Improving ERP change tool processes to align business processes and ERP system

Nopea teknologian kehitys sekä kansainvälistymisen mukana tuoma kilpailupaine pakottavat yritykset jatkuvaan liiketoimintaprosessien kehittämiseen. Muutoksista organisaation rakenteissa sekä yrityksen prosesseissa on tullut yleisiä toimenpiteitä. Yksi näkyvimmistä toiminnallisista uudistuksesta on ollut toiminnanohjausjärjestelmän käyttöönotto. Toiminnanohjausjärjestelmän rakenne ja kehitys aiheuttaa yleensä suurimmat vaikeudet pyrittäessä rakentamaan liiketoimintaprosessien läpinäkyvyyttä esittävä tietojärjestelmäympäristö. Tässä tutkimuksessa liiketoiminnan sekä toiminnanohjausjärjestelmän prosessien yhdistäminen on tehty ns. toiminnanohjausjärjestelmä muutostyökaluilla. Kyseiset muutostyökalut on järjestetty yrityksissä tietojärjestelmä ympäristöön ja niiden avulla voidaan korjata teknisiä ongelmia sekä muuttaa itse prosesseja. Tutkimuksen empiria osuudessa on käytetty case-tutkimusmenetelmää Kone Oyj:n prosessien kehittämisosastolla. Tutkimuksen tavoitteena oli parantaa toiminnanohjausjärjestelmän muutostyökalujen prosesseja, liiketoimintaprosessien sekä toiminnanohjausjärjestelmän yhdistämiseksi ja harmonisoimiseksi. Tutkimuksen tavoitteiden täyttämiseksi, prosessijohtamisen käsitteitä käytettiin muutostyökaluprosessien parannusehdotusten löytymiseksi. Prosessijohtamisen käsitteet tarkoittavat prosessikartan, prosessin toimintojen, sekä prosessin kustannusten tutkimista ja hyväksikäyttöä. Prosessijohtamisen käsitteeseen kuuluu myös liiketoimintaprosessien jatkuvan parantamisen sekä uudelleenjärjestämisen mallien kuvaus. Toiminnanohjausjärjestelmäympäristön kuvaus teorian toisena osuutena antaa pohjaa muutostyökalujen prosessien käytölle. Tutkimuksen tuloksina voidaan todeta että tutkimusalue on hyvin monimutkainen ja vaikea. Toimintajärjestelmistä ei ole kirjoitettu teoriaa kovinkaan runsaasti, lukuunottamatta yritysten itse tekemiä tutkimuksia. Tutkimuksessa tarkasteltaville prosesseille löytyi kuitenkin parannusehdotuksia sekä ns. optimaalisen prosessimallin ominaisuuksia.

GPS-signal Source Based on Direct Digital Synthesis

This thesis presents the design and implementation of a GPS-signal source suitable for receiver measurements. The developed signal source is based on direct digital synthesis which generates the intermediate frequency. The intermediate frequency is transfered to the final frequency with the aid of an Inphase/Quadrature modulator. The modulating GPS-data was generated with MATLAB. The signal source was duplicated to form a multi channel source. It was shown that, GPS-signals ment for civil navigation are easy to generate in the laboratory. The hardware does not need to be technically advanced if navigation with high level of accuracy is not needed. It was also shown that, the Inphase/Quadrature modulator can function as a single side band upconverter even with a high intermediate frequency. This concept reduces the demands required for output filtering.

Sales lead management in a global enterprise

Many companies today struggle with problems they face around sales lead management. They are suffering from inconsistent quality of leads, they miss clear sales opportunities and even cannot handle well their internal marketing lists. Meanwhile customers are better and better equipped with means to easily initiate contact via internet, via call centers etc. Investing in lead generation activities that are built on a bad process is not a good idea. Better than asking how to get more leads, companies should ask how to get better quality leads and invest in improving lead management. This study looks sales lead management as a multi step process where a company generates leads in controlled environment, qualifies them and hands over to the sales cycle. As a final step, organization needs to analyze the incomes and successes of different lead sources. Most often in sales lead management a process improvement requires setting up additional controls to enable proper tracking of all leads. A sales lead management process model for the case company is built based on the findings. Implementing the new model involves changes and improvements in some key areas of current process. Starting from the very beginning, these include redefining a bit the lead definition and revising the criteria set for qualified lead. There are some improvements to be done in the system side to enable the proposed model. Lastly a setting for responsible roles is presented.

System Investigation for Hybrid Electric Vehicle

A hybrid electric vehicle is a fast-growing concept in the field of vehicle industry. Nowadays two global problems make manufactures to develop such systems. These problems are: the growing cost of a fuel and environmental pollution. Also development of controlled electric drive with high control accuracy and reliability allows improving of vehicle drive characteristics. The objective of this Diploma Thesis is to investigate the possibilities of electrical drive application for new principle of parallel hybrid vehicle system. Electric motor calculations, selection of most suitable control system and other calculations are needed. This work is not final work for such topic. Further investigation with more precise calculations, modeling, measurements and cost calculations are needed to answer the question if such system is efficient.

Supporting Solution Business with an Integrated Enterprise System

Some of the world’s leading companies now compete by providing integrated solutions to identify and solve each customer’s business problem by providing services to design, integrate, operate and finance a product or system during its life cycle. At the same time, because of the requirements of new global economy, companies are implementing new integrated ERP systems. The objective of this thesis was to define how solution offering can be implemented in the integrated ERP system so that it is possible to sell, deliver and maintain solution offering with the new enterprise applications. The research was conducted as a qualitative case study research consisting of literature review, theme-interviews and an analysis phase. For a start this study introduces new insight for combining solution business, offering modeling and modern ERP system theories. The results of this research illustrate the limitations of an integrated ERP system to support solution business and show the need to develop a commercial product model in order to improve the combination of solution offering and IT systems.

Carbono do solo e a mitigação da mudança climática global

The soils of the world contain more carbon than the combined total amounts occurring in vegetation and the atmosphere. Hence soils are a major reservoir of carbon in terrestrial ecosystems and an important sink. Recently, emphasis has been placed on the need to sequester carbon from atmospheric carbon dioxide into soil organic matter because of international concerns about greenhouse gas emissions and global climate change. The best strategies to built-up carbon stocks in the soil are basically those that increase the input of organic matter to the soil, and/or decrease the rate of soil organic matter decomposition. Grain crop systems based on soil ploughing and harrowing lead to CO2 emissions combined with tremendous soil losses. In Brazil, no-tillage system was introduced to combat soil erosion by water and this soil management led to the build-up of soil carbon stocks with simultaneous high crop yields. However, the present procedure used to quantify carbon stocks in soils is laborious and of high cost. The use of infrared spectroscopy is very promising as an alternative low-cost method of soil carbon determination.

Pharmaceuticals occurrence in a WWTP with significant industrial contribution and its input into the river system

Occurrence and removal of 81 representative Pharmaceutical Active Compounds (PhACs) were assessed in a municipal WWTP located in a highly industrialized area, with partial water reuse after UV tertiary treatment and discharge to a Mediterranean river. Water monitoring was performed in an integrated way at different points in the WWTP and river along three seasons. Consistent differences between therapeutic classes were observed in terms of influent concentration, removal efficiencies and seasonal variation. Conventional (primary and secondary) treatment was unable to completely remove numerous compounds and UV-based tertiary treatment played a complementary role for some of them. Industrial activity influence was highlighted in terms of PhACs presence and seasonal distribution. Even if global WWTP effluent impact on the studied river appeared to be minor, PhACs resulted widespread pollutants in river waters. Contamination can be particularly critical in summer in water scarcity areas, when water flow decreases considerably

Success factors of customer and supplier master data system

Especially in global enterprises, key data is fragmented in multiple Enterprise Resource Planning (ERP) systems. Thus the data is inconsistent, fragmented and redundant across the various systems. Master Data Management (MDM) is a concept, which creates cross-references between customers, suppliers and business units, and enables corporate hierarchies and structures. The overall goal for MDM is the ability to create an enterprise-wide consistent data model, which enables analyzing and reporting customer and supplier data. The goal of the study was defining the properties and success factors of a master data system. The theoretical background was based on literature and the case consisted of enterprise specific needs and demands. The theoretical part presents the concept, background, and principles of MDM and then the phases of system planning and implementation project. Case consists of background, definition of as is situation, definition of project, evaluation criterions and concludes the key results of the thesis. In the end chapter Conclusions combines common principles with the results of the case. The case part ended up dividing important factors of the system in success factors, technical requirements and business benefits. To clarify the project and find funding for the project, business benefits have to be defined and the realization has to be monitored. The thesis found out six success factors for the MDM system: Well defined business case, data management and monitoring, data models and structures defined and maintained, customer and supplier data governance, delivery and quality, commitment, and continuous communication with business. Technical requirements emerged several times during the thesis and therefore those can’t be ignored in the project. Conclusions chapter goes through these factors on a general level. The success factors and technical requirements are related to the essentials of MDM: Governance, Action and Quality. This chapter could be used as guidance in a master data management project.

Production planning development in global manufacturing company

Larox Corporation is a provider of full service filtration in solid and liquid separation. Larox develops, designs, manufactures and supplies industrial filters. By Larox’s continuous development principle, a project for more efficient production was started. At the same time production planning was taken under review. Aim for this Master’s thesis was to find software designed for production planning purposes replacement for old Microsoft Excel based method. In this Master’s thesis current way of production planning was thoroughly analyzed and improvement targets were specified and also requirements for new software were assigned. Primary requirements for new software were possibility to production scheduling, planning, follow-up and also for long-time capacity planning and tracking. Also one demand was that new software should have data link to Larox’s current ERP-system. Result of this Master’s thesis was to start using Larox’s ERP-system also for production planning purposes. New mode of operation fulfils all requirements which were placed to new system. By using new method of production planning, production planners can get more easier and reliable data than from current system.

Potential impact of the global climate changes on the spatial distribution of areas of risk for the occurrence of eucalyptus rust in Brazil

Rust, caused by Puccinia psidii, is one of the most important diseases affecting eucalyptus in Brazil. This pathogen causes disease in mini-clonal garden and in young plants in the field, especially in leaves and juvenile shoots. Favorable climate conditions for infection by this pathogen in eucalyptus include temperature between 18 and 25 ºC, together with at least 6-hour leaf wetness periods, for 5 to 7 consecutive days. Considering the interaction between the environment and the pathogen, this study aimed to evaluate the potential impact of global climate changes on the spatial distribution of areas of risk for the occurrence of eucalyptus rust in Brazil. Thus, monthly maps of the areas of risk for the occurrence of this disease were elaborated, considering the current climate conditions, based on a historic series between 1961 and 1990, and the future scenarios A2 and B2, predicted by IPCC. The climate conditions were classified into three categories, according to the potential risk for the disease occurrence, considering temperature (T) and air relative humidity (RH): i) high risk (18 < T < 25 ºC and RH > 90%); ii) medium risk (18 < T < 25 ºC and RH < 90%; T< 18 or T > 25 ºC and RH > 90%); and iii) low risk (T < 18 or T > 25 ºC and RH < 90%). Data about the future climate scenarios were supplied by GCM Change Fields. In this study, the simulation model Hadley Centers for Climate Prediction and Research (HadCm3) was adopted, using the software Idrisi 32. The obtained results led to the conclusion that there will be a reduction in the area favorable to eucalyptus rust occurrence, and such a reduction will be gradual for the decades of 2020, 2050 and 2080 but more marked in scenario A2 than in B2. However, it is important to point out that extensive areas will still be favorable to the disease development, especially in the coldest months of the year, i.e., June and July. Therefore, the zoning of areas and periods of higher occurrence risk, considering the global climate changes, becomes important knowledge for the elaboration of predicting models and an alert for the integrated management of this disease.

Development of a measuring-control system for energy monitoring in low power

In this thesis a control system for an intelligent low voltage energy grid is presented, focusing on the control system created by using a multi-agent approach which makes it versatile and easy to expand according to the future needs. The control system is capable of forecasting the future energy consumption and decisions making on its own without human interaction when countering problems. The control system is a part of the St. Petersburg State Polytechnic University’s smart grid project that aims to create a smart grid for the university’s own use. The concept of the smart grid is interesting also for the consumers as it brings new possibilities to control own energy consumption and to save money. Smart grids makes it possible to monitor the energy consumption in real-time and to change own habits to save money. The intelligent grid also brings possibilities to integrate the renewable energy sources to the global or the local energy production much better than the current systems. Consumers can also sell their extra power to the global grid if they want.

Pipework data in design system integration

This thesis work describes the creation of a pipework data structure for design system integration. Work is completed in pulp and paper plant delivery company with global engineering network operations in mind. User case of process design to 3D pipework design is introduced with influence of subcontracting engineering offices. Company data element list is gathered by using key person interviews and results are processed into a pipework data element list. Inter-company co-operation is completed in standardization association and common standard for pipework data elements is found. As result inter-company created pipework data element list is introduced. Further list usage, development and relations to design software vendors are evaluated.

The Global War on Terrorism in the Horn of Africa

Ever since Siad Barre’s regime was toppled in the beginning of the 1990’s Somalia has been without an effective central government. As a result Somalia has remained in an anarchic condition of state collapse for nearly two decades. This anarchy has often been put forward as a potential breeding ground for terrorism. As a response to this threat the United States has undertaken several policies, initiatives, and operations in the Horn of Africa generally and in Somalia specifically. In this descriptive study a twofold analysis has been undertaken. First, conditions in present day Somalia as well as Somali history have been analyzed to evaluate the potential Somalia holds as a terrorist base of operations or a recruiting- or staging area. Second, US strategies and actions have been analyzed to evaluate the adequacy of the US response to the threat Somalia poses in terms of terrorism. Material for the analyses have been derived from anthropological, political, and security studies dealing with Somalia. This material has been augmented by a wide range of news coverage, western and non-western. Certain different US policy documents from different levels have been chosen to represent US strategies for the Global War on Terrorism. Because Somali social institutions, such as the clan system, hold great weight in Somali society, Somalia is a difficult area of operations for terrorist networks. In addition the changing nature of Somali alliances and the tangled webs of conflict that characterize present day Somalia aggravate the difficulties that foreign terrorist networks would encounter in Somalia, would they choose to try to utilize it in any great extent. The US has taken potential terrorism threats in Africa and specifically Somalia very seriously. US actions in Somalia have mainly focused on apprehending or neutralizing terror suspects. Such policies, coupled with backing the Ethiopian invasion of Somalia may have actually turned out increasing Somalia’s terror potential.

A Test Bed Applied Mobile Robot Navigation

It is presented a test bed applied to studies on dynamics, control, and navigation of mobile robots. A cargo ship scale model was chosen, which can be radio-controlled or operated autonomously through an embedded control system. A control program, which manages on board mission execution, is implemented on a microcontroller. Navigation is based on an electronic compass, which includes automatic compensation for pitch and roll motions. Heading control loop is based on this sensor, and on a rudder positioning system. A propulsion control system is also implemented. Typical manoeuvres as the turning test and "zig-zag", were implemented and tested. They are included on a manoeuvre library, and can be accessed independently or in combined modes. The embedded system is also in charge of signal acquisition and storing during the missions. It is possible to analyse experiments on identification of ship dynamics, control, and navigation, through the data transferred to a PC by serial communication. Navigation is going to be improved by including inertial sensors on board, and a DGPS. Preliminary tests are aimed to ship identification, and manoeuvrability, using free model tests. Future steps include extending this system for developing other mobile robots as, ROVs, AUVs, and aerial vehicles.