993 resultados para Popish Plot, 1678.
Resumo:
The carrier density dependent current-voltage (J V) characteristics of electrochemically prepared poly(3-methylthiophene) (P3MeT) have been investigated in Pt/P3MeT/Al devices, as a function of temperature from 280 to 84 K. In these devices, the charge transport is found to be mainly governed by different transport regimes of space charge limited conduction (SCLC). In a lightly doped device, SCLC controlled by exponentially distributed traps (Vl+1 law, l > 1) is observed in the intermediate voltage range (0.5-2 V) at all temperatures. However, at higher bias (> 2 V), the current deviates from the usual Vl+1 law where the slope is found to be less than 2 of the logJ-logV plot, which is attributed to the presence of the injection barrier. These deviations gradually disappear at higher doping level due to reduction in the injection barrier. Numerical simulations of the Vl+1 law by introducing the injection barrier show good agreement with experimental data. The results show that carrier density can tune the charge transport mechanism in Pt/P3MeT/Al devices to understand the non-Ohmic behavior. The plausible reasons for the origin of injection barrier and the transitions in the transport mechanism with carrier density are discussed. (C) 2015 AIP Publishing LLC.
Resumo:
The change in photo-induced optical properties in thermally evaporated Ge12Sb25Se63 chalcogenide thin film under 532-nm laser illumination has been reported in this paper. The structure and composition of the film have been examined by X-ray diffraction and energy dispersive X-ray analysis, respectively. The optical properties such as refractive index, extinction coefficient and thickness of the films have been determined from the transmission spectra based on inverse synthesis method and the optical band gap has been derived from optical absorption spectra using the Tauc plot. It has been found that the mechanism of the optical absorption is due to allowed indirect transition. The optical band gap increases by 0.05 eV causing photo-bleaching mechanism, while refractive index decreases because of reduction in structural disordering. Deconvolution of Raman and X-ray photoelectron spectra into several peaks provides different structural units, which supports the optical photo-bleaching.
Resumo:
In the case of metallic ferromagnets there has always been a controversy, i.e. whether the magnetic interaction is itinerant or localized. For example SrRuO3 is known to be an itinerant ferromagnet where the spin-spin interaction is expected to be mean field in nature. However, it is reported to behave like Ising, Heisenberg or mean field by different groups. Despite several theoretical and experimental studies and the importance of strongly correlated systems, the experimental conclusion regarding the type of spin-spin interaction in SrRuO3 is lacking. To resolve this issue, we have investigated the critical behaviour in the vicinity of the paramagnetic-ferromagnetic phase transition using various techniques on polycrystalline as well as (001) oriented SrRuO3 films. Our analysis reveals that the application of a scaling law in the field-cooled magnetization data extracts the value of the critical exponent only when it is measured at H -> 0. To substantiate the actual nature without any ambiguity, the critical behavior is studied across the phase transition using the modified Arrott plot, Kouvel-Fisher plot and M-H isotherms. The critical analysis yields self-consistent beta, gamma and delta values and the spin interaction follows the long-range mean field model. Further the directional dependence of the critical exponent is studied in thin films and it reveals the isotropic nature. It is elucidated that the different experimental protocols followed by different groups are the reason for the ambiguity in determining the critical exponents in SrRuO3.
Resumo:
The present experimental work reports the first observations of primary and secondary transitions in the time-averaged flame topology in a non-premixed swirling flame as the geometric swirl number S-G (a non dimensional number used to quantify the intensity of imparted swirl) is varied from a magnitude of zero till flame blowout. First observations of two transition types viz. primary and secondary transitions are reported. The primary transition represents a transformation from yellow straight jet flame (at S-G = 0) to lifted flame with blue base and finally to swirling seated (burner attached) yellow flame. Time-averaged streamline plot obtained from 2D PIV in mid-longitudinal plane shows a recirculation zone (RZ) at the immediate vicinity of burner exit. The lifted flame is stabilized along the vortex core of this RZ. Further, when S-G similar to 1.4-3, the first occurrence of vortex breakdown (VB) induced internal recirculation zone (IRZ) is witnessed. The flame now stabilizes at the upstream stagnation point of the VB-IRZ, which is attached to the burner lip. The secondary transition represents a transformation from a swirling seated flame to swirling flame with a conical tailpiece and finally to a highly-swirled near blowout oxidizer-rich flame. This transition is understood to be the result of transition in vortex breakdown modes of the swirling flow field from dual-ring VB bubble to central toroidal recirculation zone (CTRZ). The physics of transition is described on the basis of modified Rossby number (Ro(m)). Finally, when the swirl intensity is very high i.e. SG similar to 10, the flame blows out due to excessive straining and due to entrainment of large amount of oxidizer due to partial premixing. The present investigation involving changes in flame topology is immensely important because any change in global flame structure causes oscillatory heat release that can couple with dynamic pressure and velocity fluctuations leading to unsteady combustion. In this light, understanding mechanisms of flame stabilization is essential to tackle the problem of thermo-acoustic instability. (C) 2015 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
Resumo:
In the case of metallic ferromagnets there has always been a controversy, i.e. whether the magnetic interaction is itinerant or localized. For example SrRuO3 is known to be an itinerant ferromagnet where the spin-spin interaction is expected to be mean field in nature. However, it is reported to behave like Ising, Heisenberg or mean field by different groups. Despite several theoretical and experimental studies and the importance of strongly correlated systems, the experimental conclusion regarding the type of spin-spin interaction in SrRuO3 is lacking. To resolve this issue, we have investigated the critical behaviour in the vicinity of the paramagnetic-ferromagnetic phase transition using various techniques on polycrystalline as well as (001) oriented SrRuO3 films. Our analysis reveals that the application of a scaling law in the field-cooled magnetization data extracts the value of the critical exponent only when it is measured at H -> 0. To substantiate the actual nature without any ambiguity, the critical behavior is studied across the phase transition using the modified Arrott plot, Kouvel-Fisher plot and M-H isotherms. The critical analysis yields self-consistent beta, gamma and delta values and the spin interaction follows the long-range mean field model. Further the directional dependence of the critical exponent is studied in thin films and it reveals the isotropic nature. It is elucidated that the different experimental protocols followed by different groups are the reason for the ambiguity in determining the critical exponents in SrRuO3.
Resumo:
A new type of pulverized-coal combustor, called "Wall-Protecting-Jets Combustor" (hereafter, WPJC has been proposed, designed and studied with both CFD (Computational Fluid Dynamics) and experimental methods. The WPJC is based on a novel concept in which all inlet jets are along the combustor wall. Pilot combustion experiments were conducted to investigate the combustion performance of WPJC. Two-phase flows and pulverized-coal combustion were simulated to study the mechanism of),WPJC using the commercial software FLUENT. The results show that the WPJC has many remarkable advantages: wall-protection by the cold jets without the use of refractory materials; low-temperature and three-stage combustion with low NOx emission; negligible ash/slag-deposition; multiple functions with convenient switching between them; effective adjustment of the combustion intensity and the ignition position.
Resumo:
Con el objetivo de lograr un tamaño adecuado de muestras, que con cierto grado de precisión nos permita hacer una estimación de la densidad de nematodos, se realizó un muestreo en las fincas, La Breña, ubicada en Jinotepe, María Auxiliadora y El Porvenir, ubicadas en San Marcos (IV región de Nicaragua). El objetivo principal del estudio fue determinar en el cultivo del café un tamaño mínimo de muestras para análisis hematológico que permita obtener mayor precisión en la estimación de sus densidades y a la vez resulte menos costos para el productor en la toma de decisiones para el manejo de nematodos en plantaciones de café establecidas. En cada finca se seleccionó una hectárea tomando 25 plantas al azar, en cada planta se muestrearon 4 sitios y en cada sitio se muestrearon 2 profundidades (15 y 30 cm), totalizando 8 muestras por planta. Los géneros estudiados son: Meloídogyne sp, Pratylencbus sp y Rotylencbulus sp. Los resultados muestran que la situación actual de la población de nematodos se encuentra agregada en las fincas, María Auxiliadora y El Porvenir y uniforme en el caso de la Breña. Se determinó que aceptando un 20% de error se hace necesario muestrear 10 plantas (100 grs de raíz), dos sitios por planta, a una profundidad de 15 cms y las muestras se deben tomar a 15 cm de la base del tallo.
Resumo:
The interactions between poly(vinylpyrrolidone) (PVP) and the reversed micelles composed of water, AOT, and n-heptane are investigated with the aid of phase diagram, measurements of conductivity and viscosity, Fourier transform infrared (FTIR) spectrum, and dynamic light scattering (DLS). The phase diagrams of water/AOT/heptane in the presence of and absence of PVP are given. The conductivity of the water/AOT/heptane reversed micelle without PVP initially increases and then decreases with the increase of water content, ω0 (the molar ratio of water to AOT), while the plots of conductivity (K) versus ω0 of the reversed micelle in the presence of PVP depend on the PVP concentrations. The plot of K versus ω0 with 2.0%wt PVP is similar to that without PVP. Only the ω0,max (the water content that the maximum conductivity corresponds to) is larger than that without PVP. Nevertheless, the conductivity of the reversed micelle containing more than 4%wt PVP always rises with the increase of the water content in the measured range. The DLS results indicate that the hydrodynamic radius (Rh) in the presence and absence of PVP rises with the increase of ω0. The plots with PVP and without PVP have almost the same value when ω0<17; and after that, it quickly increases with the increase of ω0. It is interesting to find that there is almost no effect of the PVP concentration on the viscosity and Rh of the reversed micelle at ω0 = 15. The FTIR results suggest that the contents of SO3--bound water and Na+-bound water both decrease with PVP added, while the content of the bulky-like water increases. However, the trapped water in the hydrophobic chain of the surfactant is nearly unaffected by PVP. It is also found from the FTIR that the carbonyl group stretching vibration of AOT is fitted into two sub-peaks, which center at 1740 and 1729 cm-1, corresponding to the trans and cis conformations of AOT, respectively.
Resumo:
Resumen: El valor estético de la Crónica de tres reyes siempre ha sido puesto en entredicho a raíz de su estilo neutro que contrasta con el de otras obras del género, como ser las crónicas de Alfonso X y las de Pero López de Ayala. El presente trabajo se encarga de estudiar los procedimientos narrativos a través de los cuales algunos de sus personajes son confi gurados en función de asignar a la trama de los acontecimientos un determinado sentido político que se distancia de otras versiones de los hechos que circulaban en el período, como por ejemplo la "Historia hasta 1288 dialogada".
Resumo:
The dynamic behaviour for nanoscale electrostatic actuators is studied. A two Parameter mass-spring model is shown to exhibit a bifurcation from the case excluding an equilibrium point to the case including two equilibrium points as the geometrical dimensions of the device are altered. Stability analysis shows that one is a stable Hopf bifurcation point and the other is an unstable saddle point. In addition, we plot the diagram phases, which have periodic orbits around the Hopf point and a homoclinic orbit passing though the unstable saddle point.
Resumo:
Integran este número de la revista ponencias presentadas en Studia Hispanica Medievalia VIII: Actas de las IX Jornadas Internacionales de Literatura Española Medieval, 2008, y de Homenaje al Quinto Centenario de Amadis de Gaula.
Resumo:
Resumen: Tomando como precepto la idea de que el motivo del viaje sirve de elemento organizador de la materia narrativa en textos como los Cuentos del papagayo, Canterbury Tales o Las mil y una noches, el autor se propone analizar la estructura de El conde Lucanor a la luz del mencionado motivo. El viaje aparece explicitado en el primero y en el último de los relatos, a los que se suma el exemplo XXV, episodio central en el diálogo entre el conde y su ayo. Su análisis lo llevará a develar en los restantes exemplos que este motivo central sirve de nexo de unión entre cada cuento, organiza la trama general en forma de episodios y configura distintos tipos de viajes: escatológico, de ultratumba, iniciático, alegórico, celestial o fantástico. El viaje se ofrece, así, como instrumento portador de sentido, de forma y de estructura en la trama general del marco y, en particular, de cada episodio.
Resumo:
El zapallo Spaghetti, cultivo vigoroso de clima templado, constituye una alternativa productiva interesante y novedosa para nuestro país. El objetivo de este estudio fue evaluar el efecto del mulching y de la densidad sobre el rendimiento total, el peso medio y el calibre de los frutos. El estudio se llevó a cabo en Azul sobre un suelo Argiudol típico en camellones de 0,80 m de ancho con diferentes densidades de siembra. Se realizó una fertilización profunda en bandas de 0,80 m con fosfato diamónico, controlando las malezas en forma química, manual y mecánicamente, y las plagas haciendo aplicaciones preventivas de insecticidas y fungicidas. La siembra manual se efectuó el 2 de noviembre y los tratamientos fueron: densidades de siembra de 20, 15, 10 y 5 mil pl/ha (D1, D2, D3 y D4), con y sin mulching. Se trabajó con 32 parcelas y cada una tenía tres surcos de seis metros de longitud separados entre si por 2m. Se realizaron cuatro cosechas al llegar a la madurez completa (15/2, 29/2, 7/3 y 3/4). Los calibres evaluados fueron: (1) 2,2 kg, (2) 1,7 kg; (3) 1,3 kg y (4) 0,8 kg / fruto. Para el análisis de los datos se utilizó un modelo de bloques completamente aleatorizados con parcelas sub-divididas. En la parcela principal se evaluó el efecto del mulching, en la subparcela la densidad y la interacción de mulching por densidad, y en la subsubparcelas las diferentes cosechas. La cosecha total mostró diferencias significativas para el efecto del mulching, obteniéndose 71,90 t/ha (a) (con mulching) y 62,02 t/ha (b) (sin mulching); para cada densidad se detectaron diferencias significativas para el efecto mulching: D1: 84,45 t/ha (a), D2: 76,47 t/ha (ab); D3: 65,14 t/ha (b) y D4: 61,55 t/ha (b). Se observaron diferencias significativas en el número de frutos cosechados: con mulching (51.667 frutos/ha) y sin mulching (44.167 frutos/ha), y para las diferentes densidades: D1: 54.167 (a); D2: 50.000 (ab); D3: 47.700 (ab) y D4: 40.833 (b) t/ha. La composición de calibres de frutos cosechados fue el mismo para todos los tratamientos y cosechas.
Resumo:
In the present paper, we endeavor to accomplish a diagram, which demarcates the validity ranges for interfacial wave theories in a two-layer system, to meet the needs of design in ocean engineering. On the basis of the available solutions of periodic and solitary waves, we propose a guideline as principle to identify the validity regions of the interfacial wave theories in terms of wave period T, wave height H, upper layer thickness d(1), and lower layer thickness d(2), instead of only one parameter-water depth d as in the water surface wave circumstance. The diagram proposed here happens to be Le Mehautes plot for free surface waves if water depth ratio r = d(1)/d(2) approaches to infinity and the upper layer water density rho(1) to zero. On the contrary, the diagram for water surface waves can be used for two-layer interfacial waves if gravity acceleration g in it is replaced by the reduced gravity defined in this study under the condition of sigma = (rho(2) - rho(1))/rho(2) -> 1.0 and r > 1.0. In the end, several figures of the validity ranges for various interfacial wave theories in the two-layer fluid are given and compared with the results for surface waves.
Resumo:
We propose here a local exponential divergence plot which is capable of providing an alternative means of characterizing a complex time series. The suggested plot defines a time-dependent exponent and a ''plus'' exponent. Based on their changes with the embedding dimension and delay time, a criterion for estimating simultaneously the minimal acceptable embedding dimension, the proper delay time, and the largest Lyapunov exponent has been obtained. When redefining the time-dependent exponent LAMBDA(k) curves on a series of shells, we have found that whether a linear envelope to the LAMBDA(k) curves exists can serve as a direct dynamical method of distinguishing chaos from noise.