Justice for pollution-victims in China and Australia

The concept of environmental justice is well developed in North America, but is still at the evolutionary stage in most other jurisdictions around the globe. This paper seeks to explore two jurisdictions where incidents of environmental justice are likely to be seen in the future as a result of manufacturing and mining practices. The discussion will centre upon avenues to environmental justice for both private citizens and the public at large. The first jurisdiction considered is China, where environmental liability claims brought by Chinese citizens have increased at an annual average of 25% (Yang 2011). Manufacturing is at the core of the Chinese economy and is responsible for some of the unprecedented economic growth in the region. Less discussed are the industry impacts on water and air pollution levels and the associated implications of these pollutants on local communities. China introduced the Tort Liability Law (TLL) in 2010, which may provide avenues to justice for private citizens. The other jurisdiction considered by the paper is Australia, where the mining boom has buffered the Australian economy from the global financial crisis. There is some limited case law in Australia where private citizens have made a claim in toxic torts; however the framework is underdeveloped in terms of the significant risks facing indigenous and local communities in mining areas and also by comparison to the developments of the TLL framework in China. This paper traces the regulatory responses to the affects of major industries on communities in China and Australia. From this it examines the need for environmental justice avenues that align with rule of law principles.

Mathematical relationships for metal build-up on urban road surfaces based on traffic and land use characteristics

The study investigated the influence of traffic and land use parameters on metal build-up on urban road surfaces. Mathematical relationships were developed to predict metals originating from fuel combustion and vehicle wear. The analysis undertaken found that nickel and chromium originate from exhaust emissions, lead, copper and zinc from vehicle wear, cadmium from both exhaust and wear and manganese from geogenic sources. Land use does not demonstrate a clear pattern in relation to the metal build-up process, though its inherent characteristics such as traffic activities exert influence. The equation derived for fuel related metal load has high cross-validated coefficient of determination (Q2) and low Standard Error of Cross-Validation (SECV) values indicates that the model is reliable, while the equation derived for wear-related metal load has low Q2 and high SECV values suggesting its use only in preliminary investigations. Relative Prediction Error values for both equations are considered to be well within the error limits for a complex system such as an urban road surface. These equations will be beneficial for developing reliable stormwater treatment strategies in urban areas which specifically focus on mitigation of metal pollution.

Estimating the burden of disease attributable to lead exposure in South Africa in 2000

Objectives To estimate the burden of disease attributable to lead exposure in South Africa in 2000. Design World Health Organization comparative risk assessment (CRA) methodology was followed. Recent community studies were used to derive mean blood lead concentrations in adults and children in urban and rural areas. Population-attributable fractions were calculated and applied to revised burden of disease estimates for the relevant disease categories for South Africa in the year 2000. Monte Carlo simulation-modelling techniques were used for the uncertainty analysis. Setting South Africa. Subjects Children under 5 and adults 30 years and older. Outcome measures Cardiovascular mortality and disability-adjusted life years (DALYs) in adults 30 years and older and mild mental disability DALYs in children under 5 years. Results Lead exposure was estimated to cause 1 428 deaths (95% uncertainty interval 1 086-1 772) or 0.27% (95% uncertainty interval: 0.21 - 0.34%) of all deaths in South Africa in 2000. Burden of disease attributed to lead exposure was dominated by mild mental disability in young children, accounting for 75% of the total 58 939 (95% uncertainty interval 55 413 - 62 500) attributable DALYs. Cardiovascular disease in adults accounted for the remainder of the burden. Conclusions Even with the phasing out of leaded petrol, exposure to lead from its ongoing addition to paint, paraoccupational exposure and its use in backyard 'cottage industries' will continue to be an important public health hazard in South Africa for decades. Young children, especially those from disadvantaged communities, remain particularly vulnerable to lead exposure and poisoning.

Reducing workplace safety incidents : bridging the gap between safety culture theory and practice

This thesis explored safety culture in a large Australasian construction and mining organisation, with a view to understanding how theory and practice can be integrated to improve safety culture and related outcomes within the industry. The research comprised three studies that investigated the relationship between safety culture, safety motivation, leadership and safety behaviour, and examined differences in perceptions of safety culture across the organisation. Research methodologies and samples included a modified Delphi method with safety leaders (n=41), a quantitative survey with a cross-section of the organisation (n=2,957), and group interviews with frontline supervisors and workers (n=29).

Automation of underground truck haulage

This paper reviews the state-of-the art in the automation of underground truck haulage. Past attemps at automating LHDs and haul trucks are described and their particular strengths and weaknesses are listed. We argue that the simple auto-tram...

Molecular recognition of 2,4,6-trinitrotoluene by 6-aminohexanethiol and surface-enhanced Raman scattering sensor

2,4,6-trinitrotoluene (TNT) is one of the most commonly used nitro aromatic explosives in landmine, military and mining industry. This article demonstrates rapid and selective identification of TNT by surface-enhanced Raman spectroscopy (SERS) using 6-aminohexanethiol (AHT) as a new recognition molecule. First, Meisenheimer complex formation between AHT and TNT is confirmed by the development of pink colour and appearance of new band around 500 nm in UV-visible spectrum. Solution Raman spectroscopy study also supported the AHT:TNT complex formation by demonstrating changes in the vibrational stretching of AHT molecule between 2800-3000 cm−1. For surface enhanced Raman spectroscopy analysis, a self-assembled monolayer (SAM) of AHT is formed over the gold nanostructure (AuNS) SERS substrate in order to selectively capture TNT onto the surface. Electrochemical desorption and X-ray photoelectron studies are performed over AHT SAM modified surface to examine the presence of free amine groups with appropriate orientation for complex formation. Further, AHT and butanethiol (BT) mixed monolayer system is explored to improve the AHT:TNT complex formation efficiency. Using a 9:1 AHT:BT mixed monolayer, a very low detection limit (LOD) of 100 fM TNT was realized. The new method delivers high selectivity towards TNT over 2,4 DNT and picric acid. Finally, real sample analysis is demonstrated by the extraction and SERS detection of 302 pM of TNT from spiked.

Corporate Social Responsibility Assurance: Theory, Regulations and Practice in China

This chapter aims to provide a comprehensive understanding of the theory, regulations and practice of corporate social responsibility (CSR) assurance in China. Built on stakeholder and related theories, it employs a demand-and-supply analytical framework to illustrate the development and current status of China’s CSR assurance market. It finds that government agencies, stock exchanges, accounting standard setters and industrial associations have collectively shaped the current regulatory framework on CSR reporting and assurance in China. Regarding demand, differences in the social and legal environments across such a large country influence the regional development of CSR assurance. Industries under intensive CSR regulations and/or social reporting pressure—for example, the finance, aviation and mining industries—more actively achieve CSR report assurance. Regarding supply, the CSR assurance market in China is shared by accounting firms and professional certification bodies. Different assurance standards adopted by the two streams of assurance providers have different foci, potentially leading to different assurance coverage and emphases.

Direct precipitation of lead zirconate titanate by the hydrothermal method

Direct precipitation of fine powders of lead zirconate titanate (PZT) in the complete range of solid solution, is investigated under hydrothermal conditions, starting from lead oxide and titania/zirconia mixed gels. The perovskite phase is formed in the temperature range of 165 – 340°C. Sequence of the hydrothermal reactions is studied by identifying the intermediate phases. The initial formation of PbO: TiO2 solid solution is followed by the reaction of the same with the remaining mixed gels giving rise to X-ray amorphous PZT phase. Further, through crystallite growth, the X-ray crystalline PZT is formed. This method can be extended for the preparation of PLZT powder as well. The resulting powders are sinterable to high density ceramics.

Using lead sulphate instead of lead oxide in flux growth of yttrium iron garnet(YIG) crystals

Crystal growth of YIG from fluxes containing lead sulphate in place of lead oxide in the usual lead oxide-lead fluoride-boron oxide flux system has been tried. Lead sulphate decomposes during crystal growth giving lead oxide and sulphur trioxide. Due to the influence of sulphur trioxide in the system the yield of crystals almost doubles. There is no change either in the morphology of the crystals or their lattice parameter. It is possible that solubility of YIG is different in the new flux and the changed solubility causes the increase in yield of crystals.

Combining propensity and influence models for product adoption prediction

This paper studies the problem of selecting users in an online social network for targeted advertising so as to maximize the adoption of a given product. In previous work, two families of models have been considered to address this problem: direct targeting and network-based targeting. The former approach targets users with the highest propensity to adopt the product, while the latter approach targets users with the highest influence potential – that is users whose adoption is most likely to be followed by subsequent adoptions by peers. This paper proposes a hybrid approach that combines a notion of propensity and a notion of influence into a single utility function. We show that targeting a fixed number of high-utility users results in more adoptions than targeting either highly influential users or users with high propensity.

Synthesis, Reactivity and Biological Activity of 17β-HSD1 Inhibitors Based on a Thieno[2,3-d]pryrimidin-4(3H)-one Core

Breast cancer is the most common cancer in women in Western countries. In the early stages of development most breast cancers are hormone-dependent, and estrogens, especially estradiol, have a pivotal role in their development and progression. One approach to the treatment of hormone-dependent breast cancers is to block the formation of the active estrogens by inhibiting the action of the steroid metabolising enzymes. 17beta-Hydroxysteroid dehydrogenase type 1 (17beta-HSD1) is a key enzyme in the biosynthesis of estradiol, the most potent female sex hormone. The 17beta-HSD1 enzyme catalyses the final step and converts estrone into the biologically active estradiol. Blocking 17beta-HSD1 activity with a specific enzyme inhibitor could provide a means to reduce circulating and tumour estradiol levels and thus promote tumour regression. In recent years 17beta-HSD1 has been recognised as an important drug target. Some inhibitors of 17beta-HSD1 have been reported, however, there are no inhibitors on the market nor have clinical trials been announced. The majority of known 17beta-HSD1 inhibitors are based on steroidal structures, while relatively little has been reported on non-steroidal inhibitors. As compared with 17beta-HSD1 inhibitors based on steroidal structures, non-steroidal compounds could have advantages of synthetic accessibility, drug-likeness, selectivity and non-estrogenicity. This study describes the synthesis of large group of novel 17beta-HSD1 inhibitors based on a non-steroidal thieno[2,3-d]pyrimidin-4(3H)-one core. An efficient synthesis route was developed for the lead compound and subsequently employed in the synthesis of thieno[2,3-d]pyrimidin-4(3H)-one based molecule library. The biological activities and binding of these inhibitors to 17beta-HSD1 and, finally, the quantitative structure activity relationship (QSAR) model are also reported. In this study, several potent and selective 17beta-HSD1 inhibitors without estrogenic activity were identified. This establishment of a novel class of inhibitors is a progressive achievement in 17beta-HSD1 inhibitor development. Furthermore, the 3D-QSAR model, constructed on the basis of this study, offers a powerful tool for future 17beta-HSD1 inhibitor development. As part of the fundamental science underpinning this research, the chemical reactivity of fused (di)cycloalkeno thieno[2,3-d]pyrimidin-4(3H)-ones with electrophilic reagents, i.e. Vilsmeier reagent and dimethylformamide dimethylacetal, was investigated. These findings resulted in a revision of the reaction mechanism of Vilsmeier haloformylation and further contributed to understanding the chemical reactivity of this compound class. This study revealed that the reactivity is dependent upon a stereoelectronic effect arising from different ring conformations.

Reaction of sulphuryl chlorofluoride with a few metals and metal oxides

Sulphuryl chlorofluoride has no observable reaction with metals and metal oxides at room temperature. Metals like copper, silver, iron, and zinc react with the chlorofluoride in the temperature range 200–400°C. Metal chlorides, metal fluorides and sulphur dioxide are the main products of these reactions. With the corresponding metal oxides, on the other hand, the respective metal sulphates are formed in addition to the metal chlorides and fluorides. In the case of lead and lead oxide, lead chlorofluoride is formed instead of lead chloride and lead fluoride. Sulphuryl fluoride is formed in small quantities in all these reactions by the decomposition of the chlorofluoride. Glass is not attacked by sulphuryl chlorofluoride below 500°C.

Res Communis? A critical legal geography of outer space, Antarctica, and the deep seabed

This chapter provides a critical legal geography of outer Space, charting the topography of the debates and struggles around its definition, management, and possession. As the emerging field of critical legal geography demonstrates, law is not a neutral organiser of space, but is instead a powerful cultural technology of spatial production. Drawing on legal documents such as the Outer Space Treaty and the Moon Treaty, as well as on the analogous and precedent-setting legal geographies of Antarctica and the deep seabed, the chapter addresses key questions about the legal geography of outer Space, questions which are of growing importance as Space’s available satellite spaces in the geostationary orbit diminish, Space weapons and mining become increasingly viable, Space colonisation and tourism emerge, and questions about Space’s legal status grow in intensity. Who owns outer Space? Who, and whose rules, govern what may or may not (literally) take place there? Is the geostationary orbit the sovereign property of the equatorial states it supertends, as these states argued in the 1970s? Or is it a part of the res communis, or common property of humanity, which currently legally characterises outer Space? Does Space belong to no one, or to everyone? As challenges to the existing legal spatiality of outer Space emerge from spacefaring states, companies, and non-spacefaring states, it is particularly critical that the current spatiality of Space is understood and considered.

Study on Young's modulus and microhardness of carbon nanotubes reinforced copper nanocomposite

Carbon nanotubes (CNTs) were discovered by Iijima in 1991 as the fourth form of carbon. Carbon nanotubes are the ultimate form of the carbon fibre because of its high Young's modulus in the order of 1 TPa, which is very useful for load transfer in nanocomposites. In the present work, CNT/Cu nanocomposites were fabricated by the powder metallurgy technique, and after extrusion of the nanocomposites, bright field transmission electron microscopic studies were carried out. From the transmission electron microscopic images obtained, a novel method of ascertaining the Young's modulus of multiwalled CNTs is worked out in the present paper, which turns out to be 0.94 TPa, which is consistent with experimental results. Furthermore, an attempt is made to investigate the microhardness of copper by reinforcing it with multiwalled CNTs. There is an increase in hardness by twofold in CNT/Cu nanocomposites as compared to pure Cu matrix. This is due to high relative density, even distribution of CNTs and proper bonding at CNT/Cu interfaces.