Dentinhaftung von Zementen. Der Haftverbund von Zementen mit Dentin in Kombination mit verschiedenen indirekten Restaurationsmaterialien

Einleitung: Die Anzahl zahnärztlicher Zemente sowie Restaurationsmaterialien steigt stetig. Die richtige Zementwahl für einen zuverlässigen Haftverbund zwischen Restaurationsmaterial und Zahnsubstanz ist von Interesse für den Kliniker. Ziel der vorliegenden in vitro-Studie war es daher, den Dentinhaftverbund von verschiedenen Zementen in Kombination mit verschiedenen indirekten Restaurationsmaterialien zu untersuchen. Material und Methoden: Zylindrische Probekörper aus sechs Restaurationsmaterialien (Goldlegierung, Titan, Feldspat-Keramik, Leuzit-Glaskeramik, Zirkon sowie Komposit) wurden an einem Ende plangeschliffen und sandgestrahlt. Die Zylinder aus Feldspat-Keramik und Leuzit-Glaskeramik wurden zusätzlich mit Flusssäure geätzt und silanisiert. Die Zylinder wurden anschliessend mit acht Zementen auf plangeschliffenes Dentin extrahierter menschlicher Zähne zementiert (ein Zink-Phosphatzement (DeTrey Zinc), ein konventioneller Glasionomerzement (Fuji I), ein kunststoffmodifizierter Glasionomerzement (Fuji Plus), ein "etch-&-rinse" Kompositzement (Variolink II), zwei "self-etch" Kompositzemente (Panavia F2.0 und Multilink) und zwei "self-adhesive" Kompositzemente (RelyX Unicem Aplicap und Maxcem)). Nach einwöchiger Wasserlagerung bei 37°C wurden die Dentinhaftwerte der Zylinder (n=8 pro Gruppe) mittels Scherkraft-Test gemessen. Zusätzlich wurde das Frakturmuster unter dem Lichtmikroskop bestimmt. Die Haftwerte wurden mittels zweifaktorieller ANOVA und einem post hoc-Test analysiert (Signifikanzniveau α = 0.05). Resultate: Sowohl das Restaurationsmaterial wie auch der Zement hatten einen statistisch signifikanten Effekt auf den Haftverbund. Der Zink-Phosphatzement sowie beide Glasionomerzemente zeigten die niedrigsten Haftwerte. Die höchsten Haftwerte wurden mit beiden "self-etch" und einem der zwei "self-adhesive" Kompositzementen erzielt. Im Allgemeinen variierte das Frakturmuster deutlich je nach Zement und Restaurationsmaterial. Schlussfolgerungen: Der Dentinhaftverbund wurde stärker vom Zement beeinflusst als vom Restaurationsmaterial. Die Kompositzemente erzielten im Grossen und Ganzen die höchsten Haftwerte.

Livre du Kahal : Matériaux pour étudier le judaisme en Russie et son influence sur les populations parmi lesquelles il existe

par J. Brafman. Trad. par. T. P.

Male and female routes to success

Much of the recent interest in educational gender differences is based on differences in academic performance. Several studies have shown that young women now out-perform males in terms of school grades and university degrees. But while there is a lot of research into the reasons for this shift, and into gender gaps in reading and maths achievement, little research has been done on the consequences of these differences in educational and early occupational success. - See more at: https://cerp.aqa.org.uk/perspectives/male-and-female-routes-success#sthash.HR8fFTen.dpuf

Two Distinct Oral Routes of Misoprostol in Mifepristone Medical Abortion. A Randomized Controlled Trial

http://pdfs.journals.lww.com/greenjournal/2008/12000/Two_Distinct_Oral_Routes_of_Misoprostol_in.18.pdf?token=method|ExpireAbsolute;source|Journals;ttl|1369920806057;payload|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;hash|BM4+yd44xH/IRKdsrM1Wzg==

Model of interactive visualization of diffusion processes from different strains, and source routes and spatial diffusion of capuchin monkeys over the past 6 million years

Source routes and Spatial Diffusion of capuchin monkeys over the past 6 million years, rebuilt in the SPREAD 1.0.6 from the MCC tree. The map shows the 10 different regions to which distinctive samples were associated. The different transmission routes have been calculated from the average rate over time. Only rates with Bayes factor> 3 were considered as significantly different from zero. Significant diffusion pathways are highlighted with color varying from dark brown to red, being the dark brown less significant rates and deep red the most significant rates.

Designing Rapid Transit Network Design with Alternative routes

The aim of this paper is to propose a model for the design of a robust rapid transit network. In this paper, a network is said to be robust when the effect of disruption on total trip coverage is minimized. The proposed model is constrained by three different kinds of flow conditions. These constraints will yield a network that provides several alternative routes for given origin–destination pairs, therefore increasing robustness. The paper includes computational experiments which show how the introduction of robustness influences network design

Reconstructing the Timing and Dispersion Routes of HIV-1 Subtype B Epidemics in The Caribbean and Central America: A Phylogenetic Story.

The Caribbean and Central America are among the regions with highest HIV-1B prevalence worldwide. Despite of this high virus burden, little is known about the timing and the migration patterns of HIV-1B in these regions. Migration is one of the major processes shaping the genetic structure of virus populations. Thus, reconstruction of epidemiological network may contribute to understand HIV-1B evolution and reduce virus prevalence. We have investigated the spatio-temporal dynamics of the HIV-1B epidemic in The Caribbean and Central America using 1,610 HIV-1B partial pol sequences from 13 Caribbean and 5 Central American countries. Timing of HIV-1B introduction and virus evolutionary rates, as well as the spatial genetic structure of the HIV-1B populations and the virus migration patterns were inferred. Results revealed that in The Caribbean and Central America most of the HIV-1B variability was generated since the 80 s. At odds with previous data suggesting that Haiti was the origin of the epidemic in The Caribbean, our reconstruction indicated that the virus could have been disseminated from Puerto Rico and Antigua. These two countries connected two distinguishable migration areas corresponding to the (mainly Spanish-colonized) Easter and (mainly British-colonized) Western islands, which indicates that virus migration patterns are determined by geographical barriers and by the movement of human populations among culturally related countries. Similar factors shaped the migration of HIV-1B in Central America. The HIV-1B population was significantly structured according to the country of origin, and the genetic diversity in each country was associated with the virus prevalence in both regions, which suggests that virus populations evolve mainly through genetic drift. Thus, our work contributes to the understanding of HIV-1B evolution and dispersion pattern in the Americas, and its relationship with the geography of the area and the movements of human populations.

Methodology for kinematic cycle characterization of vehicles with fixed routes in urban areas

This paper analyses the driving cycles of a fleet of vehicles with predetermined urban itineraries. Most driving cycles developed for such type of vehicles do not properly address variability among itineraries. Here we develop a polygonal driving cycle that assesses each group of related routes, based on microscopic parameters. It measures the kinematic cycles of the routes traveled by the vehicle fleet, segments cycles into micro-cycles, and characterizes their properties, groups them into clusters with homogeneous kinematic characteristics within their specific micro-cycles, and constructs a standard cycle for each cluster. The process is used to study public bus operations in Madrid.

Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes

Self-passivating tungsten based alloys will provide a major safety advantage compared to pure tungsten when used as first wall armor of future fusion reactors, due to the formation of a protective oxide layer which prevents the formation of volatile and radioactive WO3 in case of a loss of coolant accident with simultaneous air ingress. Bulk WCr10Ti2 alloys were manufactured by two different powder metallurgical routes: (1) mechanical alloying (MA) followed by hot isostatic pressing (HIP) of metallic capsules, and (2) MA, compaction, pressureless sintering in H2 and subsequent HIPing without encapsulation. Both routes resulted in fully dense materials with homogeneous microstructure and grain sizes of 300 nm and 1 μm, respectively. The content of impurities remained unchanged after HIP, but it increased after sintering due to binder residue. It was not possible to produce large samples by route (2) due to difficulties in the uniaxial compaction stage. Flexural strength and fracture toughness measured on samples produced by route (1) revealed a ductile-to-brittle-transition temperature (DBTT) of about 950 °C. The strength increased from room temperature to 800 °C, decreasing significantly in the plastic region. An increase of fracture toughness is observed around the DBTT.

Les champignons (fungi, hyménomycètes) qui croissent en France. Description et iconographie propriétés utiles ou vénéneuses.

Text

Two routes of chlorophyllide synthesis that are differentially regulated by light in barley (Hordeum vulgare L.).

NADPH-protochlorophyllide oxidoreductase (POR; EC 1.6.99.1) catalyzes the only known light-dependent step in chlorophyll synthesis of higher plants, the reduction of protochlorophyllide (Pchlide) to chlorophyllide. In barley, two distinct immunoreactive POR proteins were identified. In contrast to the light-sensitive POR enzyme studied thus far (POR-A), levels of the second POR protein remained constant in seedlings during the transition from dark growth to the light and in green plants. The existence of a second POR-related protein was verified by isolating and sequencing cDNAs that encode a second POR polypeptide (POR-B) with an amino acid sequence identity of 75% to the POR-A. In the presence of NADPH and Pchlide, the in vitro-synthesized POR-A and POR-B proteins could be reconstituted to ternary enzymatically active complexes that reduced Pchlide to chlorophyllide only after illumination. Even though the in vitro activities of the two enzymes were similar, the expression of their genes during the light-induced transformation of etiolated to green seedlings was distinct. While the POR-A mRNA rapidly declined during illumination of dark-grown seedlings and soon disappeared, POR-B mRNA remained at an approximately constant level in dark-grown and green seedlings. Thus these results suggest that chlorophyll synthesis is controlled by two light-dependent POR enzymes, one that is active only transiently in etiolated seedlings at the beginning of illumination and the other that also operates in green plants.

Matériaux pour la faune du Congo : Poissons nouveaux / par G. A. Boulenger ; planches dessinées, sous la direction de l'auteur, par P. J. Smit et J. Green.

ser.1:t.1:fasc.2