Recommendations for Creating and Implementing Climate Change Mitigation Strategies for Municipalities

The effects of climate change are beginning to show themselves globally and not enough is being done to counteract these changes. Institutional action is a necessity, and municipalities have an opportunity to fill this void by developing mitigation strategies that will reduce greenhouse gas emissions. This report critically reviews the municipal climate action plans for Portland, Oregon; Boulder, Colorado; and Toronto, Ontario and provides recommendations for other municipalities who wish to create and implement climate change mitigation plans.

Selective SWIFT-R. A Flexible Software-Based Technique for Soft Error Mitigation in Low-Cost Embedded Systems

Commercial off-the-shelf microprocessors are the core of low-cost embedded systems due to their programmability and cost-effectiveness. Recent advances in electronic technologies have allowed remarkable improvements in their performance. However, they have also made microprocessors more susceptible to transient faults induced by radiation. These non-destructive events (soft errors), may cause a microprocessor to produce a wrong computation result or lose control of a system with catastrophic consequences. Therefore, soft error mitigation has become a compulsory requirement for an increasing number of applications, which operate from the space to the ground level. In this context, this paper uses the concept of selective hardening, which is aimed to design reduced-overhead and flexible mitigation techniques. Following this concept, a novel flexible version of the software-based fault recovery technique known as SWIFT-R is proposed. Our approach makes possible to select different registers subsets from the microprocessor register file to be protected on software. Thus, design space is enriched with a wide spectrum of new partially protected versions, which offer more flexibility to designers. This permits to find the best trade-offs between performance, code size, and fault coverage. Three case studies have been developed to show the applicability and flexibility of the proposal.

Benthic community recovery from brine impact after the implementation of mitigation measures

In many regions, seawater desalination is a growing industry that has its impact on benthic communities. This study analyses the effect on benthic communities of a mitigation measure applied to a brine discharge, using polychaete assemblages as indicator. An eight-year study was conducted at San Pedro del Pinatar (SE Spain) establishing a grid of 12 sites at a depth range of 29–38 m during autumn. Brine discharge started in 2006 and produced a significant decrease in abundance, richness and diversity of polychaete families at the location closest to the discharge, where salinity reached 49. In 2010, a diffuser was deployed at the end of the pipeline in order to increase the mixing, to reduce the impact on benthic communities. After implementation of this mitigation measure, the salinity measured close to discharge was less than 38.5 and a significant recovery in polychaete richness and diversity was detected, to levels similar to those before the discharge. A less evident recovery in abundance was also observed, probably due to different recovery rates of polychaete families. Some families like Paraonidae and Magelonidae were more tolerant to this impact. Others like Syllidae and Capitellidae recovered quickly, although still affected by the discharge, while some families such as Sabellidae and Cirratulidae appeared to recover more slowly.

Efficient Mitigation of Data and Control Flow Errors in Microprocessors

The use of microprocessor-based systems is gaining importance in application domains where safety is a must. For this reason, there is a growing concern about the mitigation of SEU and SET effects. This paper presents a new hybrid technique aimed to protect both the data and the control-flow of embedded applications running on microprocessors. On one hand, the approach is based on software redundancy techniques for correcting errors produced in the data. On the other hand, control-flow errors can be detected by reusing the on-chip debug interface, existing in most modern microprocessors. Experimental results show an important increase in the system reliability even superior to two orders of magnitude, in terms of mitigation of both SEUs and SETs. Furthermore, the overheads incurred by our technique can be perfectly assumable in low-cost systems.

A first approach to earthquake damage estimation in Haiti: advices to minimize the seismic risk

This study is in the frame of the cooperative line that several Spanish Universities and other foreign partners started with the Haitian government in 2010. According to our studies (Benito et al. in An evaluation of seismic hazard in La Hispaniola, after the 2010 Haiti earthquake, 33rd General Assembly of the European Seismological Commission, Moscow, Russia, 2012) and recent scientific literature, the earthquake hazard in Haiti remains high (Calais et al. in Nat Geosci 3:794–799, 2010). In view of this, we wonder whether the country is currently ready to face another earthquake. In this sense, we estimated several damage scenarios in Port-au-Prince and Cap-Haitien associated to realistic possible major earthquakes. Our findings show that almost 50 % of the building stock of both cities would result uninhabitable due to structural damage. Around 80 % of the buildings in both cities have reinforced concrete structure with concrete block infill; however, the presence of masonry buildings becomes significant (between 25 and 45 % of the reinforced concrete buildings) in rural areas and informal settlements on the outskirts, where the estimated damage is higher. The influence of the soil effect on the damage spatial distribution is evident in both cities. We have found that the percentage of uninhabitable buildings in soft soil areas may be double the percentage obtained in nearby districts located in hard soil. These results reveal that a new seismic catastrophe of similar or even greater consequences than the 2010 Haiti earthquake might happen if the earthquake resilience is not improved in the country. Nowadays, the design of prevention actions and mitigation policies is the best instrument the society has to face seismic risk. In this sense, the results of this research might contribute to define measures oriented to earthquake risk reduction in Haiti, which should be a real priority for national and international institutions.

A Hardware-Software Approach for On-Line Soft Error Mitigation in Interrupt-Driven Applications

Integrity assurance of configuration data has a significant impact on microcontroller-based systems reliability. This is especially true when running applications driven by events which behavior is tightly coupled to this kind of data. This work proposes a new hybrid technique that combines hardware and software resources for detecting and recovering soft-errors in system configuration data. Our approach is based on the utilization of a common built-in microcontroller resource (timer) that works jointly with a software-based technique, which is responsible to periodically refresh the configuration data. The experiments demonstrate that non-destructive single event effects can be effectively mitigated with reduced overheads. Results show an important increase in fault coverage for SEUs and SETs, about one order of magnitude.

An Assessment of US Progress towards its Pledge on Climate Change Mitigation. CEPS ECP Report No. 12, 15 October 2012

In 2009, President Obama pledged that, by 2020, the United States would achieve reductions in greenhouse gas emissions of 17% from 2005 levels. With the failure of Congress to adopt comprehensive climate legislation in 2010, the feasibility of the pledge was put in doubt. However, we find that the United States is near to reaching this goal: the country is currently on course to achieve reductions of 16.3% from 2005 levels in 2020. Three factors contribute to this outcome: greenhouse gas regulations under the Clean Air Act, secular trends including changes in relative fuel prices and energy efficiency and sub-national efforts. Perhaps even more surprising, domestic emissions are probably lower than would have been the case if the Waxman-Markey cap-and-trade proposal had become law in 2010. At this point, however, the United States is expected to fail to meet its financing commitments under the Copenhagen Accord for 2020.

EU Policy on Climate Change Mitigation since Copenhagen and the Economic Crisis. CEPS Working Document No. 380, 5 March 2013

The EU has long assumed leadership in advancing domestic and international climate change policy. While pushing its partners in international negotiations, it has led the way in implementing a host of domestic measures, including a unilateral and legally binding target, an ambitious policy on renewable energy and a strategy for low-carbon technology deployment. The centrepiece of EU policy, however, has been the EU Emissions Trading System (ETS), a cap-and-trade programme launched in 2005. The ETS has been seen as a tool to ensure least-cost abatement, drive EU decarbonisation and develop a global carbon market. After an initial review and revision of the ETS, to come into force in 2013, there was a belief that the new ETS was ‘future-proof’, meaning able to cope with the temporary lack of a global agreement on climate change and individual countries’ emission ceilings. This confidence has been shattered by the simultaneous ‘failure’ of Copenhagen to deliver a clear prospect of a global (top-down) agreement and the economic crisis. The lack of prospects for national caps at the international level has led to a situation whereby many member states hesitate to pursue ambitious climate change policies. In the midst of this, the EU is assessing its options anew. A number of promising areas for international cooperation exist, all centred on the need to ‘raise the ambition level’ of GHG emission reductions, notably in aviation and maritime, short-lived climate pollutions, deforestation, industrial competitiveness and green growth. Public policy issues in the field of technology and its transfer will require more work to identify real areas for cooperation.

Institutional Moral Hazard in the Multi-tiered Regulation of Unemployment and Social Assistance Benefits. CEPS Special Report No. 137/April 2016 Wednesday, 27 April 2016

This paper studies eight countries in which the regulation of unemployment benefits and related benefits and the concomitant activation of unemployed individuals has a multi-tiered architecture. It assesses their experiences and tries to understand possible problems of ‘institutional moral hazard’ that may emerge in the context of a hypothetical European Unemployment Benefit Scheme.

Understanding driver performance variability and perception of risk: driver hazard perception research plan.

Federal Highway Administration, Washington, D.C.

Radon mitigation update.

Mode of access: Internet.

Fact book : National Priorities List under the original Hazard Ranking System, 1981 - 1991.

Mode of access: Internet.

Chemical hazard communication.

Mode of access: Internet.