The security and privacy of usage policies and provenance logs in an Information Accountability Framework

The potential benefits of shared eHealth records systems are promising for the future of improved healthcare. However, the uptake of such systems is hindered by concerns over the security and privacy of patient information. The use of Information Accountability and so called Accountable-eHealth (AeH) systems has been proposed to balance the privacy concerns of patients with the information needs of healthcare professionals. However, a number of challenges remain before AeH systems can become a reality. Among these is the need to protect the information stored in the usage policies and provenance logs used by AeH systems to define appropriate use of information and hold users accountable for their actions. In this paper, we discuss the privacy and security issues surrounding these accountability mechanisms, define valid access to the information they contain, discuss solutions to protect them, and verify and model an implementation of the access requirements as part of an Information Accountability Framework.

Novel solutions for a model of wound healing angiogenesis

We prove the existence of novel, shock-fronted travelling wave solutions to a model of wound healing angiogenesis studied in Pettet et al (2000 IMA J. Math. App. Med. 17 395–413) assuming two conjectures hold. In the previous work, the authors showed that for certain parameter values, a heteroclinic orbit in the phase plane representing a smooth travelling wave solution exists. However, upon varying one of the parameters, the heteroclinic orbit was destroyed, or rather cut-off, by a wall of singularities in the phase plane. As a result, they concluded that under this parameter regime no travelling wave solutions existed. Using techniques from geometric singular perturbation theory and canard theory, we show that a travelling wave solution actually still exists for this parameter regime. We construct a heteroclinic orbit passing through the wall of singularities via a folded saddle canard point onto a repelling slow manifold. The orbit leaves this manifold via the fast dynamics and lands on the attracting slow manifold, finally connecting to its end state. This new travelling wave is no longer smooth but exhibits a sharp front or shock. Finally, we identify regions in parameter space where we expect that similar solutions exist. Moreover, we discuss the possibility of more exotic solutions.

Design and implementation of unified communications as a service based on the OpenStack cloud environment

Cloud Computing, based on early virtual computer concepts and technologies, is now itself a maturing technology in the marketplace and it has revolutionized the IT industry, being the powerful platform that many businesses are choosing to migrate their in-premises IT services onto. Cloud solution has the potential to reduce the capital and operational expenses associated with deploying IT services on their own. In this study, we have implemented our own private cloud solution, infrastructure as a service (IaaS), using the OpenStack platform with high availability and a dynamic resource allocation mechanism. Besides, we have hosted unified communication as a service (UCaaS) in the underlying IaaS and successfully tested voice over IP (VoIP), video conferencing, voice mail and instant messaging (IM) with clients located at the remote site. The proposed solution has been developed in order to give advice to bussinesses that want to build their own cloud environment, IaaS and host cloud services and applicatons in the cloud. This paper also aims at providing an alternate option for proprietary cloud solutions for service providers to consider.

The Sawa World model : addressing extreme poverty through local solutions and youth empowerment

With an estimated 1.2 billion people worldwide living in extreme poverty, it is critical to find effective long-term solutions. Sawa World is a non-profit organization founded by Daphne Nederhorst in 2005 to empower marginalized youth to document simple, locally created solutions that address this pressing issue. Currently working primarily in Uganda, Sawa World has created a unique model that celebrates powerful solutions generated from within the community to help people living in poverty help themselves. Using inspiring local leaders who themselves come from extreme poverty, Sawa World aims to end extreme poverty from the ground up.

Stigmatization of failed entrepreneurs : prevalence and solutions

This paper investigates why entrepreneurs experience stigma after firm failure and what can be done to reduce it. We use attribution theory as an overarching theoretical framework and hypothesize that entrepreneurs are held more accountable than employees for their unemployment after firm failure irrespective of the circumstances causing the failure. To test this hypothesis we conduct a between group, 2x2 full factorial experiment where the cause of the failure is manipulated. We find that entrepreneurs are held more accountable for firm failure irrespective of the circumstances causing the failure and that respondents who view failure as an inherent risk of firm ownership are less likely to stigmatize failed entrepreneurs.

Revisiting borehole stresses in anisotropic elastic media : comparison of analytical versus numerical solutions

We present a rigorous validation of the analyticalAmadei solution for the stress concentration around arbitrarily orientated borehole in general anisotropic elastic media. First, we revisit the theoretical framework of the Amadei solution and present analytical insights that show that the solution does indeed contain all special cases of symmetry, contrary to previous understanding, provided that the reduced strain coefficients β11 and β55 are not equal. It is shown from theoretical considerations and published experimental data that the β11 and β55 are not equal for realistic rocks. Second, we develop a 3D finite-element elastic model within a hybrid analyticalnumerical workflow that circumvents the need to rebuild and remesh the model for every borehole and material orientation. Third, we show that the borehole stresses computed from the numerical model and the analytical solution match almost perfectly for different borehole orientations (vertical, deviated and horizontal) and for several cases involving isotropic and transverse isotropic symmetries. It is concluded that the analytical Amadei solution is valid with no restrictions on the borehole orientation or elastic anisotropy symmetry.

Degradation of hydroxycinnamic acid mixtures in aqueous sucrose solutions by the Fenton process

The degradation efficiencies and behaviors of caffeic acid (CaA), p-coumaric acid (pCoA) and ferulic acid (FeA) in aqueous sucrose solutions containing the mixture of these hydroxycinnamic acids (HCAs) mixtures were studied by the Fenton oxidation process. Central composite design and multi-response surface methodology were used to evaluate and optimize the interactive effects of process parameters. Four quadratic polynomial models were developed for the degradation of each individual acid in the mixture and the total HCAs degraded. Sucrose was the most influential parameter that significantly affected the total amount of HCA degraded. Under the conditions studied there was < 0.01% loss of sucrose in all reactions. The optimal values of the process parameters for a 200 mg/L HCA mixture in water (pH 4.73, 25.15 °C) and sucrose solution (13 mass%, pH 5.39, 35.98 °C) were 77% and 57% respectively. Regression analysis showed goodness of fit between the experimental results and the predicted values. The degradation behavior of CaA differed from those of pCoA and FeA, where further CaA degradation is observed at increasing sucrose and decreasing solution pH. The differences (established using UV/Vis and ATR-FTIR spectroscopy) were because, unlike the other acids, CaA formed a complex with Fe(III) or with Fe(III) hydrogen-bonded to sucrose, and coprecipitated with lepidocrocite, an iron oxyhydroxide.

Transmittance properties of contact lens multipurpose solutions and their effects on a hydrogel lens

Purpose The aim was to assess the compatibility of different multipurpose solutions (MPSs) with one type of silicone hydrogel (SiH) contact lens by, assessing the changes in both ultraviolet (UV) and visible light transmissibility of the hydrogel lens caused by the MPSs. Methods The light transmittance from 200-700 nm were measured for the lotrafilcon B blister pack solution (BPS), six MPSs namely, ReNuMultiPlus Multi-Purpose Solution (Bausch and Lomb Inc., Rochester NY, USA.); Complete RevitaLens Multi-Purpose (Abbott Medical Optics Inc., Quarryvale Co. Dublin, Ireland); All In One Light (Sauflon Pharmaceuticals Ltd., Twickenham, England); SOLO-care AQUA™ (Ciba Vision Corporation Duluth, Georgia, USA.); Biomedics All-in-one solution (CooperVision, Hamble, UK); and HippiaMultiPlus All-in-one solution (Interojo Inc., Kyeonggi-do, Korea), and a lotrafilcon B SiH lens (before and after storage), using a spectrophotometer. Results The UV transmitted through the BPS and the MPS were similar (p >.05, for all), except for the HippiaMultiPlus which was lower (p < 0.001) by 19.8%. Mean transparency values were statistically (p<.001) significantly different between the BPS and the MPSs. All MP solution/SiH lens combinations resulted in relatively high UV transmittance values especially in the UVC spectrum, and significantly increased (p <.001) the visible light transmittance values of the SiH lens. Greater changes in transparency were observed in the ReNu/SiH lens (28.5%) and the Complete RevitaLens/SiH lens (24.9%) combinations. Conclusion The six MPSs showed significant variations in the transmitted UV and visible light. Similar to the BPS, all MPSs were equally transparent, but showed very poor UVA & UVB attenuation, except for the Hippia MultiPlus. The MPS/SiH lens combinations did not significantly affect the lens transparency but it significant increased the lens transmittance of UV radiation, after storage. Further in-vivo studies are needed to validate if this effect is constant.

Enhancing the auditor's report : to what extent is there support for the IAASB's proposed changes?

This article outlines proposed reforms to auditor reporting currently being considered by the International Auditing and Assurance Standards Board (IAASB), and other key national and transnational standard-setters and regulatory bodies. It adds to recent academic contributions on reforming the auditor’s report by analyzing the 165 stakeholder responses to the IAASB’s 2012 Invitation to Comment: Improving the Auditor’s Report to determine levels of support for the IAASB’s proposed reforms, and the differences, if any, between the views of various respondents based on stakeholder groups (e.g. audit and assurance firms, users, preparers, regulators, etc.) and regional classifications. Guided by insights from communication theory, our results show the levels of stakeholder support for the IAASB’s proposed reforms addressing auditors’ expectations, information and communication gaps are mixed. The strongest overall support was for enhanced auditor reporting on other information attached to, or intended to be read with, the financial statements, and the least supported initiative was including additional information in the auditor’s report about the auditor’s judgements and processes. Whilst overall there is generally consensus across both stakeholder groups and regions concerning the various questions investigated, we highlight where statistically significant differences between groups do exist. Notably, North American respondents were less likely to support a number of the IAASB’s proposed reforms than their counterparts from other regions.

The Threshold Learning Outcome on self-management for the Bachelor of Laws degree : a proposed focus for teaching strategies in the first year law curriculum

The Australian Learning and Teaching Council (ALTC) Discipline Scholars for Law, Professors Sally Kift and Mark Israel, articulated six Threshold Learning Outcomes (TLOs) for the Bachelor of Laws degree as part of the ALTC’s 2010 project on Learning and Teaching Academic Standards. One of these TLOs promotes the learning, teaching and assessment of self-management skills in Australian law schools. This paper explores the concept of self-management and how it can be relevantly applied in the first year of legal education. Recent literature from the United States (US) and Australia provides insights into the types of issues facing law students, as well as potential antidotes to these problems. Based on these findings, I argue that designing a pedagogical framework for the first year law curriculum that promotes students’ connection with their intrinsic interests, values, motivations and purposes will facilitate student success in terms of their personal well-being, ethical dispositions and academic engagement.

High order unconditionally stable difference schemes for the Riesz space-fractional telegraph equation

In this paper, a class of unconditionally stable difference schemes based on the Pad´e approximation is presented for the Riesz space-fractional telegraph equation. Firstly, we introduce a new variable to transform the original dfferential equation to an equivalent differential equation system. Then, we apply a second order fractional central difference scheme to discretise the Riesz space-fractional operator. Finally, we use (1, 1), (2, 2) and (3, 3) Pad´e approximations to give a fully discrete difference scheme for the resulting linear system of ordinary differential equations. Matrix analysis is used to show the unconditional stability of the proposed algorithms. Two examples with known exact solutions are chosen to assess the proposed difference schemes. Numerical results demonstrate that these schemes provide accurate and efficient methods for solving a space-fractional hyperbolic equation.

A Novel High Order Space-Time Spectral Method for the Time Fractional Fokker--Planck Equation

The fractional Fokker-Planck equation is an important physical model for simulating anomalous diffusions with external forces. Because of the non-local property of the fractional derivative an interesting problem is to explore high accuracy numerical methods for fractional differential equations. In this paper, a space-time spectral method is presented for the numerical solution of the time fractional Fokker-Planck initial-boundary value problem. The proposed method employs the Jacobi polynomials for the temporal discretization and Fourier-like basis functions for the spatial discretization. Due to the diagonalizable trait of the Fourier-like basis functions, this leads to a reduced representation of the inner product in the Galerkin analysis. We prove that the time fractional Fokker-Planck equation attains the same approximation order as the time fractional diffusion equation developed in [23] by using the present method. That indicates an exponential decay may be achieved if the exact solution is sufficiently smooth. Finally, some numerical results are given to demonstrate the high order accuracy and efficiency of the new numerical scheme. The results show that the errors of the numerical solutions obtained by the space-time spectral method decay exponentially.

Generalized element load method for first- and second-order element solutions with element load effect

The finite element method in principle adaptively divides the continuous domain with complex geometry into discrete simple subdomain by using an approximate element function, and the continuous element loads are also converted into the nodal load by means of the traditional lumping and consistent load methods, which can standardise a plethora of element loads into a typical numerical procedure, but element load effect is restricted to the nodal solution. It in turn means the accurate continuous element solutions with the element load effects are merely restricted to element nodes discretely, and further limited to either displacement or force field depending on which type of approximate function is derived. On the other hand, the analytical stability functions can give the accurate continuous element solutions due to element loads. Unfortunately, the expressions of stability functions are very diverse and distinct when subjected to different element loads that deter the numerical routine for practical applications. To this end, this paper presents a displacement-based finite element function (generalised element load method) with a plethora of element load effects in the similar fashion that never be achieved by the stability function, as well as it can generate the continuous first- and second-order elastic displacement and force solutions along an element without loss of accuracy considerably as the analytical approach that never be achieved by neither the lumping nor consistent load methods. Hence, the salient and unique features of this paper (generalised element load method) embody its robustness, versatility and accuracy in continuous element solutions when subjected to the great diversity of transverse element loads.