streptozotocin diabetic female albino Wistar rats weighing 150-200 g (N = 6) were fed E. jambolana seed powder (250, 500 or 1000 mg/kg) for 15 days. Diabetic rats fed 500 and 1000 mg/kg seed powder showed an increase in body weight on day 20 in relation to day 5 (6 ± 4.7, 9 ± 7.8 vs diabetic control -16 ± 7.1 g, P < 0.001), a decrease in fasting blood glucose (75 ± 11.9, 123 ± 14.4 vs diabetic control -34 ± 12.1 mg/dl, P < 0.001), a difference in post-treatment fasting and peak blood glucose (38 ± 11.9, 36 ± 14.2 vs diabetic control 78 ± 11.9 mg/dl, P < 0.001), and a difference in liver glycogen (50 ± 6.8, 52 ± 7.5 vs normal control 90 ± 6.6 µg/g of liver tissue, P < 0.001). Tri-terpenoids, tannins, gallic acid, and oxalic acid were the chemical constituents detected in E. jambolana seed. The best results were obtained with an oral dose of 500 mg/kg. Subacute toxicity studies with a single administration of 2.5 and 5.0 g/kg seed powder showed no mortality or abnormality. These data on the antidiabetic effect of E. jambolana seed are adequate for approval of phase 2 clinical trials to evaluate this seed powder as complementary therapy in type 2 and type 1 diabetes.

Occurrence of Haemophilus influenzae strains in three Brazilian states since the introduction of a conjugate Haemophilus influenzae type b vaccine

Few vaccines in history have induced such a dramatic decline in incidence over such a short period of time as the Haemophilus influenzae type b (Hib) conjugate. This vaccine was introduced in 1988 in the United States, but only in 1999 was Hib immunization introduced by the Brazilian Ministry of Health as part of the routine infant National Immunization Program. The authors analyzed 229 H. influenzae (Hi) isolates from Public Health Laboratories in three Brazilian states: Pernambuco (Northeast, N = 54), Santa Catarina (South, N = 19), and Rio de Janeiro (Southeast, N = 156). The isolates were collected from Brazilian children 0-10 years of age with meningitis and other infections from 1990 to 2003 and were part of the research collection of the National Institute of Quality Control in Health, FIOCRUZ. Bacterial strains were characterized by serotyping and biotyping. During the pre-vaccination period the prevalence infection due to Hib was of 165 isolates and only 2 non-b Hi among all the notified meningitis infections caused by Hi. Our results showed a significant decrease in the prevalence of Hib meningitis from 165 to 33 isolates after 1999. However, during the post-vaccination period of 2001-2003 we observed an increase in the number of non-b Hi isolates: only 2 non-b strains isolated from 1990 to 1999 and 29 from 1999 to 2003. Based on the present data, the authors emphasize the need for more sensitive epidemiological and bacteriological studies aiming the improvement of the available Hib vaccine, in order to protect the susceptible population to infections due to other serological types of Hi and the reevaluation of immunization schedules used by the National Immunization Program.

Luteal phase of the menstrual cycle increases sweating rate during exercise

The present study evaluated whether the luteal phase elevation of body temperature would be offset during exercise by increased sweating, when women are normally hydrated. Eleven women performed 60 min of cycling exercise at 60% of their maximal work load at 32ºC and 80% relative air humidity. Each subject participated in two identical experimental sessions: one during the follicular phase (between days 5 and 8) and the other during the luteal phase (between days 22 and 25). Women with serum progesterone >3 ng/mL, in the luteal phase were classified as group 1 (N = 4), whereas the others were classified as group 2 (N = 7). Post-exercise urine volume (213 ± 80 vs 309 ± 113 mL) and specific urine gravity (1.008 ± 0.003 vs 1.006 ± 0.002) changed (P < 0.05) during the luteal phase compared to the follicular phase in group 1. No menstrual cycle dependence was observed for these parameters in group 2. Sweat rate was higher (P < 0.05) in the luteal (3.10 ± 0.81 g m-2 min-1) than in the follicular phase (2.80 ± 0.64 g m-2 min-1) only in group 1. During exercise, no differences related to menstrual cycle phases were seen in rectal temperature, heart rate, rate of perceived exertion, mean skin temperature, and pre- and post-exercise body weight. Women exercising in a warm and humid environment with water intake seem to be able to adapt to the luteal phase increase of basal body temperature through reduced urinary volume and increased sweating rate.

Activity of liver microsomal enzymes during the chronic phase of murine schistosomiasis

The effects of schistosomiasis on microsomal enzymes were studied on post-infection day 90 when accumulated damage and fibrosis are most intense but granulomatous reaction around the eggs harbored in the liver is smaller than during the earlier phases. Swiss Webster (SW) and DBA/2 mice of either sex (N = 12 per sex per group) were infected with 100 Schistosoma mansoni cercariae on postnatal day 10 and killed on post-infection day 90. Cytochrome P-450 (CYP) concentration and alkoxyresorufin-O-dealkylases (EROD, MROD, BROD, and PROD), p-nitrophenol-hydroxylase (PNPH), coumarin-7-hydroxylase (COH), and UDP-glucuronosyltransferase (UGT) activities were measured in hepatic microsomes. Age-matched mice of the same sex and strain were used as controls. In S. mansoni-infected mice, CYP1A- and 2B-mediated activities (control = 100%) were reduced in SW (EROD: male (M) 36%, female (F) 38%; MROD: M 38%, F 39%; BROD: M 46%, F 19%; PROD: M 50%, F 28%) and DBA/2 mice (EROD: M 64%, F 58%; MROD: M 60%; BROD: F 49%; PROD: M 73%) while PNPH (CYP2E1) was decreased in SW (M 31%, F 38%) but not in DBA/2 mice. COH did not differ between infected and control DBA/2 and UGT, a phase-2 enzyme, was not altered by infection. In conclusion, chronic S. mansoni infection reduced total CYP content and all CYP-mediated activities evaluated in SW mice, including those catalyzed by CYP2E1 (PNPH), CYP1A (EROD, MROD) and 2B (BROD, PROD). In DBA/2 mice, however, CYP2A5- and 2E1-mediated activities remained unchanged while total CYP content and activities mediated by other CYP isoforms were depressed during chronic schistosomiasis.

Antinociceptive properties in mice of a lectin isolated from the marine alga Amansia multifida Lamouroux

The antinociceptive effects of a lectin (LEC) isolated from the marine alga Amansia multifida were determined in Swiss mice. The LEC (1, 5, and 10 mg/kg) inhibited acetic acid-induced abdominal writhings in a dose-dependent manner after intraperitoneal or oral administration. A partial but significant inhibition of writhings was observed after the combination of LEC (10 mg/kg) with avidin (1 mg/kg), a potent inhibitor of the hemmaglutinant activity of the lectin. However, total writhing inhibition was demonstrable in the group of mice treated with LEC plus mannose (1 mg/kg), as compared to LEC alone or to control groups. Furthermore, avidin and mainly mannose also play a role in antinociception, somehow facilitating the interaction of LEC with its active cell sites. In the formalin test, although both phases of the response were significantly inhibited, the effect of LEC was predominant during phase 2, causing inhibition of licking time that ranged from 48 to 88% after oral (5 and 10 mg/kg) and intraperitoneal (1 to 5 mg/kg) administration. As is the case with morphine, the effect of LEC (2 mg/kg) was reversed by naloxone (2 mg/kg), indicating the involvement of the opioid system. LEC was also effective in the hot-plate test, producing inhibitory responses to the thermal stimulus, and its effects were blocked by naloxone. In the pentobarbital-induced sleeping time, although LEC did not alter the onset of sleep significantly, it increased the time of sleep within the same dose range compared to control. These results show that LEC presents antinociceptive effects of both central and peripheral origin, possibly involving the participation of the opioid system.

Farinha de yacon e inulina como ingredientes na formulação de bolo de chocolate

Novos ingredientes têm sido investigados para que possam atender às exigências do mercado consumidor atual que deseja produtos com qualidade sensorial e nutricional associada a benefícios para a saúde. Os frutooligossacarídeos (FOS) presentes no yacon (Polymnia sonchifolia), e a inulina apresentam propriedades promotoras de saúde (fibra alimentar e efeito prebiótico) e podem melhorar aspectos sensoriais em alimentos. O presente trabalho teve como objetivos utilizar a inulina e/ou farinha de yacon como ingredientes do bolo de chocolate. Os bolos obtidos das formulações padrão (P), da formulação (A) contendo a farinha de trigo substituída em 20% por farinha de yacon e da formulação (B) contendo a farinha de trigo substituída em 40% por farinha de yacon e em 6% por inulina, foram avaliados quanto às suas propriedades químicas e físicas, preferência e estabilidade de armazenamento em relação ao bolo padrão de chocolate. Os bolos das formulações A e B apresentaram propriedades químicas, físicas, preferência e estabilidade comparáveis ao da formulação padrão. Como vantagens, apresentaram menores valores de dureza, maiores teores em fibra alimentar total (12,35% e 23,6%) em relação ao P (9,02%). O valor calórico foi semelhante (2,09kal para A) e menor (1,62kal para B) que do padrão (2,13kcal), além da presença de frutooligossacarídeos e ou inulina. Portanto, a farinha de yacon e inulina podem ser utilizadas como ingredientes para formular bolo de chocolate, fornecendo produtos com características que atendem às exigências do mercado consumidor.

A Project Portfolio Tool for Forecasting Small Projects Profitability

The case company in this study is a large industrial engineering company whose business is largely based on delivering a wide-range of engineering projects. The aim of this study is to create and develop a fairly simple Excel-based tool for the sales department. The tool’s main function is to estimate and visualize the profitability of various small projects. The study also aims to find out other possible and more long-term solutions for tackling the problem in the future. The study is highly constructive and descriptive as it focuses on the development task and in the creation of a new operating model. The developed tool focuses on estimating the profitability of the small orders of the selected project portfolio currently on the bidding-phase (prospects) and will help the case company in the monthly reporting of sales figures. The tool will analyse the profitability of a certain project by calculating its fixed and variable costs, then further the gross margin and operating profit. The bidding phase of small project is a phase that has not been covered fully by the existing tools within the case company. The project portfolio tool can be taken into use immediately within the case company and it will provide fairly accurate estimate of the profitability figures of the recently sold small projects.

Organizational commitment and perceived relatedness as correlates of the intention to continue officiating in track and field

The objectives of the present study were to explore three components of organizational commitment (affective [AC], normative [NC] and continuance [CC] commitment; Allen & Meyer, 1991), perceived relatedness (Oeci & Ryan, 1985; 2002), and behavioural intention (Ajzen, 2002) within the context of volunteer track and field officiating. The objectives were examined in a 2-phase study. Ouring phase 1, experts (N = 10) with domain familiarity assessed the item content relevance and representation of modified organizational commitment (OC; Meyer, Allen & Smith, 1993) and perceived relatedness (La Guardia, Oeci, Ryan & Couchman, 2000) items. Fourteen of 26 (p < .05) items were relevant (Aiken's coefficient V) and NC (M = 3.88, SO = .64), CC (M = 3.63, SD = .52), and relatedness (M = 4.00, SD = .93) items had mean item content-representation ratings of either "good" or "very good" while AC (M = 2.50, SD = 0.58) was rated "fair". Participants in phase 2 (N = 80) responded to items measuring demographic variables, perceptions of OC to Athletics Canada, perceived relatedness to other track and field officials, and a measure of intention (yiu, Au & Tang, 2001) to continue officiating. Internal consistency reliability estimates (Cronbach's (1951) coefficient alpha) were as follows: (a) AC = .78, (b) CC = .85, (c) NC = .80 (d) perceived relatedness = .70 and, (e) intention = .92 in the present sample. Results suggest that the track and field officials felt only minimally committed to Athletics Canada (AC M = 3.90, SD = 1.23; NC M = 2.47, SD = 1.25; CC M = 3.32; SD = 1.34) and that their relationships with other track and field officials were strongly endorsed (M = 5.86, SD = 0.74). Bivariate correlations (Pearson r) indicated that perceived relatedness to other track and field officials demonstrated the strongest relationship with intention to continue officiating (r = .346, p < .05), while dimensions of OC were not significantly related to intention (all p's > .05). Together perceived relatedness (j3 = .339, p = .004), affective commitment (j3 = -.1 53, p = .308), normative commitment (j3 = -.024, p = .864) and continuance commitment (j3 = .186, P = .287) contribute to the prediction of intention to continued officiating (K = .139). These relationships remained unaffected by the inclusion of demographic (j3age = -.02; P years with Athletics Canada = -.13; bothp's > .05) or alternative commitment (j3sport = -.19; P role = .15; Pathletes = .20; all p' s > .05) considerations. Three open-ended questions elicited qualitative responses regarding participants' reasons for officiating. Responses reflecting initial reasons for officiating formed these higher order themes: convenience, helping reasons, extension of role, and intrinsic reasons. Responses reflecting reasons for continuing to officiate formed these higher order themes: track and field, to help, and personal benefits. Responses reflecting changes that would influence continued involvement were: political, organizational/structural, and personal. These results corroborate the findings of previous investigations which state that the reasons underpinning volunteer motivations change over time (Cuskelly et al., 2002). Overall, the results of this study suggest that track and field officials feel minimal commitment to the organization of Athletics Canada but a stronger bond with their fellow officials. Moreover, the degree to which track and field officials feel meaningfully connected to one another appears to exert a positive influence on their intentions to continue officiating. As such, it is suggested that in order to promote continued involvement, Athletics Canada increases its focus on fostering environments promoting positive interactions among officials.

Statistiques 2004-2005 et 2005-2006 des bibliothèques universitaires et de recherche au Canada

Commentaire de M. Timothy Mark Executive Director / Directeur général Canadian Association of Research Libraries / Association des bibliothèques de recherche du Canada. Room / Pièce 239. 65 University Private / 65 université privé. Ottawa ON K1N 9A5 Tel / tél : 613.562.5385 Fax / téléc : 613.562.5195 www.carl-abrc.ca «J'ai lu avec beaucoup d'intêret et d'enthousiasme l'article Statistiques 2004-2005 et 2005 des bibliothèques universitaires et de recherche au Canada qui vient de paraître dans la revue Documentation et bibliothèques. Permettez-moi de vous féliciter, madame, sur un article qui démontre un haut niveau de recherche et d'analyse. A titre d'intérêt, l'article sera mentionné dans notre publication hebdomadaire "Cyberavis" demain. ( Prière de consulter le site web de l'ABRC). Recevez, madame, mes salutations less meilleures. Tim Mark. (Courriel daté du 14 février 2008) ==========================================